JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
·
2023
·
IF 5
Siyuan Yu,Jinfeng Xing
Erythromycin (EM) was encapsulated into poly(methyl methacrylate) (PMMA) and poly(methyl methacrylate- co - N -vinylcaprolactam) (P(MMA-NVCL)) microspheres in situ by oil-in-water emulsion photopolymerization under green LED irradiation. The physicochemical properties of PMMA-EM and P(MMA-NVCL)-EM microspheres were characterized by SEM, FTIR, TG-DSC and DLS. P(MMA-NVCL)-EM microspheres showed temperature sensitivity, and the EM loading content of PMMA-EM and P(MMA-NVCL)-EM microspheres reached 9.7% and 15.6%, respectively. In vitro release of EM from microspheres presented good controlled release behavior in 12 h. Further release kinetic and thermodynamic investigation revealed that the release process was mainly dominated by EM concentration, accompanied by microspheres relaxation and rupture of hydrogen bonds .
研究领域:
材料科学
·
药学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
COLLOID AND POLYMER SCIENCE
·
2020
·Vol. 298
·期 10
·1285-1291
·
IF 1.536
Xie Chuanbao,Leng Kangwei,Sheng Jie,Wang Xuemei,Li Qianmin,Song Liang,Liu Lei,Sun Hejing,Huang Xiaowen,Wang Zhongwei,Yu Qing
Poly(methyl methacrylate) (PMMA) microspheres were synthesized through visible light–induced photopolymerization of methyl methacrylate (MMA). 2,4,6-Trimethylbenzoyldipenylphosphine oxide (TPO), polyvinylpyrrolidone (PVP), and light-emitting diodes (LEDs) were used as the photoinitiator, stabilizer, and light source, respectively. No other additive was involved. The effect of LEDs, TPO, and PVP was discussed. Results showed that PMMA microspheres with the size of 0.5–0.8 μm could be obtained when LED@385 nm was the light source, and the content of TPO and PVP was 2 wt% and 30 wt% of MMA. Moreover, the possible formation pathway of PMMA microspheres was proposed based on the investigation of reaction time and addition method of PVP.
Graphical abstract
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Polymers
·
2021
·Vol. 13
·期 22
·3860
·
IF 4.329
Do Quang Tham,Mai Duc Huynh,Nguyen Thi Dieu Linh,Do Thi Cam Van,Do Van Cong,Nguyen Thi Kim Dung,Nguyen Thi Thu Trang,Pham Van Lam,Thai Hoang,Tran Dai Lam
In this study, vinyltrimethoxysilane-treated hydroxyapatite (vHAP) and PMMA-grafted HAP (gHAP) were successfully prepared from original HAP (oHAP). Three kinds of HAP (oHAP, vHAP and g HAP) were used as additives for the preparation of three groups of HAP-modified PMMA bone cements (oHAP-BC, vHAP-BC and gHAP-BC). The setting, bending and compression properties of the bone cements were conducted according to ISO 5833:2002. The obtained results showed that the maximum temperature while curing the HAP-modified bone cements (HAP-BCs) decreased from 64.9 to 60.8 °C and the setting time increased from 8.1 to 14.0 min, respectively, with increasing HAP loading from 0 to 15 wt.%. The vHAP-BC and gHAP-BC groups exhibited higher mechanical properties than the required values in ISO 5833. Electron microscopy images showed that the vHAP and gHAP nanoparticles were dispersed better in the polymerized PMMA matrix than the oHAP nanoparticles. FTIR analysis indicated the polar interaction between the PO4groups of the HAP nanoparticles and the ester groups of the polymerized PMMA matrix. Thermal gravimetric analysis indicated that mixtures of ZrO2/HAPs were not able to significantly improve the thermal stability of the HAP-BCs. DSC diagrams showed that the incorporation of gHAP to PMMA bone cement with loadings lower than 10 wt.% can increase Tgby about 2.4 °C.Keywords:HAP-modified bone cement;vinyltrimethoxysilane-treated HAP;PMMA-grafted HAP;bending;ISO 5833
研究领域:
生物材料学
·
骨科医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2018
·
IF 4.946
Nataliya A. Gavrilenko,Tatyana N. Volgina,Evgeniy V. Pugachev,Mikhail A. Gavrilenko
Polymethylmethacrylate matrix has been developed as an analytical device for visual and spectrophotometric determination of malachite green. Based on the studied effects of different pH levels, temperature, contact time and diverse ions, optimum analysis conditions have been established. For malachite green, the calibration graph was linear in the range of 0.5–30 mg·L −1 in the samples with the detection limit of 1 mg·kg −1 . The proposed simple method makes it possible to determine malachite green visually in the concentration range 8–30 mg·L −1 using a colour scale. The method has been implemented for determination of malachite green in various sea fish samples.
