Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Sainan Hu,Zhixiang Fu,Yongchao Chen,Chuyu Zhou,Zhengdong Fei
A novel polyvinylidene fluoride/bis(trimethoxysilylpropyl)amine (PVDF/BTMSPA) asymmetric composite membrane was fabricated through a one-step vapor-induced phase separation (VIPS) process. The hydrophilic BTMSPA monomers preferentially migrated to the membrane surface during VIPS, where they underwent hydrolysis and condensation to form a dense skin layer, while the hydrophobic PVDF matrix solidified into a porous support layer. By varying the VIPS duration, the skin layer structure could be tuned from porous to dense. At a VIPS time of 0.5 h, a spontaneously formed dense-skinned PVDF/BTMSPA composite membrane was achieved. The membrane demonstrated preferential adsorption of n-butanol over water, exhibiting optimal separation performance for a 4 wt% n-butanol/water mixture at 70 °C, with a flux of 1980 g/m 2 ·h and a separation factor of 63.65. This work not only provides a facile and efficient VIPS-based strategy for fabricating asymmetric composite membranes but also highlights the potential of PVDF/BTMSPA membranes for n-butanol/water separation applications.
研究领域:
材料科学
·
分离技术
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Xue Fu,Shuyan Xu,Mingyu Ma
In recent years, with the increasing attention to food safety and environmental protection, the development of biodegradable food packaging materials with comprehensive performance has become a hotspot. This article presents the preparation of a polyvinyl alcohol carboxymethyl cellulose composite film with barrier property. This study utilized formaldehyde nanocellulose as a crosslinking agent to chemically modify composite membranes. Further promote its application in food preservation. The mechanical properties and barrier properties of formaldehyde cellulose (DCNC) polyvinyl alcohol (PVA) carboxymethyl cellulose (CMC) composite films were studied. Apply the prepared DCNC/PVA/CMC composite film to strawberry preservation experiments. The results showed that cross linked modified composite film can more effectively reduce indicators such as weight loss rate, titratable acid content and ascorbic acid content of strawberries, thus effectively prolonging strawberry shelf life by 4 days. This indicates that modified composite films have certain potential application value in the field of food packaging.
研究领域:
食品科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Membranes
·
2022
·Vol. 12
·期 2
·239
·
IF 4.562
Xiaolong Sun,Longfei Yin,Huayue Zhu,Junhao Zhu,Jiahuan Hu,Xi Luo,He Huang,Yongqian Fu
In this study, chitosan and sugarcane cellulose were used as film-forming materials, while the inorganic agent zinc oxide (ZnO) and natural compound phenyllactic acid (PA) were used as the main bacteriostatic components to fabricate biodegradable antimicrobial composite membranes. The water absorption and antimicrobial properties were investigated by adjusting the concentration of PA. The scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results demonstrated that the components of the composite membrane were successfully integrated. The addition of ZnO improved the mechanical and antimicrobial properties of the composite membrane, while the addition of PA with high crystallinity significantly reduced the water absorption and swelling. Moreover, the addition of 0.5% PA greatly improved the water absorption of the composite membrane. The results of antimicrobial experiments showed that PA improved the antimicrobial activity of the composite membrane againstStaphylococcus aureus,Escherichia coli,Aspergillus nigerandPenicillium rubens. Among them, 0.3% PA had the best antimicrobial effect againstS. aureus,E. coliandA. niger, while 0.7% PA had the best antimicrobial effect againstP. rubens.Keywords:composite membrane;phenyllactic acid;antimicrobial activity
研究领域:
材料科学
·
生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Processes
·
2020
·Vol. 8
·期 8
·897
·
IF 2.753
Yangfan Xu,Chongxing Huang,Xiujie Dang,Muhammad Rafiullah Khan,Haohe Huang,Yuan Zhao,Shuangfei Wang
