BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Xianfei Wang,Degui Gao,Mengyu Ma,Ruxin Han,Bing Li,Dawei Li,Feihu Li
EC impacts on struvite formation kinetics and purity were evaluated in BRs and FBRs. • HA and Cu + TC inhibit crystallization by surface-mediated interactions and Mg 2 ⁺ complexation. • Fluidized bed hydraulics mitigate kinetic inhibition and enhance pellet growth. • DFT reveals EC–Mg 2 ⁺ interactions are dominated by weak ion–dipole forces. • Ternary complexes bridged by Mg 2 ⁺/Cu 2 ⁺ are the most stable species in matrices. Struvite crystallization is a sustainable strategy for phosphorus (P) recovery, yet the presence of emerging contaminants (ECs) poses significant obstacles by disrupting struvite crystallization kinetics and compromising product purity and thus its potential agronomic safety. This study systematically investigates the impacts of tetracycline (TC), polyethylene terephthalate (PET), Cu 2 ⁺ , and humic acid (HA) on struvite formation using both batch reactors (BRs) and fluidized-bed reactors (FBRs). Batch experiments revealed that HA and Cu+TC act as potent inhibitors through a combination of surface-mediated interactions and Mg 2 ⁺ complexation, reducing the apparent crystallization rate of struvite. Conversely, FBR results demonstrated that specific hydraulic conditions can mitigate the kinetic inhibition of Cu+TC, yielding larger pellets (∼ 1342 vs ∼ 1138 μm in diameter) with apparent Cu 2 ⁺ incorporation into the pellet matrix. Trials with real swine wastewater verified that excessive dissolved organic matter and Ca 2 ⁺ favor the formation of amorphous phases rather than crystalline struvite (84.9% vs 2.7% in the amorphous fraction). Density functional theory calculations indicated that the Mg 2 ⁺ complexation is primarily governed by non-covalent ion–dipole (Mg–O) interactions between HA/TC with Mg 2+ . Besides, ternary complexes bridged by metal-O were identified as the most stable species (HA–Cu/Mg–TC) within these matrices, which may enhance the mobility or persistence of such ECs in aquatic environments. Consequently, robust P recovery requires integrated strategies—combining pre-treatment to remove strong inhibitors with specific FBR conditions (hydraulics and extended retention time) that leverage crystal growth and conglomeration. This work provides the kinetic and mechanistic insights necessary for developing such integrated solutions, advancing our understanding of EC-mediated crystallization of struvite and the viability of P recovery from increasingly complex waste streams. Download: Download high-res image (115KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2026
·Vol. 37
·期 7
·e70696
·
IF 3.8
Yue Su,Yanchao Cai,Daiwei Zeng,Na Wen,Tengfei Lin,Fang Wang
This study developed a flexible strain sensor based on a novel polydimethylsiloxane (PDMS)-based conductive nanofiber composite (CNC) featuring a multi-scale three-dimensional (3D) conductive network to overcome the limitations of conventional PDMS films, including low sensitivity and insufficient stretchability. Using electrospinning, PDMS was blended with spinnable thermoplastic polyurethane (TPU) and conductive carbon black (CCB) to fabricate flexible nanocomposite fibers with good stretchability and sensitivity. Subsequently, a mesoscopic 3D conductive network was constructed by loading CCB and carbon nanotubes (CNTs) onto the fiber film surface. This surface network connects with the 3D conductive network formed by CCB within the fiber matrix, ultimately producing a PDMS-based conductive CNC with a multi-scale 3D conductive architecture. This multi-scale structure endows the composite with a wide strain sensing range and fast response (208 ms), while improving tensile strength (3.89 MPa). The material exhibits robust durability under cyclic loading. The resulting wearable sensor possesses good skin affinity and effectively monitors various physiological motions, including joint movements and laryngeal vibration, demonstrating considerable potential for wearable electronics.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Qiu-Yu Peng,Meng Wang,Song Chen,Long-Hua Zou,Yun-Cheng Li,Fan-Bing Meng
