CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xinbin Ji,Yulong Xiang,Jing Guo,Fucheng Guan,Da Bao,Qiang Yang,Zheng Li,Yihang Zhang,Xin Zhang,Jiahao He
The integration of early warning and thermal protection functions in fire-prone environments remains a significant challenge in the development of intelligent protective textile materials. In this study, a structural regulation strategy is proposed, leveraging the synergistic templating and stress-orientation effects of carbon nanotubes (CNT) and Ag 2 Se nanorods to successfully construct a polyimide (PI)/pre-oxidized polyacrylonitrile (panof)/CNT/Ag 2 Se composite porous fiber (PPCAF) featuring a stable sheath–core architecture. The core, composed of a dense panof/CNT/Ag 2 Se (s) phase, offers thermal responsiveness and mechanical support. The shell comprises a porous PI matrix that buffers stress, insulates heat, and prevents Ag 2 Se degradation and shedding, thereby enhancing thermal conversion and signal stability. This rational architecture enables the fiber to rapidly respond to fire-induced thermal stimuli, achieving a maximum thermoelectric voltage of 4.5 mV within 1.8 s via the Seebeck effect, ensuring stable self-powered fire warning. Concurrently, the fiber exhibits excellent passive protection, including high tensile strength (18.93 MPa), flame retardancy (LOI: 55.6 %), low thermal conductivity (0.0298 W/m·K), and superhydrophobicity (contact angle: 160.2°). These integrated properties contribute to slowing flame spread, minimizing heat transfer, and blocking moisture intrusion. This study provides both theoretical insights and practical guidelines for designing advanced self-powered intelligent textile materials with dual fire protection functionalities.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Huatao Sun,Huiyan Chen,Wuying Chen,Mingzhen Hu,Sha Chen,Yingjie Ma,Runjun Ou,Ding Li
In organic degradation, a prevalent perspective that biogenic manganese oxides possess enhanced catalytic ability compared to their chemical counterparts remains experimentally unvalidated. In this study, biogenic α-Mn 2 O 3 was proven to be superior to its chemogenic counterpart in atrazine degradation. In native degradation, biogenic α-Mn 2 O 3 achieved a 35.39–65.09 % degradation efficiency, while commercial α-Mn 2 O 3 showed no such ability. This is because biogenic α-Mn 2 O 3 generated greater amounts of reactive oxygen species than commercial α-Mn 2 O 3 (the contribution order for atrazine degradation was 1 O 2 > • OH >> O 2 •−) . In advanced oxidation, only periodate was efficiently activated by biogenic α-Mn 2 O 3 , achieving a 79.79 % degradation efficiency. Comparatively, the corresponding efficiency for commercial α-Mn 2 O 3 was 18.58 %. This discrepancy is due to the significantly higher levels of • OH and O 2 •− generation in the biogenic α-Mn 2 O 3 /periodate system (the contribution order was • OH > O 2 •− ). Importantly, the (332 ) and (222) crystal planes of biogenic α-Mn 2 O 3 exhibited a higher catalytic ability than the (211) plane in activating periodate to produce • OH and O 2 •− . The N(8)-C(10), C(17)-C(23), and N(9)-C(17) bonds in atrazine were susceptible to attack by • OH, while the C(3)-Cl(7) bond was liable to be attacked by O 2 •− , ultimately resulting in the formation of seven intermediates.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2025
·
IF 6.2
Peipei Meng,Qianya Zhou,Na Zhang,Lijuan Zhang,Liuchun Zheng
