Hydrophobic microcapsule modification of nitrogen–phosphorus flame retardant and its application in lignocellulosic materials

The microencapsulation of flame retardants can avoid the problems of water absorption and loss. In this paper, hydrophobic microcapsule-encapsulated ammonium polyphosphate (HMAPP) was prepared by ion exchange and Stöber method and applied to the preparation of hydrophobic flame-retardant kraft paper by impregnation. The microscopic morphology and element analysis of the hydrophobic microcapsules tested by TEM and SEM showed that nano-scale particles with a size of about 100 nm have been successfully prepared, and the core–shell structure has been formed. HMAPP constructed a rough structure with low surface energy on the surface of kraft paper and provided the kraft paper with hydrophobic property. The water contact angle of kraft paper reached 122.7 ° after treated by HMAPP, while it also enhanced the physical strength of the paper. Kraft had the self-extinguishing phenomenon after treated by HMAPP, which attached to the surface of kraft paper were heated and melted to release ammonia to dilute combustible gas and oxygen, and formed a flame-retardant layer containing SiO 2 particles, phosphoric acid, metaphosphoric acid, pyrophosphoric acid, and carbon flakes on the fiber surface. There were C–C, C–O–C bonds in the carbon layer after flame-retardant treatment, indicating that the pentose contained in fiber has not been completely destroyed. In addition, the presence of Si and P elements in the residual carbon indicates that the decomposed flame retardant adheres to the surface of the fiber to block the heat transfer and flame spread.