JOURNAL OF MOLECULAR CATALYSIS B-ENZYMATIC
·
2013
·
IF 2.823
Jian-Yong Zheng,Jia-Yu Wu,Yin-Jun Zhang,Zhao Wang
The mycelium of Aspergillus oryzae WZ007 was successfully developed to kinetic resolution of ( R , S )-ethyl-2-(4-hydroxyphenoxy) propanoate (( R , S )-EHPP) for production of ( R )-ethyl-2-(4-hydroxyphenoxy) propanoate (( R )-EHPP). The key biocatalytic process parameters (pH, temperature, rotation speed and substrate concentration) were optimized. Under the optimum conditions, the optical purity of ( R )-EHPP was improved up to >99% when the conversion was above 49%. A. oryzae WZ007 whole-cell lipase exhibited high reaction capacity, enantioselectivity and good reusability. The tolerable substrate concentration was 0.5 mol/L, and dry mycelium of A. oryzae WZ007 maintains over 80% of its initial activity after eight repeating cycles. Therefore the enzymatic preparation of ( R )-EHPP route was suitable for industrial application.
研究领域:
生物化学
·
微生物学
·
制药工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Nan Li,Yuhua Niu,Wengang An,Zonghang Liu,Fangyi Ruan,Guodong Fan
In this study, AgBr/Bi 4 Ti 3 O 12 /Bi 2 Sn 2 O 7 (ABr/BTO/BSO) composites were successfully synthesized to facilitate multi-channel fast charge transfer. This directs the charge carriers to travel along multichannel pathways and suppresses carrier recombination. The mechanisms underlying charge transfer in the dual S-scheme heterojunction composites were elucidated using density functional theory (DFT) and in situ irradiated X-ray photoelectron spectroscopy (ISI-XPS). Furthermore, electron spin resonance (ESR) and burst experiments verified h + , ·O 2 - , and ·OH as the primary active species in the catalytic process. The ABr/BTO/BSO composites demonstrated exceptional photocatalytic redox capabilities, completely degrading rhodamine B (RhB) and achieving degradation rates of 77.21% for tetracycline (TC) and 81.04% for Cr (VI). Both experimental and theoretical analyses confirmed the intrinsic efficacy of photo-induced electron movement within the composites. This research introduces innovative design concepts and strategies for the advanced exploration of electron channel transfer in ABr/BTO/BSO ternary composites and the development of novel composite photocatalytic systems.
研究领域:
材料科学
·
环境科学
·
理论化学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Jie Zhang,Chengcheng Yuan,Yong Zhang,Changhong Sun,Jiaguo Yu,Liuyang Zhang
Photocatalytic hydrogen peroxide production offers a greener alternative, but its efficiency is limited by high carrier recombination. Covalent organic frameworks, with their highly ordered structures and tunable properties, are promising photocatalysts. However, their application in H 2 O 2 production has been constrained by the lack of effective strategies to enhance catalytic activity. In this study, BiOCl/COF (TFPB-BPY) S-scheme heterojunctions were prepared via a simple in-situ growth method. The heterojunction exploits the nitrogen-rich architecture and charge transport of the COF, combined with the broad light absorption and internal electric field of BiOCl. This synergy enables superior visible light absorption, efficient charge separation, and suppressed recombination. Mechanistic studies confirmed the S-scheme mechanism as the key to its enhanced performance. This work provides a scalable and eco-friendly strategy for improving COF-based photocatalysts through S-scheme heterojunctions, offering a pathway for sustainable H 2 O 2 production and advancing the rational design of photocatalysts for green energy applications.
