Journal of Energy Storage
·
2024
·
IF 8.9
Hao Chen,Si-Miao Huang,Dong-Ting Zhang,Min-Peng Li,Chen-Yang Li,Yu-Ping Qiu,Xiao-Rui Wang,Tian-Peng Xu,Mao-Cheng Liu
The self-stacking of MXenes-Ti 3 CN limits the accessibility of nanochannels , reduces the ion diffusion kinetics, and hinders its application in alkali metal ion storage field. This study proposes a point-to-point mortise and tenon joining strategy to fabricate a composite structure of 1,4-phenylenediacetic acid-Ti 3 CN (1,4-PDEA-Ti 3 CN) by grafting rigid and flexible 1,4-phenylenediacetic acid (1,4-PDEA) into the amino-functionalized Ti 3 CN interlayers. The rigid and flexible 1,4-PDEA contributes to a pillar effect in the layered structure of Ti 3 CN, which is benefit to prevent the self-stacking and maintain a stable 2D layered structure. As a result, the interlayer spacing of Ti 3 CN is expanded from 1.20 to 1.46 nm and the Na + diffusion coefficient is improved from 1.16 × 10 −6 to 1.99 × 10 −6 cm 2 s −1 after point-to-point 1,4-PDEA grafting. The 1,4-PDEA-Ti 3 CN achieves a reversible discharge specific capacity of 202.3 mAh g −1 at a current density of 0.1 A g −1 after 770 cycles. Even at a high current density of 5 A g −1 , the 1,4-PDEA-Ti 3 CN still possesses a reversible discharge specific capacity of 137 mAh g −1 and it still maintains the high specific capacity of 256.1 mAh g −1 when the current density comes back to 0.1 A g −1 . This point-to-point mortise and tenon joining strategy provides a novel approach for designing other 2D energy storage materials with long cycle stability and high-rate capability.
研究领域:
材料科学
·
电化学储能
·
纳米材料
·
能源化学
·
二维材料
✓ 已验证
DOI
高影响因子
Results in Physics
·
2023
·
IF 5.3
Meijie Zhu,Hua Xu,Zuoquan Tan,Le Wang
Large-area and uniform two-dimensional (2D) non-layered α-MnSe was successfully synthesized via the molecular sieve modified chemical vapor deposition (CVD). The molecular sieve serves both as a filter and a container to controllable release the Mn precursor in a stable and much lower concentration, leading to the uniform growth of 2D α-MnSe flakes. The thickness, crystalline quality and uniformity of the as-grown α-MnSe are further characterized. Our study validated the positive role of molecular sieve in the controllable growth of 2D α-MnSe, which is believed to be applicable to other non-layered transition metal chalcogenides (TMCs) and will be beneficial for their further applications in electronics, optoelectronics and spintronics.
研究领域:
材料科学
·
纳米科技
·
凝聚态物理
·
无机化学
✓ 已验证
DOI
高影响因子
Small
·
2022
·Vol. 19
·期 2
·2205353
·
IF 15.153
Fapeng Sun,Wenting Hong,Xu He,Chuanyong Jian,Qiankun Ju,Qian Cai,Wei Liu
β-Ag 2 Te has attracted considerable attention in the application of electronics and optoelectronics due to its narrow bandgap, high mobility, and topological insulator properties. However, it remains a significant challenge to synthesize 2D Ag 2 Te because of the non-layered structure of Ag 2 Te. Herein, the synthesis of large-size, ultrathin single crystal topological insulator 2D Ag 2 Te via the van der Waals epitaxial method for the first time is reported. The 2D Ag 2 Te crystal exhibits p-type conduction behavior with high carrier mobility of 3336 cm 2 V −1 s −1 at room temperature. Taking advantage of the high mobility and perfect electron structure of Ag 2 Te, the Ag 2 Te/WSe 2 heterojunctions are fabricated via mechanical stacking and show an ultrahigh rectification ratio of 2 × 10 5 . Ag 2 Te/WSe 2 photodetector also exhibits self-driven properties with a fast response speed (40 µs/60 µs) in the near-infrared region. High responsivity (219 mA W −1 ) and light ON/OFF ratio of 6 × 10 5 are obtained under the photovoltaic mode. The overall performance of the Ag 2 Te/WSe 2 photodetector is significantly competitive among all reported 2D photodetectors. These results indicate that 2D Ag 2 Te is a promising candidate for future electronic and optoelectronic applications.
