摘要
Poly(aryl piperidinium) anion-exchange membrane (AEM) serves as the core component of energy-efficient anion-exchange membrane water electrolysis (AEMWE). Recently, the development of a backbone structure with a high-density cationic group has emerged as a promising strategy to optimize the OH– transport pathway of poly(aryl piperidinium) AEM, but there is a trade-off between dimensional stability and ionic conductivity. To address this challenge, we here report twisted cross-shaped and microporous poly(aryl piperidinium) AEMs fabricated by incorporating the dipyridine-fluorene side chain and a rigid spirofluorene monomer with multiple reactive sites into the poly(aryl piperidinium) backbone. On the one hand, the rigidly twisted spirofluorene offered a unique cross-shaped architecture that not only suppressed the excessive swelling induced by the cationic side chain but also increased the free volume within the AEMs. On the other hand, the rigid cross-linked network significantly enhanced the microphase separation morphology of AEMs, which, in turn, effectively improved the migration rate of OH–. It was found that the QPTPFSN-1% AEM achieved a high ionic conductivity of 141.93 mS/cm at 80 °C and maintained a much lower swelling resistance of 10.47% compared with the previously reported poly(aryl piperidinium)-based AEMs. When immersed in a 1 M NaOH solution at 60 °C for over 1200 h, the conductivity loss of AEMs was maintained at ∼15%, demonstrating robust chemical stability. Furthermore, the AEMWE equipped with QPTPFSN-1% AEM could deliver a transient current density of 1.91 A/cm2 at 60 °C under a voltage of 2.2 V. Additionally, it can operate stably for 215 h at a constant current density of 1 A/cm2 without any performance degradation. This study proposed an alternative strategy to prepare durable and highly conductive poly(aryl piperidinium) AEMs that can be potentially applied to high-efficiency AEMWE.
危险品化学品经营许可证(带存储)