摘要
The development of low-cost, high-performance, flexible and remotely monitored self-powered sensor systems present significant challenges in field of wearable electronics. In this paper, two-dimensional layered MXene with porous surface and wide interlayer spacing was synthesized by hydrazine-ice crystal-assisted technology. And nanocomposite (P-MX) with interweaving 1D polyaniline fibers evenly between layers and surface of 2D MXene was synthesized through interface polymerization. By simple printing process, the wearable gas sensor and supercapacitor were fabricated easily. Simulation calculations and experiments conducted on samples revealed that, compared to conventional methods, the synthesized composite exhibited higher binding energy (−2.46 eV) and charge transfer frequency (0.91 e − ) at interfaces. Meanwhile, owing to the synergistic effect between composite's structure and surface functional groups, alongside the formation of interfacial heterojunctions, the nanocomposite showed remarkable energy storage capabilities (specific capacitance reaching 961.5 F/g at a current density of 1 A/g, with a capacitance retention exceeding 91% after 10,000 consecutive cycles) and NH 3 sensitivity (response exceeding 488% within 91 s at 10 ppm, with a sensitivity to 1869 Ω/ppm). Finally, a portable self-powered sensor system was developed based on microcontroller and bluetooth technology, enabling non-invasive real-time detection of NH 3 breath biomarkers. This work is expected to provide direction and a theoretical foundation for the design of other wearable sensors.
危险品化学品经营许可证(带存储)