International Journal of Applied Ceramic Technology
·
2024
·
IF 1.8
Biao Yang,Bo Yin,Han Chen,Yifeng Zheng
LiCoO 2 has become the most widely used cathode material in lithium-ion batteries because of its high capacity and excellent stability. The high-temperature solid-state method is commonly used for the preparation of LiCoO 2 . However, this method will produce highly penetrating Li 2 O, which causes spall or fracture of the insulating refractory materials in the kiln. In this study, the corrosion resistance of bubble alumina, mullite, and calcium hexaaluminate (CA 6 ) insulating refractories to LiCoO 2 has been thoroughly investigated. Combining the laboratory-scale interfacial reaction experiments with post-experimental life cycle analysis of industrial insulating refractories, the interaction between the insulating refractory materials and LiCoO 2 after calcination at 900°C for 5 h and the corrosion behavior of LiCoO 2 on different insulating refractory materials following heat treatment at 900°C for 5 h every time and repeated seven times are investigated. The corrosion mechanisms are concluded by analyzing the physicochemical composition and macro- and micromorphology of the three insulating refractory materials before and after corrosion. The results can provide a basis for the use of insulating refractories in the development of lithium batteries.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
OPTICAL MATERIALS
·
2023
·
IF 3.9
Jiajie Pan,Youjie Hua,Zhanhao Fan,Hongping Ma
Far-red light plays a crucial role in the field of plant lighting. Herein, a novel far-red phosphor BaAl 2 Si 3 O 4 N 4 : Sm 2+ , which can be effectively excited by blue light, was successfully prepared by high-temperature solid-state reaction. The PL spectrum show a broadband emission range from 600 nm to 950 nm (FWHM = 120 nm), which is well matched with the absorption of P FR in plant. In BaAl 2 Si 3 O 4 N 4 : Sm 2+ , the Ba 2+ are coordinated with three N and six O atoms. When the rare earth ion of Sm 2+ was doped into the host lattice , Ba 2+ was partially replaced by Sm 2+ . The low temperature PL spectra at 8–80 K were studied in detail. It was found that the PL spectra at low temperature were composed of some sharp lines and broadband superposition, which corresponding to the 5 D 0 - 7 F J (J = 0–4) energy level transition of Sm 2+ . It is shown that the broadband emission of the phosphor was caused by the broadening of the 4f 5 5 d 1 energy level due to the strong crystal field effect. The thermal stability analysis showed that the luminescence intensity of BaAl 2 Si 3 O 4 N 4 : Sm 2+ at 150 °C still maintains 62.7 % of that at room temperature , showing excellent thermal stability. All results indicate that BaAl 2 Si 3 O 4 N 4 : Sm 2+ phosphor has important potential applications in the field of plant lighting.
研究领域:
材料科学
·
光电子学
·
农业光学
·
无机化学
·
发光材料
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2020
·Vol. 126
·期 9
·711
·
IF 1.81
Liu Dong,Jin Yahong,Xiong Guangting,Lv Yang,Wu Haoyi,Ju Guifang,Chen Li,Hu Zhengfa,Hu Yihua
A series of broadband blue-green phosphors Rb 0.5+ y Na 1.5− y (Li 3 SiO 4 ) 2 : x Eu 2+ (0 ≤ y ≤ 0.4, 0.01 ≤ x ≤ 0.08) were synthesized by the high-temperature solid-state reaction. The powder X-ray diffraction was employed to explore the crystal structural evolution from RbNa 3 (Li 3 SiO 4 ) 4 to RbNa(Li 3 SiO 4 ) 2 with the increasing of Rb + . The spectra show the optimized composition was determined as y = 0.4. The luminescence, lifetime decay curves and thermal steadily spectra of Rb 0.9 Na 1.1 (Li 3 SiO 4 ) 2 : x Eu 2+ phosphors were investigated in detail. The phosphor of Rb 0.9 Na 1.1 (Li 3 SiO 4 ) 2 :Eu 2+ shows suitable visible spectra (450–550 nm, cover the blue and green regions), excellent thermal quenching (104%@150 °C of the initial integrated intensity at room temperature under 396 nm excitation) and broad excitation spectrum (320–450 nm). Finally, a commercial near-UV LED devices (395 nm) were fabricated with the Rb 0.9 Na 1.1 (Li 3 SiO 4 ) 2 :Eu 2+ phosphor as blue-green and commercial red phosphor CaAlSiN 3 :Eu 2+ with a warm color temperature of 3104 K and a color rendering index of 91.8. This result indicated that Rb 0.9 Na 1.1 (Li 3 SiO 4 ) 2 :Eu 2+ may be a promising blue-green phosphor for indoor lighting.
