JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Dong Li,Renyi Li,Yizhou Zhao,Kaixuan Wang,Ke Fan,Wei Guo,Qi Chen,Yujing Li
Perovskite CsPbBr 3 quantum dot shows great potential in artificial photosynthesis, attributed to its outstanding optoelectronic properties. Nevertheless, its photocatalytic activity is hindered by insufficient catalytic active sites and severe charge recombination. In this work, a CsPbBr 3 @Ag-C 3 N 4 ternary heterojunction photocatalyst is designed and synthesized for high-efficiency CO 2 reduction. The CsPbBr 3 quantum dots and Ag nanoparticles are chemically anchored on the surface of g-C 3 N 4 sheets, forming an electron transfer tunnel from CsPbBr 3 quantum dots to Ag nanoparticles via g-C 3 N 4 sheets. The resulting CsPbBr 3 @Ag-C 3 N 4 ternary photocatalyst, with spatial separation of photogenerated carriers, achieves a remarkable conversion rate of 19.49 μmol·g −1 ·h −1 with almost 100 % CO selectivity, a 3.13-fold enhancement in photocatalytic activity as compared to CsPbBr 3 quantum dots. Density functional theory calculations reveal the rapid CO 2 adsorption/activation and the decreased free energy (0.66 eV) of *COOH formation at the interface of Ag nanoparticles and g-C 3 N 4 in contrast to the g-C 3 N 4 , leading to the excellent photocatalytic activity, while the thermodynamically favored CO desorption contributes to the high CO selectivity. This work presents an innovative strategy of constructing perovskite-based photocatalyst by modulating catalyst structure and offers profound insights for efficient CO 2 conversion.
研究领域:
材料科学
·
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS RESEARCH
·
2014
·Vol. 29
·期 18
·2170-2178
·
IF 1.815
Xiaomeng Lü,Jiayu Shen,Ziwei Wu,Jiaxi Wang,Jimin Xie
Plasmonic Ag nanoparticles (AgNPs) with narrow distribution were successfully loaded on graphitic carbon nitride (g-C3N4) sheet by thermal polymerization of melamine precursor and a simple wet-chemical pathway in the presence of polyvinylpyrrolidone (PVP). N,N-dimethylformamide (DMF) was used as an efficient reducing agent as well as a solvent and its presence facilitated homogeneous distribution of AgNPs under mild reaction condition and easy control of its particle growth under different precursor amounts. Ag/g-C3N4 composites of different Ag content were prepared, and the phase, chemical structure, morphologies, electronic and optical properties of Ag/g-C3N4 heterostructures were well characterized, respectively. The photocatalytic activity of Ag/g-C3N4 composites was evaluated by the decolorization of methyl orange (MO), and they exhibited superior photocatalytic activity to bulk g-C3N4 under visible-light irradiation. Influence of Ag content to photocatalytic activity was also discussed and possible mechanism was explored based on the analysis of photoluminescence spectra (PL) and photodecoloration activity.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2023
·Vol. 53
·期 2
·899-906
·
IF 2.1
Wang Caiyun,Zhou Yanhong,Liu Zhimin
A composite of WO 3 and WS 2 has a wider wavelength range of light adsorption and light emission than WS 2 . A noble metal nanostructure can be utilized to adjust the photoluminescence (PL) of luminescent materials. In this study, WO 3 -WS 2 flakes were synthesized. A straightforward bath method has been employed to synthesize Ag nanoparticles (NPs). The average size of Ag NPs is approximately 60 nm. The Fourier transform infrared (FT-IR) peak of WO 3 -WS 2 flake at 495 cm −1 is from an alkane S–S bond stretching vibration. The PL intensity of WO 3 -WS 2 was attenuated subsequent to its integration with Ag NPs. The PL quantum yield of the WO 3 -WS 2 /Ag composite can reach 0.11%. This occurrence can be explained by the pronounced resonance absorption and diminished light extraction induced by the Ag NPs. This decreased light emission of the Ag NPs incorporated with WO 3 -WS 2 may be employed in some situations needing extinction, such as photography and projection. Graphical Abstract
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Long Cheng,Chengping Li,Xingqiao Wu,Ziyi Wang,Liuting Zhang,Wei Kong,Liang Wang,Petr Senin,Arkadii Proskurin,Ting Bian
As a promising and sustainable way for freshwater production, interfacial solar vapor generation technology often encounters harsh conditions such as fluctuating illumination, high salinity, bacterial growth, and acid/alkali corrosion, which can reduce its conversion efficiency and lifespan. Here, to address these challenges, an environmentally adaptive hierarchical structure incorporating plasmonic Ag nanoparticles, MoS 2 nanoflowers, and polydopamine (PDA) (MoS 2 @PDA/Ag) within a hybrid hydrogel matrix was designed as the functional solar evaporator. By systematically adjusting the volume ratio of cellulose nanofibers (CNF) and polyvinyl alcohol (PVA) skeletons, high evaporation efficiencies can be achieved in hypersaline conditions. Further, the cooperation of multi-photothermal materials endows the evaporator with a broad light absorption spectrum, superior photothermal conversion efficiency, and strong antimicrobial capabilities. The evaporator demonstrates a high evaporation rate of 2.79 kg m -2 h −1 under 1 sun irradiation and maintains sustainable evaporation for 8 h without salt deposition in 20 % NaCl solution. After being immersed in an acidic and alkaline seawater environment for 30 days, the evaporator shows no change in appearance, with only a slight decrease in performance. This work presents a promising platform for the development of solar evaporators with practical applications in various environmental conditions.
