Nature Communications
·
2026
·
IF 18.1
Hongyu Chen,Xueliang Zhu,Kangwei Mo,Ning Ma,Shuting Pang,Bianyuan Ren,Xinyu Jiang,Man Yang,Yibo Tu,Guodong Li,Mingzhou Yu,Wensheng Yan,Gongxun Bai
1D/3D heterostructure perovskite solar cells have attracted considerable attention owing to their exceptional stability. However, conventional 1D perovskites typically align parallel to the substrate or in disordered orientations, hindering longitudinal carrier transport and limiting device efficiency. Here, we introduce a bilayer interface engineering strategy to induce a vertically oriented 1D capping layer on the surface of the 3D perovskite surface. This vertically ordered 1D/3D heterojunction enables extended carrier lifetime with rapid interlayer charge transport. More importantly, the vertically oriented 1D capping layer not only tunes energy level alignment but also significantly reduces interface trap density, thereby minimizing photovoltage deficit to 350 mV. With these merits, the champion device achieves a maximum power conversion efficiency of 25.9% (26.0% certified). Under high-temperature 85 °C and continuous illumination conditions, the 1D/3D devices maintain 83% and 86% of their initial efficiency after 500 and 1200 hours, respectively, demonstrating their excellent practical durability. Disordered orientations of the 1D component limit carrier transport in 1D/3D heterostructures. Chen et al. report bilayer interface engineering to induce vertically ordered 1D capping layers, enhancing charge transport, and achieving a certified efficiency of 26.0% with strong thermal and light stability.
✓ 已验证
DOI
PubMed
高影响因子
Bioactive Materials
·
2026
·
IF 23.6
Chongyi Li,Zewen Chang,Yuxi Zhang,Shihong Shen,Lin Liu,Dan Zeng,Daidi Fan
Multidrug-resistant (MDR) bacterial infections, notably methicillin-resistant Staphylococcus aureus (MRSA), necessitate innovative antibiotic-free wound therapies. Here, a bio-heterojunction-integrated recombinant collagen hydrogel (CAP@MXene/CuTCPP) is designed that synergistically combines photothermal therapy (PTT), photodynamic therapy (PDT), and peroxidase-like (POD-like) activity for multimodal antibacterial action. The borate-bonded dynamically crosslinked hydrogel is composed of polyvinyl alcohol (PVA), 3-aminophenylboronic acid (APBA)-modified recombinant collagen (CF-1552), and MXene/CuTCPP bio-heterojunctions (bio-HJs). Under 808 nm near-infrared (NIR) irradiation, the MXene/CuTCPP bio-HJs exhibit a high photothermal conversion efficiency (44.51%), inducing localized hyperthermia to disrupt bacterial membranes. Importantly, the construction of a Schottky junction at the MXene/CuTCPP interface significantly accelerates photo-excited electron transfer, thereby catalytically amplifying the production of additional ROS ( 1 O 2 , ·O 2 − , ·OH) for synergistic bacterial eradication. This triple antibacterial mechanism ensures a 99.95% MRSA eradication rate without inducing drug resistance, while effectively removing the biofilm. In vivo, the hydrogel accelerates wound closure (98% by day 11) not only by providing a biomimetic scaffold but also by regulating the polarization of macrophages from M1 to M2, and significantly promoting angiogenesis. This work presents a biocompatible and self-adaptable platform that overcomes the killing-healing trade-off through synergistic energy/charge transfer integration, offering insights for advanced immunomodulatory wound management. A bio-heterojunction-integrated recombinant collagen hydrogel (CAP@MXene/CuTCPP) is designed for synergistic photothermal, photodynamic, and POD-like antibacterial therapy against MDR infections like MRSA. Featuring dynamic borate crosslinking and high photothermal efficiency (44.51%), it achieves 99.95% bacterial eradication, biofilm removal, and accelerated wound healing (98% closure by day 11) via ROS generation, macrophage polarization, and angiogenesis promotion. This platform advances antibiotic-free wound management.
