Journal of Materials Chemistry A
·
2025
·
IF 9.5
Miaomiao Liu,Peiru Wang,Yao Tong,Yuhan Wu,Zuoyi Xiao,Shangru Zhai,Qingda An,Bita Farhadi,Kai Wang
Interface engineering has emerged as a pivotal strategy to overcome the intrinsic limitations of transition metal layered double hydroxides (LDHs), particularly their severe restacking tendency and sluggish reaction kinetics in supercapacitor applications. Herein, we propose a heterointerface construction paradigm through the assembly of lignin-derived hollow carbon (LHC) spheres on pseudocapacitive nickel–cobalt–manganese LDH (NiCoMn-LDH) nanosheets via a facile co-precipitation methodology. The incorporation of LHC nanospheres serves as an effective separator to suppress the interlayer restacking of NiCoMn-LDH nanosheets while maximizing the accessibility of electroactive sites. Our density functional theory (DFT) calculations reveals the synergistic coupling between the faradaic NiCoMn-LDH and electric double-layer capacitive LHC, which endows the composite structure with exceptional charge storage characteristics; a specific capacity of 1144.60C g−1 is achieved at 0.5 A g−1, together with exceptional high-rate capability, which is evidenced by 74.80% capacity retention at 10 A g−1. The engineered interface further mitigates structural degradation during cycling, enabling an asymmetric supercapacitor with a record-breaking energy density of 67.86 Wh kg−1 at 399.99 W kg−1 and superior cycle ability (the device retains 87.15% of its initial capacity after 10 000 charge–discharge cycles). This study provides fundamental insights into interfacial charge storage mechanisms for next-generation energy storage devices, in addition to establishing a sustainable pathway for biomass-derived carbon architectures.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2025
·
IF 3.3
Qinghong Meng,Jiaming Yuan,Xiangming Li,Wanjun Yu,Ji-Guang Li
Equimolar Ca2+ and Zr4+ doping was implemented to establish novel garnet-type Gd3‒xCaxAl2.95Ga2‒xZrxO12:0.05Cr3+ (x=0‒2.0) far-red (FR) phosphors. The quantum efficiency and temperature-dependent luminescence analysis successfully produced the optimal x=0.5 phosphor, which exhibited highly efficient (IQE=92.8%, EQE=31.6%) broadband FR-emission peaking at ~714 nm (full-width at half-maximum ~81 nm) and excellent thermal stability (95.5%@423 K) under 450 nm light excitation. Its performance is far superior to that of most reported Cr3+ activated FR-emitting garnet phosphors, and the emission spectrum can well superpose with the absorption band of the far-red phytochrome, making this phosphor have huge potential application in the construction of high-quality FR pc-LED used for plant lighting.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2025
·
IF 9.5
Ying Xu,Kang Xue,Furong Li,Chang Song,Minhua Ai,Zehao Han,Chengxiang Shi,Ruijie Gao,Zhen-Feng Huang,Xiangwen Zhang,Lun Pan,Ji-Jun Zou
Methylcyclohexane (MCH) / toluene (TOL) system is considered as a promising candidate for large-scale green hydrogen storage, and the catalytic MCH dehydrogenation is the key reaction for the effective system recycling. As the important property, the electronic structure of Pt active sites determines the dehydrogenation dynamics, but the mechanism for its effect on dehydrogenation is still ambiguous. Herein, we proposed a support (CeO2) facet mediated method to rationally regulate metal-support interaction as well as d-orbital electron occupation of Pt sites for efficient MCH dehydrogenation. The characterizations indicate the interfacial Pt-O coordination numbers are reduced from Pt/CeO2 (110) to Pt/CeO2 (111) and Pt/CeO2 (100), leading to the gradually decreased interfacial charge transfer and metal-support interaction (MSI). The in-situ characterization of catalytic reactions and DFT calculation results confirm the rate-limiting step of dehydrogenation is the desorption of products H2 and TOL. The MCH dehydrogenation performances show the catalytic activities of Pt/CeO2 (111) > Pt/CeO2 (110) > Pt/CeO2 (100). Notably, Pt/CeO2 (111) with moderate MSI induces a moderate eg-orbital electron occupation of Pt-O-Ce sites to accelerate H2 formation and desorption, while the resulted least t2g-orbital electron occupation of Pt-Pt sites weakens TOL adsorption, therefore showing the best TOL yield of 91.2% at 350 °C and WHSV of 4.62 h-1. This work reveals the mechanism of support-facet-mediated d-orbital electron occupation regulation of Pt sites, which provides a guidance for the rational design of highly efficient dehydrogenation catalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FLUORESCENCE
