ACS Applied Bio Materials
·
2025
·
IF 4.7
Yu Cui,Yanmin Ma,Bai Sun,Zelin Cao,Kaikai Gao,Xiaorui Zhang,Yiqing Chen,Wenting Yang,Guoqing Tong
Memristor has shown significant application prospects in the post Moore’s electron era, but its application in the field of reproductive medicine is still blank. In this work, a memristor with Ag/C40H56-PEDOT:PSS/FTO structure was prepared by using a heterojunction of natural biomaterial carotene (C40H56) and Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as the functional layer of the device, which demonstrates remarkable resistance switching capabilities under a certain bias voltage. Subsequently, this memristor was employed to monitor the follicular fluid within the ovaries during aging, indicating that the device can be effectively employed to monitor the follicular fluid within the ovaries during the aging process and to conduct diagnoses by leveraging the correlation between H2O2 and oocyte aging. Furthermore, the results confirm the memristor can assist physicians in predicting ovarian function, oocyte quality and subsequent outcomes of embryos in vitro fertilization. Finally, through a meticulous analysis of the testing results, the working mechanisms and conductivity models of the device were comprehensively expounded upon by means of segmented fitting of experimental data. This research work demonstrates the efficacy of memristors in monitoring abnormal oocytes and embryonic outcomes, thereby laying a scientific foundation for the application of memristors in health monitoring and disease diagnosis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2025
·
IF 5.5
Tianli Han,Jing Xu,Kehao Tao,Chenchen Zhang,Lixing Li,Xu Ge,Xueke Liang,Panya Zuo,Yiwen Xie,Jinjin Li,Jinyun Liu
The shuttle effect of polysulfides is one of the most severe issues in lithium–sulfur (Li–S) batteries. Here, we develop a graphene quantum dot (GQD)-decorated hollow porous ZnO/ZnCo2O4 as a sulfur host, which effectively immobilizes polysulfides and thus achieves good electrochemical performances. Polar ZnO and ZnCo2O4 as double shields show strong adsorption toward polysulfides as demonstrated by using density functional theory calculations, GQDs in shells improve conductivity, and a hollow porous morphology accommodates volume changes of sulfur upon cycling. The ZnO/ZnCo2O4/GQDs@S cathode displays high performances including a stable capacity of 797 mAh g–1 after 200 cycles at 0.2 C, reversible rate performance after three rounds of measurements, and good tolerance under low and high temperatures. These findings will find important applications for engineering many high-performance materials for Li–S batteries and accelerating applications.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2025
·
IF 3.9
Jiaqi Xia,Shuangshuang Chen,Zhencai Guo,Cheng Chen,Jing Zhang,Zhiwei Zhang,Lixia Jia
By utilizing the etching reaction between a hydrophobic copper mesh (CuM) and an alkali solution to obtain a superhydrophilic copper mesh (AT CuM), and then only depending on the modification of linoleic acid (LA) at room temperature, a fluorine-free superhydrophobic copper-based material (CuM@Cu(OH)2@LA) was fabricated. Subsequently, a funnel-shaped fog collector was constructed by simple folding for fog collection, which collected 10 400 mg of water with a water-harvesting rate (WHR) of 13.9 mg min–1 cm–2 after 30 min. Meanwhile, the AT CuM was deposited with polydopamine to obtain a photothermal nonfluorinated superhydrophobic copper base material (CuM@Cu(OH)2/PDA@LA). CuM@Cu(OH)2/PDA@LA was folded in the shape of a boat, filled with degreasing cotton, and placed upside down for seawater desalination as the (CuM@Cu(OH)2/PDA@LA)/degreasing cotton photothermal interface evaporation device ([(CuM@Cu(OH)2/PDA@LA)/DC]-PTIED). Thanks to its photothermal effect and superhydrophobic property providing the possibility of desalination, the evaporation device was capable of photothermal heating and floating on the water, achieving an evaporation rate of up to 1.85 kg m–2 h–1 under seawater outdoor simulation test conditions. Condensed water, which was desalinated by [(CuM@Cu(OH)2/PDA@LA)/DC]-PTIED, met the World Health Organization (WHO) drinking water standards. In terms of durability analysis, both products maintained good wettability and performance after continuous 12 h mechanical abrasion, immersion in water, and UV irradiation. As a result, these two copper-based non-fluorine superhydrophobic materials had the advantages of superior performance, a simple preparation path, convenient operation, a mild reaction process, sustainable energy saving, and good application durability, providing a new perspective for the large-scale and low-cost production of freshwater resources in a low-carbon and sustainable way in underdeveloped areas.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2025