研究领域:
材料科学
·
环境科学
·
能源科学
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Ruikai Wang,Zhichao Hao,Haiyan Li,Chenghui Xia,Bohua Dong,Lixin Cao
Optimizing the interfacial action of photoanode for photoelectrochemical (PEC) behavior to facilitate charge transport is essential for enhancing solar-to-fuel efficiency. Herein, a typical CuWO 4 /NiFe-LDH/Ag photoanode was reported and an alternative pathway for charge transfer in the PEC process through surface states mechanism was elucidated. In particular, the layer double hydroxides (NiFe-LDH) acted as charge-transfer agents to facilitate the transfer of photogenerated carriers; while the surface plasmon resonance (SPR) effect of the Ag provided hot electrons, which increased the carrier concentration and promoted the charge separation. The influence of presence of surface states on the PEC process was systematically illustrated. Experimental results indicated that the optimized CuWO 4 /NiFe-LDH/Ag photoanode displayed a photocurrent that was more than an order of magnitude larger than that of the pure CuWO 4 (increasing from 0.30 mA cm −2 to 1.45 mA cm −2 at 1.23 V vs. RHE), accompanied by favorable electrochemical impedance and stability (maintaining 92.4%). Importantly, increasing the available filled surface states could be beneficial in enhancing the PEC behavior. This work provided additional insights into photoanode charge transport in PEC processes.
研究领域:
材料科学
·
能源科学
·
光催化
✓ 已验证
产品关联
DOI
高影响因子
Journal of Nano Research
·
2024
·
IF 0.8
Yong Li,Ya Liang Chen,Yan Qun Shao
Photocatalysis properties enhanced by metal and organic polymer has been received more interest because of their ability to directly or indirectly degrade pollutants. The effect of PDA (polydopamine) and Ag nanoparticles on the different phases of ZnO to degrade organic dyes under visible and UV-vis light was investigated. ZnO@PDA, ZnO-Ag, and ZnO-Ag@PDA nanoparticles were synthesized. It’s shown that Ag particles with sizes of less than 20 nm were deposited evenly on the ZnO. There were a few changes in the structure of ZnO@PDA or ZnO-Ag @PDA. When the ZnO was coated by PDA, the photocatalytic activity could be enhanced. The photocatalytic activity under UV-vis and visible light of the ZnO@PDA were effectively improved. The degradation rate of ZnO-Ag@PDA was 97.9% under UV-vis light for 20 mins, which was 16.1% higher than that of ZnO. The photocatalytic activity of ZnO-Ag@PDA reached the maximum after polymerizing for 2 hours. The photocatalytic efficiency of ZnO-Ag@PDA-2h under UV-vis for 30 minutes can reach higher than 99.01%. The photocatalytic performance decreased rapidly with the increasing cycles. When the number of cycles was 5, the degradation rate was 65.84%. Afterward, the degradation rate changed small and became stable.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2022
·
IF 6.267
Yulin Ma,Mingming Liu,Yange Feng,Hongyu Zheng,Yongling Wu
Piezoelectric polyvinylidene fluoride (PVDF) based piezoelectric materials are good candidates for energy harvesting devices and sensing systems. Improving the piezoelectric sensitivity of the electro-spun PVDF fibers is still challenging and highly desirable. In this work, ZnO@Ag nanoparticles were synthesized and utilized as surface modifier to generate a hierarchical structure on the fiber surfaces to construct a flexible and piezoelectric three-phase coupling sensor. The effects of the atomic ratio of Ag:ZnO, surface morphology and particle concentration of ZnO@Ag nanoparticles on the β-phase content, piezoelectricity, wettability and mechanical stability of the sensor device were systematically investigated. The elastic modulus of ZnO@Ag/PVDF membrane is 0.01322 GPa, which is close