The mesoporous silica wall materials can achieve controlled load and sustained-release of active agents. An antimicrobial nanoscale silica microcapsule containing cinnamaldehyde (CA) was prepared by the sol-gel method and applied in poly (butyleneadipate-co-terephthalate) (PBAT) film. The surface morphology, physical and chemical properties, and antibacterial properties of microcapsules and films were studied. The effects of different temperatures and humidities on the release behavior of microcapsules were also evaluated. Results showed that CA was successfully encapsulated in silica microcapsule which had a diameter of 450–700 nm. The antibacterial CA agent had a long-lasting release time under lower temperature and relative humidity (RH) environment. At low temperature (4 °C), the microcapsules released CA 32.35% in the first 18 h, and then slowly released to 56.08% in 216 h; however, the microcapsules released more than 70% in 18 h at 40 °C. At low humidity (50%RH), the release rates of microcapsules at the 18th h and 9th d were 43.04% and 78.01%, respectively, while it reached to equilibrium state at 72 h under 90% RH. The sustained release process of CA in SiO2-CA microcapsules follows a first-order kinetic model. Physicochemical properties of PBAT films loaded with different amounts of microcapsules were also characterized. Results showed that the tensile strength and water vapor transmission rate (WVTR) of the composite film containing 2.5% microcapsules were increased by 26.98% and 14.61%, respectively, compared to the raw film, while the light transmittance was slightly reduced. The crystallinity of the film was improved and can be kept stable up to 384.1 °C. Furthermore, microcapsules and composite film both exhibited distinctive antibacterial effect onEscherichia coliandListeria monocytogenes. Therefore, SiO2-CA microcapsules and composite films could be a promising material for the active packaging.Keywords:cinnamaldehyde;PBAT;antibacterial materials;composite film
研究领域:
材料科学
·
生物技术
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Peiqing Zhang,Sihang Li,Fan Xiao,Yongfang Xiao,Yi Zhang,Zhongguo Shan,Zhenyu Li,Haihua Wang
Membrane distillation (MD) represents a promising advance in wastewater purification, contributing to the mitigation of water scarcity. Hydrophobic poly(vinylidene fluoride) (PVDF) microporous membrane is susceptible to wetting by low surface tension substances, leading to fouling. To address this, PVDF membrane was superhydrophobically modified using modified ZIF-8 to obtain two composite membranes, AZ/PVDF and Z@C/PVDF. AZ/PVDF and Z@C/PVDF composite membranes were prepared by coating more dispersible APTES-ZIF-8 and ZIF-8@MWCNT, respectively, onto the surface of PVDF membrane. The hydrophobicity of the composite membranes was regulated by silane types, fluorination methods, and fluorination time, resulting in reduced surface roughness and increased surface energy. The contact angles of AZ/PVDF and Z@C/PVDF were 154.2 ± 3.4° and 156.8 ± 4.2°, respectively. Both AZ/PVDF and Z@C/PVDF membranes demonstrated outstanding mechanical, thermal, and chemical stability. AZ/PVDF and Z@C/PVDF membranes outperformed PVDF membrane, extending operation times by 2 h and 3 h, respectively, without obvious NaCl crystals. Furthermore, Z@C/PVDF membrane exhibited superior resistance to wetting by SDS than AZ/PVDF and PVDF membranes, treating pickle brine via the direct contact MD (DCMD) process with a recovery rate of 30.2 % within 10 h. Overall, this research offers a promising approach to fabricating superhydrophobic composite membranes for high-salt brine treatment via DCMD.
研究领域:
化学工程
·
材料科学
·
环境工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2020
·
IF 5.774
Hongbin Li,Hengji Liu,Wenying Shi,Haixia Zhang,Rong Zhou,Xiaohong Qin
Mixed matrix membranes (MMMs) combine the advantages of different materials and hopefully break through the limitation of high mass transfer resistance and low permeability in membrane distillation (MD) process. In this study, hydrophobic zeolitic imidazolate framework-71 (ZIF-71)/polyvinylidene fluoride (PVDF) hollow fiber composite membrane was prepared by the dilute solution coating method. ZIF-71 was incorporated into the PVDF dilute solution and a macroporous hydrophobic ZIF-71/PVDF coating layer was formed on the outer surface of PVDF hollow fiber support membrane through the nonsolvent induced phase separation (NIPS) process. PVDF hollow fiber support membrane was fabricated by the dry-jet wet spinning process. Membrane surface morphologies were observed through Field emission scanning electron microscope (FESEM). The effects of zeolitic imidazolate frameworks (ZIFs) content in PVDF coating layer on membrane surface hydrophobicity and desalination performance were investigated through Dynamic water contact angle (WCA) measurements and the vacuum membrane distillation (VMD) experiment, respectively. The VMD experiment was carried out at feed temperature 50 °C and permeation side vacuum 31.3 kPa using 3.5 wt% NaCl aqueous solution as the feed solution. Compared with the uncoated PVDF hollow fiber membrane, both the surface hydrophobicity and the water permeability of the ZIFs-incorporated PVDF hollow fiber composite membranes are improved. The surface WCA and permeation water flux of ZIFs-PVDF composite membrane increase from 94.5 to 136.5° and 13.5 to 27.1 kg . m −2. h −1 meanwhile the NaCl rejection could maintain at 99.99%. No obvious pore wetting phenomenon was observed for ZIFs-PVDF hollow fiber composite membrane during the continuous VMD experiment for 60 h. The dilute solution coating is a promising method to prepare high-performance hollow fiber composite membrane for the desalination in MD process.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
