RSC Advances
·
2016
·Vol. 6
·期 16
·13418-13425
·
IF 3.289
Fubin Luo,Kun Wu,Mangeng Lu
The influence of polybenzoxazine modified ammonium polyphosphate (BMAPP) on the thermal behavior and flame retardancy of a rigid polyurethane foam (PU) are investigated via thermogravimetric analysis (TG), TG coupled with infrared spectroscopy (TG-FTIR), UL-94 vertical burning testing and limit oxygen index (LOI). The TG testing results indicate that BMAPP can enhance the thermal stability of PU, both under air and nitrogen conditions. The initial degradation temperature of the BMAPP/PU composites is 264 °C in air, which is 22 °C and 30 °C higher than that of ammonium polyphosphate (APP)/PU composites and neat PU, respectively. The reason might be attributed to the better dispersion and compatibility of BMAPP particles in PU compared with APP, which can prevent the PU chain from degrading at low temperatures. The LOI value results demonstrate that BMAPP has higher flame retardancy in PU than APP. Residue analysis implies that polybenzoxazine is partially converted into Si–O as char residue during combustion.
研究领域:
高分子材料科学
·
阻燃材料
·
热功能材料
·
复合材料学
·
材料化学
✓ 已验证
DOI
高影响因子
POLYMER DEGRADATION AND STABILITY
·
2014
·
IF 2.633
Guang-Rui Xu,Miao-Jun Xu,Bin Li
The cyclotriphosphazene-based epoxy resin hexa-[4-(glycidyloxycarbonyl) phenoxy]cyclotriphosphazene defined as CTP-EP was successfully synthesized from hexachlorocyclotriphosphazene, p -hydroxybenzaldehyde and epichlorohydrin. Its chemical structure was characterized by Fourier transform infrared (FTIR) spectroscopy, 1 H NMR, 13 C NMR and 31 P NMR spectroscopy . The prepared compound was cured with diamino diphenyl methane (DDM), diamino diphenyl sulfone (DDS) and m -phenylenediamine (mPDA), respectively. The flame retardant properties, thermal degradation behavior and flame retardant mechanism of the cured CTP-EP were investigated. The LOI values of all cured CTP-EP samples increased from 19.9% for cured diglycidyl ether of bisphenol-A (DGEBA) to above 30% and successfully passed UL-94 V-0 rating, which demonstrated that the prepared CTP-EP thermoset exhibited excellent flame retardancy. The dynamic mechanical thermal analysis (DMA) test demonstrated that the glass transition temperature ( Tg ) enhanced from 155 °C for the cured DGEBA to 167 °C for CTP-EP thermoset . The results of thermogravimetric analysis/infrared spectrometry (TG-IR) tests suggested that the phosphazene group and high aromatic content in CTP-EP thermoset stimulated the dehydration of the matrix at earlier degradation process and the formation of char layer, which retarded the release of pyrolysis gas and enhanced the thermal stability of the cured CTP-EP at high temperature. The cone calorimeter tests (cone) test revealed that heat release rate (HRR), total heat release (THR), smoke production rate (SPR) and total heat production (TSP) of the cured CTP-EP decreased significantly compared with the cured DGEBA. The scanning electron microscopy (SEM) results showed that the phosphazene groups in CTP-EP obviously stimulated the formation of the intumescent, compact and stable char layer, which enhanced the flame retardancy of the matrix during combustion. Consequently, the underlying materials were protected from further degradation and combustion during a fire and result in the efficient flame retardancy of CTP-EP thermoset.
研究领域:
高分子化学
·
材料科学
·
热分析
·
阻燃材料
·
聚合物化学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2022
·Vol. 139
·期 25
·e52390
·
IF 3.057
Xinyi Dong,Zhenggui Wu,Yang Wang,Ting Li,Hao Yuan,Xuhui Zhang,Piming Ma,Mingqing Chen,Jing Huang,Weifu Dong
Despite polylactide (PLA) representing one of the most promising biodegradable materials, its applications lag far behind owing to the disadvantages of inherent brittleness and flammability, which is challengeable to simultaneously overcome. In this work, a phosphorus-containing core-shell starch nanoparticle (FR-CSS) was synthesized via soap-free emulsion polymerization for concurrent improvement of toughness and flame retardancy of PLA. The results revealed that with the incorporation of 10 wt% FR-CSS, the elongation at break of PLA/10FR-CSS was prominently improved to 308% while the tensile strength was about 40.0 MPa. Particularly, the toughness of PLA/FR-CSS was as high as 108.2 MJ/m 3 , which was 48 times higher than that of neat PLA. Besides, the PLA/10FR-CSS exhibited improved flame retardancy with a UL-94 V-2 rating and a LOI value of 24.5%. These results established an integrated design strategy of incorporating phosphorus-containing core-shell nanoparticles to prepare PLA composites combined excellent toughness with enhanced flame retardancy, therefore broadening the application gallery of PLAs.