✓ 已验证
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Minghe Wang,Zhongxu Lian,Jinda Yang,Jinkai Xu,Yanling Tian
The treatment of oily wastewater demands separation materials that are efficient, durable, and resistant to harsh environments. In this work, a needle-like nanostructure (NLNS) was fabricated on a 200-mesh aluminum mesh (Base) through a two-step process combining plasma electrolytic oxidation (PEO) with hydrothermal treatment (HT). The effect of hydrothermal duration on the resulting morphology was systematically examined, identifying optimal conditions (200°C, 8 h) that yield a uniform, high-density NLNS. Unlike conventional PEO-based coatings, the sharp-tipped nanoneedle morphology maximizes capillary forces to stabilize a robust hydration layer, achieving exceptional underwater superoleophobicity with an underwater oil contact angle (UWOCA) as high as 168°. The NLNS exhibited high separation efficiency (up to 97.6%) for n-hexane/water mixtures under highly acidic, alkaline, and saline conditions, along with a stable permeation flux of ∼4900 L m −2 h −1 over 20 cycles. Durability assessments confirmed robust mechanical resistance (UWOCA > 140° after 16 friction cycles) and enhanced corrosion resistance. This strategy avoids toxic fluorinated modifiers and uses only water as the HT medium, providing a green, low-cost, and scalable route for industrial oily wastewater treatment. Download: Download high-res image (185KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Lei Guo,Yuxin Feng,Zhongyi He,Zhongnian Zhao,Yan Tan,Senlin Leng,Viswanathan S. Saji
Alkaline Zn Mn flow batteries (AZMFBs) have emerged as a promising candidate for large-scale energy storage due to their high theoretical energy density, environmental tolerance, and low cost. Nevertheless, the electrochemical stability and cycling performance of AZMFBs are substantially hindered by hydrogen evolution, irreversible zinc deposition, and zinc dendrite formation. This study presents sodium gluconate (SG), a biodegradable and water-soluble organic chelating agent, as an addition in the anolyte to modulate zinc electrodeposition behavior. The impact of SG on the electrochemical performance of the zinc anode is meticulously analyzed using cyclic voltammetry, Tafel analysis, chronoamperometry, and galvanostatic cycling. Results reveal that SG effectively coordinates with Zn 2+ ions, promoting uniform nucleation and suppressing dendritic growth. Furthermore, SG reduces side reactions by stabilizing the electrode-electrolyte interface, resulting in a coulombic efficiency (CE) of 95.6%, an energy efficiency (EE) of 81.4%, and a service life that is double that of pristine batteries. Examination of surface morphology and structure further confirmed that a thick, smooth Zn deposit formed in the presence of SG. This study provides insights into the role of green additives in regulating Zn anodes for Zn-based flow battery systems and offers guidance for the further development of sustainable alkaline Zn-based energy-storage technologies.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Min Gao,Xiao Yang,Weiya Jia,Linxin Liu,Guihua Lu,Lai Wei,Bei Zhang,Can Li,Feng Zhao
Surface-enhanced Raman spectroscopy (SERS) has attracted considerable attention owing to its high sensitivity, long-term stability, and non-destructive detection capabilities. However, achieving both high sensitivity and reproducible signal output within a single SERS substrate remains a significant challenge in recent years. In this study, a highly sensitive and reproducible SERS substrate was successfully designed and fabricated based on Ag/ZnO spherical shell ordered arrays, leveraging the synergistic effects of localized surface plasmon resonance and charge transfer mechanisms, both of which contribute effectively to Raman signal enhancement. The SERS performance of the substrate depended on the thickness of the ZnO layer, with a maximum enhancement factor of 2.68 × 10 8 achieved using a 30 nm ZnO layer and rhodamine 6 G as the probe molecule. A detection limit as low as 10 −9 M was attained while maintaining a relative standard deviation below 6%. This exceptional performance arises from the synergistic contribution of the intense localized electromagnetic field generated by the spherical-shell architecture and the efficient charge transfer pathways enabled by the multifunctional Ag/ZnO bilayer structure. This work presents a promising strategy for the development of recyclable and ultra-sensitive SERS sensors applicable to biomolecular detection and organic pollutant monitoring. Download: Download high-res image (158KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2026
