LumiDye™ SMCC活化的藻红蛋白 (SMCC-PE)

货号: M1491723
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。
别名
SMCC活化藻红蛋白 | SMCC活化R-藻红蛋白 | 抗体标记荧光染料
储存条件
2-8°C储存,避光,禁止冷冻
运输条件
低温运输,禁止冷冻
应用
Protein Labeling and Modification
★
规格
库存
价格
数量
250μg
M1491723-250μg
期货 Stock Image
¥379.90
1mg
M1491723-1mg
现货 Stock Image
¥899.90
5×1mg
M1491723-5×1mg
现货 Stock Image
¥3,299.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存,避光,禁止冷冻。低温运输,禁止冷冻 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

  阿拉丁生产的 LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE),即SMCC活化藻红蛋白,是由4-(N-马来酰亚胺基甲基)环已烷-1-羟酸琥珀酰亚胺酯(Succinimidyl-4-(N-maleimidomethyl) cyclohexane-1-carboxylate, SMCC)修饰藻红蛋白(Phycoerythrin, PE)形成,可与含巯基的分子如蛋白等偶联,偶联物常用于荧光显微检测、荧光免疫测定、双色或多色荧光分析、癌细胞表面抗原检测、流式细胞荧光测定等抗体荧光标记以及活体成像等诊断及生物工程技术。

  PE是一种从红藻中分离出来的具有强烈荧光的藻胆蛋白,分子量约为240kDa。PE具有极高的量子产率,呈现出极亮的红橙色荧光,不易淬灭,保存期长,水溶性极佳,与常规有机荧光团相比更明亮、更稳定,因而在生物检测中被广泛用作荧光标签。PE最大激发波长(Ex)为565nm,次级激发波长为480nm和545nm,荧光最大发射波长(Em)为575nm。

本产品为PE与SMCC的连接产物,经纯化并去除过量的SMCC,溶于含3%海藻糖的PBS-EDTA中,SMCC-PE最终以冻干粉的形式提供,长期储存也不损失巯基反应性,保证了SMCC-PE与其它含巯基分子如蛋白质等偶联的最佳性质。

使用方法

  SMCC-PE具有巯基反应性,可以针对抗体等生物大分子进行偶联,这些分子具有半胱氨酸,可以通过还原剂处理以产生游离的巯基基团。当蛋白等生物大分子具有可用的伯胺基团时,也可以通过化学反应添加所需的巯基基团。

  本产品最佳使用浓度为5mg/mL,加入200 µL 纯水,摇晃瓶体使染料完全溶解后可进行标记。注:本产品需现用现配。

  图1 LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE) ( M1491723) 与蛋白质的偶联原理图

保存条件

  4ºC避光保存,12个月内有效,切勿-20ºC或更低温度保存。

注意事项

1. 避免在反应过程中使用含有伯胺和巯基的缓冲液,以减少不必要的竞争反应;

2. 荧光染料均存在淬灭问题,请尽量注意避光,以减缓荧光的淬灭;

3. 本产品的偶联产物,须避光保存,请勿冷冻;

4. 操作过程中,务必穿戴实验服、一次性手套及防护装备;

5. 所有产品仅限于研究用途。

  LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE) is formed by modifying Phycoerythrin (PE) with Succinimidyl-4-(N-maleimidomethyl) cyclohexane-1-carboxylate (SMCC). It contains a maleimide group that reacts with thiol groups of target molecules, such as proteins. This product is commonly used in fluorescence microscopy, fluorescence immunoassays, dual or multicolor fluorescence analysis, cancer cell surface antigen detection, flow cytometry fluorescence assays, antibody fluorescence labeling, as well as diagnostics and biotechnology applications such as live cell imaging.

  PE is a highly fluorescent allophycocyanin protein isolated from red algae, with a molecular weight of approximately 240kDa. PE has a high quantum yield and exhibits intense red-orange fluorescence that is resistant to quenching and has a long shelf life. It is highly water-soluble and more stable than conventional organic fluorophores, making it widely used as a fluorescent label in biological assays. PE's primary absorption peak is at 565nm with secondary peaks at 480nm and 545nm. Its maximum emission wavelength (Em) is 575nm.

This product is a purified conjugate of PE and SMCC. After purification to remove excess SMCC, it is dissolved in PBS-EDTA with 3% trehalose and ultimately supplied as a lyophilized powder. The long-term storage of this product does not affect its thiol reactivity, ensuring the optimal properties for conjugation with other thiol-containing molecules such as proteins. 

Instruction for use

  This product is chemically activated for easy conjugation to biomacromolecules such as antibodies. These molecules contain cysteine residues. Disulfide bonds formed between cystein residues can be treated with a reducing agent, such as DTT and β-mercaptoethanol, to release free thiol groups. Thiol groups can also be added to primary amine groups of biomacromolecule, such as a protein, through chemical reactions.

  The optimal concentration for this product is 5 mg/mL. Add 200 μL of ultrapure water, gently swirl the bottle to ensure complete dissolution of the dye, then proceed with labeling. Note: The SMCC-PE solution must be prepared fresh before each use.

  Figure 1. Schematic diagram of the conjugation of LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE) ( M1491723) to proteins.

Storage

  Store at 4℃ in the dark for up to 12 months. Do not store at -20℃ or lower temperatures.

Matters needing attention

1. Avoid using buffers containing primary amines and thiols during the reaction to minimize unnecessary competitive reactions.

2. Fluorescent dyes are prone to quenching. Please store and use them in the dark to slow down fluorescence quenching.

3. Products conjugated with the SMCC-PE should be stored at 4℃ in the dark. Do not freeze. 

4. During operation, always wear a lab coat, disposable gloves, and protective equipment.

5. All products are for research use only.

规格

别名
SMCC活化藻红蛋白 | SMCC活化R-藻红蛋白 | 抗体标记荧光染料
英文别名
Maleimide Activated PE (SMCC-PE) | SMCC Activated RPE | SMCC Activated R-PE
规格或纯度
BioReagent
稳定性与储存
Store at 2-8℃ long term (12 months). Store in the dark. Do not freeze.
英文名称
LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE)
储存条件
2-8°C储存,避光,禁止冷冻
运输条件
低温运输,禁止冷冻
备注
此产品可替代S750588、S1450060
Excitation(nm)
Blue Laser(488nm), Green Laser(532nm), Yellow-Green Laser(561nm)
Emission(nm)
575nm
Ex/Em(nm)
Ex:565nm;Em:575nm
产品线
生物产品
名称和识别符
分子类型
蛋白质
图片
LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE) (M1491723)  - Flow Cytometry 
Flow Cytometry analysis of Jurkat cells stained with 0.5 μg/mL Recombinant CD45 Antibody (Ab210608). Followed by a goat anti-mouse IgG conjugated to PE using the LumiDye™ SMCC Activated Phycoerythrin (SMCC-PE) (M1491723) at 1 μg/mL for 1 hour at room temperature in the dark. Blue - Isotype control, Mouse IgG (Ab170221). Black - Unlabelled control, cells without incubation with primary antibody.

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

化学和物理性质
敏感性
Light sensitive
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
ZJ26F0231990 分析证书 M1491723
技术文档和文章
溶液计算器

常见问题

什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于2–8 °C、避光条件下保存。请勿冷冻。冷冻可能对本品造成不可逆的损坏。
本产品如何运输?
本产品采用湿冰冷藏运输。收货后请立即拆包,并按上述储存条件保存。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。

需要帮助选择级别?

我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。

查看 BioReagent 级别指南 →

相关产品