ADVANCED FUNCTIONAL MATERIALS
·
2026
·Vol. 36
·期 60
·e76787
·
IF 19.9
Ning Liu,Jialin Tan,Zihui Huo,Hongyang Zhao,Bin Zhu,Lichun Wang,Wenji Guo,Feifei Wang,Jiakuan Yang,Liang Huang
Creating specific surface patterns on water purification membranes can effectively mitigate the prevalent fouling problem during water treatment. However, current patterning methods face practical challenges in achieving both tunable nanopores and designable surface patterns at the selective layer of the membrane. Here we report an ice-confined phase separation (IC-PS) strategy, in which the patterned ice melts and rapidly initiates the phase separation of the polymer solution, to form a patterned nanoporous selective layer. The pore size of the patterned IC-PS membranes can be facilely tuned from 92 to 36 nm. The patterns on the IC-PS membrane significantly improve the pure water permeance by 79% while keeping almost the same solute rejection as the flat IC-PS membrane. In cyclic fouling evaluations for 90 h, the patterned IC-PS membrane exhibits a lower flux decline ratio and a higher flux recovery ratio than its flat analogue. Computational fluid dynamics simulations confirm that the surface pattern-enhanced vortices and shear stress effectively reduce foulant deposition and mitigate membrane fouling. Moreover, the IC-PS method can be applied for multiple membrane materials, and various microstructures, such as fingerprint, lotus leaf, and fish scale, can be easily replicated to the membrane surface at high fidelity.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2026
·
IF 5.7
Van-Hien Pham,Nguyen Quang Tu Le,Bich-Ngoc Duong,Tran Duy Tap,Ngoc-Quyen Tran,Van-Phuc Dinh
Electron beam (EB) irradiation successfully shifted ETS-10 zeolite from a microporous to a mesoporous framework. • XRD and SEM confirmed crystalline framework and morphology remained stable under EB radiation up to 1000 kGy. • 1000 kGy dose expanded pore size to 8 nm and increased the specific surface area to 333 m 2 /g. • Modified mesoporous structure improved ion diffusion, yielding high capacities of 878.16 mg/g for Pb(II) and 181.69 mg/g for Cu(II). • Adsorption behaviour followed the Sips model, indicating a hybrid multilayer-to-monolayer transition on a heterogeneous surface. ETS-10 zeolite is known for its superior adsorption properties and high ion-exchange capacity, making it suitable for applications in adsorption. While the pristine ETS-10 framework possesses inherent acidic sites and a unique crystalline structure, its performance is often limited by its purely microporous nature. This study investigated the modification of ETS-10 using electron beam (EB) irradiation to enhance its capacity for removing Pb(II) and Cu(II) ions from aqueous solutions. Our results demonstrated that EB irradiation was a highly effective method for inducing a structural transition from microporous to mesoporous without compromising the structure of ETS-10 zeolite. Under EB irradiation dose of 1000 kGy, the specific surface area of ETS-10 increased to 333 m 2 /g, the pore size expanded to 8 nm, and the adsorption reached 878.16 mg/g for Pb(II) and 181.69 mg/g for Cu(II). The adsorption data for both pristine and irradiated samples were best described by the Sips isotherm model, suggesting a hybrid adsorption behaviour on a heterogeneous surface that transitions from multilayer at low concentrations to monolayer at higher concentrations. Treating titanosilicate ETS-10 with 1000 kGy electron beam (EB) irradiation significantly improved its cyclic reusability across five consecutive adsorption-desorption runs. These findings highlight the potential of EB irradiation as a powerful tool for tailoring the porosity of titanosilicate for advanced environmental remediation. Download: Download high-res image (127KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·Vol. 36
·期 63
·e77025
·
IF 19.9
Xuan Weng,Peilin Li,Chenyang Jia,Xinkai Guo,Wen Sun,Hai Jiang
Flexible sensors are evolving from single-parameter to multi-modal measurement. Dual-modal flexible tactile sensors capable of detecting both temperature and pressure are essential for human–machine interaction and wearable health monitoring. Here, we present a flexible dual-modal sensor constructed from a sponge framework decorated with MXene–Ag 2 Se nanocomposite. The heterogeneous MXene–Ag 2 Se interfaces enhance carrier transport and conductivity. A three-electrode configuration with spatially separated in-plane thermoelectricity and out-of-plane piezoresistivity enables effective decoupling of temperature and pressure sensing. The MXene–Ag 2 Se@sponge sensor demonstrates high pressure sensitivity (2.202 kPa − 1 in 0–25 kPa, 0.466 kPa − 1 in 25–60 kPa, and 0.076 kPa − 1 in 60–300 kPa), a fast response time (37 ms) for pressure sensing, and excellent durability. For temperature sensing, it achieves an ultralow detection limit of 0.2 K, a high Seebeck coefficient of 175.47 µV/K, and stable cycling performance. In addition, the MXene–Ag 2 Se@sponge dual-modal sensor is applied to human pulse monitoring, joint motion detection, and finger temperature measurement, highlighting its potential for wearable biomedical sensing. Furthermore, a sensor array was also implemented as electronic skin, enabling simultaneous temperature-pressure mapping with high spatial resolution. This work provides a promising strategy for intelligent robotics and flexible electronics.