·
IF 16.7
Rui Li,Xupeng Qin,Yang Liu,Shen Cheng,Haixin Sun,Qizheng An,Youcai Che,Jingqiu Shang,Xin Chen,Shuowen Bo,Junfeng Yang,Qinghua Liu
P-modulated Fe single atoms are designed to steer interfacial PCET pathways. • Remote P-doping reconfigures interfacial water networks for optimal proton supply. • In situ spectra and simulations reveal accelerated *COOH formation kinetics. • The FeNPC catalyst achieves a remarkable CO Faradaic efficiency of 98.68%. In electrocatalytic CO₂ reduction reaction (CO₂RR), the rate-determining formation of the key *COOH intermediate requires a facile and moderate proton supply, yet excessive water activation generates abundant adsorbed hydrogen (*H) that triggers the competing hydrogen evolution reaction (HER) and diminishes CO selectivity. Here, we develop a phosphorus-doped Fe single-atom catalyst (FeNPC) to steer interfacial proton-coupled electron transfer (PCET) pathways. P incorporation reconstructs the interfacial hydrogen-bonding network, selectively enriching weakly hydrogen-bonded and free water molecules to ensure an optimal proton supply for *COOH generation while suppressing excessive *H accumulation. In-situ ATR-SEIRAS characterization confirms enhanced *COOH signals, and MD/DFT calculations reveal that P-doping lowers activation barriers for water dissociation and *COOH formation. Consequently, FeNPC achieves a CO Faradaic efficiency of 98.68% at −0.4 V vs. RHE with reliable stability. This work demonstrates that nonmetallic doping optimizes PCET kinetics by reshaping the interfacial water microenvironment, establishing a new paradigm for designing highly-selective CO₂RR electrocatalysts. Download: Download high-res image (273KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Ranran Cao,Mantang Chen,Yipeng Wang,Xuehui Sun,Xiaoyu Wang,Peijian Sun,Cong Nie,Yang Xu
A facile one-step ball milling strategy was developed for direct synthesis of functionalized carbon adsorbents from natural flake graphite. The obtained ball-milled carbon materials (FG-BM) were systematically characterized and evaluated for their enhanced toluene removal performance. The obtained FG-BM exhibited a transformed morphology from stacked layers to micron-sized spherical particles with hierarchical porosity, a dramatically increased specific surface area, and abundant nitrogen/oxygen functional groups. These structural and chemical modifications significantly enhanced toluene removal performance, achieving 99.75% efficiency compared to 67% for pristine FG, with complete mineralization of toluene into non-toxic CO 2 rather than CO. Systematic optimization revealed that milling parameters, including particularly ball size, rotational speed, and cycle number, critically influenced performance, with 15 mm balls, 700 rpm, and 8 cycles delivering optimal results. The strategy demonstrated high generality, notably improving toluene removal efficiency for three commercial carbon adsorbents from 25 to 35% to 90.6–99.8%. Mechanistic studies identified pyridinic-N and oxygen-containing groups (C O, O-C=O) as key active sites, facilitating toluene adsorption and catalytic oxidation via intermediates such as benzaldehyde and benzoic acid. This work provides a scalable, solvent-free route to high-performance functionalized carbon adsorbents for efficient toluene removal.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yixuan Jiang,Yanlin Zhao,Fan Zhao,Xiaowei Cao,Dingding Jing,Haifeng Huang,Qinglei Hang
