植物营养液-铁盐母液 (400×)

货号: I1526086
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 400×
储存条件
2-8°C储存
运输条件
低温运输
应用
Plant Tissue Fixation
★
规格
库存
价格
数量
10ml
I1526086-10ml
现货 Stock Image
¥49.90
100ml
I1526086-100ml
现货 Stock Image
¥149.90
500ml
I1526086-500ml
现货 Stock Image
¥599.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

植物组织培养技术即植物无菌培养技术,又称离体培养技术,是根据植物细胞具有全能性的理论,利用植物体离体的器官 (如根、茎、叶、花、茎尖、果实等)、组织 (如形成层、表皮、表层、髓部细胞、胚乳等) 或细胞 (大孢子、小孢子、体细胞等) 以及原生质体,在细菌和适宜的人工培养基及环境条件下,能够诱导出愈伤组织、不定芽、不定根、最后形成完整菌株的技术。在配制培养基前,为了使用方便、简化操作、用量准确,减少每次配药称量各种化学成分所花费的时间和误差,常将配制培养基所需无机大量元素、微量元素、铁盐、有机物、激素成分分别配制成比需要量大若干倍的浓缩母液,当配制培养基时按预先计算好的量分别吸取各种母液即可。

植物营养液 - 铁盐母液 (400×) 主要由硫酸亚铁、EDTA 或 EDTA 铁钠盐等组成,可用于配制霍格兰 (Hoagland's) 营养液等常用的植物营养液,用于培养植物组织,检测植物生长速率。使用时稀释至 1×,并加入其他组分,每 100ml 溶液可制备 40L 营养液。该试剂仅用于科研领域,不适用于临床诊断或其他用途。

自备材料:

1、蒸馏水或去离子水、稀酸、稀碱、大量元素母液、微量元素母液、有机物、激素

2、pH计、磁力搅拌器、烧杯

操作步骤 (仅供参考):

1、取一升烧杯,加入 800ml 去离子水,加入 2.5ml 铁盐母液 (400×),搅拌状态下再依次加入大量元素母液、微量元素母液、有机物、激素等成分,再用稀酸或稀碱调节 pH 至 5.5~5.9,补水至一升,即为相关的营养液。4℃ 保存 1 个月有效。

2、如需做半剂量 (1/2 剂量),则本试剂用量减半。

注意事项:

1、要根据不同的材料、不同的物种,选择合适的培养基,最好通过实验获得。

2、营养液 pH 值以 5.0~6.5 为宜。如需严格无菌,可 121℃ 高压灭菌 15~20min。

3、试剂开封后请尽快使用,以防影响后续实验效果。

4、为了您的安全和健康,请穿实验服并戴一次性手套操作。

5、本产品仅供科研使用,严禁它用。

Plant tissue culture technology, also known as aseptic plant culture or in vitro culture technology, is based on the theory of plant cell totipotency. It uses isolated plant organs (such as roots, stems, leaves, flowers, shoot tips, fruits, etc.), tissues (such as cambium, epidermis, cortical cells, pith cells, endosperm, etc.), cells (megaspores, microspores, somatic cells, etc.) and protoplasts. Under suitable artificial culture medium and environmental conditions, these explants can be induced to produce callus, adventitious buds and adventitious roots, and eventually develop into intact plantlets.Before medium preparation, to facilitate operation, simplify procedures, ensure accurate dosing, and reduce time consumption and weighing errors of chemical components in each preparation, macronutrients, micronutrients, iron salts, organic substances and plant hormones required for the medium are separately prepared as concentrated stock solutions with multiple times the working concentration. Predetermined volumes of each stock solution are pipetted directly during medium preparation.

Plant Nutrient Solution – Iron Stock Solution (400×) is mainly composed of ferrous sulfate, EDTA or EDTA ferric sodium salt. It can be used to prepare common plant nutrient solutions including Hoagland’s Solution for plant tissue culture and plant growth rate determination. Dilute to 1× working concentration and supplement other components before use; every 100 mL of this stock solution can be used to prepare 40 L of nutrient solution. This reagent is limited to scientific research only and is not intended for clinical diagnosis or other applications.

Materials to Be Prepared:

1. Distilled water or deionized water, dilute acid, dilute alkali, macronutrient stock solution, micronutrient stock solution, organic additives, plant hormones

2. pH meter, magnetic stirrer, beakers

Operating Procedures (For Reference Only):

1. Take a 1 L beaker, add 800 mL deionized water and 2.5 mL Iron Salt Stock Solution (400×). Under continuous stirring, sequentially add macronutrient stock solution, micronutrient stock solution, organics and hormones. Adjust pH to 5.5–5.9 with dilute acid or dilute alkali, then top up the volume to 1 L to obtain the final nutrient solution. Valid for 1 month when stored at 4°C.

2. For half-strength (1/2 strength) medium, reduce the dosage of this reagent by half.

Precautions:

1. Select an appropriate medium according to different explants and plant species; the optimal formula is preferably determined by experiments.

2. The optimal pH range for nutrient solution is 5.0–6.5. For strict sterility requirement, autoclave at 121°C for 15–20 minutes.

3. Use the reagent as soon as possible after opening to avoid adverse impacts on subsequent experiments.

4. For your safety and health, wear a lab coat and disposable gloves during operation.

5. This product is for research use only. Any other application is strictly prohibited.

规格

规格或纯度
BioReagent, 400×
稳定性与储存
Store at 2-8℃ long term (12 months).
英文名称
Plant Nutrient Solution – Iron Stock Solution (400×)
储存条件
2-8°C储存
运输条件
低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到3个结果

批号(Lot Number) 证书类型 货号
ZJ26F0938914 分析证书 I1526086
ZJ26F0938916 分析证书 I1526086
ZJ26F0938915 分析证书 I1526086
技术文档和文章
溶液计算器

常见问题

什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于2–8 °C条件下保存。需冷藏保存以维持规定的有效期。
本产品如何运输?
本产品采用湿冰冷藏运输。收货后请立即拆包,并按上述储存条件保存。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。

需要帮助选择级别?

我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。

查看 BioReagent 级别指南 →