In this study, a green and sustainable synthesis strategy was developed to fabricate cellulose-based composite adsorbents by replacing the organic dispersion system previously used with an aqueous medium. Two inorganic fillers, sepiolite and TiO₂, were respectively incorporated to prepare cellulose-sepiolite (CgS(H₂O)) and cellulose-TiO₂ (CgT(H₂O)) composites, aiming to investigate the influence of mineral type and dispersion phase on Cd(II) adsorption performance and mechanism. Compared to the earlier reported CAT material synthesized in organic media, both aqueous-phase composites showed enhanced porosity, surface functionality, and carboxyl group distribution. CgS(H₂O) exhibited a fluffy, porous network structure with high micro/mesopore connectivity, achieving a maximum Cd(II) capacity of 239.45 mg/g. CgT(H₂O), with higher surface area and Ti–O active sites, demonstrated the highest capacity of 368.82 mg/g, significantly surpassing CAT (105 mg/g). Kinetic and isotherm analysis revealed that CgS(H₂O) followed multilayer chemisorption, while CgT(H₂O) conformed to monolayer Langmuir-type adsorption. Density functional theory (DFT) simulations further indicated stronger binding affinities and more active carboxyl-dominant sites in CgT(H₂O), while CgS(H₂O) benefited from networked carboxyl groups and Si–O-based interaction domains. These findings collectively highlight that the aqueous dispersion strategy, combined with targeted mineral selection, enhances not only environmental friendliness but also material structure and adsorption efficiency, offering a versatile platform for efficient heavy metal removal from water.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Qifang Zheng,Peilun Shen,Chao Su,Liuyang Dong,Dianwen Liu
The symbiotic relationship between pyrrhotite and chalcopyrite in the skarn-type and porphyry-type ore deposits is complex. This study investigated the adsorption properties and molecular dynamics simulation of calcium lignosulfonate (CL) as a selective depressant for the flotation separation of chalcopyrite and pyrrhotite. When the pH value of the slurry was 8, after adding 100 mg/L CL for reaction, the recovery of chalcopyrite was 91.44% and that of pyrrhotite was 9.25%. Furthermore, CL exhibited weak adsorption on the chalcopyrite surface, which minimal impacted its floatability. However, CL selectively adsorbed onto the pyrrhotite surface, further depressed sodium butyl xanthate adsorption. Notably, an island-like adsorption structure was observed on both sides of the gap on the pyrrhotite surface, accompanied by the characteristic ion signal enhancement of C 6 H 3 O – and FeOH + . In addition, CL promoted the stability of the water molecule layer at the solid-liquid interface of pyrrhotite, and the vertical distance of water molecules at the solid-liquid interface was reduced by 0.42 Å. It might be the coordination reaction between the carboxyl and hydroxyl groups of CL and the active iron sites on the surface of pyrrhotite, which leads to the formation of hydrophilic species mainly composed of FeOH + . Therefore, CL exhibits a strong depressive effect on pyrrhotite, enhancing the interfacial interaction force between water molecules and pyrrhotite, and successfully achieving the flotation separation of chalcopyrite and pyrrhotite.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Tianyi Li,Junxiu Piao,Dongliang Xu,Yuhui Meng,Lifu Zhang,Xu Han,Xiaoran Yang,Linze Jin,Sheng Bi
As high-energy-density power sources for electric vehicles and grid storage, lithium-ion batteries demand stringent thermal safety standards. However, thermal accumulation during fast charging and propagating thermal runaway (TR) cascades remain critical bottlenecks, where conventional phase change materials (PCMs) are difficult to balance the contradiction between heat dissipation and emergency thermal blocking. To address thermal accumulation and prevent TR propagation in lithium-ion battery modules, a tunable-thermal-conductivity phase change material (MF@MXene/PA) was synthesized. The MF@MXene/PA integrates paraffin (PA) within an MXene-reinforced melamine-formaldehyde resin (MF) porous matrix synthesized via hydrogen bond-directed in-situ self-assembly. Structural analyses confirmed that the incorporation of MXene could regulate the porous microstructure, and the optimal latent heat (157.01 J/g) and thermal conductivity (0.3754 W/m·K) were obtained