PAC@PHZ-II exhibits a distinct color change for different pH values and ammonia. • Bilayer film's low water vapor transmission rate aids food preservation. • PAC@PHZ-II strongly inhibited S. aureus , E. coli , and L. monocytogenes . • PAC@PHZ-II effectively indicate fresh pork and spoiled pork. A PAC@PHZ-II bilayer film composed of polyvinyl alcohol/carboxymethyl konjac glucomannan/alizarin as the sensor layer and poly(3-hydroxybutyrate- co -3-hydroxyvaleric acid)/nano-ZnO as the antibacterial layer was developed using electrospinning technology for meat preservation and freshness perception. Structure analyses revealed that there are interactions between the sensor layer and antibacterial layer. The bilayer film has a lowest water vapor transmission rate of 26.03 ± 0.21 g·m −2 ·h −1 , and the tensile strength and elongation at break are approximately 150% and 290% higher than those of single-layer films, respectively. The bilayer film is sensitive to pH and ammonia, exhibiting visible color changes from yellow to purple. Antibacterial test indicated the dual functional film had strong antibacterial activity against Staphylococcus aureus , Escherichia coli and Listeria monocytogenes . Pork packaged with the film exhibits a 3 days shelf-life extension, and the color changed when meat freshness decreases, suggesting a potential use in preserving and monitoring pork freshness. Download: Download high-res image (236KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Asia-Pacific Journal of Chemical Engineering
·
2026
·
IF 1.7
Shanjun Xu,Bing Xia,Penghang Yan,Deqing Kong,Dong Li
Metal corrosion causes significant economic losses and safety hazards, underscoring the urgent need for effective, environmentally friendly corrosion inhibitors. In this study, an organic–inorganic composite inhibitor, chitosan–glucose–BN (CS–GL–BN) was developed to protect Q235 mild steel in a 3.5-wt% NaCl solution. The inhibitor was synthesized by first reacting chitosan (CS) with glucose (GL) via a Schiff base reaction between the amino group of CS and the aldehyde group of GL, followed by the incorporation of hydroxylated boron nitride (OH-BN). Electrochemical measurements demonstrated an inhibition efficiency of 89.8% at 200 ppm after 72 h immersion, which was markedly higher than those of pure CS (64.3%) and the CS–GL intermediate (75.8%). The water contact angle on the steel substrate increased to 91.1°, indicating enhanced hydrophobicity, while the surface roughness was reduced to 0.694 μm (compared with 5.318 μm for bare steel). These combined surface modifications effectively hindered the penetration of corrosive agents. Molecular modeling studies further revealed that the N/O heteroatoms contributed to strong adsorption, thereby significantly blocking the access of corrosive species. This work presents a synergistic strategy in which CS is functionalized with a long-chain molecule (GL) and integrated with BN to form a hybrid corrosion inhibitor that exhibits high efficiency and improved sustainability.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Bingbing Liu,Suying Dong,Peiying Li,Shengpeng Su,Wenjuan Wang,Shuzhen Yang,Yanfang Huang,Hu Sun,Guihong Han
Indium (In) is a typical critical metal, and the recycling of waste In-Tin oxide (ITO) target can alleviate the In resource supply scarcity. The dismantling and preprocessing of waste ITO targets inevitably introduce metallic impurities, posing significant challenges for In recovery, particularly the separation of In from Sn and the removal of other impurities. This study developed an integrated hydrometallurgical process to prepare high-purity nano-In 2 O 3 from high-impurity waste ITO, highlighting on the leaching and separation mechanisms of In, Sn, Al, and Mo. The process consists of HCl leaching for Mo separation, selective sulfide precipitation for In/Sn separation, TOA/TBP synergistic extraction for In/Al separation, and calcination for nano-In 2 O 3 preparation. Under optimal conditions, HCl leaching extracted over 94% of In, Sn, and Al while selectively suppressing Mo dissolution to below 13%. The HCl leaching, sulfide precipitation, and solvent extraction mechanisms are also discussed in this study. The final In 2 O 3 product was 99.98% pure, with about 25 nm average particle size and 77.8% overall In recovery. This work provides an efficient route for high-purity nano-In 2 O 3 production from high-impurity wastes.