·Vol. 36
·期 30
·1912
·
IF 2.8
Wen Jiawei,Zhang Songyang,Chen Jian-an,Zhang Xiaoming,Wang Xin,Huang Guoyong
Titanium niobium oxide (TiNb 2 O 7 , TNO) has become a high-performance anode material for fast-charging lithium-ion batteries due to its high specific capacity, safety advantages and stable cycling performance. Nevertheless, the material’s low electronic/ionic conductivity remains a critical challenge for commercial implementation. The present study presents a novel Ni-doping strategy for TNO that optimizes the electronic structure, achieving a remarkable improvement in lithium-ion storage performance through enhanced charge transfer and ionic diffusion. The Ni 0.02 -TNO anode exhibits a reversible capacity of 240.7 mAh g −1 after 150 cycles at 1C, while retaining 172.9 mAh g −1 even after 1000 cycles under an ultra-high rate of 10C, demonstrating exceptional long-term stability and rate capability. Furthermore, the assembled LiFePO 4 (LFP) ||Ni 0.02 -TNO pouch cell demonstrates outstanding cycling stability, with 86.9% capacity retention over 500 cycles at 1C. Density functional theory calculations reveal that Ni doping reduces the bandgap from 2.193 eV to 0.765 eV, thereby enhancing electronic conductivity and facilitating faster charge transfer kinetics. This work provides a viable pathway for designing advanced lithium-ion batteries with rapid-charging capability and long-term cyclability.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2025
·
IF 5.5
Liwei Liu,Yutong Wang,Chunmeng Zhang,Shaochen Wang,Guoyong Huang
LiTi2(PO4)3 (LTP) is widely recognized as a promising anode material for aqueous lithium-ion batteries due to its stable three-dimensional framework structure and working potential within the aqueous electrolyte potential window. However, the low conductivity of pure-phase LTP poses a significant challenge that must be overcome for its practical application. In this work, N-doped carbon-coated LTP (NC@LTP) composites with a layered flower-like morphology were synthesized via an organic precipitation method. The N-doped carbon layer improved the conductivity and hydrophilicity of the anode and caused carbon defects that facilitated Li+ transport. The initial specific capacity at 10 C was enhanced from 39.4 to 81.5 mAh g–1 after N-doping. The pouch cells retained 92.7% of their capacity after 150 cycles at 1 C and demonstrated excellent safety in abuse tests. In addition, the modification mechanism of the N-doped carbon layer was verified through DFT calculations. This study provides references and ideas for the modification of high-performance aqueous lithium-ion battery electrode materials.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY & FUELS
·
2025
·
IF 5.3
Jinrong Zhang,Zhijuan Shi,Ming Zhong,Jiahui Cao,Bitao Su
Self-supported nonprecious metal selenide electrocatalysts have demonstrated significant potential for oxygen evolution reaction, due to stable spatial framework and extensive electrochemical interface. However, the design and construction of metal selenides, particularly heterostructures, continue to pose significant challenges. In this work, self-supported Ni–Co selenide heterostructures were successfully fabricated via a one-step selenization process utilizing the hydroxide precursor. The electrocatalytic performance of the composite was systematically examined, focusing on the influence of selenization temperature and the Ni/Co molar ratio. As expected, the optimal composite shows remarkable electrocatalytic performance in an alkaline environment, achieving an overpotential of merely 291 mV at 50 mA cm–2, surpassing numerous previously reported Co- and Ni-based electrocatalysts. Additionally, the electrocatalyst demonstrates exceptional cyclability and maintains its structural and compositional integrity even after stability testing.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2025
·
IF 16
Huangxu Li,Xu Wang,Fangyan Liu,Yulun Wu,Jingqiang Zheng,Zezhou Lin,Tiancheng Liu,Jin Xiao,Jianzhong Jiang,Haitao Huang