研究领域:
材料科学
·
环境科学
·
能源科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Zhiliang Jin,Cheng Yang
The research in the field of photocatalysis has progressed, with the development of heterojunctions being recognized as an effective method to improve carrier separation efficiency in light-induced processes. In this particular study, CuCo 2 S 4 particles were attached to a new cubic CdS surface to create an S-scheme heterojunction, thus successfully addressing this issue. Specifically, owing to the higher conduction band and Fermi level of CuCo 2 S 4 compared to CdS, they serve as the foundation and driving force for the formation of an S-scheme heterojunction. Through in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, the direction of charge transfer in the composite photocatalyst under light exposure was determined, confirming the charge transfer mechanism of the S-scheme heterojunction. By effectively constructing the S-scheme heterojunction, the d-band center of the composite photocatalyst was adjusted, reducing the energy needed for electron filling in the anti-bonding energy band, promoting the transfer of photogenerated carriers, and ultimately enhancing the photocatalytic hydrogen production . performance. After optimization, the hydrogen evolution activity of the composite photocatalyst CdS-C/CuCo 2 S 4 -3 reached 5818.9 μmol g −1 h −1 , which is 2.6 times higher than that of cubic CdS (2272.3 μmol g −1 h −1 ) and 327.4 times higher than that of CuCo 2 S 4 (17.8 μmol g −1 h −1 ), showcasing exceptional photocatalytic activity. Electron paramagnetic resonance and in situ X-ray photoelectron spectroscopy have established a theoretical basis for designing and constructing S-scheme heterojunctions, offering a viable method for adjusting the D-band center to enhance the performance of photocatalytic hydrogen evolution.
研究领域:
材料科学
·
能源化学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ChemNanoMat
·
2022
·Vol. 8
·期 10
·e202200268
·
IF 3.82
Mengmeng Liu,Jingjing Li,Pengfei Wang,Shuai Chen,Zhengping Dong,Fengwei Zhang
Graphical The encapsulation of Pt/TiO 2 -450H catalyst with SMSI into zeolite silicalite-1 (S-1) is reported. The resulting Pt/TiO 2 @S-1 catalyst dispalyed superior catalytic performance especially for halogenated nitroaromatics and without degradation in selectivity after 7 cycles. It is attributed to the high surface area, SMSI effect in confined space and the pore structure of S-1 with selective adsorption of substrates. The encapsulation of metal nanoparticles (NPs)-based active sites and homogeneous catalysts in nanoporous materials has been of highly research focus for tuning their catalytic activity, selectivity and stability. Although the catalysts with strong metal-support interaction (SMSI) hold the reversible encapsulation feature in a certain atmosphere, there is still a lack of systematic research on them in a real confined environment. Herein, we present a highly selective and stable Pt/TiO 2 @S-1 catalyst, which is prepared by in-situ growth of classical silicalite-1 on the external surface of Pt/TiO 2 -450H pre-catalyst with SMSI effect. Encouragingly, the encapsulated 20Pt/TiO 2 @S-1 catalyst demonstrates unprecedented catalytic performance for various nitroaromatics and without any degradation in selectivity after 7 cycles (>99%) for the hydrogenation of 1-chloro-4-nitrobenzene. Such situation is attributed to the high surface area, SMSI effect in confined space as well as the pore structure of silicalite-1 with selective adsorption of substrates.
研究领域:
催化
·
化学工程
·
材料科学
·
环境化学
✓ 已验证
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2021
·
IF 3.626
Jianan Li,Wenbo Sun,Xinyong Li,Hangfan Ma,Yaxuan Li,Chong Peng
Photocatalysis is an effective means to convert CO 2 and solar energy into high value-added chemicals. Herein, the surface gradient S doped CuCo 2 O 4 microflowers were fabricated by an in situ topotactic engineering strategy. This photocatalyst presented CO 2 photoreduction with a satisfying activity (5 h, 181 μmol) and stability (94.5% retention). Additionally, the theoretical calculations indicated the fomated M-S bond could be favorbale to facilitate the initial CO 2 ⁎ binding and promote the formation of COOH ⁎ intermediates. This work provides a novel strategy for the fabrication of effective photocatalysts and highlights an in-depth understanding of micro-level regulation towards photocatalytic overall performance.