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Shu-Dan Ge,Xin Li,Min Jiang,Shi-Huan Tan,Xian-Yue Xiang,Si-Si Wang,Hai-Bo Zhao,Li Chen,Bo-Wen Liu,Yu-Zhong Wang
Filler-free hydrogen-bond engineering enables electroactive phase regulation in PA11. • Competitive H-bonding promotes α -to- δ′ phase transition. • PA11/DMHD7 exhibits ∼3× increase in voltage and current output. • Linear pressure-dependent output enabling wearable motion sensing applications. Polyamide 11 (PA11) is an attractive bio-based electroactive polymer for flexible piezoelectric devices because of its mechanical compliance, facile processability, and inherent polarity. However, its piezoelectric performance is still limited by the insufficient content of electroactive phases and the strong intermolecular hydrogen-bonding constraints that govern chain packing. Herein, we propose a mild and filler-free small-molecule modulation strategy that reconstructs the hydrogen-bond network of PA11 with hydroxyl-bearing modifiers to steer its crystallization pathway toward electroactive phases. Using 2,5-dimethyl-2,5-hexanediol (DMHD) as a typical hydroxyl-bearing modifier, we show that DMHD can competitively hydrogen-bond with PA11 amide groups, loosening native interchain constraints and promoting the transition from the weakly electroactive, antiparallel α phase to the electroactive δ′ phase. Benefiting from the synergistic optimization of crystal structure and intermolecular interactions, the PA11/DMHD composites exhibit markedly enhanced piezoelectric output performance. In particular, the optimized PA11/DMHD7-based device delivers an open-circuit voltage of 13.05 V and a short-circuit current of 404 nA, approximately three times higher than those of pristine PA11, shows a stable linear response in the 1–5 N range, and maintains reliable output over 1800 loading cycles. Meanwhile, the device demonstrates practical applicability in human-motion monitoring and pressure sensing. This work provides a mild, scalable and filler-free strategy for crystal-phase engineering and performance optimization of polyamide-based piezoelectric polymers, offering promising prospects for wearable electronics and self-powered devices.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Guang Zhao,Dongfang Lv,Chang Liu,Changxu Wu,Yifei Liu,Caili Dai,Huazhou Li
Channeling during viscosity reducer flooding in heterogeneous heavy oil reservoirs limits sweep efficiency, while conventional non-selective agents often plug oil-rich zones. To address this, a novel modified petroresin particle (MPRP) with oil–water selectivity was synthesized via graft copolymerization of 2-acrylamido-2-methylpropanesulfonic acid (AMPS) onto dicyclopentadiene-based resin (DCPD). Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the successful incorporation of hydrophilic groups while retaining the oil-soluble backbone. MPRP exhibits excellent oil solubility (>84%) and aqueous dispersibility. Under reservoir conditions, temperature and mineralization trigger a 3.6–6.6-fold particle size increase via cohesive expansion, inducing selective plugging in high-permeability water channels to control channeling, while spontaneous dissolution in oil prevents formation damage. Systematic core flooding established the optimal adaptation threshold: 0–50 000 mg/L, 60°C–90°C, 0.1–3.0 D, in situ oil viscosity 1875 mPa·s, and permeability contrast 4.22–11.96. Field-recommended injection parameters increased cumulative recovery from 28.32% to 57.54% in 1.0 D. NMR and micro-visualization revealed that MPRP selectively plugs high-permeability channels, diverting subsequent fluid into low-permeability regions without injectivity impairment. The field test of MPRP achieved effective water production suppression and oil production enhancement, leading to an incremental oil production of 65.22 tons. This work establishes MPRP as a promising agent for conformance control in heavy oil production.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2026
·
IF 5.9
Weixiong Zhang,Hao Zhang,Baiyi Chen,Yunhao Xia,Baoxin Wang,Jianhua Wu
