BIOSENSORS & BIOELECTRONICS
·
2025
·
IF 10.5
Hui Li,Chuang Jiang,Wanqi Jiang,Yuqing Zhang,Xiyao Liang,Yingying Feng,Yingnan Liu
To overcome the limitations of conventional enzymatic glyphosate (Glyp) detection methods, including enzyme environmental sensitivity, high cost, and limited enzyme sources, this study developed a portable paper-based fluorescence platform (Y-R membrane) based on a metal-organic framework (MOF)-driven fluorescence regulation mechanism for non-enzymatic and rapid detection of Glyp. This platform was constructed by immobilizing MnMOF and yellow carbon dots (Y-CDs) on a polyvinylidene fluoride membrane. The ZrOx-OH derived from alkaline-treated UiO-66 regulated the Mn 3+ /Mn 2+ redox reactions through its surface hydroxyl groups, triggering the red fluorescence of MnMOF. Glyp detection was achieved via competitive binding of its carboxyl groups to ZrOx-OH hydroxyls, inhibiting the redox process and inducing concentration-dependent fluorescence quenching. Coupled with RGB analysis, this platform exhibited excellent linearity (R 2 = 0.993) within 0.1–100 μg/mL range, with a detection limit of 0.06 μg/mL. The standard addition experiments demonstrated Glyp detection recoveries of 96.0 %∼103.4 % in tea samples, completing detection within 15 min. This platform enabled rapid, accurate and visual screening of Glyp residues without needing enzymatic reactions or sophisticated instruments. With its advantages of operational simplicity, cost-effectiveness, and intuitive readout, this system offered a novel competitive reaction-based sensing strategy for on-site rapid screening of Glyp in agricultural products.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2025
·
IF 19
Dongli Li,Yinan Dong,Hua Zhang,Dagang Liu,Zhituo Geng,Chenxi Li,Hao Li,Jiayao Zhou,Zhipeng Li,Hai Lin,Weitian Zhang,Shengze Yu,Shuyan Yu,Congju Li,Yongping Huang,Jingkun Jiang,Zehui Li
Nitrogen oxides (NO x ) monitoring requires sensor platforms that deliver ppb-level sensitivity, ambient-temperature operation, and molecular discrimination. However, rapid and selective NO x detection at room temperature remains elusive. Although 2D transition metal carbides/nitrides (MXenes) show promise in chemiresistive sensing, their susceptibility to ambient degradation and poor selectivity limit practical deployment. Here, a room-temperature NO x sensor is developed by epitaxially growing Hofmann-type metal–organic frameworks (Ni-pyz) on oxygen-terminated monolayer large-size MXene (Ti 3 C 2 T x ). The Ni-pyz/Ti 3 C 2 T x heterostructure exhibits enhanced sensitivity (4.8 and 5.5 times compared to Ti 3 C 2 T x ) and low detection limits (8.8 and 6.9 ppb) for NO and NO 2 , along with high selectivity and good stability (>85% response after 8 weeks). The enhanced sensitivity results from electronic coupling between the Ti 3 C 2 T x and Ni(CN) 4 , promoting charge transfer with NO x . The improved selectivity arises from the pore confinement effect of Ni-pyz and the specific adsorption of NO x through Lewis acid-base interactions with open Ni sites. Importantly, the dynamic response of Ni-pyz/Ti 3 C 2 T x closely mirrors that of a trace-level chemiluminescence NO x analyzer at low NO x concentrations, enabling high-temporal-resolution, long-term atmospheric monitoring. This functional strategy overcomes the insufficiency of MXene-based gas sensors, paving the way for the development of high-performance sensors.
