摘要
Conventional stormwater control measures (SCMs) exhibit limited efficiency in the removal of emerging organic contaminants (EOCs) such as benzotriazole (BTA), bisphenol A (BPA), and sulfamethoxazole (SMX). This study introduced porous carbonized wood (PCW) as a novel sand filter amendment, focusing on particle size effects. The synthesized PCW exhibited a high surface area of 635.86 m 2 /g, which also retained wood's inherent channel structure. Batch experiments exhibited maximum adsorption capacities of 200.15, 174.01, and 165.06 mg/g for BTA, BPA, and SMX at optimal pH = 7, respectively. Moreover, sand column studies revealed a critical trade-off whereby smaller PCW (0.3–0.6 mm) demonstrated superior EOCs retention (>90% removal for 70 h) but low permeability (28.5 mL/min), while large-sized PCW (3–4 mm) achieved a high water flux (64.5 mL/min) and reduced EOCs retention (~50% removal for 70 h). The variation in PCW particle size directly influenced the porosity of the sand column, as determined by mercury intrusion porosimeter analysis. Another, coexisting ions and humic acid had minimal impact on EOCs removal. FTIR and XPS analyses confirmed that the adsorption of EOCs onto PCW was predominantly governed by physisorption, involving van der Waals forces and hydrogen bonding. Lastly, three EOCs were largely retained in the upper layer (1–3 cm depth) of the sand column, and SMX and BPA exhibited faster breakthrough and higher mobility than BTA in PCW/sand columns, primarily due to their lower adsorption affinity, as confirmed by Hydrus-1D modeling. This work provided fundamental insights into the trade-off between adsorption efficiency and hydraulic performance, offering practical guidance for optimizing carbonaceous amendments in stormwater filtration systems.
危险品化学品经营许可证(带存储)