流式专用细胞保存液Ⅰ型

货号: F1373929
有货
级别和纯度: 无菌过滤 ? 除菌过滤 —— 经 0.2µm 过滤去除微生物。作为即用无菌溶液用于培养和敏感应用。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。
储存条件
2-8°C储存
运输条件
低温运输
应用
Flow Cytometry
★
规格
库存
价格
数量
250μL
F1373929-250μl
现货 Stock Image
¥79.90
10×250μl
F1373929-10×250μl
现货 Stock Image
¥399.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,无菌过滤 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

  从采集流式细胞标本(骨髓、外周血、淋巴结组织等)开始保护样本,保证抗原表达稳定性;适用于免疫分型、淋巴细胞亚群检测、PNH检测等项目,保证标本质量,从而保证结果的稳定性和正确性,避免诊断错误;对于罕见病例样本或标本检测抗体供应不上时,采用细胞保存液较长时间保存,有助于完善抗体标记,对病例实现完整而全面的检测和诊断。 

  适用于待检流式标本的体外分析检测、表面和胞内CD分子检测,实现多次收集、一次批量检测,既节省了科研时间和精力,又避免了多次处理、检测时仪器或试剂变化对结果的影响。

  Ⅰ型细胞保存液有细胞固定作用,可以保存样本至4周,保存后的样本不可进行细胞培养及死活染料标记。

预期用途:

  用于保存、运输取自人体的细胞,仅用于体外分析检测目的,不用于治疗性用途。 

用法用量:

  适用于流式细胞样本保存。管装细胞保存液每管保存样本1.5~2.5ml。

主要成分:

  产品由Na₂HPO₄、KH₂PO₄、NaCl、KCl、聚乙二醇、纯化水等组成,pH 7.2~7.5。

适用样本类型:

  外周血、骨髓、组织、胸水、腹水、脑脊液等。

使用说明:

1、打开管塞,将采集的细胞样本直接注入管内,上下颠倒混合10次,每管仅限采集一个样本,样本量限1.5~2.5ml。

2、样本与I型细胞保存液混合均匀后,室温下可稳定保存至少2周。如需延长保存时间至4周,可在室温孵育过夜,然后保存于2~8℃。

注意事项:

1、产品用量和样本量之间的比例需严格控制,且需确保充分混匀。

2、采集细胞样本应保证新鲜,以保证保存效果。

3、产品有破损或泄露,禁止使用。

4、本产品仅用于体外诊断。

5、使用时,要将样本与细胞保存液充分混匀后保存。

  It protects samples from the point of collection for flow cytometry specimens (bone marrow, peripheral blood, lymph node tissue, etc.) to ensure antigen expression stability. Suitable for projects such as immunophenotyping, lymphocyte subset detection, and PNH testing, it guarantees sample quality, thereby ensuring the stability and accuracy of results and avoiding diagnostic errors. For rare case samples or when antibody supply for specimen testing is unavailable, using cell preservation solution for longer-term storage helps complete antibody labeling, enabling thorough and comprehensive testing and diagnosis of cases.

  It is suitable for in vitro analysis and detection of flow cytometry specimens, as well as for the detection of surface and intracellular CD molecules. This allows for multiple collections and one-time batch testing, which not only saves research time and effort but also avoids the impact of variations in instruments or reagents during multiple processing and testing sessions.

Flow Cytometry-Specific Cell Storage Solution Type I has a cell fixation effect and can preserve samples for up to 4 weeks. Samples preserved with this solution must not be used for cell culture or viability dye labeling.

Intended Use:

  For the preservation and transportation of human-derived cells, intended solely for in vitro diagnostic purposes, and not for therapeutic use.

Usage and Dosage:

  Suitable for the preservation of flow cytometry samples. Each tube of cell preservation solution is designed to preserve 1.5–2.5 ml of sample.

Main Components:

  The product is composed of Na₂HPO₄, KH₂PO₄, NaCl, KCl, polyethylene glycol, purified water, etc., with a pH of 7.2–7.5.

Applicable Sample Types:

  Peripheral blood, bone marrow, tissue, pleural effusion, ascites, cerebrospinal fluid, etc.

Instructions for Use:

  1. Open the tube cap and directly inject the collected cell sample into the tube. Invert and mix 10 times. Each tube is for a single sample only, with a sample volume limited to 1.5–2.5 ml.

  2. After thorough mixing of the sample with the Type I cell preservation solution, the sample can be stably preserved at room temperature for at least 2 weeks. To extend the preservation time to 4 weeks, incubate overnight at room temperature and then store at 2–8°C.

Precautions

  1. The ratio of product volume to sample volume must be strictly controlled, and thorough mixing must be ensured.

  2. Collected cell samples should be fresh to ensure effective preservation.

  3. Do not use if the product is damaged or leaking.

  4. This product is for in vitro diagnostic use only.

  5. During use, ensure the sample is thoroughly mixed with the cell preservation solution before storage.

规格

规格或纯度
BioReagent, 无菌过滤
稳定性与储存
Store at 2-8℃ long term (24 months).
英文名称
Flow Cytometry-Specific Cell Storage Solution Type I
储存条件
2-8°C储存
运输条件
低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

产品属性
pH 7.2-7.5
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
ZJ25F1230601 分析证书 F1373929
技术文档和文章
溶液计算器

需要帮助选择级别?

我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。

查看 Sterile-filtered 级别指南 → 查看 BioReagent 级别指南 →