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2025
·
IF 7.3
Chenkai Xu,Yujie Yuan,Valeryia Kasneryk,Maria Serdechnova,Carsten Blawert,Yuankun Wei,Dongmei Zeng,Mengke Wang,Dahai Gao,Hao Wang,Mikhail L. Zheludkevich,You Zhang
Corrosion protection of high-strength aluminum alloys remains a critical challenge, especially for applications in marine and aerospace environments. This work reports BIPT-6, a new cerium-based metal-organic framework designed for sustainable corrosion protection of AA2024 aluminum alloy. BIPT-6 contains both Ce(III) and Ce(IV) ions and is constructed with 2,5-furandicarboxylate (FDA 2− ), a biomass-derived ligand, through a simple one-pot solvothermal method. The structure and composition were verified by a series of advanced characterization methods. BIPT-6 crystallizes in a monoclinic system with space group P 2 1/ n . The protective ability of novel BIPT-6 was evaluated by electrochemical impedance spectroscopy (EIS). It demonstrated good corrosion inhibition efficiency for the AA2024 aluminum alloy samples immersed in 0.05 mol/L NaCl solution containing 5 × 10 −4 mol/L BIPT-6. Finally, BIPT-6 was applied as an additive to epoxy resin to prepare anti-corrosive coatings. The EIS results show that BIPT-6@Epoxy coating system provides a superior corrosion protection and stability to aluminum alloy AA2024 compared to blank coating. The corrosion inhibition mechanism of BIPT-6 was also investigated, highlighting its synergistic effect from dual corrosion inhibitors. This work showcased BIPT-6 as a promising approach for sustainable, smart corrosion protection strategies in aluminum alloys.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Guoli Chen,Ji-Na Hao,Yongsheng Li
5-Methylcytosine (5-mC), as one of the primary forms of DNA methylation, plays essential roles in a variety of biological activities. Its rapid and precise detection is therefore paramount for abnormal DNA methylation assessment, but still remains challenging. Herein, a highly luminescent and stable lanthanide-based metal-organic framework (MOF) probe, namely Eu-ZrMOF, is firstly designed for qualitative and quantitative analysis of 5-mC, wherein the organic building units of 1,3,5-benzenetricarboxylic acid (BTC) serve as both the energy donors and recognition molecules, and the modified Eu 3+ ions function as intense signal reporters. Significantly, the luminescence of the fabricated Eu-ZrMOF probe can be remarkably quenched by 5-mC via its inner filter effect on the BTC absorption, achieving high response to 5-mC in a very short time (20 s). Moreover, such an efficient, instantaneous response probe presents excellent specificity towards 5-mC among various coexisting species in urine, and high sensitivity with a linear detection range of 0–200 μM and limit of detection (LOD) of 0.18 μM, thereby enabling it to be applied in accurately quantifying 5-mC content in real urine samples with high recoveries (95.5–98.5 %) and low relative standard deviations (< 2.5 %). This study demonstrates a simple, fast and effective approach for sensitive identification of urinary 5-mC, prefiguring its great potential for the assessment of DNA methylation associated with genetic diseases and tumors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD COMPOSITION AND ANALYSIS
·
2025
·
IF 4.6
Yuxia Zhang,Zitong Yang,Jingyu Deng,Yili Zhang,Hongzhen Li,Chen Li,Wenyuan Xu,Zhaohui Hou,Binbin Zhou
The current study aimed to present a molecularly imprinted electrochemical sensing platform for bisphenol A (BPA) detection by synergistically combining conductive RGO-PANI hybrids with porous CoNi-MOF. The RGO-PANI network facilitated electron transfer efficiency, while the porosity of CoNi-MOF enhanced molecular recognition capacity through expanded surface area and tailored recognition cavities. The conditions affecting the determination of BPA were also optimized. A linear increase of the current signal was observed in the concentration range of 1–500 nM BPA. The corresponding detection limit was calculated to be 0.36 nM. Selectivity tests showed good adsorption to BPA, which was attributed to the specificity of the MIP film. Practical validation recoveries of 95.12–103.18 % (RSD<3.6 %) were achieved in milk samples, demonstrating reliability in complex matrices. This study balanced sensitivity and cost-effectiveness compared to other sensors. This sensor provided a viable method for environmental and food safety monitoring.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Membranes
·
2025
·
IF 9.5
Hongbin Wang,Caiyan Zhang,Lili Fan,Zixi Kang,Daofeng Sun
Metal-organic framework glasses (MOF-a g ), formed through melt-quenching crystalline MOFs, have emerged as promising membrane materials owing to their processability and retained porosity. While MOF-a g membranes exhibit exceptional sieving selectivity, their compromised permeability has driven the development of crystal-glass composite (CGC) membranes, where crystalline porous fillers are embedded in MOF-a g matrices. Nevertheless, the high-temperature melt-quenching process poses a significant challenge to the thermal stability of porous fillers, inducing structural degradation of thermally labile fillers and severely compromising gas permeability. In this study, we report the rational design of FAU-type zeolite-embedded ZIF-62-a g composite membranes to improve hydrogen separation performance. The optimized 20-FAU-ZIF-62-a g CGC membrane (20 wt% zeolite filler loading) exhibits the H 2 permeability of 2516 Barrer and H 2 /CH 4 selectivity of 52.4 for single-gas permeation, representing 179% and 45% improvements over the pristine ZIF-62-a g membrane. The zeolite incorporation not only improves porosity but also enhances mechanical strength, evidenced by the enhanced Young’s modulus (85%) and hardness (55%). Further processing with an alternative zeolite filler (MFI-type zeolite) or an alternative MOF-a g matrix (TIF-4) validates the universality of zeolite-MOF-a g CGC membranes in improving performance. This study provides a versatile platform for fabricating robust MOF-a g -based membranes with improved separation performance.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jiajie Zhang,Yilei Fang,Mengyu Tang,Xu Wu,Xin Yu,Ranwen Ou
