已核实 DOI 相关产品: 9

Synergistic modulation of polyamide microstructure and surface charge via in-situ anchored metal-organic frameworks scaffolds for high-performance nanofiltration

Journal 2026 · IF 5.4 · 发表于 2026 年 7 月 13 日
作者: Jie Liang,Weijiao Jiang,Shihao Bai,Jingke Pei,Zhihui Xie,Jian Kang,Ming Xiang,Yue Zhang
阅读全文 在 PubMed 查看

摘要

In-situ growth of ZIF-67 regulated IP diffusion kinetics and polyamide microstructure. • Scaffold-mediated IP achieved a high cross-linking degree (81.7%) and shifted IEP. • Surface wettability and interfacial free energy were significantly improved. • The optimal PSf@ZIF-67-PA(2) composite membrane exhibited high permeability (13.02 LMH/bar) and > 99% salt rejection. • The PSf@ZIF-67-PA composite membrane showed excellent stability during 180-h filtration. The typical trade-off between permeability and selectivity in thin-film nanocomposite (TFN) membranes often stems from the non-selective defects caused by nanomaterial agglomeration and the uncontrolled diffusion of monomers during interfacial polymerization (IP). Herein, a novel TFN membrane, PSf@ZIF-67-PA, was developed by the in-situ growth of zeolite imidazolate framework-67 (ZIF-67) nanocrystals on a polysulfone support followed by IP. Instead of acting merely as pore fillers, the uniform ZIF-67 interlayer effectively modulated the IP process by altering the surface hydrophilicity and monomer diffusion kinetics, resulting in a PA layer with optimized cross-linking density and surface morphology. AFM and contact-angle analyses revealed significantly improved surface wettability (42.6°) and enhanced solid-liquid interfacial free energy (111.24 mJ·m ‐2 ). The incorporated ZIF-67 nanocrystals served as physical scaffolds to construct a 3D rough surface and introduced fast-transport interfacial nano-channels at the ZIF-PA boundaries, creating preferential pathways for water molecules while ensuring a robust selective layer. Consequently, the optimized PSf@ZIF-67-PA composite membrane exhibited a molecular weight cut-off (MWCO) of 360 Da and high rejection for divalent salts (> 99% for Na₂SO₄ and MgSO₄), alongside a pure-water flux of 78.16 L·m ‐2 ·h - 1 at 6.0 bar (corresponding to a permeability of 13.02 L·m ‐2 ·h - 1 ·bar - 1 ). This study provides insights into the structural tuning of PA layers via in-situ MOFs anchoring for high-performance saline wastewater remediation. Download: Download high-res image (261KB) Download: Download full-size image

本研究中使用的阿拉丁产品

9 款产品在本文中被引用