研究领域:
高分子材料
·
生物材料
·
阻燃材料
·
纳米复合材料
·
可降解聚合物
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2020
·Vol. 31
·期 11
·2480-2491
·
IF 2.578
Po Hu,Xinyu Zheng,Jiwei Zhu,Baolin Wu
Chicken feather keratin (CK), a biomaterial that contains a large amount of nitrogen is extracted from chicken feathers and has significant potential for use as a flame retardant. In this study, CK and 9,10-dihydro-9-oxa-10-phosphenanthrene-10-oxide (DOPO) were added in different amounts to an epoxy resin (EP), and their flame retardancy and smoke suppression effects were studied. The results showed that CK exhibits a good flame-retardancy effect and better smoke suppression characteristics than those of DOPO when added to EP. Furthermore, it greatly reduces the CO yield in smoke. While the EP samples with DOPO showed better flame-retardancy properties than those of the samples with CK, they also produced more smoke, which had a higher CO content. Furthermore, when CK and DOPO were added to EP together, the flame-retardancy characteristics of the samples varied with the CK/DOPO ratio. Then the pyrolysis of all samples was divided into two stages based on thermokinetics analysis and the activation energies of these samples in the two stages were investigated. Finally, the flame-retardancy mechanism was discussed. When samples burn, the PO· free radicals derived from DOPO combine with H· and OH· to induce a quenching effect. In addition, the phosphate resulting from the decomposition of DOPO promotes the formation of the char layer. At the same time, the noncombustible gases generated during the pyrolysis of CK cause the char layer to expand and remove some of the heat. Thus, CK and DOPO synergistically improved the flame retardancy of EP.
研究领域:
高分子材料科学
·
阻燃化学
·
热分析
·
环境友好材料
·
生物基添加剂
✓ 已验证
DOI
高影响因子
Sustainable Materials and Technologies
·
2024
·
IF 8.6
Wei Tan,Chunlong Zuo,Yin Tian,Lu Bai,Lina Jiang,Jieyun Zhao,Xiaoyu Liu,Yuanlin Ren,Xiaohui Liu
The white pollution caused by non-degradable plastics poses a serious threat to human society and the environment, thus developing biodegradable material is urgent. In this work, a novel phosphonitrile hybrid metal-polyphenol network was constructed and used for the preparation of flame retardant , UV resistant and antibacterial multifunctional polyvinyl alcohol composite (PVA@HCPD-Ag). The limiting oxygen index (LOI) value of PVA@HCPD-Ag was improved to 33.5%, while the peak heat release rate (PHRR) and total heat release (THR) decreased by 35.62% and 47.76%. Besides, the ultraviolet protection factor (UPF) value of PVA@HCPD-Ag was significantly improved from 4.63 of the original PVA to 482.79, while the tensile strength was increased by 10.23%. Furthermore, the inhibition efficacy of PVA@HCPD-Ag for E. coli and S. aureus was up to 98.12% and 99.99%. This work explored the synergistic flame retardant effect of in-situ reduced Ag 0 and phosphonitrile crosslinked polyphenol network and proposed an advanced strategy for developing high value-added functionalized PVA materials.
