计算溶液所需的质量、体积或浓度。
BioReagent,适用于植物细胞培养 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
避光,室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
White培养基整体采用低盐配比体系,整体渗透压更为温和,能够有效弱化高盐环境带来的生理胁迫影响,营造更贴合根系自然发育规律的生长微环境。该培养基问世已久,经过长期大量科研实践验证,是植物离体生根培养领域沿用多年、认可度很高的经典专用基础培养基,适用品类覆盖面较广,适配各类对盐分较为敏感的植物材料生根诱导相关试验开展。
产品成分:
|
使用方法
1、配制溶解:精确称取本品21.26 g,加入1 L蒸馏水或去离子水中,充分搅拌至粉末完全溶解,配制成均匀的培养基溶液。
2、pH调节(可选):若需调节pH值,可在灭菌前使用稀NaOH或者稀HCl溶液进行微调。植物组织培养常用pH范围为5.5~5.8,具体参照实验方案执行。调节时需逐滴添加、边加边搅拌并实时检测pH,避免过度反复调节。
3、灭菌处理:将配制好的培养基分装至合适培养容器,于116 ℃高压蒸汽灭菌30 min。
4、冷却使用:灭菌后置于洁净无菌环境自然冷却至室温,全程保持无菌操作,即可用于植物组织培养实验。
注意事项
1、本品为植物组织培养全无机盐培养基,建议采用室温水溶解后再进行高压灭菌,不建议加热溶解;灭菌后溶液若出现少量沉淀为正常现象,不影响实验使用。
2、产品需置于室温、避光环境密封保存,有效期3年。
3、本产品仅供科研实验使用,严禁用于医药、临床诊断与治疗、食品、化妆品等相关领域,请勿存放于普通住宅区。
4、因用户非正常操作、违规使用本产品所产生的一切意外与损失,本公司不承担相关责任。
White Medium adopts an overall low-salt formula with moderate osmotic pressure. It can effectively mitigate physiological stress caused by high-salt surroundings and construct a growth microenvironment more consistent with the natural developmental characteristics of plant roots. Developed a long time ago and verified by extensive long-term scientific research and practical trials, it is a highly recognized classic dedicated basal medium that has been widely used for many years in the field of in vitro plant rooting culture. With a broad spectrum of applicable plant varieties, it fits experiments related to root induction of various salt-sensitive plant materials.
Product Composition:
|
Instructions for Use
1. Preparation and Dissolution: Accurately weigh 21.26 g of this product, add it to 1 L of distilled or deionized water, and stir thoroughly until the powder dissolves completely to prepare a homogeneous medium solution.
2. pH Adjustment (Optional): If pH adjustment is required, finely tune the pH with dilute NaOH or dilute HCl solution before sterilization. The commonly applicable pH range for plant tissue culture is 5.5~5.8, subject to specific experimental protocols. Add the solution dropwise while stirring and monitor the pH in real time to avoid over-adjustment.
3. Sterilization Treatment: Dispense the prepared medium into appropriate culture vessels, then autoclave at 116 °C under high-pressure steam for 30 minutes.
4. Cooling and Application: After sterilization, let the medium cool naturally to room temperature in a clean sterile environment, mix gently, and maintain aseptic technique throughout all operations. The medium is then ready for plant tissue culture experiments.
Precautions:
1. This product is a full inorganic salt medium for plant tissue culture. It is recommended to dissolve the powder in room-temperature water prior to autoclaving; heating for dissolution is not advised. Minor precipitation after sterilization is normal and will not interfere with experimental results.
2. Store the product hermetically sealed at room temperature away from light. The shelf life is 3 years.
3. This product is for research laboratory use only. It is strictly prohibited for medical purposes, clinical diagnosis and treatment, food, cosmetics and other related fields. Do not store it in residential areas.
4. Our company shall not be liable for any accidents or losses arising from improper operation or unauthorized use of this product by users.
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | W1524329 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 Suitable for plant cell culture 级别指南 →