高影响因子
Membranes
·
2018
·Vol. 8
·期 4
·89
·
IF 0
Qin Liu,Xing Wu,Kaisong Zhang
To improve the filtration performance and properties of organic solvent nanofiltration (OSN) membranes, we firstly introduce nanoporous silica (SiO2) particles into the polyamide (PA) active layer of polysulfone (PSf) membrane via an interfacial polymerization process. Results from the study revealed that introduction of SiO2influenced the properties of PSf/PA-SiO2composite membranes by changing the surface roughness and hydrophilicity. Moreover, results also indicated that nanoporous SiO2modified membranes showed an improved performance of alcohols solvent permeance. The PSf/PA-SiO2composite membrane modified by 0.025 wt % of SiO2reached a permeance of 3.29 L m−2h−1bar−1for methanol and 0.42 L m−2h−1bar−1for ethanol, which were 20.0% and 13.5% higher than the control PSf membrane (permeance of 2.74 L m−2h−1bar−1for methanol and 0.37 L m−2h−1bar−1for ethanol). Conclusively, we demonstrated that the increase of membrane hydrophilicity and roughness were major factors contributing to the improved alcohols solvent permeance of the membranes.Keywords:silica;polysulfone;composite membrane;polyamide
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
CHEMISTRY & BIODIVERSITY
·
2024
·
IF 2.3
Xiaonan Zhang,Xiaocheng Zhuang,Manxin Chen,Jingrong Wang,Zhuoyu Liu,Daxiong Qiu,Jinna Wang,Yan Huang,Weina Li,Zhiwei Liu
Tannic acid and Fe 3+ were used in this study to create a polyphenol–metal network-based composite film for the preservation of Melaleuca bracteata essential oils. The inhibition rate of ABTS and DPPH free radicals reached more than 90 % at an essential oil concentration of 20 mg/mL. Additive quantities of 2.0 % essential oil nano-emulsion, 0.8 % tannic acid/Fe 3+ solution, 0.4 % microcrystalline cellulose, and 1 % chitosan were used to maximize the characteristics of the composite films. When combined with FTIR analysis, X-ray diffraction and scanning electron microscopy revealed that the composite film containing the essential oil emulsion had a more reticulated structure. The essential oil composite layer on mangoes increased the fruit shelf time to 12 days, decreased weight loss by 10.81±4.70 %, increased the amount of soluble solids by 2.03±0.31 %, and increased the amount of vitamin C by 2.18±0.09 %. A trustworthy technical method for the storage and transportation of agricultural goods is offered by this study. Graphical
研究领域:
食品科学
·
植物化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Weiyi Cai,Wenwa Weng,Nigel Graham,Xun Liu,Wenzheng Yu,Kening Sun,Ting Liu
MXene (Ti 3 C 2 Tx) can be utilized to modify water-related membranes to provide favorable properties, including pronounced hydrophilicity and chemical stability, and higher flux compared with GO membranes. In order to improve the properties of composite membrane properties, new methods of modifying MXene membranes have been receiving increasing attention. Nowadays, the performance of MXene membranes is mainly limited by methods of modification and stability. In this study, a high-performance composite membrane utilizing MXene (Ti 3 C 2 T x ) was fabricated through a mild and rapid pre-oxidation method. The composite membrane had a high water permeability of ∼690 L m −2 h −1 MPa −1 , a dye rejection of ∼99.9 % and an adsorption rate of only 1 %. Compared with the unoxidized MXene membranes, the composite membranes showed improved the permeation inhibition efficiencies of 42.39 % and 37.51 % for NaCl and MgCl 2 , respectively. The rapid oxidation by Fe(III) formed a composite nano-layer of anatase TiO 2 and magnetite Fe 3 O 4 supported by carbon sheets which protected the internal Ti 3 C 2 T x from further oxidation. The characteristic morphology of a two-dimensional, layer by layer material, was maintained. In addition, the composite membrane demonstrated long-term stability in terms of both structure/appearance and flux in water. Therefore, this work presents new thoughts on the structural tuning and performance optimization of MXene (Ti 3 C 2 T x ) membranes.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2016
·Vol. 46
·期 2
·554-563
·
IF 4.177