to that of human skin 0.0188 GPa. Due to synergistic effect of the enhanced electrostatic field polarization and surface hierarchical structure, the ZnO@Ag/PVDF piezoelectricity sensor possessed voltage and current outputs of 15.0 V pp and 1.775 μA respectively, which were 3.5 and 5.4 times higher than pure PVDF-based sensor. The sensitivity of the ZnO@Ag/PVDF nanofiber-based sensor was 2.422 V/kPa, which was 14.4 times higher than that of pure PVDF-based sensor. The sensor has a fast response/recovery time of 30/45 ms. The sensor can accurately detect various physiological strain signals such as cantilever oscillatory excitation, finger press, or walking behavior, and can light-up several light-emitting diodes (LEDs) and charge a capacitor (20 μF) in a short period (2.41 V in 5 Sec). This fiber-based energy harvesting and pressure sensor demonstrates promising applications in self-powered flexible wearable electronic devices in healthcare and home-care fields.
研究领域:
材料科学
·
传感器技术
·
生物医学工程
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2022
·
IF 9.221
Jinyu Huang,Jianwei Li,Zhonglei Zhang,Junda Li,Xiangdong Cao,Jihua Tang,Xuejin Li,Youfu Geng,Jiaqi Wang,Yu Du,Yatao Yang,Xiaofang Pan
Detecting trace ppb-level of formaldehyde (HCHO) in indoor ambient and human exhaled breath using metal oxide semiconductor (MOS) gas sensor has attracted increasing attention. Herein, Ag nanoparticles (Ag NP) modified In 2 O 3 and Au nanocage (Au NC) modified In 2 O 3 as well as bimetal Ag NP and Au NC co-modified In 2 O 3 were successfully prepared via one-step microwave-assisted solvothermal method and were used to construct semiconductor gas sensor. It is exciting to observe that the sensor based on Ag 6 Au 1 /In 2 O 3 exhibits the highest response of 277 toward 5 ppm HCHO at low operating temperature (170 °C), which is about 7 times, 38 times and 102 times higher than 6 wt. % Ag/In 2 O 3 , 1 wt. % Au/In 2 O 3 and pristine In 2 O 3 , respectively. Moreover, the selectivity and detection limit (down to 26 ppb) of Ag 6 Au 1 /In 2 O 3 sensor to HCHO have been proven to be greatly improved. This excellent sensing performance indicates that the proposed bimetal Ag and Au co-modification with synergistic catalysis effect offers an effective design for highly sensitive and efficient HCHO detection devices. Moreover, the mechanism of HCHO sensing with Au and Ag co-loaded In 2 O 3 was explored by the calculations obtained from first-principle density functional theory studies .
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD AND DRUG ANALYSIS
·
2022
·
IF 6.157
Wenwen Chen,Qiang Chen,Wei Zhang,De Zhang,Zhi Yu,Ying Song,Xiubing Zhang,Dejiang Ni,Pei Liang
The problem of aflatoxin contamination emerged gradually in the field of food safety. Surface-enhanced Raman spectroscopy (SERS) is an ultra-sensitive and non-destructive spectroscopy technology with extensive application prospects in the detection field. In this paper, with the detection of AFB1 as the target, Au@Ag NPs substrate with uniform morphology and strong SERS effect was prepared. Furthermore, the intermediates formed by hydrogen bonding between AFB1 and melamine facilitate the binding of toxin molecules to the substrate. Moreover, the AFB1-melamine-Au@Ag NPs detection system was established by optimizing the melamine dosage, and the limit of detection can reach 10 −8 mol/L (M). In this method, AFB1 (concentration range of 10 −4 M – 10 −7 M) in tea oil, the Raman signal intensity of AFB1 shows an excellent linear, logarithmic relationship, and the correlation coefficient is 0.9685. Therefore, this work has achieved simple, sensitive, and stable AFB1 detection and has broad application potential in food safety detection.