✓ 已验证
产品关联
DOI
高影响因子
Aggregate
·
2026
·Vol. 7
·期 7
·e70404
·
IF 14.5
Luping Lu,Xiaorui Zhou,Yi Sheng,Ben He,Lei Yang,Ziyin Wang,Hongfeng Mu,Tiantian Ni,Chujun Ni,Qian Zhao,Di Chen,Ning Zheng
Liquid crystal elastomers (LCEs) have emerged as attractive soft actuators capable of undergoing large and reversible actuation. Their potential for practical applications, however, has been fundamentally constrained by an intrinsic trade-off: the chain flexibility required for reversible actuation inherently restricts molecular design toward achieving high mechanical strength and toughness. Here, we report a phase separation strategy that yields an LCE with a tensile strength of 92 MPa and toughness of 247 MJ m −3 . This leads to 20-fold and 40-fold improvements compared with conventional LCEs without sacrificing their reversible actuation. Mechanistically, this superior mechanical performance is enabled by the incorporation of rigid polyamide acid segments into the network. During network formation, these segments self-assemble into phase-separated nanostructures that function as in situ-generated nanofillers, reinforcing the material and endowing it with outstanding work capacity. Our work suggests that leveraging microphase separation substantially broadens the design space for high-performance LCE actuators, paving the way toward mechanically robust and efficient soft actuation systems.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Yu Li,Xiangyu Zhu,Zhuolong Guan,Zongming Zuo,Xinghe Zhang,Jiaojiao Yin,Pan Gao
Oleogelation is a pivotal strategy for replacing trans and saturated fatty acids. However, systematic comparisons of distinct gelation mechanisms within a single lipid system, particularly concerning long-term storage stability, remain scarce. This study employed Camellia oil as a model system to compare oleogels structured by three distinct categories of oleogelators, namely crystalline particle-type (beeswax, carnauba wax, and candelilla wax), a fiber network (β-sitosterol/γ-oryzanol), and a polymer network (ethyl cellulose). Fourier transform infrared spectroscopy confirmed that physical crosslinking was the predominant gelation mechanism. The β-sitosterol/γ-oryzanol system formed a dense, rigid hydrogen-bonded network with the highest oil binding capacity (OBC, 99.89%) and hardness (3052.02 g). Despite these superior properties, this rigid structure also led to brittle fracture and markedly inferior oxidative stability over six weeks, as indicated by elevated peroxide value and thiobarbituric acid reactive substances. Conversely, wax-based oleogels exhibited moderate hardness and OBC but showed exceptional oxidative stability and complete structural reversibility across tested temperatures (20, 4, and −18 °C). The ethyl cellulose system underperformed across all parameters at the tested concentration. This study reveals an inherent trade-off between mechanical performance and oxidative stability. Fiber networks are suitable for high-strength applications, while crystalline networks ensure superior long-term oxidative stability. By revealing this trade-off, these findings establish a framework for the rational design of lipid substitutes and the targeted selection of oleogelators.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Qi Chen,Zefeng Yang,Yueling Chen,Jionghua Wu,Jimmy C. Yu,Ling Wu
The fabrication of single atoms on MIL-125(Ti) for photocatalytic ammonia synthesis. • SAs modulate the local electronic structure for charge mobility and separated active site. • The favorable N 2 activation and protons supply optimizes the reduction kinetics. • Magnetic field-induced spin flipping to charge utilization further boost the activity. Photocatalytic nitrogen fixation is an attractive alternative to the energy-intensive traditional ammonia synthesis. However, the major challenge is that most photocatalysts are limited by their low charge mobility, insufficient molecules activation and sluggish reaction kinetics. Herein, we integrated single atoms (Co, Fe, Ni) on MIL-125(Ti) functionalized with sulfhydryl (MIL-125(SH) 2 , MTS) to afford Co-MTS, Fe-MTS and Ni-MTS for photocatalytic nitrogen reduction. Through uniformly dispersed SAs (single atoms) coordinated with O and S atom, such intimate interaction and charge redistribution can efficiently regulate the unsaturated Ti sites for N 2 adsorption and activation. Moreover, the introduced SAs species also serve as separated active center for water oxidation to promote H 2 O adsorption and protons release, kinetically optimizing protons supply and energy barrier of rate rate-determining step for N 2 hydrogeneration. Benefited from the spatially separated metal node-SAs dual sites and favorable reaction energy barrier, the optimized Ni-MTS sample shows an ammonia yield rate of 72.6 μmol·g −1 ·h −1 with an apparent quantum efficiency of 0.49% at 400 nm. This can be further enhanced by magnetic field-induced spin flipping contributed to charge utilization. This work would inspire the development of other high-efficiency single atom/MOFs that combining molecular activation and protons supply for photocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·Vol. 143
·期 34
·e70966
·
IF 3.1
Qi Qianqian,Zhu Fuhao,Zhang Mingyu,Wang Qingguo