Mercury (Hg) is a highly toxic and bioaccumulative heavy metal, the chemical-free regeneration of Hg(II) adsorbent is in great demand but remains a challenge, due to the strong binding between Hg(II) and adsorption sites. In this study, a thermally regenerable composites, PDEA-MOF-808, was synthesized by encapsulating the thermo-responsive polymer poly N-[2-(Diethylamino)ethyl]acrylamide (PDEAEAM) within a porous metal-organic framework (MOF-808). The amide and amine functional groups in PDEAEAM, especially the tertiary amine moieties, played key roles in Hg(II) adsorption, achieving a high capacity of 497.5 mg g −1 and rapid equilibrium within 20 min. The composite also exhibited exceptional selectivity (K d = 3.3 × 10 5 mL g −1 ), leading to high Hg(II) removal efficiencies of over 99.5 % when treating industrial wastewater and natural water. Furthermore, it was efficiently regenerated in warm water at 55 °C within 20 min, maintaining 91.3 % efficiency after ten adsorption-desorption cycles, presenting good reusability and stability. The excellent Hg(II) adsorption performance was attributed to ligand chelation between oxygen- and nitrogen-containing functional groups. This work highlights a sustainable, chemical-free strategy for heavy metal removal and offers a promising approach for developing high-performance, regenerable adsorbent for water treatment applications.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2025
·
IF 6.1
Jian Shi,Hongren Wang,Runcheng Liu,Jie Yan,Mingshun Jiang,Yuanze Xu,Zezheng Zhang,Haipeng Si,Sen Wang,Shouzhen Jiang
Metal-organic frameworks (MOFs), known for their high porosity and tunable properties, have attracted significant interest in enhancing the sensitivity and functionality of plasmonic optoelectronic devices. However, their application in surface plasmon resonance (SPR) fiber-optic sensors remains challenging due to difficulties in preparing and transfer of large-area two-dimensional (2D) MOFs. Here, a large-area continuous ultrathin MOF film was successfully fabricated using an interfacial synthesis strategy and seamlessly adhered to tilted fiber Bragg gratings (TFBG). The resulting 2D MOF film not only exhibited excellent optoelectronic properties, thereby enhancing the plasmonic response in the sensing region, but also, due to its exceptionally high specific surface area, facilitated molecular enrichment within the effective sensing region. Subsequently, gold nanoparticles (AuNPs) were uniformly grown in situ on the 2D MOF films, leveraging the localized surface plasmon resonance (LSPR) effect of AuNPs to amplify the sensing signal, which significantly improved the sensor's performance for trace analysis. Concurrently, the AuNPs and the MOF-constructed nanozymes facilitated ultrasensitive glucose detection through a cascade catalytic reaction, obviating the need for additional receptors. The prepared sensor demonstrates excellent detection capabilities for glucose and DNA molecules in complex biological samples, such as serum. It exhibits strong performance in stability, reproducibility, and scalability, and holds potential for transformation in industrial testing applications. This design fully leverages the synergistic effects among diverse materials, enhancing the sensor's detection capabilities and providing valuable insights for the development of next-generation sensors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Materials Interfaces
·
2025
·Vol. 12
·期 15
·e00421
·
IF 4.4
Hengyu Pan,Lingmei Zhu,Huijie Wei,Chang Gao,Maolin Zhou,Tiance Zhang,Qiang Luo,Boyang Tian,Jianhua Wang,Yongping Hou,Yongmei Zheng
A bioinspired spider silk fiber (i.e., PCLC) is presented by introducing the zwitterionic hydrogel poly-[2-(methacryloyloxy)ethyl] dimethyl-(3-sulfopropyl)ammonium hydroxide (PDMAPS) and CAU-10-H used as carriers of hygroscopic salt Lithium chloride (LiCl), and the addition of carbon black (CB) nanoparticles makes the prepared fibers have photothermal effect. PCLC fiber achieves the moisture absorption capacity of ≈1.49 – 1.99 g g −1 after 2 h adsorption at ≈40% relative humidity (RH). The temperature of a single PCLC knot can rise to 46.4 °C for ≈3600 s, and the temperature of a batch of PCLC spider knot fibers can rise to 112.1 °C for ≈3600 s (under ≈1 sun illumination), which has excellent photothermal effect. Water collection is conducted for five consecutive days with a daily collected amount of ≈1.87 g g −1 . The PCLC fiber shows good water vapor adsorption reversibility after 10 consecutive adsorption-desorption cycles, the moisture absorption can be stabilized at ≈1.9 g g −1 , and the water vapor desorption capacity reaches ≈1.73 g g −1 (under ≈1 sun illumination, exhibiting water vapor desorption efficiency of ≈92.1%).
