CERAMICS INTERNATIONAL
·
2019
·
IF 3.45
Zhiwei Wang,Hongfeng Yin,Yun Tang,Qin Hou,Chen He,Hudie Yuan
Herein, we constructed an ordered nanoporous embedding nanoparticles composite by anodic oxidation of Ti 3 SiC 2 in fluorine containing organic electrolyte. Compared to anodized Ti which resulted in TiO 2 nanotubes , the anodized Ti 3 SiC 2 (ATSC) led to the formation of nanostructured TiO 2 /C/SiO 2 composite. The morphologies of oxides in the composite also varied with different anodization parameters. The ATSC could be directly used as an electrode without further processes, which possessed a superior structure and composition with a visible-light photocurrent density of 7.56 μA cm −2 , initial reversible area capacity of 6.18 F cm −2 , which were respectively 1.32 and 6.87 times higher than those of the anodized Ti (AT), respectively. The ATSC synthesized by such a feasible fabricating strategy shows favorable photoelectrochemical properties and remarkable stability, and may broaden the bifunctional material prospects of anodized MAX phases.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2018
·
IF 5.667
Yachao Zhang,Yan Gao,Xueli Zhang,Huiming Wang,Tian Xia,Congcong Bian,Shuang Liang,Xiaozhi Tang,Xia Wang
The amplification of the electrochemical signal is crucial to improving the sensing performance of an immunosensor. In this study, a signal amplification strategy based on the co-catalysis of horseradish peroxidase (HRP) and nanoporous gold (NPG) was used to fabricate an electrochemical immunosensor for the determination of Hepatitis B e antigen (HBeAg). For the resulting immunosensor, HRP catalyzed catechol and thus served as a signal label of secondary antibody. NPG with unique properties was selected as a carrier for capture antibody immobilization. Further, NPG had an efficient electrocatalytic activity towards catechol (the substrate of HRP), which thus significantly enhanced the electrochemical signal produced by the HRP-labeled secondary antibody. Based on the co-catalysis of HRP and NPG, the immunosensor exhibited a good linear relationship between peak current density and HBeAg concentration in a wide HBeAg detection range from 1 pg mL −1 to 1 ng mL −1 with a high sensitivity of 23.51 μA mL ng −1 cm −2 as well as a low detection limit of 0.064 pg mL −1 (S/N = 3). Additionally, the immunosensor presented a strong anti-interference capability against human serum, human serum/dopamine, human serum/tryptophan, human serum/NO 2 − , human serum/D-glucose, and human serum/IgG. For the detection of HBeAg in human serum, the concentrations detected by the immunosensor were in good agreement with the standard concentrations that added in the human serum samples. These unique properties potentially make the proposed immunosensor a good choice for HBeAg detection.
研究领域:
生物医学工程
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2009
·
IF 1.51
Rongguan Lv,Jun Yang,Pengfei Gao,Yanna NuLi,Jiulin Wang
A mixture of nanoporous and nanofibrous silicon (NPNF-Si) is prepared by the mechanochemical reduction of SiCl 4 using Li 13 Si 4 as reducing agent in the presence of Super P carbon (SP) and the following thermal treatment and washing process. Morphologies and structures of the as-obtained composites are investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). After carbon coating via pyrolysis of polyvinyl chloride (PVC), the resulting NPNF-Si/SP/C composite is evaluated for the use as anode material in lithium-ion battery. It exhibits the first discharge capacity of 746.6 mAh g −1 at current density of 0.2 mA mg −1 and capacity retention of 91.1% after 30 cycles. The good electrochemical performance arises from the particular Si nano-structure, which can alleviate the volume effect during lithium insertion and extraction.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
锂离子电池
✓ 已验证
DOI
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2023
·
IF 5
Shizhou Tan,Pengcheng Jian,Maocheng Shan,Yongming Zhao,Zhihua Zheng,Yiming Yang,Yuhui Zeng,Dan Xu,Zhenyu Chen,Changqing Chen,Feng Wu,Jiangnan Dai
In this work, we demonstrated tunable structured AlGaN-based nanoporous (NP) distributed Bragg reflectors (DBRs) with high-reflectivity through one-step vertical-lateral electrochemical etching (ECE). The aperture of nanopores in the doping layer and the size and density of V-pits on the surface of NP-DBRs can be tuned by controlling the etching bias. Furthermore, by further tuning the thickness of alternating layers, we achieved high reflectivity of NP-DBRs at multiple center wavelengths within the wavelength range from 280 to 800 nm. To explore its potential applications, MoS 2 with a photoluminescence (PL) emission in the red light region was grown for the first time on the NP-DBRs. Due to the light localized effect of surface V-pits and the high reflectivity of the bottom DBRs , the PL intensity of MoS 2 was significantly enhanced by a factor of 37.3 compared to the region without NP-DBRs. The PL enhancement of MoS 2 on porous AlGaN and different periodic NP-DBRs further validated the PL enhancement mechanism. The corresponding theoretical simulations also revealed that the PL enhancement should be attributed to the combined effect of enhanced light absorption and NP-DBRs induced emission interference. The fabricated AlGaN-based NP-DBRs provide a new approach for improving the quantum efficiency of two-dimensional layered materials, which holds significant importance for advancing the development of miniaturized and integrated 2D/3D heterogeneous structure systems in the field of optoelectronics.
研究领域:
光电子学
·
半导体材料
·
纳米光子学
·
二维材料
·
固体物理
·
表面科学
·
集成光子器件
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）