研究领域:
材料科学
·
化学
·
环境科学
·
纳米技术
✓ 已验证
DOI
高影响因子
Water Cycle
·
2023
·
IF 0
Jiaolong Zhang,Shuting Gou,Zhe Yang,Chaolin Li,Wenhui Wang
The application of promising g-C 3 N 4 has been limited by poor photogenerated electron-hole separation and limited absorption for visible light. Sulfamethoxazole (SMX) is a typical antibiotic drug that is used worldwide and hard to be disposed through conventional wastewater treatment methods. Herein, S-scheme Fe 2 O 3 /g-C 3 N 4 heterojunction was successfully prepared via a facile one-step sintering method and applied to photodegrade SMX under visible light irradiation. The integration of Fe 2 O 3 and g-C 3 N 4 shows superior charge separation and light absorption ability. As a result, the removal efficiency of 11 wt% Fe 2 O 3 /g-C 3 N 4 reaches to 99.2% within 30 min, which is visibly higher than 59.5% of pure g-C 3 N 4 . ·O 2 − and ·OH are demonstrated to be the predominant active species for SMX photodegradation, and the possible degradation pathway is also proposed based on electronic band structure of Fe 2 O 3 /g-C 3 N 4 heterojunction. This study presents a facile construction of g-C 3 N 4 based S-scheme photocatalyst and offers an environmentally friendly approach to effectively remove organic pollutants using renewable solar energy.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
TRANSACTIONS OF TIANJIN UNIVERSITY
·
2012
·Vol. 18
·期 5
·315-319
·
IF 0
Feng Yakai,Chen Chengbin,Zhang Li,Tian Hong,Yuan Wenjie
A series of novel copolymers were successfully synthesized by ring-opening polymerization (ROP) of 3(S)-methyl-morpholine-2,5-dione (MMD) and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one (MBC) using stannous octoate as catalyst. The copolymers were characterized by means of 1H-NMR and FT-IR spectroscopy. Gel permeation chromatography (GPC) test shows that the average-number relative molecular mass and average-weight relative molecular mass slightly increase with the increase of MBC content in feed. The results of differential scanning calorimetry (DSC) demonstrate that the glass transition temperature of copolymers increases with the increase of MBC content in copolymers. The copolymers of MMD and MBC are amorphous copolymers, as indicated by DSC results, while the homopolymer of MMD is semicrystalline.
研究领域:
高分子化学
·
材料科学
✓ 已验证
产品关联
DOI
Journal of Materials Chemistry C
·
2015
·Vol. 3
·期 34
·8844-8851
·
IF 4.696
Sheng Cao,Jialong Zhao,Weiyou Yang,Chengming Li,Jinju Zheng
In the present work, we reported the synthesis of Mn2+-doped Zn–In–S quantum dots (QDs) with high optical performance in a controlled manner. The effects of the temperature, the introduced ODE-S amount and Zn/In ratios in the raw materials, as well as the Mn2+ doping concentrations on the photoluminescence (PL) properties of Mn2+-doped Zn–In–S QDs were investigated systematically. The resultant QDs exhibit tunable bandgaps ranging from 2.9 to 3.7 eV, well-resolved Mn2+ d–d emission with a PL quantum yield (QY) of 56% and a surprisingly long excited state lifetime up to ∼4.2 ms, suggesting their excellent PL properties. Meanwhile, the initial high PL QY of the obtained Mn2+-doped Zn–In–S QDs in organic solvents could be preserved very well once they were transferred into aqueous media via ligand exchange. Furthermore, the as-synthesized QDs exhibit excellent thermal stability up to 200 °C in a crude solution.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2024
·Vol. 29
·期 9
·1931
·
IF 4.2
Yuhong Lin,Zhuoyuan Chen,Chang Feng,Li Ma,Jiangping Jing,Jian Hou,Likun Xu,Mingxian Sun,Dongchu Chen