Increasing TA2 roughness induces a non-monotonic trend in barnacle settlement • Moderate roughness promotes exploration and protein deposition to enhance settlement • Excessive roughness triggers rapid settlement but limits pheromone dispersal • Surface roughness regulates cyprid settlement even in the presence of biofilm . The widespread use of titanium in marine structures is hindered by its susceptibility to biofouling. As a promising antifouling approach, the rational design of direct surface modification relies on a fundamental understanding of how surface properties regulate the settlement of fouling organisms. Herein, this study investigated the effect of TA2 titanium surface roughness on the settlement process of barnacle cyprids. Increased roughness enhanced the temporary attachment of cyprids through sacrificial bonds and mechanical interlocking of deposited footprint proteins. A moderate roughness increase facilitated more surface exploration and footprint protein deposition, thus likely enhanced the distribution of settlement-inducing protein complex (SIPC, a key settlement pheromone), thereby increasing the final settlement ratio. In contrast, excessive roughness enabled cyprids to locate favorable settlement sites with minimal surface exploration, leading to localized surface inspection, increased footprint protein area, and reduced coverage, which may lead to a concentration-dependent avoidance response and reduced cyprid-protein contact probability, resulting in a plateau in the settlement ratio. Field experiments further confirmed that direct cyprid-substrate contact is a prerequisite for firm settlement even in the presence of biofilm, consistent with the mechanistic insights obtained from laboratory assays. These findings elucidate roughness-dependent exploration strategies of barnacle cyprids and provide a theoretical basis for designing antifouling TA2 for marine applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Yiyue Tao,Chen Hua,Nan Li,Yan Wang,Zhaosen Yuan,Yibing Ma,Tangzhen Guan,Yijiang Chen,Huili Zhang,Cai Cheng,Minghui Guo,Lei Wang,Jing Liu
Rechargeable aluminum batteries (RABs) are promising for stationary energy storage due to their intrinsic safety, low cost, abundance, and use of non-flammable chloroaluminate ionic liquid electrolytes. However, aluminum anode instability from dendrite growth and corrosion limits cycle life. This study presents a facilely fabricated Al 20 -LM-Ti composite anode, featuring a structure where aluminum microparticles are semi-embedded in EGaIn. This design not only resists electrolyte corrosion but also utilizes the fluidic nature of the EGaIn to suppress the outward growth of aluminum dendrites. Furthermore, by providing a crystallographic orientation similar to that of the subsequently deposited layer and offering higher adsorption energy for reactive ions, this anode enables uniform aluminum deposition while enhancing interfacial ion transport and diffusion. Consequently, the assembled Al 20 -LM-Ti//Al 20 -LM-Ti symmetric cell achieves stable cycling for over 2200, 3000, and 1600 h at high current densities of 1, 2, and 3 mA cm −2 , respectively. Leveraging this structurally robust anode, a full Al 20 -LM-Ti//graphite cell operates stably for over 39 000 cycles at 1.5 A g −1 . Extreme tests under heavy striking, mechanical cutting, and burning reveal its outstanding reliability. This work holds significant implications for realizing high-performance RABs and offers a promising strategy for anode development in other battery systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DESALINATION
·
2026
·
IF 9.9
Xin Shi,Qiuyan Bi,Zizhen Peng,Zhicheng Wang,Yakai Lin,Wenzhong Ma,Chuanjie Fang,Chao Zhang,Shiai Xu
In situ SiO 2 growth with DA-g-C 3 N 4 co-doping yields hybrid crosslinked PA layer. • Compound strategy mitigates DA-g-C 3 N 4 aggregation in PA layer. • Achieved simultaneous gains in Mg 2+ /Li + selectivity and permeability performance. • MgCl 2 rejection stayed >93% over 160 h, demonstrating excellent long-term stability. It is often difficult for thin-film composite (TFC) nanofiltration (NF) membranes to balance high separation selectivity and high permeability, and the contradiction between the two will lead to their overall performance constraints. In this study, a dual-phase regulation strategy is proposed, which adopts the in-situ sol method and the composite strategy of introducing two-dimensional materials for the preparation of organic-inorganic cross-linked polyamide (PA) NF membranes. A trimesoyl chloride (TMC) organic phase solution containing tetraethyl orthosilicate was first introduced onto the polyethersulfone (PES) substrate, followed by contact with a polyethyleneimine (PEI) aqueous phase solution containing dopamine-functionalized carbon nitride (DA-g-C 3 N 4 ), during which silicon dioxide (SiO 2 )/Si–O–Si domains were generated in situ within the PA layer. These domains restricted the free volume of the PA