摘要
Drinking water sources in shale gas extraction areas face serious pollution risks from shale gas wastewater leak, which cannot be effectively addressed by conventional purification processes at local supply water plants. In this paper, a series of positively charged nanofiltration (NF) membranes with ridge-like structures were successfully prepared via interfacial polymerization. The performance of a coupled treatment process using these new NF membranes as the core unit was evaluated. Chemical structural analysis confirmed the formation of a dense polyamide layer through the reaction of melamine, piperazine, and branched polyethyleneimine (PEI) with trimellitic anhydride. The formation mechanism of ridge-like structures was elucidated using extended Derjaguin-Landau-Verwey-Overbeek theory. By varying the molecular weight of branched PEI, the hydrophilicity, zeta potential, and pore size of the branched PEI modified membranes were tuned. The separation factors for Cl − /SO2–4 and Na + /Mg 2+ achieved by the 130,000 Da branched PEI modified membrane reached 44.7 and 35.8, respectively, enabling highly selective separation of divalent ions. When applied to the emergency purification of polluted drinking water sources, this membrane achieved removal rates of 40.1% total dissolved solids, 84.5% for dissolved organic carbon, 80.5% for UV₂₅₄ absorbance, and 73.3% for hardness. The NF effluent retained essential monovalen ions while removing most high-valent ions. Importantly, the anti-scaling mechanism was attributed to the synergistic effect of positively charged groups and reduced pore size, which prevented scaling ions from directly contacting the membrane surface.
危险品化学品经营许可证(带存储)