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Yuan Li,Shaoqian Jia,Ling-Xin Kong,Xiaotian Guo,Xinyi Lin,Dae Joon Kang,Huan Pang,Feng Yu
Accurate detection of nitrite plays a vital role in public health because excessive intake poses serious health risks. Metal-organic frameworks (MOFs) and their derivatives have emerged as a promising platforms for nitrite detection due to their adjustable structures and functionalization capabilities. In this study, we synthesized Ag/Cu-BTC by doping silver ions during Cu-BTC synthesis, followed by high-temperature carbonization to produce carbon-supported Ag-Cu bimetallic nanoparticles (Ag/Cu@C) for effective nitrite sensing. The carbon framework from MOF precursors not only enhances electrical conductivity and stability but also prevents nanoparticle aggregation. Silver addition enhances electron transfer efficiency and alters the electronic structure through synergistic interactions with copper, resulting in increased catalytic activity. The optimized Ag/Cu@C composite shows excellent sensing performance with a detection limit of 50 nM, high sensitivity (855.32 μA mM −1 cm −2 ), and a wide linear response range (0.2–10,000 μM). The sensor maintains 98.5–103.2 % recovery against 10-fold concentrations of common interferents (Cl - , NO 3 - , SO 4 2- , glucose), and retains 92.3 % initial current after 28 days, demonstrating exceptional selectivity and operational stability. These features highlight its significant potential for practical applications in environmental monitoring and food safety testing.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Dehao Jia,Luyang lv,Weijia Sun,Tian Tian,Binnan Shi,Nuo Zhang,Lei Yang,Qin Wei
CA15–3 serves as a tumor marker for breast cancer, and its sensitive detection is crucial for monitoring the disease and managing its treatment. In this study, an electrochemiluminescence (ECL) sensor for the detection of CA15–3 was prepared by using zirconium metal-organic frameworks (Zr-TCBPE) as an ECL emitter and Pt and Pb nanoparticles grown on graphene (rGO-PtPd) as substrate materials. The formation of a ligand bond between the 1,1,2,2-tetra(4-carboxylbiphenyl) ethylene (H 4 TCBPE) and Zr restricted the intramolecular motion of H 4 TCBPE, thereby suppressing nonradiative transitions and triggering a strong coordination-induced ECL enhancement effect. Simultaneous low-potential oxidation using N 2 H 4 as a co-reactant further significantly enhanced the ECL intensity. This method exhibited a wide detection range of 0.1 mU/mL to 500 U/mL, with a detection limit of 0.026 mU/mL. It demonstrated high accuracy and satisfactory reproducibility, indicating that the coordination-induced ECL sensing approach was highly promising for the analysis of disease biomarkers.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2025
·
IF 6.7
Xiaotong Song,Junyuan Zhang,Weiqi Li,Huanying Li,Zhiguo Li,Xiaolong Xu,Changyu Liu,Jianbo Jia
Metal-organic framework (MOF)-derived carbon nanocomposites have been widely applied in electrocatalytic fields due to their simple synthesis, excellent conductivity, and high catalytic activity. In this study, ZIF-67 and MIL-101(Fe) were synthesized via liquid-phase precipitation and solvent thermal methods, respectively. Then, the two kinds of MOFs were ground and calcined with melamine to prepare flower-like carbon nanocomposites. Under the optimal conditions, the oxygen reduction reaction (ORR) onset potential (E onset = 1.019 V vs. reversible hydrogen electrode, RHE) and half-wave potential (E 1/2 = 0.866 V) of this prepared composite are both higher than those of commercial Pt/C catalyst (E onset = 0.971 V, E 1/2 = 0.838 V). The prepared nanocomposite exhibits a lower oxygen evolution reaction (OER) overpotential (η = 338 mV at 10 mA cm −2 ) than RuO 2 (η = 372 mV), demonstrating superior catalytic performance. The prepared nanocomposite achieves simultaneous enhancement in both ORR and OER bifunctional catalytic performances. The power density of a zinc-air battery (ZAB) assembled with the optimal nanocomposite was 2.65 times higher than that of the Pt/C + RuO 2 system. This study establishes a fundamental framework for the rational design of high-performance ORR/OER bifunctional catalysts, while pioneering new avenues for ZAB technology commercialization.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）