The degradation behavior of poly(lactic-co-glycolic acid) (PLGA) under natural seawater conditions has been less systematically described than that in buffered laboratory media. In this study, PLGA copolymers with different lactic acid/glycolic acid (LA/GA) ratios were prepared at two molecular-weight levels and immersed in natural seawater. Water uptake, mass retention, molecular weight changes, glass transition temperature ( T g ) changes, and surface morphology were analyzed. PLGA-9010 exhibited limited hydration, modest T g variation, and relatively slow molecular-weight reduction, whereas PLGA-5050 showed pronounced T g depression toward seawater temperature accompanied by accelerated molecular-weight decay and earlier surface disruption. PLGA-7030 displayed intermediate behavior. Within the investigated molecular weight range, lower molecular weight samples showed slightly faster decreases in molecular weight and T g during the early stage of immersion; however, the relative degradation behavior among different PLGA compositions remained unchanged. These results provide comparative information on the degradation behavior of PLGA copolymers with different compositions and molecular weights under natural seawater conditions.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE CHINESE CHEMICAL SOCIETY
·
2026
·
IF 2
Kwang I. L. Wi,Ri Myong Kim,Tae Hun Ryo,Song Chol Ri,Yong-Hwan Han,Su Jin Ju
Monochloroacetic acid (MCA) is a pivotal intermediate in agrochemicals and pharmaceuticals, but its industrial synthesis via acetic acid chlorination faces challenges related to selectivity and reaction time. This study investigates the kinetics of gas–liquid heterogeneous acetic acid chlorination using elemental sulfur as a catalyst precursor to establish a scientific basis for process optimization. A consecutive-parallel reaction mechanism was proposed incorporating acetic acid consumption, acetyl chloride conversion, MCA formation, and dichloroacetic acid (DCA) formation. Kinetic parameters were determined at 353, 363, 373, and 383 K in a steel bubble column reactor with fixed initial sulfur concentration (1.92 mol/L) and Cl 2 space velocity (4.028 L L −1 h −1 ). The activation energy for DCA formation (87.55 kJ mol −1 ) was substantially higher than that for MCA accumulation (52.40 kJ mol −1 ). Relative rate analysis revealed that k 3 / k 4 decreases continuously from 1.83 at 353 K to 0.76 at 383 K, confirming that lower temperatures favor MCA selectivity. The proposed kinetic model showed excellent agreement with experimental data ( R 2 > 0.98). Based on the kinetic analysis, three optimization strategies were derived: maintaining high acetic acid concentration, dynamic adjustment of Cl 2 feed rate, and implementation of a decreasing temperature–time profile. This work provides a scientific basis for optimizing industrial MCA synthesis using low-cost sulfur as a catalyst precursor.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Zhilong Zhu,Hongxiang Ou,Honglai Xue,Fang Zhu
To enhance the oil–water separation performance and stability of melamine sponge (MS), stearic acid-grafted attapulgite (SA-g-OATP) was synthesized via silanization and amidation grafting. The hydrophobic sponge (MS-POS) was fabricated by dip-coating MS in a polydimethylsiloxane (PDMS) solution containing SA-g-OATP. Characterization confirmed a grafting rate of 20.73%. The synergy between SA-g-OATP and PDMS constructed a hierarchical “micron skeleton-nanoparticle” rough structure. The optimal sample, MS-POS1-1, exhibited superhydrophobicity with a water contact angle of 159.34° and achieved high adsorption capacities for oils and solvents, reaching 112.33 g/g for palm oil. In gravity-driven tests, it showed separation efficiencies above 98.34% for oil–water mixtures and effectively separated water-in-oil emulsions. The sponge demonstrated robust stability, retaining hydrophobicity after 40 cycles of tape-peeling or sandpaper abrasion, and withstanding prolonged immersion in pH 2–12 solutions. The adsorption capacity remained above 89.70% after 20 consecutive adsorption-extrusion cycles. Developed from low-cost materials via a simple process, MS-POS exhibits high adsorption capacity, excellent selectivity, and robust stability, showing significant potential for oily wastewater remediation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Yuan Sun,Jie Wu,Yue Zhang,Linjing Liu,Jinpeng Ma,Yulin Yang,Bin Yang
BaTiO 3 -based piezoelectric ceramics have emerged as highly promising candidates for various applications, due to their excellent piezoelectricity. In this work, the [001] C textured Ba 0.97 Ca 0.03 Ti 0.96 Sn 0.04 O 3 piezoelectric ceramics were synthesized using the templated grain growth (TGG) method with the assistance of ZnO and Li 2 O. The effects of ZnO and Li 2 O on microstructure evolution, phase structure, texture development and piezoelectric properties were investigated systematically. Both ZnO and Li 2 O exhibit a pronounced promoting effect on oriented BCTS grain growth, enabling the achievement of a high texture degree F 001 of 98% at a relatively low sintering temperature of 1325 °C. The highly textured BCTS ceramics with Li 2 O exhibit to a substantial enhancement in piezoelectric performance: maximum strain S m , the piezoelectric coefficient d 33 and the figure of merit d 33 · g 33 reach 0.25%, 576 pC/N and 28.7 × 10⁻¹ ² m²/N, respectively. The highly preferred [001] C orientation, coexistence of O + T phases, and optimized ferroelectric domain structure synergistically contribute to the significant piezoelectric property enhancement. These results demonstrate the great potential of environmentally friendly textured BCTS-based ceramics for applications in piezo-sensors and energy harvesters.
✓ 已验证
产品关联
DOI
高影响因子