摘要
The thermochemical energy storage system (TCES) driven by the calcium looping is expected to enhance the efficiency of the next-generation concentrated solar power (CSP) plants. To address issues such as low optical absorption capacities of natural calcium-based materials, sintering and deactivation at high temperatures, and difficulties in forming high-strength particles, this paper synthesizes hierarchically doped calcium-based particles by a rolling forming method. The particles consist of an Al-rich core and a uniformly distributed outer shell containing four elements: Ca, Mn, Fe, and Mg. The particles exhibit an average solar absorptance of up to 90.41 % and a maximum mechanical compressive strength of 35.83 N. After a 120-hour attrition test, the particles exhibited a mass loss of only 4.05 %. In cyclic testing at 800°C, the conversion rate of the particles decreased by only 8.58 % after 10 cycles, remaining at 81.42 %, while the energy storage density decreased by only 102.91 kJ/kg. The heat storage characteristics of the prepared particles were evaluated with a sliding-bed particle receiver. Under total radiant power of 3.35 kW and an outlet flow rate of 0.85 g/s, the highest conversion rate of the calcination reaction reached 94.08 %, and the maximum outlet temperature of the particles reached 960.3°C. This work prepared high-performance hierarchically doped calcium-based particles, providing a reference for the application of TCES driven by calcium looping under solar radiation.
危险品化学品经营许可证(带存储)