摘要
Marine corrosion and biofouling represent significant threats to marine infrastructure. Multi-layer coating systems are inherently complex and suffer from susceptibility to interlayer failure. This study presents an integrated anti-corrosion and anti-fouling coating by modifying epoxy resin with urushiol-derivative. The derivative was synthesized by reacting hydride-terminated polydimethylsiloxane (HPDMS) with the unsaturated side chains of urushiol. Coatings with HPDMS contents of 0.2 wt% (UEP‑0.2), 0.4 wt% (UEP‑0.4), and 0.6 wt% (UEP‑0.6) were prepared and compared with unmodified UE. Characterization confirmed HPDMS incorporation, with surface silicon content reaching ∼20 wt% and a WCA> 100°, indicating high hydrophobicity and silicon enrichment. Mechanical tests showed that UEP‑0.4 achieved an optimal balance, with high toughness of 6.7 MJ/m 3 and adhesion strength of 10.1 MPa. EIS demonstrated the optimized anti-corrosion performance of UEP-0.4, exhibiting the highest |Z| 0.01 Hz with 7.75 × 10 9 Ω·cm 2 after 60 days of immersion. Under a flow of 1.5 m/s, UEP-0.4 exhibited a Navicula incerta adhesion ratio of 5.5 %, which is not only 34.2 % lower than that of UE but also represents a 68.8 % reduction compared to its performance under a flow of 0 m/s. UEP-0.4 demonstrates a synergistic combination of robust mechanical, anti-corrosion, and anti-fouling properties, providing a promising strategy for high-performance integrated coatings based on functionalized urushiol.
危险品化学品经营许可证(带存储)