摘要
Erythritol (ET) has been regarded as a kind of potential phase change material (PCM) for thermal energy storage in the temperature range of 100 to 200 °C. However, the serious supercooling behavior and low thermal conductivity affected its thermal performance and application. Porous ceramic was proved to be useful for decreasing the supercooling degree and enhancing the thermal conductivity of ET. And, this study proposed a novel strategy to improve properties of mullite porous ceramic (MPC) by the method of carbonization. The mullite porous ceramic (MPC) was fabricated by freeze-drying method and different concentration of sucrose solutions was used as carbon source to prepared different kinds modified MPC (C/MPC), then the composite ET PCM (ET-C/MPC) was fabricated by adsorbing ET into C/MPC. The XRD and FTIR characterizations showed there was no chemical reaction between ET and modified MPC. And the XPS and SEM characterization indicated that a complete and tight carbon layer was formed on the surface of MPC. The concentration of sucrose solution would affect the porosity and mechanical properties of MPC. In addition, the carbon layer improved the thermal conductivity of MPC and composite ET PCM. The maximum thermal conductivity of ET-C/MPC was 1.43 W/(m·K) increased about 98.6% in comparison with that of pure ET. Also, the supercooling tests presented the carbon layer helped promoted nucleation and significantly suppressed supercooling of ET. The supercooling degree of ET-10C/MPC was only 6.7 °C while that of ET was 52.7 °C. The DSC curves showed that sample ET-10C/MPC possessed highest melting enthalpy of 242.5 J/g. Moreover, it could exhibit excellent thermal cycling stability with melting enthalpy of 210.8 J/g after 500 thermal cycles. These enhanced properties suggested that sample ET-10C/MPC were promising candidates for advanced medium-to-low temperature thermal energy storage application.
危险品化学品经营许可证(带存储)