研究领域:
凝聚态物理
·
材料科学
·
纳米电子学
·
光电子学
·
半导体器件
·
二维材料科学
✓ 已验证
DOI
高影响因子
Advanced Electronic Materials
·
2022
·Vol. 8
·期 7
·2101383
·
IF 7.633
Changsheng Zhu,Bin Lei,Fanbao Meng,Jianhua Cui,Weizhuang Zhuo,Wenxiang Wang,Ziji Xiang,Xianhui Chen
Ferromagnetic order in 2D2D materials has triggered widespread interest because of their applications in spintronic devices. Monolayer 1T-VSe 2 , as a recently emerged candidate of 2D2D ferromagnetic material, exhibits complicated behaviors that contradict the theoretical predictions. In this work, a systematic investigation is presented on the evolution of the transport properties in VSe 2 thin flakes controlled by gate voltage. Notably, for the first time, a paramagnetic-to-ferromagnetic transition is realized in a VSe 2 thin flake using a field-effect transistor setup with solid ion conductor of polycrystalline Li 1+ x + y Al x (Ti 2− y Ge y )P 3− z Si z O 12 serving as the gate dielectric. The Curie temperature determined from the electrical transport measurements is ≈40 K. The electric-field-controlled ferromagnetism in exfoliated VSe 2 flakes provides an excellent platform for developing advanced spintronics as well as investigating unusual emergent physics in 2D systems.
研究领域:
凝聚态物理
·
材料科学
·
纳米电子学
·
自旋电子学
·
低维系统
✓ 已验证
DOI
高影响因子
CHINESE CHEMICAL LETTERS
·
2019
·Vol. 31
·期 8
·2099-2102
·
IF 3.839
Xin Yu,Ding Wang,Yuqiu Wang,Ji Yan,Xianying Wang
In this work, the two-dimensional MoS 2 film was prepared by sulfuring the molybdenum atomic layer on SiO 2 /Si substrate. The reaction temperature, heating rate, holding time and carrier gas flow rate were investigated comprehensively. The quality of MoS 2 film was characterized by optical microscopy, atomic force microscopy, Raman and photoluminescence spectroscopy. The characterization results showed that the optimum synthesis parameters were heating rate of 25 °C/min, reaction temperature of 750 °C, holding time of 30 min and carrier gas velocity of 100 sccm. The MoS 2 gas sensor was fabricated and its gas sensing performance was tested. The test results indicated that the sensor had a good response to both reducing gas (NH 3 ) and oxidizing gas (NO 2 ) at room temperature. The sensitivity to 100 ppm of NO 2 was 31.3%, and the response/recovery times were 4 s and 5 s, respectively. In addition, the limit of detection could be as low as 1 ppm. This work helps us to develop low power and integrable room temperature NO 2 sensors.
研究领域:
材料科学
·
纳米科技
·
传感器技术
·
环境监测
·
半导体物理
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2022
·
IF 3.656
Jiaying Zhang,Zhendong Yao,Wenzhen Zou,Qiang Shen,Meiqiang Fan,Tingli Ma
Transition trimetallic sulfide NiCoMn–S attracts great attention due to its high specific capacity for hybrid supercapacitors , as well as Ti 3 C 2 is considered essentially as a potential new electrode material with iconic two-dimensional layered structure and excellent conductivity. Herein, NiCoMn–S nanoparticles are composited with two-dimensional layered Ti 3 C 2 via simple one-step hydrothermal method , which is first applied as positive electrode in hybrid supercapacitors (HSCs). A large number of NiCoMn–S nanoparticles distribute on the surface of Ti 3 C 2 and even insert into the Ti 3 C 2 layers, providing abundant electrochemical active sites for redox reaction and enhancing the mechanical stability for composites. Moreover, the NiCoMn–S/Ti 3 C 2 composites show lower charge-transfer resistance than pure NiCoMn–S, illustrating that the two-dimensional layered structure of Ti 3 C 2 improve the conductivity and supply additional electronic channels for ion transportation. The NiCoMn–S/Ti 3 C 2 -3.4% delivers a specific capacity of 347.1 C g −1 at a specific density of 1 A g −1 , which is 28% higher than that of pure NiCoMn–S (270.2 C g −1 at 1 A g −1 ). Finally, a hybrid supercapacitor (HSC) is assembled by using NiCoMn–S/Ti 3 C 2 -3.4% as positive electrode and RGO as negative electrode, realizing a specific capacity of 164.3 C g −1 at 1 A g −1 and high specific energy of 16.2 Wh kg −1 at a specific power of 15 kW kg −1 .