研究领域:
材料科学
·
发光材料
·
固体化学
·
照明技术
·
无机化学
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2024
·
IF 3.8
Qilin Yu,Jingxiang Liu,Pengjun Zhang,Shuwei Hao,Chongqiang Zhu,Chunhui Yang
A novel red phosphor BaY 4 Si 3 O 13 :Eu 3+ (BYSO:Eu 3+ ) was designed and prepared through a high-temperature solid-phase method in this work. It was found that the addition of Li 2 CO 3 in the synthesis process could significantly decrease the sintering temperature and increase the intensity and purity of red emission, as more lower symmetry sites were occupied by Eu 3+ . The optimum preparation conditions of BYSO:Eu 3+ were obtained as sintering at 1350 °C for 3h with the doping of 18% Eu 3+ and 5% Li 2 CO 3 . The CIE chromaticity coordinate was (0.636,0.362) and color purity reached 91.56% at room temperature, and 53.93% of the initial PL intensity could be retained when the temperature rose up to 453 K. The results showed that BYSO:Eu 3+ had greatly potential application in white LED deriving from the great red emission.
研究领域:
材料科学
·
光电技术
·
发光材料
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2025
·
IF 4.2
Chen-Yang Qi,Dan Zhao,Rui-Juan Zhang,Qing-Xia Yao
Mn 4+ has garnered significant global interest due to its application in red light emission, particularly within the realm of plant growth lighting. However, there are relatively few studies focusing on the incorporation of Mn 4+ into titanate materials. In this research, we synthesized a series of Ba₆Y₂Ti 4-x O₁₇ (BYT: x Mn⁴⁺) phosphors with varying concentrations of Mn 4+ using a high-temperature solid-state synthesis method. Initially, we confirmed the structural integrity and phase purity of the samples through X-ray diffraction (XRD) analysis and refinement techniques. The experimental results indicate that under near-ultraviolet (UV) excitation, these phosphors emit far-red light at approximately 700 nm. Furthermore, their emission spectra align closely with the spectral requirements of chlorophyll and photoreceptive pigments (P r and P fr ), which are essential for optimal plant growth. This characteristic makes them promising candidates for plant cultivation applications. Consequently, we posit that BYT:0.015Mn⁴⁺ represents a novel titanate-based far-red emitting material with considerable potential for use in LED lighting systems designed for plant growth particularly in enhancing photosynthetic efficiency and promoting overall plant development.
✓ 已验证
产品关联
DOI
高影响因子
ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES
·
2022
·Vol. 78
·期 1
·83-88
·
IF 1.712
Arif Ullah,Jinghao Zhuang,Xiaozhan Yang,Wenlin Feng
Red emitting Li 2 CaSnO 4 : x Eu 3+ phosphors were successfully synthesized by the high-temperature solid-state method. The crystal structure, composite and luminescence properties (e.g. the excitation and emission spectra, fluorescent lifetimes, and CIE chromaticity coordinates) of the samples were investigated by X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), energy dispersive spectrometer (EDS) and spectral analysis technique. The emission spectra consist of the characteristic peak resultant to Eu 3+ under the excitation of 395 nm and the dominant emission peak is at 621 nm ( 7 F 0 → 5 L 6 ). The optimal red emission was obtained through 4% Eu 3+ doping. These new red Li 2 CaSnO 4 : Eu 3+ phosphors have the potential application for white LEDs.