layer, narrowed the effective pore-size distribution, and suppressed nonselective defects, while the embedded DA-g-C 3 N 4 improved the compatibility between the nanofillers and the PA layer, thereby producing P-1Si-0.025CN membranes with an effective pore size of 0.4 nm. Compared with the P-NF membrane prepared by reverse interfacial polymerization of TMC and PEI directly on the PES substrate, Mg 2+ /Li + separation factor (SF) increased to 67.2 (Mg 2+ /Li + mass ratio is 20), salt solution flux was 27.1 LMH, separation and permeation capacity of mixed salt was enhanced, salt solution flux has increased by 4 times, and the SF has increased by 7 times, Mg 2+ /Li + ratio decreased from 20 in feed to 0.71 in permeation process. Moreover, it exhibited excellent separation performance in diluted salt lake brine, with an Mg 2+ rejection rate exceeding 98%, and it also exhibited high fouling resistance and long-term stability. Download: Download high-res image (155KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Processes
·
2026
·Vol. 14
·期 14
·2350
·
IF 3.4
Hui Xu,Shuhua Wang,Ningbo Zhe,Weidong Xiong,Jinqing Wang,Tao Lu,Hui Zhao
To reveal the wear mechanisms of high-temperature metallic materials under particle erosion, this study investigated TP347 steel using a single-particle erosion–oxidation in situ system, off-axis digital holographic microscopy (DHM), granular erosion testing, and finite element modelling. Compared with conventional ex situ SEM or 3D profilometry, DHM provides crater-scale three-dimensional quantification of pit mouth diameter, crater depth, and crater volume. Under single-particle impact at 400 °C, the crater morphology changed from a wide and shallow profile at 30° to a deeper and more symmetric indentation at 90°, while the fitted velocity exponent increased from approximately 0.36 to 0.94 with increasing impact angle. Under normal impact, increasing the pre-oxidation temperature from 400 to 600 °C increased oxide-film thickness and crater depth and strengthened the velocity dependence of erosion. Granular erosion showed a staged process in which initial oxide-film removal was followed by a more stable substrate-involved erosion stage after the accumulated erodent mass approached 60 g. Finite element results reproduced the transition from tangential-shear-dominated damage at low angles to normal-impact-induced plastic indentation and oxide-film cracking at high angles. These results clarify the coupled role of impact angle, velocity, temperature, and oxide-film response in the high-temperature erosion behavior of TP347 steel.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER COMPOSITES
·
2026
·
IF 4.9
Han Ye,Hua Ma,Xiaowang Zhang,Liping Chen,Xinyao Xu,Luoxin Wang,Hua Wang,Siwei Xiong
High-performance aramid insulating paper that simultaneously combines mechanical robustness, dielectric strength, and environmental durability is highly desirable, yet remains difficult to realize because weak interfiber adhesion and loose network structures in conventional poly (p-phenylene terephthalamide) (PPTA) paper fundamentally limit stress transfer and electric-field regulation. Here, inspired by the interwoven architecture of natural rattan stems, a winding-interlocked PPTA/polyarylate (PAR) nanocomposite insulating paper is engineered by integrating thermally reprocessable PAR nanofibers with a heat-activated interfacial fusion strategy. The PAR nanofibers act as nanoscale binder-reinforcers that bridge adjacent PPTA fibers, while strong interfacial coupling, governed by hydrogen bonding and π-π stacking, promotes structural densification, suppresses space-charge accumulation, and homogenizes the local electric-field distribution. This biomimetic multiscale architecture enables the simultaneous optimization of mechanical load transfer and dielectric insulation. At a PAR loading of 30 wt%, the composite paper achieves a breakdown strength of 130.3 kV/mm and a tensile strength of 39.124 MPa, which are approximately 4.8 times and 1.9 times higher than those of commercial aramid paper, respectively. Notably, the paper retains excellent dielectric performance even after thermal aging, UV exposure, and repeated folding/deformation, demonstrating outstanding weather resistance and mechanical reliability. This work provides a scalable strategy for designing next-generation aramid-based insulation papers for electrical insulation applications under harsh conditions. Highlights Polyarylate nanofibers exhibit secondary thermoprocessing characteristics. Nanocomposite insulation paper design via entangled-interlocked fiber networks. Excellent dielectric properties and extreme-condition tolerance. Achieved 130.3 kV/mm breakdown strength in nanocomposite paper. Dual-network interlocking architecture suppresses charge accumulation and field distortion.