Chiral D Au NCs capillary SERS for label-free non-invasive saliva D-Glc assay. • Sensor achieves 0.30 nM LOD, covering clinical saliva glucose ranges. • Assay finishes in 10 min with 50 μL sample, high accuracy and anti-interference. • Assay shows correlation with GOD-POD gold std. (R 2 = 0.9313) and 0.947 AUC. • It offers a promising tool for early diabetes screening and clinical translation. Early, non-invasive screening and risk prediction of diabetes are crucial for effective prevention and control, as well as for delaying the onset and progression of complications. In this study, we developed a capillary surface-enhanced Raman scattering (SERS) sensor based on chiral gold nanocubes (D Au NCs) for the non-invasive, label-free, and rapid detection of d -glucose (D-Glc) in saliva. By leveraging the chiral recognition capability and strong SERS activity of D Au NCs, the sensor specifically identifies D-Glc and significantly amplifies its characteristic Raman signals, enabling quantitative analysis in complex saliva matrices without labeling. The sensor demonstrates outstanding analytical performance, covering the clinically relevant range of salivary glucose concentrations with a detection limit as low as 0.30 nM. Based on a capillary detection platform, the assay is simple and rapid, completed within 10 min using only a 50 μL micro-sample, while demonstrating strong anti-interference capability and high detection accuracy. Clinical saliva testing showed strong correlation with the glucose oxidase-peroxidase (GOD-POD) gold standard (R 2 = 0.9313), enabling reliable discrimination between healthy individuals and diabetic patients. Receiver operating characteristic (ROC) analysis yielded an area under the curve (AUC) of 0.947, confirming its high efficacy in diabetes risk screening and strong diagnostic performance. Consequently, the D Au NCs-based capillary SERS sensor provides a promising strategy for early, non-invasive diabetes screening and prevention, possessing broad potential for clinical translation and application.
✓ 已验证
产品关联
DOI
高影响因子
Food Bioscience
·
2026
·
IF 6.2
Yangfan Hu,Yulong Yao,Cheng Li,Huizhen Li,Tianyu Hou,Zhijun Zhang
To improve the comprehensive utilization of perilla meal, dual-enzyme hydrolysis was optimized to prepare antioxidant peptides (PAP). The optimal conditions were pH 8.0, 50°C, 6 h, solid-liquid ratio of 1:22 g mL −1 , 1:1 compound enzymes and 6% enzyme dosage. The dual-enzyme product presented higher hydrolysis degree and antioxidant capacity than single-enzyme groups, with excellent solubility and processing stability against food additives, metal ions and food ingredients. The ultrafiltration screened active fraction PAP-SF-4 effectively alleviated oxidative damage in H 2 O 2 -stressed 4T1 cells by regulating ROS, MDA and endogenous antioxidant indexes. A key antioxidant peptide GDF was identified, which tightly bound to Keap1 through hydrogen bonds and hydrophobic interactions. This study provides a theoretical basis for the development and application of perilla-derived bioactive peptides.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Xinmiao Hu,Lulu Liu,Yinyan Wang,Bo Peng,Hui Yu,Hongwei Lu,Weijie Song,Yinhua Wan,Jianquan Luo
Complexation-assisted NF enables efficient concentration of rare-earth leachates. • DTPA forms stable complexes, reducing osmotic pressure and free-ion activity. • Inorganic scaling (CaSO 4 /MgSO 4 ) is effectively suppressed during concentration. • High rejection (> 95%) and 8× concentration achieved with minimal fouling. • Integrated NF–extraction/ligand reuse process enables sustainable RE recovery. Efficient membrane concentration of sulfate-based rare-earth leachates is severely restricted by high osmotic pressure and inorganic scaling caused by coexisting Ca 2+ and Mg 2+ . In this study, a complexation-assisted nanofiltration (NF) strategy was developed to achieve high-flux concentration and anti-scaling separation through ion-speciation regulation. Systematic screening identified diethylenetriaminepentaacetic acid (DTPA) as the optimal complexing agent, which selectively coordinates multivalent cations to form hydrophilic, negatively charged complexes with enlarged hydrated size. The