·
2025
·
IF 3.1
Zhou Siqi,Ruan Chen,Hou Yuxian,Zou Lina,Wang Rong,Li Gaiping
Dopamine (DA), a crucial neurotransmitter, plays a pivotal role in various physiological and pathological processes, making the development of simple and novel detection methods highly significant. Herein, a facile ratiometric platform was constructed for ultrasensitive detection of DA based on the nanozyme facilitated in-situ fluorogenic reaction. Firstly, GMP-Ce 4+ CPs with enhanced oxidase-like activity were produced via an extremely simple one-step self-assembly method, which could efficiently initiate the fluorogenic reaction between DA and β-naphthol (β-NAP). Relying on the enhanced catalytic ability and the specificity of the fluorogenic reaction, a ratiometric platform was established by introducing rhodamine B (RhB) as a fluorescence reference. The proposed ratiometric method exhibited wide linear range (0.001-30 µM), ultra-high sensitivity (LOD 0.6 nM) and great selectivity. Finally, the designed method has been used for DA assay in practical health blood serum (HBS) samples with satisfactory results, demonstrating its potent analytical applicability in the biosensing field. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DALTON TRANSACTIONS
·
2025
·
IF 3.3
Taozhu Li,Yu Liang
The application of NiTi alloys in the electrooxidation of urea is primarily based on their unique electrochemical activity and stable chemical properties. It has been found that during electrochemical cyclic voltammetry treatment, a Ni(OH)2 layer with high catalytic activity can be formed on the surface of NiTi alloys, which significantly enhances the efficiency of urea electrooxidation. Electrochemical studies reveal that NiTi@Ni(OH)2 exhibits voltage-dependent selectivity between urea oxidation and water oxidation. When the applied potential is less than 1.47 V, the electrode undergoes urea oxidation; in contrast, when the applied potential exceeds 1.54 V, the electrode reaction switches to water oxidation. That is, the selectivity between urea oxidation and water oxidation can be achieved by adjusting the applied potential, which provides a new approach for the selectivity control of electrochemical reactions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Analytical Methods
·
2025
·
IF 2.6
Zheng Chang,Zhenyuan Duan,Junpeng Li,Xiangze Meng
In this study, hemin-functionalized polyethyleneimine/silica nanoparticles (hemin/PEI/SiO2 NPs) served as an electrochemical label for ultrasensitive detection of prostate-specific antigen (PSA), a clinically important prostate cancer biomarker. A poly(thionine)/carbon nanotube (PTh/CNTs) multilayer film was fabricated on a glassy carbon electrode (GCE) via integrated electropolymerization and electrostatic layer-by-layer (LbL) assembly, forming a {PTh/CNTs}2/PTh modified GCE with abundant amino groups. PSA capture antibodies (Ab1) were then covalently immobilized on the modified electrode through glutaraldehyde (GA) crosslinking, leveraging the film's surface-exposed amino groups. Furthermore, hemin/PEI/SiO2 NPs were synthesized through amine-carboxyl interactions between carboxyl groups of hemin and amine groups of PEI/SiO2 NPs. The immunosensor assembly employed a sandwich-type electrochemical platform using PSA detection antibody (Ab2)-conjugated hemin/PEI/SiO2 NPs. The specific antibody-antigen binding enables efficient electron transfer across the nanoscale spacing (several nanometers) between hemin/PEI/SiO2 NPs and the {PTh/CNTs}2/PTh multilayer film. In this architecture, CNTs serve as excellent electron mediators, significantly facilitating electron transport. Moreover, the high-density immobilization of hemin on PEI/SiO2 NPs significantly amplifies the electrochemical redox currents of the multilayer film through proximity effects. This enhanced electrical signal enables highly sensitive detection of target protein antigen–antibody binding events. Consequently, by correlating the enhanced reduction peak current of the immunosensor with PSA concentration, highly sensitive detection of PSA at various concentrations can be achieved. Under optimized conditions, it exhibited a linear response to logarithmic PSA concentrations (0.01 pg mL−1 to 100 pg mL−1, R = 0.9963), with an ultralow detection limit of 3.0 fg mL−1 (S/N = 3). Furthermore, the immunosensor demonstrated outstanding analytical performance in human serum samples (96.0–103% recovery, n = 3), confirming its high accuracy for clinical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·
IF 2.5