Fe- and Mn-based polyanionic electrode materials are important cathode materials for sodium-ion batteries (SIBs) due to their low cost. However, due to the low redox potential of Fe2+/3+ and the notorious Jahn–Teller (JT) effect, severe lattice distortion that is associated with Mn2+/3+ redox hinders Fe and Mn redox activation, leading to inadequate cycling stability and rate performance. Here, we discover both high Mn2+/3+ and Fe2+/3+ redox activation in a Na4Mn1.5Fe1.5(PO4)2(P2O7) (NMFPP) material. It is revealed that the substitution of Mn reduces the Fe–O bond covalency, elevating the Fe2+/3+ redox potential to improve the energy density. Furthermore, the JT effect is accompanied by Mn eg orbital splitting, with the dx2–y2 and dz2 orbitals being positioned at the top of the valence band and the bottom of the conduction band, respectively, which primary contributes to reduce the material band gap and facilitate electron transfer. Experimental and theoretical studies discover an anisotropic lattice distortion behavior, which enlarges Na+ diffusion pathways, lowering diffusion energy barriers and enabling rapid Na+ migration. As a consequence, high Fe–Mn redox activity is achieved and the NMFPP demonstrates enhanced energy density, rate performance, and exceptional cycling stability for sodium storage. These findings prove that the JT effect and lattice distortion could synergistically make positive impacts on transition-metal redox activation, which is informative for the design of high-performance electrode materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sensors
·
2025
·
IF 9.1
Baiqi Cui,Xiaoyin Liu,Jinbiao Ma,Jingyu Wu,Yunxiao Wang,Haiying Ding,Di Wang,Qingjun Liu,Fenni Zhang
Phase-sensitive surface plasmon resonance (P-SPR) techniques offer superior sensitivity compared to conventional intensity-based SPR methods. However, current implementations, such as interference-based and polarization-based phase measurements, often face trade-offs between optical complexity and phase resolution, and typically lack access to full polarization information. Here, we report a compact and versatile Stokes vector-based polarization SPR imaging (Sp-SPRi) system that addresses these limitations through full Stokes vector analysis of imaging light after polarization modulation. This analysis enables the simultaneous acquisition of phase and multiple polarization parameters for enhanced molecular measurement. The Sp-SPRi system achieves a high phase sensitivity of 1.80 × 10–7 refractive index units (RIU), supporting kinetic, label-free detection and quantification of biomolecular interactions. We demonstrate its performance through kinetic measurements of protein binding, small molecule interactions, and in situ glycoprotein measurement of single cells. With its simplified optical configuration, microfluidic integration, and high-throughput imaging capabilities, Sp-SPRi provides a powerful platform for multidimensional biosensing. This work broadens the analytical scope of P-SPR, offering a robust and accessible approach for applications in point-of-care diagnostics, early disease detection, and drug screening.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jiufeng Dong,Haoxiang Zhao,Anda Wang,Yujuan Niu,Shuoyan Liu,Liang Sun,Yuqi Liu,Zizhao Pan,Qing Wang,Hong Wang
Aromatic polyetherimide (PEI) emerges as a promising high-temperature dielectric for energy storage in demanding applications like electric vehicles and aerospace systems. However, at elevated temperatures (>140 °C), the delocalized π-conjugated backbone of PEI facilitates severe charge transport, causing significant performance degradation. Here, we overcome this limitation through a local constrained conformational architecture engineered via fluorene functionalization and methyl side-group modification in PEI. Despite exhibiting a reduced bandgap, the optimized PEI film achieves a remarkable 84 °C increase in glass transition temperature ( T g ) and a 380 % surge in discharged energy density ( U e = 4.56 J cm −3 at 150 °C) while maintaining >95 % charge-discharge efficiency ( η ), surpassing the performance of most wide-bandgap polymer dielectrics and their composites. Mechanistically, the unique constrained non-planar conformation imposed by fluorene substituents and methyl groups reduces interchain electronic coupling by three orders of magnitude and restricts chain mobility. This synergistically suppresses both thermal molecular motion and intra/interchain charge hopping. Unlike conventional bandgap-engineering approaches that primarily limit charge excitation, our strategy directly targets the charge hopping mechanism by tailoring key local three-dimensional constrained conformations. Simultaneously, this work clarifies the interdomain relationships between molecular conformation and quantum charge-hopping processes, offering fundamental molecular-level design guidelines for developing next-generation high-temperature energy storage polymer dielectrics.