研究领域:
高分子材料科学
·
功能材料
·
纳米复合材料
·
生物医用材料
·
环境友好材料
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Pingfan Xu,Yaofa Luo,Peikun Zhang
Polyurethane (PU) composites integrated with outstanding fire retardancy, smoke suppression as well as ameliorated mechanical property is attractive, but remains a challenge. Here, we demonstrate the interfacial architecting of organic–inorganic hybrid (ACAPP) by reacting renewable chitooligosaccharide (COS) with ammonium polyphosphate (APP) and ammonium octamolybdate (AOM) via a one-pot, facile and eco-friendly approach. The ACAPP with multiple hydroxyl groups shows good compatibility and strong interfacial adhesion force with PU matrix due to the abundant covalent cross-linking points and hydrogen bonds networks. The incorporation of 15 wt% ACAPP enables the resultant PU composite to achieve a V-0 rating, a limiting oxygen index of 26.1%, 31.1% and 44.8% reduction in total heat release and total smoke production, respectively, far outdistancing conventional APP. The suppressed fire hazards mainly benefits from the synergy catalytic carbonization effect of ACAPP in condensed phase. Moreover, ACAPP reinforces the tensile strength of PU whilst retaining the decent ultimate elongation. This work may offer a referable exemplification for constructing green flame-retardant to balance high fire safety and mechanical properties.
研究领域:
高分子材料科学
·
阻燃化学
·
复合材料工程
·
绿色化学
·
材料界面科学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2019
·Vol. 136
·期 45
·48187
·
IF 2.188
Yan Zhang,Shili He,Jianing Wu,Junjie Ma,Shengdong Shao,Lingjie He,Xiaonan Li,Zhengping Fang,Hongwei Cao,Zhichao Xi
The waste silicon rubber composite insulator (WSiRC) was applied along with ammonium polyphosphate (APP) and pentaerythritol (PER) to improve the flame retardancy of polypropylene (PP) in this study. Considering the compatibility among PP, WSiRC, and flame-retardant additives, WSiRC was treated by acid and N 2 plasma to obtain the plasma-treated WSiRC (PLSiR), which decreases the amount of the inorganic additive and grafts amino groups onto the surface of the silicon rubber. The infrared spectrocopy (IR), scanning electron microscopy (SEM), and thermal gravimetric analysis (TGA) confirm that NH 2 groups have been grafted onto the surface of PLSiR. The TGA data also show that PLSiR had the char improving ability and promote the crosslink of APP, which results in its promotion for the flame retartancy of PP proved by the data of limiting oxygen index (LOI), UL94 rating and cone tests. It is also showed that PLSiR is superior than the WSiRC treated only by acid (ASiR) due to the differences in the structure and polarity. Moreover, the improvement of PLSiR on the flame retardancy of PP is dependent on its amounts. It is indicated that the 1 wt % loading of PLSiR in PP with APP and PER has the highest LOI value of 30.9 and reached UL94 rating V-0. The peak heat release rate (pHRR) and total heat release (THR) values are also decreased by 68.7 and 15%, respectively. SEM and Raman results show the condensed mechanism is ascribed to the PP/APP-PER/PLSiR system because the quality of char affect the flame retardancy of PP. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 48187.
研究领域:
高分子材料科学
·
阻燃化学
·
材料表面改性
·
环境功能材料
·
废弃资源再利用
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2018
·Vol. 29
·期 12
·2982-2991
·
IF 2.137
Zhiyong Zhang,Miaojun Xu,Bin Li
The polymethacrylimide/silicate (PMI/silicate) composites were successfully prepared from the monomers of acrylonitrile (AN) and methacrylic acid (MAA) via the monomer in situ intercalation polymerization and free foaming. The formation of imide groups was monitored by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results of FTIR and XPS indicated that the imide groups were gradually formed and cyano groups were dwindling but still existed during foaming and thermal treatment. The thermogravimetric analysis results revealed that the thermal stability of the PMI/silicate composites was improved, the rate of thermal degradation was reduced, and the residue was increased because of the addition of silicates. The results of dynamic mechanical analysis revealed that the rigidity and the glass transition temperature of the composites were improved. The limit oxygen index (LOI) and cone calorimeter (CONE) test showed that the fire-retardant properties were improved because of the barrier effect of silicates. The cell morphologies of the PMI/silicate composites were characterized by scanning electron microscopy (SEM), and the results showed that the silicate particles were distributed on the cell walls, but the cells slightly cracked. The mechanical properties were measured by tensile, flexural, and compressive strength. The mechanical strength, especially flexural strength, was significantly improved. The flexural strength of PMI/MMT, PMI/kaolin, and PMI/talc containing 8 wt% silicates was improved to 172%, 240%, and 233%.
研究领域:
高分子材料
·
复合材料科学
·
材料化学
·
防火材料
·
多孔材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）