Hongyan Wang,Zixin Zhu,Yongxiang Su,Gui-Zhi Wang,Xinpeng Du,Fan Xie,Xiang Li
Vertical graphene (VG) possesses intrinsic high electrical conductivity and superior mechanical buffering, which endow the silicon-vertical graphene (SiVG) anodes with rapid electron transport channel and effective suppression of volumetric expansion. However, challenges persist due to weak interfacial interactions (particle-particle and particle-conductive agent) and the formation of unstable solid-electrolyte interphase (SEI) layers. To address these limitations, we developed a supramolecular cross-linked conductive polymer binder by combining hyperbranched tannic acid (TA) with the conductive polymer poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). Through hydrogen bonding and π-π conjugation, this binder significantly enhances the interfacial adhesion between binders and SiVG particles, thereby integrating active materials, binders, and current collector into a robust conductive network. Crucially, the polyphenolic functional groups from TA synergize with conductive polymer chains to simultaneously stabilize SEI formation and accelerate interfacial electron transfer kinetics. As a result, the SiVG/TAPP composite anode delivers a reversible specific capacity of 2449.3 mAh g-1 after 100 cycles at 1.0 A g-1 (86.9 % capacity retention), while maintaining 1091.2 mAh g-1 at a high current density of 8.0 A g-1.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2025
·
IF 4.8
Saleem Muhammad Asad,Shahid Sumaira,Saleem Muhammad Faizan
In conventional cotton dyeing with reactive dyes, a huge amount of salt is consumed, or large quantities of cationic agents are required for cotton cationization to enable salt-free dyeing. Subsequently, most portion of these chemicals end up in the effluent. This study utilized low molecular weight sericin, waste from the silk degumming process, to achieve clean, efficient, salt-free dyeing of cotton fabric. The modification of cotton with cationized sericin introduced positive charges onto cotton, as zeta potential shifted from − 12.9 to 7.5 mV. The dyeing performance evaluation showed that cotton treated with cationized sericin achieved 20% higher color strength as compared to the conventional salt-assisted process. About 84% of the cationic sericin in the residual bath can be effectively reused with minimal chemical replenishment. This reuse process maintains stable modification and salt-free dyeing performance over ten cycles of bath reuse. Compared to traditional dyeing and salt-free dyeing using a fresh cationization bath for modification, modification using the reused bath and salt-free dyeing process achieved a reduction in chemical consumption of 98% and 55% per kilogram of cotton fabric, respectively. This approach not only minimizes pollution but also optimizes chemical usage and reduces dyeing costs, offering an innovative and cost-effective solution for industrial salt-free dyeing of cotton fabrics.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Qingchun Lan,Yu Wang,Jinpei Du,Shuqin Fang,Xiaoming Ma
In this study, we developed an ultrasensitive competitive label-free electrochemical immunoassay for the detection of aflatoxin B1 (AFB1) based on a Cu/Cu 2 O/C nanocomposite platform. The sensing matrix was fabricated by thermal decomposition of a two-dimensional copper-organic framework, inheriting the porous structure and large surface area characteristic of MOFs while exhibiting enhanced electrical conductivity. In this competitive detection scheme, free AFB1 molecules compete with electrode-bound AFB1-BSA conjugates for limited antibody binding sites. The resulting variation in electrochemical signals exhibits an inverse correlation with toxin concentration, facilitating ultra-trace detection with an impressive limit of detection of 1.83 pg/mL. The immunosensor features dual linear detection ranges of 10–100 pg/mL and 150–1000 pg/mL, with high specificity and reproducibility. It responds significantly to AFB1, showing minimal cross-reactivity with AFB2 and AFG1, and negligible responses to unrelated mycotoxins. Reproducibility testing yielded an RSD of less than 0.2 %. The sensor retains over 95 % of its initial response after seven days at 4 °C, indicating stability. Validation with spiked cornstarch samples showed recovery rates of 99.68 % to 104.38 % and an RSD of less than 4 %, confirming its effectiveness in real sample analysis. This study establishes a generalizable approach for constructing high-performance immunosensing platforms that are applicable to various mycotoxins and biological targets.
