已核实 DOI 相关产品: 0

Laser Cladding Fabrication of Self-Lubricating High-Wear-Resistance Coatings: Microstructural Evolution and Wear Mechanisms

Journal 2026 · IF 3.6 · 14(6): 231 · 发表于 2026 年 6 月 8 日
作者: Linkai He,Xingqiang Wu,Zhenneng Chen,Kaiqiang Zhang,Qingnan Men,Yun Tian,Meilu Yu
阅读全文 在 PubMed 查看

摘要

In pursuit of a composite coating for tunnel boring machine (TBM) disc cutters that offers both high wear resistance and self-lubricating functionality, we fabricated Fe-based composite coatings reinforced with WC and MoS2through laser cladding. Seven coating compositions with systematically tailored MoS2contents were prepared to investigate the concentration-dependent effects of MoS2on microstructural evolution and tribological properties, and to evaluate their performance under various rock-contact conditions. XPS results reveal that MoS2decomposed during laser cladding, leading to the in situ formation of metal sulfides in the Fe-based matrix. These sulfides, characterized by low shear strength, readily form a continuous and stable lubricating tribofilm at the hob–rock interface. The tribofilm effectively lowers the coefficient of friction (COF), curtails friction-induced energy dissipation and surface degradation, and ultimately enhances the wear resistance of the disc cutter. Simultaneously, the rapid non-equilibrium solidification inherent in laser cladding stabilizes metastable phases, which refine the microstructure, improve densification, and bolster phase stability. Among the tested compositions, the coating containing 4 wt.% MoS2exhibited the most favorable dry-sliding tribological performance, as evidenced by an average coefficient of friction of 0.409, a hardness of 749.5 HV1, and consistently low wear mass losses below 2.1 × 10−3g under different rock-contact conditions. Mechanistically, XRD and SEM analyses further attributed the superior performance of the 4 wt.% MoS2coating to concurrent strengthening mechanisms: grain refinement, dispersion strengthening from uniformly distributed second-phase particles, and increased dislocation density. Collectively, these effects substantially improve the wear resistance of the disc cutter, thereby extending its durability and service life under complex operating conditions.