In this study, S-doped graphitic carbon nitride (S-C3N4) was prepared using the high-temperature polymerization method, and then S-C3N4/AgCdS heterojunction photocatalyst was obtained using the chemical deposition method through loading Ag-doped CdS nanoparticles (AgCdS NPs) on the surface of S-C3N4. Experimental results show that the AgCdS NPs were evenly dispersed on the surface of S-C3N4, indicating that a good heterojunction structure was formed. Compared to S-C3N4, CdS, AgCdS and S-C3N4/CdS, the photocatalytic performance of S-C3N4/AgCdS has been significantly improved, and exhibits excellent photocatalytic degradation performance of Rhodamine B and methyl orange. The doping of Ag in collaboration with the construction of a Z-scheme heterojunction system promoted the effective separation and transport of the photogenerated carriers in S-C3N4/AgCdS, significantly accelerated its photocatalytic reaction process, and thus improved its photocatalytic performance.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Kai An,Hongyan Jia,Ruobing Cheng,Yong Guo,Xiaohui Liu,Yanqin Wang
Pt-based bimetallic catalysts have gained more and more attention in propane dehydrogenation (PDH), but still suffer from the high cost and poor stability. In this work, a PtCu@S-1 catalyst with an extremely low loading of Pt (0.047 wt%) is prepared by in-situ hydrothermal synthesis and employed in PDH. An excellent productivity (propylene yield: 471.8 molC 3 H 8 ⋅ g Pt -1 ⋅ h −1 ) is achieved at 600 °C with a weight hour space velocity of 25.80 h −1 . After 50 h of reaction at 600 ℃, 0.047Pt0.19Cu@S-1 catalyst still remains sinter-free, with a deactivation rate of only 0.006 h −1 . Various characterizations show that Cu 0 co-existed with Pt 0 in PtCu@S-1 catalyst plays an important role, greatly improved catalyst reactivity and stability. At high weight hour space velocity (44.5 h −1 ), the propylene productivity can reach 1056.4 molC 3 H 8 ⋅ g Pt -1 ⋅ h −1 . This work provides a new way for the design of extremely low Pt-loaded PDH catalysts with excellent performance at high temperatures.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2019
·Vol. 7
·期 5
·1307-1315
·
IF 6.641
Bin Zeng,Fei Chen,Zhenyang Liu,Zhongyuan Guan,Xu Li,Feng Teng,Aiwei Tang
Herein, we demonstrated a seed-mediated growth method for the synthesis of ternary AgInS2 (AIS) and quaternary Ag–In–Zn–S (AIZS) nanocrystals (NCs) by means of a partial cation exchange with In3+ and Zn2+ ions. Binary Ag2S NCs with different sizes were synthesized first, which then acted as the seeds to prepare different-sized AIS NCs through the incorporation of In3+. The formation mechanism of AIS NCs was studied in terms of the temporal evolution of the morphology and crystal structure, and the heterostructured Ag2S-AIS NCs were formed as intermediates during the growth process of AIS NCs. Variation in the Ag/In feeding ratios from 1 : 1 to 1 : 3 led to a broad tuning of the optical band gap and photoluminescence (PL) maximum of AIS NCs, in which very small-sized AIS NCs with a tetragonal phase were obtained. Subsequently, the incorporation of Zn2+ into AIS NCs resulted in the widening of the optical band gap and the shift of the PL maximum to higher energy with the enhancement of the absolute PL quantum yields (PLQYs). When the reaction temperature was increased, the PL emission maximum could be tuned from 2.04 to 2.33 eV and the absolute PLQYs could be tuned from 16% to 58%. Time-resolved PL spectroscopy was used to study the PL decay dynamics of the AIS and AIZS NCs, and the PL emission was related to the recombination of the surface-related states, intrinsic defects and donor–acceptor (D–A) pairs. The ternary and quaternary Ag-based semiconductor NCs have long-lived excitons, which may have promising applications in the field of energy conversion.
研究领域:
材料科学
·
纳米技术
·
光学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）