✓ 已验证
产品关联
DOI
高影响因子
ACTA MATERIALIA
·
2026
·
IF 10.7
Jian Hui Jia,Li Bo Chen,Yuan Chen,Xu Wang,Guo Yong Wang,Hong Zhang,Chun Cheng Yang,Qing Jiang
Alloying represents an effective approach to ameliorate the sodium storage performance of bismuth (Bi)-based anodes, primarily through static improvement in conductivity and buffering capability. However, the dynamic regulation of kinetics in the intermediate process remains largely unexplored. Guided by theoretical calculations, this work proposes a synergistic catalytic-buffering strategy that integrates intermetallic NiBi 3 with a nitrogen-doped carbon (NC) matrix to actively modulate the Bi alloying reaction. The NC matrix provides a fundamental conductive and protective scaffold, while NiBi 3 accounts for additional kinetic and structural improvements. As a pseudo-catalyst component, Ni not only restructures the Bi lattice to promote electron/ion transport and accelerate the initial Na-Bi alloying stage, but also enhances Na + adsorption and reduces the alloying barrier in subsequent Na-NaBi reaction. Meanwhile, the dynamically generated Ni framework, together with the NC scaffold, effectively accommodates volume variation throughout the alloying process. Thanks to this cooperative material design, the NC-encapsulated NiBi 3 composite (NiBi 3 @NC) achieves exceptional rate performance up to 50 A g⁻ 1 , a record-long lifespan over 36,000 cycles, as well as excellent cyclability and fast-charging capability even at -30 °C. In-situ X-ray diffraction and electrochemical impedance analyses unravel the underlying Na + storage mechanisms and provide critical insights for the development of advanced alloy-based anode materials. A synergistic catalytic-buffering strategy is proposed to improve the sodium storage performance of bismuth anodes through intermetallic engineering. The incorporated Ni dynamically behaves as a pseudo-catalyst to optimize Na + adsorption and reduce alloying barriers, while providing continuous buffering against volume changes. The designed NiBi 3 @NC anode achieves exceptional performance, offering a new paradigm for advanced alloy-based materials. Download: Download high-res image (513KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2026
·Vol. 16
·期 14
·889
·
IF 4.8
Limeng Lei,Jian Yang,Dongran Song,Runxin Chen,Liqing Liao
Lithium-ion batteries are widely used in digital, power and energy storage fields due to their high capacity and high cycle life advantages. This paper systematically screens the formulation system and designs a high-efficiency production line that can effectively improve production efficiency, reduce production costs, and lower energy consumption per unit product. The produced nano-silicon-enhanced graphite anode material has excellent performance. The selection of silicon raw materials, types of solvents, types of dispersants, and grinding processes is studied to investigate the influence of these four factors on the wet grinding process for preparing nano-silicon. Finally, metal silicon obtained by air flow pulverization is selected as the raw material, isopropanol is used as the solvent, FA01 (carboxylic acid type) is used as the dispersant, and a two-stage wet grinding process is adopted to prepare the nano-silicon dispersion solution. Zirconia beads of 0.5 mm and 0.2 mm size are used as the grinding media for the first and second stages, respectively, with filling rates of 80% and 90%, respectively. The final prepared nano-silicon dispersion is stable in dispersion and has a narrow particle size distribution. The nano-silicon dispersion solution and the multi-walled carbon nanotube dispersion solution are mechanically ground and mixed using a sand mill. At the same time, the multi-walled carbon nanotubes are coated with the nano-silicon. Then, artificial graphite is added for compounding. Finally, through spray drying, the Si@MWCNTs@graphite (SMG) nano-silicon-enhanced graphite negative electrode material is prepared. The SMG nano-silicon-enhanced graphite negative electrode material with a silicon content of 2% has a first Coulomb efficiency of up to 84.32%.
✓ 已验证
DOI
PubMed
高影响因子