Erbin Shi,Huiming Lin,Qian Wang,Feng Zhang,Shaoxuan Shi,Tingting Zhang,Xin Li,Hao Niu,Fengyu Qu
A novel ZIF-Ni composite film has been successfully prepared by a facile method involving the in situ deposition of ZIF-8 on a nickel porous film which is fabricated by selectively etching copper from a dense Ni/Cu alloy film. The nanostructures of the resulting ZIF-Ni composite films are carefully examined by a combination of scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR) spectroscopy, energy dispersive X-ray (EDX), and nitrogen adsorption–desorption. Cyclic voltammetric and amperometric studies show the enhanced electrocatalytic properties of the ZIF-Ni composite film electrodes toward hydrazine oxidation relative to the synergistic effect of ZIF-8 and porous Ni films. The application potential of the composite films as amperometric detectors is explored for the determination of hydrazine. A high sensitivity of 805.5 μA mM−1 for hydrazine detection with a low detection limit of 0.021 μM (S/N = 3) and a wide linear range from 2.5 μM to 28 mM are revealed for this new type of composite film as the detecting electrode. Moreover, the composite films exhibit excellent selectivity and remarkable stability for the oxidation of hydrazine. This can offer new opportunities for the fast and selective detection of hydrazine and provide a promising platform for sensor designs for hydrazine detection.
研究领域:
材料科学
·
分析化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Yingbo Li,Jing Ma,Hongjun Lin,Cheng Chen,Saleam Raza,Qianqian Zeng,Xinchun Lu,Liguo Shen
The development of composite membranes utilizing transition metal carbides and nitrides, exemplified by Ti 3 C 2 T x (MXene), has proven efficacious in the treatment of oily wastewater. However, challenges arise from the prolonged and convoluted transport paths within MXene interlayer nanochannels, significantly impeding mass transfer and diminishing membrane permeability. This investigation incorporated porous covalent organic frameworks (COFs) as intercalating agents into two-dimensional (2D) MXene-based membranes to expand the interlayer nanochannels. The resulting MXene@COF-TpBD functional layer polyethersulfone (PES) composite membrane exhibited a distinctive dual superoleophobic surface, concurrently manifesting underwater superoleophobicity and underoil superhydrophobicity (underwater oil contact angle >150°, underoil water contact angle >150°). The membranes exhibited excellent water flux (up to 4092.7 L m −2 h −1 ·bar −1 ), efficient oil-water emulsion separation (up to 1908.4 L m −2 h −1 ·bar −1 , rejection rates >99.78 %), noteworthy fouling resistance and structural stability, outperforming most of existing similar membranes. Furthermore, supported by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the incorporation of COF-TpBD improved the antifouling characteristics of the composite membrane. This work presents innovative insights into the improvement of 2D MXene membranes and the use of COF-TpBD for the specific remediation of oily wastewater.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Huanhuan Tan,Yang Tang,Zewei Hou,Peipei Yang,Chuntai Liu,Zhipeng Xie,Songwei Li
Extraction uranium (VI) (U(VI)) from wastewater and seawater is highly important for environmental protection and life safety, but it remains a great challenge. In this work, the growth of the zeolitic imidazolate framework-8 (ZIF-8) nanoparticles on the tannic acid (TA)-3-aminopropyltriethoxysilane (APTES) modified PVDF (TAP) membrane was designed to obtain an excellent U(VI) adsorbent. The zeolite imidazolate framework composite membrane (TAPP-ZIF-60) was prepared through polyethyleneimine (PEI) bridging strategy and temperature regulation strategy in solvothermal method. The coordination bond between PEI and ZIF-8 and the covalent bond between PEI and TAP are essential in forming stable composite membrane. TAPP-ZIF with different properties was synthesized through a temperature regulation process and the TAPP-ZIF prepared at 60 °C has the uniform morphology and good performance. The adsorption capacity of TAPP-ZIF-60 is 153.68 mg/g (C 0 = 95.01 mg/L and pH = 8.0) and water permeability is 5459 L m −2 h −1 bar −1 . After ten adsorption–desorption cycles, it is proved that TAPP-ZIF-60 has good repeatability and stability. In addition, the TAPP-ZIF-60 composites membrane has a good inhibitory effect on Staphylococcus aureus and Escherichia coli . X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) analysis reveal that the coordination between TAPP-ZIF-60 and uranyl ions is the primary factor contributing to the high adsorption capacity.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）