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2025
·
IF 7
Luyong Zhang,Zhencheng Wu,Jingdong Yan,Shibin Wang,Zilong Chen,Zhihua Yang,Fangfang Zhang,Shilie Pan
Sulfates have remained promising candidates for deep-ultraviolet (DUV) optical crystals owing to the inherently wide bandgaps induced by the [SO4] tetrahedral groups. However, the structural rigidity of [SO4] tetrahedra imposes severe restrictions on the polarization anisotropy, fundamentally preventing sulfates from achieving sufficient birefringence required for regulating light polarization. Herein, by incorporating f0 rare earth metal cation Y3+ into alkali metal sulfates, we synthesized six compounds, AY(SO4)2 and A3Y(SO4)3 (A = K, Rb, Cs). They exhibit dramatically enhanced birefringence between 0.013–0.056 at 546 nm, with up to 25 times that of their parent alkali metal sulfates, which originate from the highly aberrant Y–O polyhedra and the dimensionality reduction of the Y–O–S network regulated by A-site cations. This study provides valuable insights into the further exploration of sulfate-based optical materials.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Qixian Zheng,Tingting Zhang,Suiting Ning,Xiangbin Chen,Tian Yu,Zhangheng Lai,Gangjian Tan,Xinfeng Tang,Ning Qi,Zhiquan Chen
As a typical argyrodite compound, Ag8SnSe6 is a very promising candidate for thermoelectric materials due to its inherently ultralow lattice thermal conductivity. However, the main obstacle to further improving its thermoelectric properties is its low intrinsic carrier concentration. Appropriate doping may increase the carrier concentration, but the electronic thermal conductivity will also increase simultaneously, which partially compensates for the optimized power factor. This is particularly prominent for materials with ultralow lattice thermal conductivity. In this study, SnI2 was introduced into Ag8SnSe6, which provides more carriers and thus successfully improves the electrical properties. The maximum power factor at 748 K is enhanced from 4.63 μW cm–1 K–2 to 5.83 μW cm–1 K–2 after adding 3 at. % of SnI2. Meanwhile, the substitution of I for Se weakens the chemical bonding strength, resulting in a lowered sound velocity. In addition, doping of I at the Se site also enhances the bond asymmetry, which causes a stronger lattice anharmonicity. As a result, an extremely low lattice thermal conductivity of 0.058 W m–1 K–1 is achieved at 748 K. Eventually, a high zT value of 1.36 was obtained through the above synergistic optimization, which is a 39% improvement compared to the pristine sample (0.98). Our study demonstrates that chemical bonding engineering is an effective way to further suppress the lattice thermal conductivity of Ag8SnSe6 and also provides guidance for improving the thermoelectric properties of other argyrodite compounds.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2025
·Vol. 27
·期 45
·24273-24283
·
IF 2.9
Jin Zou,Daoyun Zhu,Zhongfei Mu,Song Xu,Nurahmat Wali,Fugen Wu,Huafeng Dong,Xin Zhang,Xiao Wu,Yifei Luo,Yuchun Zhan
Near-infrared (NIR) spectroscopic technology has shown extensive application prospects. However, developing NIR phosphors with tunability and high thermal stability is a huge challenge. In this work, a highly promising phosphate compound, K3Ga2(PO4)3, has been successfully synthesized. When doped with Cr3+ ions, it is particularly noteworthy that Cr3+ exhibits highly efficient and thermally stable broadband NIR luminescence in the tetrahedral coordination environment. This unique property makes K3Ga2(PO4)3:Cr3+ a compelling candidate for advanced photonic applications. Therefore, studying the luminescent properties of Cr3+ rare earth ions doped into tetrahedral sites is of great significance. In the tetrahedral coordination environment of K3Ga2(PO4)3:Cr3+ ions exhibit broadband near-infrared emission spanning from 700 to 1100 nm (λem = 822 nm, FWHM = 124 nm) under 452 nm blue light excitation. Remarkably, the quantum efficiency reaches as high as 70.9%, demonstrating its exceptional potential for advanced photonic applications. In addition, the phosphors demonstrated exceptional thermal stability with near-zero thermal quenching. The NIR luminescence intensity at 373 K and 423 K retained 109.0% and 90.4% of its initial room-temperature value, respectively. This remarkable performance can be attributed to the material's ultra-wide band gap, and minimal electron–phonon coupling. The NIR pc-LED devices, fabricated by integrating the optimized K3Ga1.93(PO4)3:0.07Cr3+ phosphors with a blue LED chip (λex = 455 nm), achieved a near-infrared output power of 274 mW with a conversion efficiency of 5.42% under a driving current of 100 mA. Experimental results demonstrate that the fabricated NIR pc-LED exhibits significant potential for applications in night vision and vein imaging technologies. This study provides a strategic framework for designing high-performance NIR pc-LED devices, utilizing K3Ga2(PO4)3:Cr3+ as an efficient phosphor-converted light source, and offers valuable insights for practical implementation in advanced optical systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子