ChemCatChem
·
2025
·
IF 3.9
Wenhao Zhang,Liang Shen,Fayang Zhou,Xinyu Cao,Jiacheng Chen,Sheng Dai,Jing Xu,Minghui Zhu
Understanding the role of support is of guiding significance for studying the structure–activity relationship of supported Ni-based catalysts. In this work, catalysts with 0.1, 1, and 10 wt.% of NiO supported on CeO 2 , ZrO 2 , TiO 2 , and Al 2 O 3 were prepared by the impregnation method. The catalytic performance of CO 2 methanation was correlated with Ni particle size, reducibility, and basicity. The activity of the catalyst was found to be positively correlated with both the Ni particle size and reducibility, which promote the hydrogen dissociation and CO 2 activation processes, respectively. However, the basicity of the catalyst does not seem to be related to the reaction activity. Moreover, the coexistence of formate and the associative mechanism over the catalysts was evidenced. Graphical This work reveals that in CO 2 methanation over supported Ni catalysts, catalytic activity correlates positively with Ni particle size and reducibility, enhancing H 2 dissociation and CO 2 activation, respectively, but not with basicity. The coexistence of formate and associative mechanisms is confirmed over nickel-based catalysts in this work.
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2025
·Vol. 10
·期 41
·e04164
·
IF 2
Yanjun Li,Jingwen Shen,Ruina Bian
In this study, a novel composite sponge composed of konjac glucomannan (KGM) and silk fibroin (SF) was fabricated, with citric acid (CA) employed as a crosslinker and silver nanoparticles (Ag NPs) incorporated to enhance antimicrobial performance. Through CA-mediated crosslinking and freeze-drying, an interpenetrating porous structure was generated, leading to significant improvements in mechanical integrity and structural stability. Optimization of the ratios of KGM, SF, and CA resulted in strengthened intermolecular interactions, which contributed to superior water absorption, retention capacity, rheological behavior, and antibacterial activity. The incorporation of Ag NPs endowed the composite with strong bacteriostatic properties, while in vitro cytocompatibility assays confirmed favorable biocompatibility. Moreover, in vivo wound healing and ex vivo hemostasis studies in animal models demonstrated enhanced tissue regeneration and effective hemostatic capability. In conclusion, these results indicate that the KGM/SF/Ag NPs composite sponge possesses considerable potential as a multifunctional wound dressing for clinical application. Graphical In this study, a novel composite sponge composed of konjac glucomannan (KGM) and sericin (SF) was utilized, with citric acid (CA) serving as the crosslinking agent. Its excellent properties were demonstrated through characterization methods including UV-Vis, FT-IR, XRD, and SEM. Notably, the incorporation of silver nanoparticles (Ag NPs) significantly enhanced the antimicrobial properties. The prepared sponge also demonstrated the ability to promote wound healing and angiogenesis.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Wenchao Niu,Jing Li,Jia Wang,Yujie Li
Single-crystalline Ni-rich LiNixMnyCo1–x–yO2 (SNCM, x ≥ 0.8) materials are regarded as next-generation cathodes for lithium-ion batteries. However, SNCM cathodes show readily low structural stability due to surface reconstruction and irreversible strain evolution during cycling at high voltages. Here, we demonstrate that Y2O3 material incorporated into SNCM cathodes forms an epitaxial entropy-assisted surface layer, which acts as a highly compatible region to facilitate Li-ion transmission, suppress interface reaction and transition metal dissolution. Meanwhile, soluble Al ions are uniformly distributed in the SNCM lattice and combine with the surface Y–O bond, forming a pillaring effect to restrain irreversible strain evolution, eventually prevent the formation of gliding and nanocracks during high-voltage cycling. As a result, the SNCM cathode with a Y2O3 surface and Al doping shows a high specific discharge capacity of 210.5 mAh·g–1 at 1 C within 2.75–4.4 V and a capacity retention of 86.6% after 100 cycles. This study offers a new insight into the design of a strain-retardant method for obtaining single-crystalline Ni-rich cathode materials with high performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small Methods
·
2025
·Vol. 9
·期 7
·2401135
·
IF 9.1
Fang Wang,Shi Cheng,Xuyang Wang,Chunlin Song,Jiangyu Li,Hongyun Jin,Boyuan Huang
Solid-state electrolytes (SSEs) with high ionic conductivity are crucial for the development of high-performance all-solid-state batteries. While a growing number of strategies based on nanoengineering are emerging to enhance the ionic conductivity of SSEs, understanding nanoscale ionic transport remains a nontrivial challenge. In this work, a simple yet effective approach is developed for in situ measuring microscopic ionic velocity in SSEs. Ionic transport under an electric field is directly captured using spatial-temporal scanning Kelvin probe microscopy (SKPM). This method reliably quantifies the microscopic ionic conductivity of SSEs, consistent with the results of macroscopic electrochemical impedance spectra, while providing nanoscale spatial resolution that is essential for comprehending ionic migration in nanostructured systems. The spatial-temporal SKPM, validated on LiZr 2 (PO 4 ) 3 and Li 1.05 Zr 1.95 Fe 0.05 (PO 4 ) 3 , can be further extended to other SSEs for direct visualization of ionic migration dynamics. This work contributes to the understanding of ionic transport mechanisms and paves the way for advancements in the ionic conductivity of SSEs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Zhaorui Zhang,Hongyun Qiu,Shuai Wen,Yongwei Yang,Xuan Ye,Yahui Zhao,Tongtong Li,Ruipeng Zhang,Shaobo Ji
