已核实 DOI 相关产品: 0

One-Step Iron-Powder Reduction of Graphene Oxide in an Aqueous Dispersion for Reduced Graphene Oxide Electrodes toward Aqueous Supercapacitors

Journal 2026 · IF 5.5 · 发表于 2026 年 6 月 1 日
作者: Zhoucheng Han,Yajie Li,Jin Yang,Yupeng Guo
阅读全文 在 PubMed 查看

摘要

A scalable and environmentally benign strategy is proposed to convert graphene oxide (GO) into reduced graphene oxide (rGO) directly in water. Instead of employing hazardous reductants or isolating GO solids prior to reduction, iron powder is introduced into a GO dispersion prepared by a modified Hummers route, enabling one-step in situ reduction. By varying the iron dosage (4−12 g) for a GO dispersion prepared from 1 g of a graphite precursor, a set of rGO samples is obtained and systematically examined using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman analysis, X-ray photoelectron spectroscopy, and N2 sorption. Increasing the iron amount from 4 to 10 g progressively enhances deoxygenation while building a percolated porous framework dominated by 2−6 nm pores. When the dosage is further raised to 12 g, the defect signatures and the accessible surface area/pore volume show a slight decline, indicating diminishing returns at excessive addition. Owing to the balanced defect density and porosity, rGO(10) delivers the best electrochemical response in 6 M KOH: 251.4 F/g at 1 A/g, 71.73% capacitance retention at 50 A/g, and 87.42% retention after 10,000 cycles at 20 A/g (three-electrode configuration). A symmetric rGO(10)//rGO(10) device reaches 9.65 Wh/kg at 25 kW/kg and maintains 88.73% capacitance after 20,000 cycles at 20 A/g. This work highlights iron-assisted in-water reduction as a practical route to rGO electrodes for high-rate aqueous supercapacitors.