at 2 mg/mL MXene. The porous structure in the MXene-MF framework provides strong capillary forces to adsorb PA. Meanwhile, under the synergistic effect of high temperature and air, the thermal conductivity of self-extinguishing MF@MXene reduced by 66.1 %, showed the thermal-triggered tunable thermal conductivity. In thermal management tests, the composite lowered peak temperatures by 11.2–23.1 % during 1C/2C cycling and maintained thermal homogeneity (<3 °C variation) by enhancing thermal conductivity. During the TR propagation, the composites delayed adjacent batteries ignition by 857 s and extended propagation intervals by 205–304 %, attributable to heat absorption of phase change and synergistic insulation from MXene-derived TiO₂. The dual functionality (heat dissipation and TR suppression), combined with self-extinguishing behavior, makes MF@MXene/PA a promising candidate for a safer battery thermal management system.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Advances
·
2025
·
IF 8
Jiayi Chen,Jijun Li,Yaqian Liu
Omnidirectional strain sensors are of paramount importance in the accurate detection of human movements. The mask printing technology is employed to fabricate an integrated omnidirectional flexible strain sensor for human motion monitoring. Silica particles were incorporated into the liquid metal to improve its rheological properties and enhance its patterning capability. The developed sensor exhibits excellent characteristics, including a wide strain sensing range (1–300 %), high sensitivity as evidenced by gauge factors ranging from 1.82 to 3.34 across its operational range, and excellent cyclic stability (more than 5000 cycles) with minimal signal degradation, ensuring reliable long-term monitoring. It is particularly noteworthy that the integrated flexible strain sensor can achieve real-time decoupling of both the magnitude and direction of the principal strain at the measurement point. The reliability of the sensor is verified by utilizing the specified strain magnitude and direction. This unique capability to resolve complex multi-axis deformation patterns provides higher accuracy than conventional unidirectional strain sensors and enables precise and intelligent identification of various human actions. The strain sensing platform has great application potential in fields such as health monitoring and rehabilitation medicine.
✓ 已验证
DOI
高影响因子
Russian Journal of Physical Chemistry A
·
2025
·Vol. 99
·期 10
·2506-2515
·
IF 0.8
Ang Yu,Dong Kaijie,Yang Zhaokun,Liu Qinze
Benefiting from dual functional group synergy of catechol and amino group, poly(phenol-amine) deliver satisfactory adsorption performance for Cr(VI). Considering strong chelating capability with Cr(VI) and high reactivity of thiol group, this work goes beyond dual functional group synergy between catechol and amino group, and demonstrates triple functional group cooperation among catechol, amino group, and sulfur. A sulfur-containing poly(phenol-amine) was fabricated through simple oxidative polymerization between catechol and cysteamine. The effects of different parameters including solution pH, adsorption time, Cr(VI) initial concentration, temperature, and coexistence of other ions on adsorption performance were studied in detail. Kinetic models, isothermal models, and intra particle diffusion model were used to fitting adsorption process. Benefited from triple functional group cooperation among catechol, amino group, and sulfur, as-prepared sulfur-containing poly(phenol-amine) deliver maximum adsorption capacity of 327.89 mg/g for Cr(VI), which is higher than that of recently reported poly(phenol-amine) adsorbents. Additionally, as-prepared sulfur-containing poly(phenol-amine) exhibit good recoverability, and competitive adsorption performance in the presence of coexisting ions. This work would provide an important inspiration for future construction of poly(phenol-amine) adsorbent.