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2025
·
IF 12.5
Yi Zhang,Zhipeng Qiu,Bo Liu,Ling Chen
Sustainable polysaccharide-based carriers offer a promising route to overcome the instability and aggregation issues of indocyanine green (ICG), a clinically approved phototherapy dye. In this study, a scalable approach is presented to construct quaternized microcrystalline cellulose (QMCC) carriers with tunable surface charge for stabilized and high-capacity ICG loading. By modulating the degree of quaternary ammonium substitution, QMCC effectively modulated ICG aggregation behavior, promoting the formation of broadened and red-shifted near-infrared absorption bands with enhanced photostability. Among them, QMCC2-ICG exhibited a balanced electrostatic and steric environment through the π-π stacking interaction, favoring the formation of hybrid aggregates with broad-spectrum absorption profiles and superior optical stability. This enabled high ICG loading (388.3 mg/g), elevated photothermal conversion efficiency (55.0 %), and robust singlet oxygen generation. 4 T1 in vitro experiments demonstrated improved cell phototoxicity, ROS-mediated cytotoxicity, and tumor cell migration inhibition. In vivo , QMCC2-ICG also showed excellent hemocompatibility and enabled strong photoacoustic imaging and tumor ablation in 4 T1-bearing mice. Histological and molecular assays confirmed apoptosis induction, proliferation inhibition, and biosafety. This work presents a sustainable polysaccharide platform that enables aggregation-state control and excited-state tuning for improved multimodal phototherapy, highlighting the role of surface charge and morphology in driving green therapeutic material design.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Fengying Ma,Jianqing Wu,Xinyu Chen,Jinhai Leng,Yue Liu,Yinghua Yao,Cha Jing,Shanshan Shang,Daiqi Ye
Volatile organic compounds (VOCs), particularly toluene, present serious environmental and public health concerns due to their carcinogenicity and contribution to forming ozone (O 3 ) and fine particulate matter (PM 2.5 ). Selective adsorption using porous materials offers a promising strategy for efficiently removing VOCs at medium to low concentrations; however, many existing adsorbents suffer from limited capacity and poor regenerability. This study systematically investigated three porphyrin-based metal-organic frameworks (PMOFs), i.e. , Al-PMOF, PCN-222, and PCN-224, for toluene adsorption. Static adsorption isotherms revealed that PCN-222 exhibited superior performance due to its highest total pore volume. In contrast, dynamic breakthrough experiments demonstrated that Al-PMOF achieved the highest toluene adsorption capacity (530.6 mg g −1 ), surpassing PCN-222 and PCN-224 by factors of 1.6 and 1.5, respectively. The enhanced performance of Al-PMOF was attributed to its high microporosity and rapid intraparticle diffusion kinetics. Notably, Al-PMOF retained a remarkable regenerability of 96.5 % after five adsorption–regeneration cycles and maintained 85 % of its performance under 80 % relative humidity. Mechanistic study indicated that toluene adsorption was governed by physisorption through cooperative hydrogen bonding and π-π interactions. These findings highlight the potential of PMOFs, particularly Al-PMOF, as efficient and robust adsorbents for VOCs removal in real-world air purification applications.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Yunxuan Chen,Jun Nan,Hao Cui,Jianrui Li,Jie Liu
Magnetically enhanced coagulation currently faces dual constraints: limited organic removal efficiency (primarily occurring during rapid mixing despite improved collision efficiency) and insufficient understanding of magnetic floc/cake layer aging in ultrafiltration (UF) systems. Crucially, after obtaining highly effective control of membrane fouling, the reduced need for frequent backwashing invariably leads to heavy consolidation and prolonged accumulation of the cake layer. This study prepared four nanomagnetic seeds (Fe 3 O 4 , Fe 3 O 4 @SiO 2 (FS), Fe 3 O 4 @SiO 2 -NH 2 (FSN), MFe 3 O 4 @CS-g-PIA(MFCS)), demonstrating MFCS's superior organic removal capacity. Furthermore, during the slow stirring phase, sustained adsorption and complexation capabilities were exhibited by the coagulation process, particularly for aromatic proteins. The control of membrane fouling in combination with ultrafiltration also exhibited significant differences: the mechanism of cake layer formation was advanced with retainment of more tryptophan-like proteins. With respect to the aging problem, the flocs and cake layers formed by conventional polymeric alumina chloride primarily consist of amorphous Al(OH) 3 with low polymerization. Within 3 to 7 days, a substantial release of highly aromatic humic acid-like substances will occur, accompanied by a gradual increase in the release rate of all organic matter. This enhanced release is attributed to hydroxyl bridging reactions and recrystallization occurring during aging. Conversely, magnetic flocs or cake layers markedly suppress the release of all classes of organic compounds. Key factors underlying this suppression include a lower proportion of lattice oxygen, higher relative abundance of C-O/C=O functional groups, and the presence of abundant nanoscale Al(OH) 3cr . These compositional features enhance π-π and hydrophobic interactions and promote the formation of a hydrogen-bonding network which effectively constrains/immobilizes organic compounds. Molecular dynamics confirm MFCS aggregates' elevated binding affinity stems from both physicochemical bonding and reduced non-bonding (Coulombic/Lennard-Jones) interactions.
✓ 已验证
产品关联
DOI
高影响因子