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
Advanced Electronic Materials
·
2019
·Vol. 5
·期 10
·1900552
·
IF 6.312
Li Yang,Hao Wu,Wenfeng Zhang,Xun Lou,Zijian Xie,Xu Yu,Yuan Liu,Haixin Chang
Room temperature ferromagnetic semiconductors remain one of the most puzzling issues to be solved in tens of years. Nowadays, 2D ferromagnetic transition metal dichalcogenides (TMDCs) nanosheets attract continuous interest due to their exceptional electronic structure and properties. Here, it is identified that semiconducting 2H-phase MoTe 2 few/mono-layer mixed nanosheets present a room temperature ferromagnetic property with Curie temperature above 400 K, although the MoTe 2 bulk counterpart shows diamagnetic properties. The origin of such observed room temperature ferromagnetism is attributed to the combination of their structural defects including Te vacancies, disorders, and amorphous imperfections and edge-states caused by reduced dimensionality. Moreover, a distinct enhancement of ferromagnetic properties at room temperature is revealed by a non-magnetic Ta doping strategy. Such structural defects and edge-states modulated ferromagnetism offers a feasible strategy to search for more robust room temperature ferromagnetic TMDCs nanosheets, which is essential to explore novel electronic and spintronic devices where both carrier charge and spin freedom can be controlled.
研究领域:
凝聚态物理
·
材料科学
·
纳米科技
·
自旋电子学
·
半导体物理
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 46
·23773-23779
·
IF 9.931
Zhiyuan Wang,Ruqin Zhang,Min Zhao,Zhongqiang Wang,Bingwei Wei,Xuefeng Zhang,Shuai Feng,Hailiang Cao,Peizhi Liu,Yuying Hao,Hua Wang,Bingshe Xu,Stephen J. Pennycook,Junjie Guo
High-performance organic photovoltaics (OPVs) are of great scientific and technological importance due to their potential large-scale industrial applications. Introducing semiconductor quantum dots has been proven to be an effective way to improve the power conversion efficiency (PCE) of OPVs. In this paper, we report a novel approach to fabricate atomically thin antimonene quantum sheets (AMQSs) possessing a uniform size (≈2.2 nm) via imidazolium ionic liquid-assisted exfoliation. In this method, the yield of AMQSs (1.1 mg mL−1) has been increased by nearly two orders of magnitude compared with that of previously reported methods. Furthermore, upon adding AMQSs into the light absorber in OPVs, the optimal device with 1.0 mg mL−1 AMQSs shows the highest PCE of 9.75%, resulting in over 25% enhancement in PCE compared to that of the reference device. It also leads to a noticeable enhancement in the short-circuit current density (Jsc) of 16.7% and the fill factor (FF) of 8.4%. The increased PCE is mainly due to the two-dimensional electronic structure of AMQSs that can enhance the light absorption, assist exciton dissociation and reduce charge recombination of OPVs. This work provides a new avenue toward mass production of two-dimensional quantum sheets and points to a new strategy for highly efficient OPVs.
研究领域:
材料科学
·
纳米科技
·
光伏技术
·
半导体物理
·
能源材料
✓ 已验证
DOI
高影响因子
Physica Status Solidi-Rapid Research Letters
·
2023
·Vol. 18
·期 7
·2300102
·
IF 2.8
Wenlong Chu,Ruifeng Xin,Luwei Zou,Xiulian Fan,Xilong Zhou,Cheng Li,Yu Zhou
2D nonlayered materials have attracted more and more attention due to their novel properties and special surface structures. However, due to isotropic chemical bonds within the crystal, the synthesis of ultrathin 2D nonlayered materials is an urgent challenge. Herein, α -Fe 2 O 3 2D nanosheets as thin as ≈8.2 nm on different substrates using self-designed ultralow concentration precursors combined with Gibbs free energy and Se catalysts design are successfully synthesized. The thickness-dependent growth mechanism is systematically studied, demonstrating the thermodynamic and kinetic controlling factors. The as-grown α -Fe 2 O 3 nanosheets are demonstrated with single-crystal structures without any other elements doping. The α -Fe 2 O 3 nanosheets photodetectors show the reasonable response performance with the positive photoconductive mechanism. This improved chemical vapor deposition method provides a promising idea for the synthesis of ultrathin 2D nonlayered materials.