With the rapid development of flexible sensors in healthcare monitoring and human–machine interactions, traditional materials face challenges such as poor breathability and sweat accumulation, resulting in signal distortion and wearing discomfort. Developing breathable sensors is the main solution to address these issues. Here, breathable porous polydimethylsiloxane (pPDMS)/polyacrylonitrile (PAN) films with a Janus structure were fabricated through electrospinning and selective dissolution. The films possessed asymmetric wettability with hydrophilic PAN fiber layers and hydrophobic pPDMS layers, which had a unique rough-surface continuous network structure. These Janus films exhibited excellent breathability and directional water transport, enabling “breathability” for the fabricated sensors. Unprecedentedly, the fiber-to-continuous network transformation in pPDMS layers enhanced the surface metal adhesion after gold deposition and significantly improved their conductivity, stability, electrical stretchability, and durability as flexible sensors. When collecting physiological signals, these sensors demonstrated effective sweat-draining and breathability with improved signal stability. This work provides a solution for fabricating porous, breathable PDMS-based films and sensors, expanding material choices for next-generation smart textiles.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2025
·Vol. 21
·期 32
·2503471
·
IF 12.1
Rui Du,Changcheng Liu,Que Huang,Shengnan He,Chao Zheng,Li Guo,Yanjun Chen
For Na 3 V 2 (PO 4 ) 3 (NVP) cathode, the activity and utilization rate of Na and V is the key to affecting its electrochemical properties. However, few studies can simultaneously optimize both. Currently, a facile hydrothermal route is proposed to successfully synthesize the honeycomb-like porous NVP@CHSLS cathodes possessing anchoring effects to enhance the immobilization of active Na/V through in situ carbonation with chitosan and sodium lignosulfonate. DFT calculations demonstrate the N/S co-doped carbon skeleton gains more electrons and behaves with superior charge transfer capability. Accordingly, XAFS verifies the existence of hypervalent V 4+ for the charge balance, as well as a newly generated C-N-V bond inside the bulk, which significantly inhibits the dissolution of V in the electrolyte. Moreover, ex-situ and after-cycled XRD verifies beneficial electrochemical intermediums such as Na 2 S manifest extra sodium fixation characteristics, which not only enter into the CEI membrane to reduce the loss of Na + , but also participate in the de-intercalation of Na + . Furthermore, honeycomb-like porous morphology enriches the active sites for Na + migration and improves the wettability of electrolytes, demonstrated by contact Angle and AFM tests. Consequently, the optimized NVP@CHSLS-2 reveals a high postactivated capacity of 104.5 mAh g −1 at 60 C, and it remains at 98.8% after 10 000 cycles at 60 C.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2025
·
IF 5.5
Yuanbo Han,Yuanchuan Li,Yuqin Huang,De Li,Yu Wu,Wenting Ji,Yong Chen
As a well-known two-phase material, spinel Li4Ti5O12 has been widely studied and commercially applied in lithium-ion batteries, and its zero-strain phase transition derives some unique electrochemical phenomena such as memory effect and electrochemical oscillation. Due to the same spinel structure and redox element, the spinel LiCrTiO4 presents similar electrochemical properties including memory effect and electrochemical oscillation. However, electrochemical oscillation has not yet been observed during the discharge process of LiCrTiO4. In this study, spinel LiCrTiO4 was prepared by spray-drying in a vertical tube furnace and then sintered at a high temperature, which exhibits electrochemical oscillation during both charging and discharging. According to XPS, TEM, NMR, and in-situ XRD results, the nonstoichiometric Li1–xCr1–yTiO4 (x, y = 0.2, 0.1, and 0) samples possess a good spinel structure with partial Li ions at 16d sites and take a reversible two-phase transition between the spinel and rock-salt structures. In addition, a schematic diagram is proposed to interpret the electrochemical oscillation of LiCrTiO4, in which the nucleation and phase transition processes play the rate-determining step alternatively. Therefore, it is the first time the electrochemical oscillation is achieved during both charge and discharge of LiCrTiO4, and an alternative rate-determining step is proposed to elucidate the electrochemical oscillation, which offers an original perspective for understanding two-phase reactions and their derivative phenomena in lithium-ion batteries.