✓ 已验证
产品关联
DOI
高影响因子
Environmental Science-Nano
·
2025
·
IF 5.1
Yuanzhang Hou,Yange Wang,Yuchen Tang,Yuping Qiu
Nanoplastics (NPs) critically regulate organic pollutant (OP) transport in seawater-saturated porous media through adsorption-driven carrier mechanisms. This study quantifies distinctions between carrier-mediated and non-carried transport pathways by analyzing OP mobility with increasing polarities: nonpolar phenanthrene (PHE), moderately polar triclosan (TCS), and highly polar ibuprofen (IBU), across NPs of varying sizes (300–800 nm) and OPs. In single-component systems, 300 nm NPs (NP300) exhibited a lower effluent-to-influent mass ratio (Meff = 30.83%) compared to PHE (54.25%), TCS (69.26%), and IBU (99.76%). In binary systems, NP300 reduced PHE, TCS, and IBU by 23.55%, 21.72%, and 12.12%, respectively, correlating with their equilibrium adsorption percentages (θt,eq): 85.59% (PHE), 48.96% (TCS), and 4.87% (IBU). Carrier contribution (δ) was the highest for PHE (80.75%), followed by TCS (40.02%) and IBU (4.50%), confirming hydrophobic adsorption as the dominant suppression mechanism for nonpolar OPs. In contrast, IBU's mobility remained non-carrier-dominated due to minimal adsorption and strong electrostatic repulsion. Larger NPs had weaker inhibitory effects: NP500 and NP800 reduced PHE mobility by only 16.62% and 5.54%, respectively, as θt,eq declined (60.22% and 30.14%) and NP–OP mobility converged. A predictive model integrating NP migration and adsorption achieved <3% deviation for carried mobility of nonpolar and moderately polar OPs, validating adsorption-driven suppression. These findings establish a quantitative framework to assess NPs as dynamic pollutant sinks in sandy coastal sediments, providing critical insights for managing contamination risks in marine ecosystems dominated by permeable sandy substrates.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Xingguo Zhou,Bin Zou,Qinghua Chen,Gongxian Yang,Qingguo Lai,Xinfeng Wang
Micropatterns with bionic properties influence cellular behavior through mechanotransduction, a process that plays a crucial role in promoting bone repair. However, bone regeneration is a complicated physiological process that involves multiple cell types and mechanisms. In the early stages of bone restoration, micropatterned surfaces on bone implants can prematurely promote osteogenic differentiation. This premature differentiation is detrimental to the accumulation of initial cell numbers, ultimately delaying both bone growth and overall bone accumulation. In light of this, the fabrication of thermally stimulated polyurethane with exceptional shape memory properties enabled dynamic response of the micropatterned interfaces, enabling precise switching between proliferation and differentiation phases for enhanced osseointegration. Furthermore, cell proliferation and ALP activity assays of MC3T3-E1 were used to assess the osteoinductive effects of shape memory polyurethane. The results demonstrated that the temporary flat interface of the smart dynamic membrane effectively promoted cell proliferation, while the responsive microstructure significantly improved early osteogenic differentiation compared to the static micropatterned membrane.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Hang-Jie Cai,Ming-Yuan Gao,Meng-Wei Guo,Rong-Rong Deng,Yan Li,Juan-Jian Ru,Yi-Xin Hua,Qi-Bo Zhang,Cun-Ying Xu
Zn alloy engineering has emerged as a promising anodic strategy for aqueous Zn-ion batteries (AZIBs), effectively suppressing side reactions and dendritic growth. However, the impact of multiphase alloy compositions on zinc deposition and overall battery stability remains insufficiently understood. In this study, a versatile deep eutectic solvent (DES) was employed as both the electrolyte and the reaction medium for multiphase alloy formation. Hierarchically porous Cu-Zn multiphase alloys were fabricated on a three-dimensional (3D) Cu foam substrate (Cu-Zn/CF) via electrochemical deposition, with precise control over alloy composition achieved by adjusting deposition parameters. The synergistic interactions among Cu-Zn alloying elements significantly enhance the hydrogen evolution overpotential, reduce corrosion current, and effectively suppress Zn dendrite formation during repeated cycling. Furthermore, the combination of Cu-Zn alloys with the 3D Cu foam architecture facilitates highly reversible zinc plating and stripping processes. Consequently, the Cu-Zn/CF anode demonstrates exceptional cycling stability, maintaining performance for over 4000 h at 0.5 mA·cm −2 (0.5 mAh·cm −2 ). Notably, the anode retains excellent cycling stability with minimal polarization and an average Coulombic efficiency of 99% even under rigorous operating conditions. This work not only clarifies the functional roles of alloying components but also presents a novel strategy for the development of stable, dendrite-free zinc metal anodes.
