计算溶液所需的质量、体积或浓度。
,适用于对基线干扰要求严格的色谱和分析工作流程。
室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
用于分离人脏器组织淋巴细胞
注意事项:
1. 全过程样本、试剂及实验环境均需在 20 ± 2℃的条件下进行。为获得最佳的实验结果,最好在取样 2 h 内进行实验,样品存放时间越长,细胞分离效果越差。样品放置超过 6 h 后分离效果更差甚至不能达到分离目的。 2. 本实验最好不要使用高聚合材质(如聚苯乙烯)的塑料制品,应使用无静电、低静电离心管及未经碱处理过后的玻璃制品,因为静电作用将导致细胞贴壁、碱处理的玻璃表面会变成毛面,影响细胞分离效果。 3. 吸取过多的淋巴细胞层及分离液层会导致分离液交界处的粒细胞被吸出从而使混杂的粒细胞数量增加。 4. 分离液用量大于组织单细胞悬液样本时,分离效果更佳。
应用范围:
淋巴细胞分离
Product introduction:
Used to isolate lymphocytes from human organs
Matters needing attention:
1. samples, reagents and experimental environment in the whole process shall be carried out at 20 ± 2 ℃. In order to obtain the best experimental results, it is best to carry out the experiment within 2 h of sampling. The longer the sample is stored, the worse the cell separation effect is. The separation effect is even worse after the sample is placed for more than 6 h, or even cannot achieve the purpose of separation. 2. in this experiment, it is better not to use plastic products with high polymerization materials (such as polystyrene), but use non-static, low static ionization heart tubes and glass products without alkali treatment, because the electrostatic effect will lead to cell adhesion, and the surface of alkali treated glass will become rough, which will affect the effect of cell separation. 3. aspirating too many lymphocyte layers and separation liquid layers will cause the granulocytes at the junction of separation liquid to be aspirated, thus increasing the number of mixed granulocytes. 4. when the amount of separating solution is greater than that of tissue single cell suspension sample, the separation effect is better.
Scope of application:
Lymphocyte isolation