✓ 已验证
DOI
高影响因子
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
·
2025
·Vol. 40
·期 5
·1504-1513
·
IF 1.1
Wang Yu,Yan Lisi,Cheng Bo,Yang Jing,Li Binbin,Wang Xinyu
To improve the controlled release ability, we prepared attapulgite into microspheres by spray drying. This research began with a thorough thermogravimetric analysis to optimize attapulgite’s heat treatment for drug loading. By advanced spray drying, attapulgite was transformed into microspheres, refining its drug release characteristics. Various parameters were examined, achieving optimal particle size and morphology at 25% solid content, 2.5% dispersant, and 3% binder. Attapulgite microspheres demonstrated exceptional encapsulation efficiency, exceeding 95% for doxorubicin hydrochloride, highlighting their versatility in drug delivery. FTIR and XRD were used to predict changes in material properties after spray drying. Notably, cytotoxicity tests confirmed the high biocompatibility of attapulgite microspheres, devoid of cell death induction. Attapulgite microsphere loaded with doxorubicin enable sustained drug release and maintain killing ability against tumor cells. This study confirms the viability of spray dried attapulgite microspheres for efficient drug loading and delivery and provides insights for innovative drug delivery systems that utilize the unique properties of attapulgite to advance therapeutics.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·Vol. 51
·期 29
·61520-61530
·
IF 5.6
Yunlong Li,Dan Zhang,Taifang Zhang,Lingxuan Zhou,Peng Wang,Vesna Đorđević,Valery F. Gremenok,Miroslav D. Dramićanin,Chonggeng Ma
Environment-friendly Fe 3+ ions as near-infrared (NIR) activators have garnered significant attention in intelligent NIR light sources; however, designing wavelength-tunable and outstanding thermal stability Fe 3+ -doped NIR luminescent materials remains a formidable challenge. In this study, we synthesized a novel garnet-structured NIR phosphor Y 2 CaAl 4 SiO 12 : Fe 3+ , Yb 3+ and investigated its luminescent properties and energy transfer mechanisms. Under 270 nm ultraviolet light excitation, Y 2 CaAl 4 SiO 12 : Fe 3+ demonstrates broadband NIR emission peaking at 803 nm, characterized by a full width at half maximum (FWHM) of 107 nm and exhibiting a remarkably high internal quantum efficiency (IQE) of 91.70 %, which is markedly superior to most reported Fe 3+ doping NIR-emitting materials. Notably, the incorporation of Yb 3+ ions facilitates an efficient energy transfer process from Fe 3+ to Yb 3+ , which not only significantly broadens the emission spectrum but also enhances the thermal stability of Fe 3+ (I 373 K /I 298 K = 59.24 %) compared to the singly Fe 3+ doped sample (I 373 K /I 298 K = 45.30 %). Finally, the optimized Y 2 CaAl 4 SiO 12 : Fe 3+ , Yb 3+ NIR phosphor exhibits promising potential for anti-counterfeiting applications.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Dan Zhang,Taifang Zhang,Mekhrdod Kurboniyon,Peng Wang,Chonggeng Ma
A novel garnet-type phosphor, Gd2–yYyLuAl4GaO12: Ce3+, was synthesized via a high-temperature solid-state reaction to address the demand for efficient green-emitting materials in solid-state lighting. By employing a cation substitution strategy (Y3+/Gd3+ codoping), the photoluminescence performance was significantly enhanced: the quantum efficiency increased from 86.79 to 96.86%, accompanied by a tunable emission shift from yellow to green (560–520 nm). Moreover, the thermal stability at 423 K improved dramatically from 40.79 to 92.98%, surpassing those of commercial green phosphors. Structural and spectral analyses revealed that the optimized crystal field splitting and enhanced lattice rigidity, induced by cation substitution, effectively suppressed nonradiative transitions, thereby boosting both quantum efficiency and thermal stability. A prototype white light-emitting diode (WLED) fabricated with Y2LuAl4GaO12: Ce3+ phosphor exhibited excellent performance, including a high color rendering index (Ra = 91), low correlated color temperature (CCT = 3043 K), and good color stability under varying driving currents. These findings highlight the significant promise of Gd2–yYyLuAl4GaO12: Ce3+ as a superior green-emitting phosphor for advanced WLED systems, providing a feasible pathway for designing outstanding thermal stability and color-tunable luminescent materials via cationic engineering.