细胞冻存液(含血清)

货号: C1491281
有货
级别和纯度: 无菌过滤 ? 除菌过滤 —— 经 0.2µm 过滤去除微生物。作为即用无菌溶液用于培养和敏感应用。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 通过内毒素测试 ? 内毒素检测级 —— 每批检测并标示内毒素水平。当需要用于风险评估的内毒素记录值时使用。 即用型 ? 即用型(ready-to-use)—— 以工作浓度预配供应,无需配制。用于节省时间并减少移液/稀释误差。 用于细胞培养 ? 细胞培养级 —— 内毒素和污染物低,支持细胞存活生长。适用于哺乳动物/其他细胞培养基和添加剂。
储存条件
-20°C储存
运输条件
超低温运输
应用
Cell Culture
★
规格
库存
价格
数量
100ml
C1491281-100ml
现货 Stock Image
¥339.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,即用型,无菌过滤,用于细胞培养,通过内毒素测试 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

-20°C储存。超低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

是否无菌:是 

本产品是一种即用型的培养细胞低温冻存液,已经过无菌处理,待冻存的细胞收集后,加入适量冻存液混匀即可,无需自行配制任何溶液,使用非常便捷,适用于绝大部分的哺乳动物细胞冻存。
产品特点
1、高品质——细胞复苏率在90%以上;
2、使用方便——2~8℃即可稳定保存,无需冷冻,即取即用。
使用说明
细胞冻存步骤
1、收集处于对数生长期贴壁细胞或悬浮细胞于离心管中,并进行细胞计数;
2、取所需冻存细胞数的细胞悬浮液置于离心管中,离心收集细胞(参考离心条件:1,000~2,000rpm,3~5min)。彻底移去离心管中的上清液;
3、加入适量的细胞冻存液于离心管中,调整细胞浓度至1~5×106cells/mL。轻柔混匀,制成细胞冻存悬液;
4、将离心管中的细胞冻存悬液分装于已标示完全的冻存管中;
5、将细胞冻存管放置于可逐步降低温度的装置(如程序降温盒)内并存入-80℃冰箱,确保冷却速度约为1℃/min。通常冷却速度不宜快于0.5℃/min;
6、若需液氮保存,需放-80℃冰箱过夜后移至液氮罐。
细胞复苏步骤
1、取出冻存的细胞,立即放入37℃水浴槽中快速解冻;
2、待冻存管中细胞混合液完全融化后,立即移入含5mL细胞培养基的离心管中,离心收集细胞(参考离心条件:1,000~2,000rpm,3~5min);
3、小心移去上清液。加入适量的新鲜细胞培养基,轻轻混匀,将细胞混合液移至事先准备好的培养容器中;
4、镜检后,可根据具体研究需要及方法进行细胞常规培养。
注意事项
1、使用前需确保细胞冻存液完全融化,并轻轻混匀;
2、若需长期冻存细胞,请转移至液氮罐中贮存;
3、冻存干细胞或原代细胞时,建议事先使用该产品对所冻存的细胞进行为期至少1周的预实验,确认性能后再进行正式冻存;
4、为减小操作过程中交叉污染风险,建议分装使用;
5、冻存液中含有DMSO成分,为了您的安全和健康,请穿实验服并戴一次性手套操作;
6、本产品仅限科研使用。

This product is a pre-sterilized, ready-to-use cryopreservation solution designed for the low-temperature freezing of cultured cells. After harvesting the cells to be preserved, simply add an appropriate amount of this solution and mix thoroughly—no additional preparation is required. It is highly convenient and suitable for cryopreserving most types of mammalian cells.

Features

  • High Quality: Ensures cell resuscitation rates of over 90%.

  • Ease of Use: Stable storage at 2–8°C; no freezing required—ready to use directly.

Instructions for Use

Cell Freezing Procedure

  1. Harvest adherent or suspension cells in the logarithmic growth phase and perform cell counting.

  2. Transfer the cell suspension containing the desired number of cells into a centrifuge tube. Centrifuge to pellet the cells (recommended conditions: 1,000–2,000 rpm, 3–5 min). Carefully remove the supernatant.

  3. Add an appropriate amount of cryopreservation solution to the tube and adjust the cell concentration to 1–5×10⁶ cells/mL. Mix gently to prepare a uniform cell suspension.

  4. Dispense the cell suspension into clearly labeled cryovials.

  5. Place the cryovials in a device capable of controlled cooling (e.g., a programmed freezing container) and transfer to a -80°C freezer, ensuring a cooling rate of approximately 1°C/min. The cooling rate should generally not exceed 0.5°C/min.

  6. For long-term storage in liquid nitrogen, transfer cryovials to a liquid nitrogen tank after overnight storage at -80°C.

Cell Thawing Procedure

  1. Remove frozen cryovials and immediately thaw in a 37°C water bath with gentle agitation.

  2. Once completely thawed, promptly transfer the cell mixture to a centrifuge tube containing 5 mL of cell culture medium. Centrifuge to pellet cells (recommended conditions: 1,000–2,000 rpm, 3–5 min).

  3. Carefully aspirate the supernatant. Resuspend the cell pellet in an appropriate amount of fresh culture medium with gentle mixing. Transfer the cell suspension to a pre-prepared culture vessel.

  4. After microscopic examination, proceed with routine cell culture according to specific research requirements.

Precautions 

  • Ensure the cryopreservation solution is completely thawed and gently mixed before use.

  • For long-term cell storage, transfer cryovials to a liquid nitrogen tank.

  • When cryopreserving stem cells or primary cells, it is recommended to perform a preliminary test using this product for at least one week to verify performance before formal cryopreservation.

  • To minimize the risk of cross-contamination, aliquot the product for repeated use.

  • This solution contains DMSO. Wear a lab coat and disposable gloves for safety.

  • For research use only.

规格

英文别名
Cell Cryopreservation Solution
规格或纯度
无菌过滤, BioReagent, 通过内毒素测试, 即用型, 用于细胞培养
稳定性与储存
Store at 2-8℃ short term (3 months). Store at -20℃ long term (12 months).
英文名称
Cell Freezing Medium (with Serum)
储存条件
-20°C储存
运输条件
超低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到2个结果

批号(Lot Number) 证书类型 货号
ZJ26F0838594 分析证书 C1491281
ZJ25F0927870 分析证书 C1491281
技术文档和文章
无菌过滤
Sterile-Filtered
通过内毒素测试试剂
Endotoxin-tested Reagents
即用型试剂
Ready-to-use Reagents
用于细胞培养
For Cell Culture
细胞样本保存体系对形态保持、抗凝稳定与检测结果的影响
Effects of Cell Sample Preservation Systems on Morphological Integrity, Anticoagulant Stability, and Analytical Results
溶液计算器

常见问题

什么是「无菌过滤」?
「无菌过滤」表示该物料经过加工和检测,适用于特种工业加工。规格侧重于影响该应用性能的杂质——例如,电子应用的金属含量、电池应用的粒度、光学应用的折射率,或对水分敏感工艺的水分含量。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于?20 °C条件下保存。需冷冻保存以维持规定的有效期。
本产品如何运输?
本产品采用保温箱配冰袋运输。收货后请立即拆包,并按上述储存条件保存。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。