研究领域:
分析化学
·
食品科学
·
毒理学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Zhihua Zhao,Yao Wang,Wei Chen,Guixin Jin,Qingsheng Shi,Baocang Zhou,Yafang Pan,Lan Wu,Zhigang Shao
Ammonia (NH 3 ) is one of the most detrimental environmental pollutants emanating from various industrial processes. Therefore, the preparation of ammonia sensors with excellent performance holds the utmost significance, ensuring environmental quality and human health. In this study, through the self-redox reaction between Ti 3 C 2 T x and Ag + , Ag nanoparticles (NPs) loaded Ti 3 C 2 T x MXene (Ag@MXene) were directly prepared. The as-synthesized materials were conducted a comprehensive investigation into their gas-sensing properties and were characterized utilizing analytical techniques such as XRD (X-ray Diffraction), XPS (X-ray Photoelectron Spectroscopy), SEM (Scanning Electron Microscope), and EDS (Energy-Dispersive X-ray Spectroscopy). According to the experimental findings, the Ag@MXene sensor responds to NH 3 remarkably well at room temperature, about 7 times more effectively than pure MXene performs under the same condition. Density functional theory (DFT) investigations were additionally carried out to further clarify the gas-sensing mechanisms. The technique for creating high-precision and room-temperature gas sensors is described in this paper as a workable strategy.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
Inorganic Chemistry Frontiers
·
2025
·
IF 6.4
Qin Zhang,Jiancong Liu,Dongxu Wang,Chengxu Jin,Li Fang,Xingyu Li,Yingjie Jiang,Xin Wang,Chungui Tian
The construction of strong metal-support interaction (SMSI) between ultrasmall metal nanoparticles and semiconductor supports remains a pivotal challenge in developing high-performance photocatalysts for selective CO2 conversion. Herein, we propose a coordination-induced in-situ confinement strategy that synchronously achieves high dispersion of small-sized Ag nanoparticles (Ag NPs) and SMSI with ultrathin C3N4. Through melamine-mediated Ag-N coordination bonds, this approach orchestrates three synergistic effects: (1) Coordination-induced confinement of Ag NPs (~3.3 nm) via covalent Ag-N linkages, yielding an increase in active site density and stability compared to conventional Ag/C3N4; (2) Enhanced electron transfer from C3N4 to Ag, extending carrier lifetimes and suppressing charge recombination; (3) Interfacial electronic redistribution that promotes the generation of *COOH intermediates, steering the reaction pathway toward CO with high selectivity. Furthermore, the coordination-induced thermal condensation induces nitrogen vacancies in C3N4, which act as molecular traps to enhance CO2 adsorption capacity and synergize with Ag sites for efficient CO2 activation. As a result, the optimized catalyst exhibits a remarkable CO yield of 70.63 μmol·g-1·h-1 without the use of sacrificial agents, along with high selectivity (> 98 %) and excellent stability. This work establishes a universal paradigm for engineering metal-semiconductor interfaces through coordination chemistry, offering transformative insights into solar-driven CO2-to-fuel conversion technologies.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 97
·94682-94686
·
IF 3.289
Li Liu,Jie Zhao,Wei-Hua Li,Xiao-Ying Zhang,Hui-Zhong Xu,Kai Li,Yan Kai,Li-Shui Sun,Chao-Qin Li,Fa-Qian Liu
An effective strategy to improve the conductivity of MnO2-based electrodes is to combine them with some conductive materials, such as metal or carbon-based materials. In this work, Ag nanoparticles decorated MnO2/Sulfonated Graphene composite with 3D macroporous structure (3D Ag–MnO2/SG) was synthesized and their performance as electrode material in supercapacitors was studied. The improved conductivity and the elaborate design of 3D porous structure allowed the 3D Ag–MnO2/SG electrode to possess enhanced electrochemical performance. For example, the electrochemical testing results demonstrated that the 3D Ag–MnO2/SG presents a capacitance of 537 F g−1 at 0.5 A g−1, which is much higher than that of MnO2 (∼172 F g−1). Moreover, the 3D Ag–MnO2/SG electrode delivers a higher capacity retention rate in high current density and smaller charge transfer resistance than that of MnO2, which is contributed by the synergistic effect from the Ag nanoparticles and the 3D porous SG.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）