研究领域:
分析化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials
·
2017
·Vol. 10
·期 11
·1239
·
IF 2.654
Bing Yu,Liang He,Yifan Wang,Hailin Cong
Magnetic porous microspheres are widely used in modern wastewater treatment technology due to their simple and quick dye adsorption and separation functions. In this article, we prepared porous polymethylmethacrylate (PMMA) microspheres by the seed-swelling method, followed by in situ formation of iron oxide (Fe3O4) nanoparticles within the pore. Then, we used diazo-resin (DR) to encapsulate the porous magnetic microspheres and achieve PMMA@Fe3O4@DR magnetic material. We studied the different properties of magnetic microspheres by different dye adsorption experiments before and after the encapsulation and demonstrated that the PMMA@Fe3O4@DR microspheres can be successfully used as a reusable absorbent for fast and easy removal of anionic and aromatic dyes from wastewater and can maintain excellent magnetic and adsorption properties in harsh environments.Keywords:poly (methylmethacrylate) (PMMA);magnetic;diazo-resin (DR);adsorption;dye
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2023
·Vol. 15
·期 11
·2501
·
IF 5
Panpan Zhang,Qiongqiong Xu,Wenyu Mao,Jiaxing Lv,Haodong Tang,Huadong Tang
A novel synthesis of ultrahigh molecular weight poly(methyl methacrylate) (PMMA) using organosulfur compounds combined with a catalytical amount of transition metal carboxylates as an initiator has been developed. The combination of 1-octanethiol with palladium trifluoroacetate (Pd(CF3COO)2) was found to be a very efficient initiator for the polymerization of methyl methacrylate (MMA). An ultrahigh molecular weight PMMA with a number-average molecular weight of 1.68 × 106Da and a weight-average molecular weight of 5.38 × 106Da has been synthesized at the optimal formulation of [MMA]:[Pd(CF3COO)2]:[1-octanethiol] = 94,300:8:23 at 70 °C. A kinetic study showed that the reaction orders with respect to Pd(CF3COO)2, 1-octanethiol, and MMA are 0.64, 1.26, and 1.46, respectively. A variety of techniques such as proton nuclear magnetic resonance spectroscopy (1H NMR), electrospray ionization mass spectroscopy (ESI-MS), size exclusion chromatography (SEC), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and electron paramagnetic resonance spectroscopy (EPR) were employed to characterize the produced PMMA and palladium nanoparticles (Pd NPs). The results revealed that Pd(CF3COO)2was firstly reduced by the excess of 1-octanethiol to form Pd NPs at the early stage of the polymerization, followed by the adsorption of 1-octanethiol on the surface of nanoparticles and subsequent generation of corresponding thiyl radicals to initiate the polymerization of MMA.Keywords:ultrahigh molecular weight;PMMA;polymerization;kinetics;mechanism
研究领域:
高分子化学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2016
·Vol. 34
·期 4
·483-490
·
IF 1.811
Zhang Li-na,Song Yi-hu,Zheng Qiang
Poly(methyl methacrylate) (PMMA) based ionomers with different lanthanum (La(III)) contents (PMMA-XLa) synthesized by free radical solution polymerization were applied to poly(vinyl chloride) (PVC) resins as a kind of multifunctional aids, and their performances were evaluated by measuring the static stability time, initial discoloration, transparency, fusion behavior and tensile strength of the modified PVC. The ionomers with proper lanthanum (La(III)) contents show a better thermal stability efficiency in comparison with traditional stabilizer lanthanum stearate. Meantime, they can accelerate PVC plasticization more efficiently than PMMA. The rigid PVC products stabilized with the ionomers present good transparency and enhanced tensile strength.
研究领域:
材料科学
·
高分子化学
✓ 已验证
DOI
高影响因子
REACTIVE & FUNCTIONAL POLYMERS
·
2020
·
IF 3.333
Wang Xie,Biwu Wang,Yuan Liu,Qi Wang,Zhongqiang Yang
It is challenge for improving the flame retardancy of poly(methyl methacrylate) (PMMA), and meanwhile keeping its inherent high transparency. In this paper, a phosphorus containing monomer synthesized by our group is introduced into PMMA via radical copolymerization to prepare a flame retardant and transparent modified PMMA. The structure and properties of the obtained copolymer is characterized. With 15% mol of the phosphorus containing monomer involved, the copolymer exhibits a comparable transparency with PMMA, and its limit oxygen index (LOI) reaches 27.5% and passes UL-94 V-0. The flame retardance mechanism of the copolymer is further analyzed by thermogravimetric analysis (TGA), cone calorimetry , scanning electron microscope (SEM) and Fourier transform infrared light spectrograph (FT-IR).