reduced free-ion concentration lowers the solution osmotic pressure and suppresses the supersaturation-driven crystallization of CaSO₄ and MgSO₄. Coupled with the NF10 membrane, the process achieved rejections of 97.67% for La 3+ (representative rare earth ion), 95.09% for Ca 2+ , and 97.18% for Mg 2+ , while maintaining stable operation during eight-fold concentration with negligible flux decline. Fouling analysis showed that DTPA complexation effectively inhibited irreversible inorganic fouling and shifted the dominant filtration resistance from pore blockage to mild concentration polarization. SEM-EDS and FTIR characterizations further confirmed the substantial suppression of sulfate scale deposition on the membrane surface. To demonstrate process applicability, a coupled decomplexation–extraction step using P507 enabled efficient recovery of rare-earth ions, and the regenerated DTPA maintained stable separation performance over four reuse cycles. This work provides an effective membrane-based route for the high-flux concentration and sustainable recovery of rare-earth resources from sulfate leachates. Download: Download high-res image (132KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Xinran Lv,Tianxiao Chen,Ziye Zhu,Lichen Zhang,Zhongwei Wu,Shujuan Wang,Xiangyu Sun,Tingting Ma
UAE-DES boosts the yield >10% vs. UAE-ET and >30% vs. UAE-ATPS. • H-bonding mechanism revealed by MDS explains DES-enhanced solubility and stability. • DES extracts excel in stability, enabling the high-value use of berry by-products. • Solvent choice>method change for efficient, stable Aronia anthocyanin extraction. • Method modification also effectively enhances anthocyanin thermal stability. Aronia melanocarpa is rich in anthocyanins, requiring efficient and stable extraction methods for fruit and pomace valorization. This study optimized and compared three ultrasound-assisted extraction methods—ethanol (UAE-ET), aqueous two-phase system (UAE-ATPS), and deep eutectic solvent (UAE-DES)—for Aronia melanocarpa anthocyanins (AA) extraction. Under optimized conditions, UAE-ET and UAE-ATPS yielded total anthocyanin content (TAC) of 14.98 and 12.67 mg/g, versus 16.63 and 16.59 mg/g for UAE-DES (UAE-DES > UAE-ET > UAE-ATPS), representing increases of >10.76% (vs. UAE-ET) and >30.96% (vs. UAE-ATPS), respectively. Cyanidin-3-O-galactoside (68.09–73.73%) and cyanidin-3-O-arabinoside (18.95–25.16%) dominated the profile (>90%). UAE-DES extracts exhibited superior color intensity (3.86 and 3.99), a degradation index 12.5% lower than UAE-ET, and enhanced thermal stability (44.84–50.00% retention at 80 °C, k = 0.1171), along with over 2.06-fold higher antioxidant activity than UAE-ET. DES forms hydrogen bonds with anthocyanins, enhancing extraction and stability. These findings confirm DES as an efficient stabilizing medium for AA, supporting its application in high-value anthocyanin products. Download: Download high-res image (240KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
Developments in the Built Environment
·
2026
·
IF 8.7
Yue Zhao,Di Zhu,Qiao Wang,Xiaomao Wang,Wei Zhou,Xiang Ji,Xiaolin Chang
Shape-stabilized phase change materials (SSPCMs) are promising for thermally functional mortars, but slight leakage during mixing and phase transition can degrade the particle–matrix interface and reduce durability. This study developed a surfactant-free interfacial self-assembly route to build a hydrophobic silica shell on diatomite/ n -hexadecane SSPCM particles. The shell increased the particle contact angle from 112.1° to 140.2° and reduced leakage to 0.12% after 4 h at 60 °C. At equal PCM dosage, the shell-modified mortar showed lower water absorption and chloride diffusion and higher compressive strength than mortar with unmodified SSPCM. After 500 thermal cycles between 0 and 40 °C, the shell-modified mortar retained a melting enthalpy of 8.85 J/g with only 1.8% latent-heat loss. Microscopy and nanoindentation indicated a denser interfacial region, showing that a simple mineral shell can improve thermal-storage mortar reliability for building applications.
✓ 已验证
产品关联
DOI
高影响因子