研究领域:
材料科学
·
纳米科技
·
表面科学
·
凝聚态物理
·
光电子学
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2022
·
IF 6.137
Mingyang Gao,Wen Zhang,Zhuo Cao,Manzhang Xu,Wu Zhao,Zhiyong Zhang
At the 2022 Beijing Winter Olympics, the concept of sustainable development impressed the world. This study is supported by the concept of ecological protection and conservation. The easily available plastic bottled Coca-Cola® was innovatively proposed as a low-cost solvent to greenly exfoliate bulk tungsten disulfide (WS 2 ). First, an overview of two-dimensional (2D) WS 2 was given, summarizing the related reports on its structures and synthesis. Taking into account the yield of 2D flakes, the optimal fabrication environment was figured out. The related characterizations of the cola-synthetic WS 2 were studied. This work opens up a new strategy for the inexpensive and green exfoliation of 2D crystals with a high yield.
研究领域:
材料科学
·
纳米科技
·
绿色化学
·
无机合成
·
二维材料
✓ 已验证
DOI
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2023
·
IF 5
Shizhou Tan,Pengcheng Jian,Maocheng Shan,Yongming Zhao,Zhihua Zheng,Yiming Yang,Yuhui Zeng,Dan Xu,Zhenyu Chen,Changqing Chen,Feng Wu,Jiangnan Dai
In this work, we demonstrated tunable structured AlGaN-based nanoporous (NP) distributed Bragg reflectors (DBRs) with high-reflectivity through one-step vertical-lateral electrochemical etching (ECE). The aperture of nanopores in the doping layer and the size and density of V-pits on the surface of NP-DBRs can be tuned by controlling the etching bias. Furthermore, by further tuning the thickness of alternating layers, we achieved high reflectivity of NP-DBRs at multiple center wavelengths within the wavelength range from 280 to 800 nm. To explore its potential applications, MoS 2 with a photoluminescence (PL) emission in the red light region was grown for the first time on the NP-DBRs. Due to the light localized effect of surface V-pits and the high reflectivity of the bottom DBRs , the PL intensity of MoS 2 was significantly enhanced by a factor of 37.3 compared to the region without NP-DBRs. The PL enhancement of MoS 2 on porous AlGaN and different periodic NP-DBRs further validated the PL enhancement mechanism. The corresponding theoretical simulations also revealed that the PL enhancement should be attributed to the combined effect of enhanced light absorption and NP-DBRs induced emission interference. The fabricated AlGaN-based NP-DBRs provide a new approach for improving the quantum efficiency of two-dimensional layered materials, which holds significant importance for advancing the development of miniaturized and integrated 2D/3D heterogeneous structure systems in the field of optoelectronics.
研究领域:
光电子学
·
半导体材料
·
纳米光子学
·
二维材料
·
固体物理
·
表面科学
·
集成光子器件
✓ 已验证
DOI
高影响因子
Advanced Electronic Materials
·
2023
·Vol. 9
·期 11
·2300392
·
IF 6.2
Guangliang Li,Lingxian Kong,Qi Su,Xianhua Tan,Xuning Zhang,Zhiyong Liu,Tielin Shi,Guanglan Liao,Bo Sun
Few-layer black phosphorus (FL-BP) shows great potential in infrared polarization-sensitive photodetection due to its narrow bandgap and strong in-plane anisotropy. However, FL-BP is easy to be oxidized and degraded, which severely restricts its applications. Herein, a simple and scalable in situ interfacial passivation method based on pentacene film is reported to enhance the ambient stability of FL-BP as well as achieve n-type doping for improved polarization-sensitive photoimaging. High crystal quality FL-BP flakes with intrinsic anisotropy are prepared by electrochemical exfoliation. The morphology and Raman spectra of FL-BP/pentacene exhibit excellent stability 28 days after passivation. In addition, the hole mobility is significantly enhanced and dark current is substantially suppressed due to the interfacial passivation and n-type doping effect. The FL-BP/Pentacene based photodetector shows a broadband response from visible to near-infrared with good stability. The photoresponsivity under 915 nm illumination is calculated as 2.2 mA W −1 with an anisotropy ratio of 1.29. Furthermore, the polarization imaging under the irradiation at zigzag and armchair directions directly reveals the strong infrared polarization-sensitive imaging capability of FL-BP/pentacene. This work also opens up new avenues to enhance the photoresponse and stability of various optoelectronics based on similarly unstable 2D materials.
研究领域:
纳米材料学
·
光电子学
·
二维材料
·
半导体物理
·
红外成像
·
表面科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）