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
Applied Sciences-Basel
·
2019
·Vol. 9
·期 3
·603
·
IF 2.217
Wenzhong Ma,Yuchen Zhao,Zhiwei Zhu,Lingxiang Guo,Zheng Cao,Yanping Xia,Haicun Yang,Fanghong Gong,Jing Zhong
An efficient synthesis route was developed for the preparation of multiwalled carbon nanotube (MWCNT) nanohybrids using azide-terminated poly(methyl methacrylate) (PMMA) via a combination of reversible addition fragmentation chain transfer (RAFT) and the click reaction. A novel azido-functionalized chain transfer agent (DMP-N3) was prepared and subsequently employed to mediate the RAFT polymerizations of methyl methacrylate (MMA). The RAFT polymerizations exhibited first-order kinetics and a linear molecular weight dependence with the conversion. The kinetic results show that the grafting percentage of PMMA on the MWCNTs surface grows along with the increase of the reaction time. Even at 50 °C, the grafting rate of azide-terminated PMMA is comparatively fast in the course of the click reaction, with the alkyne groups adhered to MWCNTs in less than 24 h. The successful functionalization of PMMA onto MWCNT was proved by FTIR, while TGA was employed to calculate the grafting degree of PMMA chains (the highest GP = 21.9%). Compared with the pristine MWCNTs, a thicker diameter of the MWCNTs-g-PMMA was observed by TEM, which confirmed the grafted PMMA chain to the surface of nanotubes. Therefore, the MWCNTs-g-PMMA could be dispersed and stably suspended in water.Keywords:multi-wall carbon nanotube (MWCNT);azide-alkyne click chemistry;RAFT polymerization;PMMA
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
POLYMER BULLETIN
·
2019
·Vol. 77
·期 6
·3223-3235
·
IF 1.858
Jiang Jingzhe,Wei Anqi,Li Jianping,Ji Yue,Qiang Huijun,Jiang Yan,Zhang Hongwen,Liu Hongbo
In this paper, hydroxyl terminated polysiloxane was first prepared by ring-opening polymerization of octamethylcyclotetrasiloxane (D 4 ), which was then modified with acryloyl chloride to obtain acryloyloxy polysiloxane. A light-scattering material was synthesized by copolymerization of acryloyloxy polysiloxane and methyl methacrylate (MMA). The results showed that the transmittance of the material was 88% and the haze was 93% when the ratio of MMA to light-scattering agent was 100:1, the amount of initiator was 0.3%, and the post-polymerization temperature was 50 °C. The TGA data indicated that the material had excellent heat resistance. Therefore, it has a wide range of applications in the field of light-emitting diodes.
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2018
·Vol. 10
·期 11
·1217
·
IF 2.935
Jinku Xu,Dongmei Li
Transparent nanocomposite films containing quantum dots are popular because of their extensive applications. However, nanoparticles tend to aggregate, resulting in phase separation of the nanoparticles in the polymer matrix. Herein, we present a bulk thermo-curing copolymerization method to fabricate poly(methyl methacrylate)-based nanocomposite films with ultra-high-loading ZnS quantum dots (ZnS/PMMA), utilizing polymerizable group-capped ZnS and monomer of methyl methacrylate (MMA). We found that the nanocomposite film is highly transparent, although the transmittance decreases with the ZnS content, especially at the wavelength between 300 nm and 400 nm. The results from X-ray diffraction (XRD), transmission electron microscopy (TEM), and dynamic mechanical thermal analysis (DMTA) show that the ZnS quantum dots maintain their original crystal structure, and are uniformly dispersed in the nanocomposite films, even with a very high ZnS content (41 wt %, determined by thermogravimetric analysis). The thermogravimetric analysis shows that the nanocomposite films possess a better thermal stability than that of pure PMMA film. The photoluminescence measurements show that ZnS/PMMA nanocomposite films have good optical properties. The fluorescence intensity increases with the increment of free ZnS content to 30 wt %, and then decreases due to self-reabsorption at a higher ZnS content. The transparent ZnS/PMMA nanocomposite films have a potential application as photoluminescence material.Keywords:nanocomposites;Quantum dots;poly(methyl methacrylate);photoluminescence
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Weilong Wu,Qin Ouyang,Liu He,Qing Huang
Polymethyl methacrylate (PMMA) is a widely used optical polymer due to its excellent transparency and durability. However, the sole methyl group shows pure PMMA low refractive index and low UV absorbility, and poor thermal stability. In this work, two comonomers phenyl methacrylate (PhMA) and adamantyl methacrylate (AdMA) were used for copolymerization with methyl methacrylate (MMA), and three copolymers P(AdMA-co-MMA), P(PhMA-co-MMA) and P(AdMA-co-PhMA-co-MMA) were prepared. They were characterised by FTIR , 1 H NMR, UV-Vis, ellipsometer , DSC , TG , and TG-MS, and the effects of phenyl and adamantyl substituents on the optical and thermal properties of PMMA were studied. It was found that phenyl played an important role in increasing the absorption and refraction of PMMA in the deep UV region (190–260 nm), while the glass transition temperature and thermal stability of PMMA were more affected by adamantyl than by phenyl. Introduction of phenyl and adamantyl substituents provided a method to tune the optical and thermal properties of PMMA as photoresist or antireflective coating for deep UV lithography.
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）