研究领域:
材料科学
·
光电技术
·
固体化学
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·
IF 2.7
Feiyan Xie,Junqiang Gu,Dekang Xu,Qiancheng Xiong,Jinyu Yang,Xiangjian Ou,Dawei Wen
Research into red phosphors with a high color rendering index is particularly compelling, given the absence of a red component in the spectrum of commercial pc-WLEDs, which combine blue LED chips with yellow-emitting YAG:Ce3+ phosphors. Herein, we reported a novel Eu3+ activated Ca3Zn3Te2O12 red-emitting phosphor, synthesized using a conventional high-temperature solid-phase method. The phase and crystal structures were analyzed by powder X-ray diffraction and Rietveld refinement. The optimal excitation peak of the Ca3Zn3Te2O12:Eu3+ phosphor was located at 395 nm, matching those of conventional commercial near-ultraviolet chips. In addition, the Ca3Zn3Te2O12:9%Eu3+ phosphor exhibited good thermal stability, with an activation energy of 0.267 eV, and the CIE color coordinates hardly changed with temperature. Ultimatel, a high-quality white LED device was fabricated by combining Ca3Zn3Te2O12:9%Eu3+ red phosphor, a commercial BaMgAl10O17:Eu2+ blue phosphor, and(Ba,Sr)2SiO4:Eu2+ green phosphor with a 395 nm near-UV chip. Despite a substantial increase in the input current from 20 to 320 mA, the white-LED maintained a stable color rendering index of around 80, highlighting its consistent performance. These results indicated that Eu3+ activated Ca3Zn3Te2O12 phosphors are promising red emission candidates for white LEDs pumped by near ultraviolet chips.
研究领域:
材料科学
·
光电技术
·
光子学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2023
·
IF 4.9
Youfa Tai,Ruirui Cui,Jun Zhang,Chunkai Wang,Tingyu Zhao,Beiqiao Zhang,Chaoyong Deng
Novel orange-red Sr 2 GdSbO 6 : x Eu 3+ ( x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6) phosphors were successfully prepared by the traditional high-temperature solid-state method. The results of Rietveld refinement, energy dispersive spectroscopy (EDS) spectrum and elemental mapping demonstrate that Eu 3+ successfully replaces the Gd 3+ sites and distributes uniformly in the particles of phosphors. The luminescence properties of Sr 2 GdSbO 6 :Eu 3+ phosphors were investigated in detail. The emission spectra of the strongest emission peak is the 5 D 0 → 7 F 1 (593 nm) transition, which can emit orange-red light under 393 nm excitation. When the doping concentration of Eu 3+ ions is x = 0.2, the luminescence intensity of the phosphors reaches the highest. The detailed mechanism of concentration quenching is attributed to dipole-dipole interaction. The thermal stability values of Sr 2 GdSbO 6 :0.2Eu 3+ phosphors are 87%, 82% and 114% under 393, 467 and 527 nm excitations, respectively. The causes of the abnormal thermal quenching under 527 nm excitation were analyzed. Based on the abnormal thermal quenching under 527 nm excitation, the optical thermometry properties of Sr 2 GdSbO 6 :0.2Eu 3+ phosphors were investigated by fluorescence intensity ratio (FIR) technique, and appreciable relative sensitivity was obtained. The results suggest that Sr 2 GdSbO 6 :0.2Eu 3+ phosphors can be potentially applied to w-LEDs and optical thermometers.
研究领域:
材料科学
·
光学
·
磷光材料
·
发光材料
·
光学传感
✓ 已验证
产品关联
DOI
高影响因子
ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES
·
2023
·Vol. 78
·期 11
·1061-1067
·
IF 1.8
Arif Ullah,Jinghao Zhuang,Zheng Liu,Xiaozhan Yang,Wenlin Feng
In this work, the phosphors of Eu 3+ ions doped Ba 2.9 Sr 0.1 WO 6 were successfully synthesized by the high-temperature solid-state method. The luminescence properties, including the emission and excitation spectra, fluorescent lifetimes, and CIE chromaticity coordinates were characterized. The crystal structure and composite of the samples were investigated by XRD (X-ray diffraction), and HRTEM (high-resolution transmission electron microscope). The emission spectra consist of the characteristic peak of Eu 3+ excitation at 393 nm; the leading emission peak at 618 nm can be ascribed to the transition of 7 F 0 → 5 L 6 . The optimal red emission is achieved by 2 % Eu 3+ doping. This red Ba 2.9 Sr 0.1 WO 6 : Eu 3+ has good luminescent properties and may have potential application in white LEDs.
研究领域:
材料科学
·
光电材料
·
荧光粉材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）