✓ 已验证
产品关联
DOI
高影响因子
CONSTRUCTION AND BUILDING MATERIALS
·
2025
·
IF 8
Xiaohua Li,Xiujian Xia,Susu Xing,Yongxu Xie,Rongyao Chen,Miaomiao Hu,Jintang Guo
Excessive heat release during cement hydration in deepwater cementing operations can readily cause thermal decomposition of natural gas hydrates, leading to gas blowout incidents that compromise cementing quality. Incorporating phase change materials (PCMs) into deepwater cementing slurry systems effectively addresses this issue by regulating hydration temperatures. However, traditional PCMs suffer from insufficient mechanical strength and poor interfacial compatibility, leading to severe deterioration of cement mechanical properties. This study prepared nanoscale hybrid shell phase change microcapsules (MS@EPNS) with high-strength three-dimensional network structures. Silica nanoparticles were innovatively generated in-situ on the epoxy shell surface through a molecular bridging strategy to form crosslinks. Compared with epoxy shell microcapsules, MS@EPNS showed significantly enhanced mechanical strength (Young's modulus 4.13 GPa), thermal storage performance (186.6 J/g), and thermal stability. Results demonstrate that MS@EPNS exhibits excellent thermal regulation capability. The addition of 7 % MS@EPNS reduced hydration induction time by 6 %, while decreasing hydration temperature by 9.2°C. Qualitative and quantitative analyses revealed that MS@EPNS could induce preferential growth of calcium silicate hydrate on its surface, achieving secondary encapsulation of the microcapsules and significantly enhancing interfacial bonding strength, ultimately forming composite cement materials with low porosity and high strength. The cement stone containing 5 % MS@EPNS exhibited compressive strength increases of 27 % and 26.8 % after 3 days of curing at 20°C and 10°C, respectively. The prepared microcapsules successfully achieved synergistic optimization of mechanical properties and thermal regulation functions in cement composites, providing new insights for the development of high-performance deepwater cementing slurry systems.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Materials and Technologies
·
2025
·
IF 9.2
Xianjin Qi,Guizhi Yan,Boyu Du,Mengmeng Wang,Yongkui Li
Arsenic (As) contamination is a global problem that requires innovative remediation, this study successfully synthesized a novel MnFe 2 O 4 -Zn/Co ZIFs@MIL-53(Fe) (MFZM) using a solvent method to remove As(V) from contaminated water. The MFZM exhibited a rhomboidal dodecahedron structure with a high specific surface area of 158.93 m 2 /g, which contributed to its exceptional adsorption performance under both acidic and neutral pH conditions. Notably, the adsorption capacity for As(V) reached approximately 599.90 mg/g at an equilibrium concentration of 500 mg/L, surpassing the performance of several previously reported adsorbents. The kinetic modelling results indicated that the adsorption process followed a pseudo-second-order mechanism, suggesting chemisorption as the dominant process. However, the isotherm studies demonstrate favorable single-layer adsorption, with the Langmuir model providing the best fit for the experimental data. The X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) analysis revealed that the Fe/Mn/Co on the MFZM surface can hydrolyze and generate Fe/Mn/Co-OH groups under pH conditions ranging from 3 to 7, facilitating the formation of stable coordination complexes with As(V). Furthermore, the MFZM provided abundant positively charged adsorption sites that effectively attracted HAsO 4 2− via electrostatic interactions, leading to efficient As(V) removal. These findings underscore the potential of the MFZM as a promising adsorbent for the effective remediation of As-contaminated wastewater, supporting sustainable environmental management.
✓ 已验证
产品关联
DOI
高影响因子