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Yi Wang,Yukun Li,Yi Hu,Tengyue Wang,Jiaren Du,Hengwei Lin
Owing to their vibrant chromatic representation and distinctive optical characteristics, stimuli-responsive multicolor luminescent materials have attracted heightened interest within the domains of information security and intelligent systems. Nonetheless, developing phosphors that exhibit stimuli responsiveness, especially those with luminescence influenced by both temperature variations and excitation wavelengths, continues to pose considerable difficulties. In this study, we present a multicolor luminescent compound derived from tridymite-structured CaGa2O4 codoped with Bi3+ and Eu3+. Significantly, this Bi3+/Eu3+ coactivated phosphor demonstrates responsiveness to thermal variations and excitation wavelengths, along with exceptional chromatic tunability ranging from yellow to orange red. The observed tunability of the color is attributed to the distinct thermal quenching behaviors associated with Bi3+ and Eu3+ emitters. Thermoluminescence profiles, in conjunction with persistent luminescence decay analysis and photostimulated luminescence, elucidate the distribution and photoactive nature of these traps. Finally, we illustrate potential applications in visual thermometry and information display using CaGa2O4:Bi3+, Eu3+-based luminescent ink. This study not only provides strategic insights for the development of inorganic phosphors with adjustable emission spectra and stimuli-responsive properties but also underscores significant potential in fields such as information security, thermal distribution visualization, anticounterfeiting, and smart platforms.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Ziwu Ding,Zilong Zhang,Yaqing Zou,Xiaofeng Li,Xiaolei Lin,Chunming Liu,Can Wang,Yong Chen,Xiaozhen Huang,Liangliang Zhang,Hongfang Du,Yue Wang,Mingwei An,Peng Gao,Yang Wang
Perovskite solar cells (PSCs) employing 2,2″,7,7″-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9’-spirobifluorene (Spiro-OMeTAD) as the hole-transporting material (HTM) often suffer from dopant-induced instabilities, including lithium (Li) salt aggregation, ion migration, and the volatilization of tert-butylpyridine (tBP). Additionally, the solution processing of conventional HTMs typically relies on toxic solvents, posing environmental and industrial challenges. In this study, we introduce an “ionic lock” strategy by incorporating polyoxygenated side chains─such as crown ether and 2-methoxyethoxy groups─into the backbone of conjugated hole conductors. The resulting HTMs, MPA-NDTCE and MPA-NDTME, exhibit excellent solubility in eco-friendly solvents like 3-methylcyclohexanone (3-MC) and demonstrate favorable compatibility with Li-based dopants. Notably, MPA-NDTCE shows enhanced molecular ordering, superior hole mobility, and stronger interactions with Li+ ions, facilitating dopant immobilization and stabilizing the film morphology. Consequently, PSCs utilizing MPA-NDTCE as a green-solvent-processable HTM achieve a high power conversion efficiency of 22.6%, coupled with robust thermal stability under aging at 65 °C. These improvements are attributed to the elimination of tBP and the effective suppression of Li-ion migration.
✓ 已验证
DOI
高影响因子