PROGRESS IN ORGANIC COATINGS
·
2026
·
IF 7.9
Shaochen Wang,Jie Xu,Guoming Xue,Jie Zhao,Ling Li,Zhengran Yi,Guangxin Gu
Waterborne resins are widely recognized as eco-friendly alternatives to solvent-based systems. However, in many cases, their practical applications may still be hindered by insufficient adhesion to low-surface-energy substrates, poor water resistance, and inadequate corrosion protection. Furthermore, conventional silane coupling agents are typically oil-soluble and exhibit poor compatibility with some water-based resins, restricting their utility in such systems. To address these limitations, we developed a novel amphiphilic block -copolymer silane coupling agent (MPEG n -b-PBA m -APTES) for high-performance waterborne acrylic-polyurethane (APU) coatings. A well-designed amphiphilic block structure ensures uniform dispersion and compatibility within the aqueous matrix. Meanwhile, reactive silane groups form a robust Si–O–Si crosslinked network, significantly enhancing interfacial bonding with the substrate. By systematically optimizing the ratio of hydrophilic to hydrophobic segments and the additive concentration, we achieve significant enhancements in overall coating performance. Among all modified coating formulations, the APU11/22–10 sample demonstrated the optimal barrier performance, achieving a water absorption rate of only 4.7%. This value was 43.3% lower than that of the APU22/11–10 sample (8.3%) and represented a 42.0% reduction relative to the blank APU-0 coating (8.1%). Meanwhile, the APU22/11–10 system achieved a peak pull-off adhesion strength of 5.33 MPa, outperforming the blank sample (2.64 MPa) by 86.4% and substantially surpassing the values obtained for APU11/22–10 (4.16 MPa) and APU45/22–10 (3.21 MPa) in terms of interfacial bonding capacity. Furthermore, the modified coatings display enhanced mechanical hardness and thermal stability. Consequently, this amphiphilic silane modification strategy enables simultaneous improvements in adhesion, water resistance, corrosion protection, hardness, and thermal stability, presenting a highly effective approach for developing high-performance and eco-friendly waterborne coatings.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Liru Zeng,Zeyulin Zhang,Dinghe Liu,Zhuangjie Xu,Dazheng Chen,Yue Peng,Qian Feng,Yachao Zhang,Jincheng Zhang,Chunfu Zhang,Yue Hao
The interfacial configuration in oxide heteroepitaxy plays a critical role in determining the structural integrity and reliable performance of wide-bandgap heterostructures. Herein, we investigate the orientation-dependent epitaxial growth of high-quality NiO films on β-Ga 2 O 3 via mist chemical vapor deposition (Mist-CVD), exhibiting distinct epitaxial domain configurations depending on the substrate orientation. Combined experimental and density functional theory (DFT) analyses reveal that the synergistic interplay among surface energy, lattice mismatch, and crystal symmetry governs the epitaxial mode and crystalline quality across different substrate orientations. Benefiting from the high-quality epitaxy, the NiO films demonstrate good environmental stability, retaining 94% of their initial current after 30 days of ambient exposure. As a functional demonstration, the NiO/(001) β-Ga 2 O 3 p-n diode exhibits a low leakage current density (2.08 ×10 −8 A·cm −2 @-100 V) and a high breakdown voltage of 885 V, highlighting the critical role of epitaxial interface quality. This study provides mechanistic insight into orientation-regulated oxide heteroepitaxy and offers a viable materials strategy for constructing stable wide-bandgap oxide heterostructures.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Yang Wang,Cuilian Sun,Tianxing Wu,Xiujing Xing,Wei Xiong,Hao Li
The electrocatalytic nitrite reduction reaction (NO 2 RR) converts harmful nitrite in aqueous media into high value-added ammonia (NH 3 ) under mild conditions, representing a promising technology that integrates environmental remediation and green NH 3 synthesis. However, the NO 2 RR undergoes a complex process involving multi-electron/proton transfer steps. Cu-based catalytic systems are universally plagued by the inherent bottleneck of insufficient activity and selectivity, and these dual constraints can hardly be simultaneously overcome by single-element doping alone. Herein, we fabricated fluoride and cobalt co-doped Cu 2 (OH) 2 CO 3 nanosheet catalysts via a one-step hydrothermal method, where the synergistic effect between anionic and cationic dopants enables the simultaneous tailoring of the electronic structure and active site distribution of the material. Electrochemical test results demonstrate that F and Co co-doping can significantly boost the NO 2 RR catalytic performance of Cu 2 (OH) 2 CO 3 . The optimal F-3 sample achieves the highest NH 3 Faradaic efficiency (FE) of 96.47% with an NH 3 yield rate of 28.55 mg h −1 mg cat -1 at −0.8 V (vs. RHE) in 0.15 M NaNO 2 neutral electrolyte, showing a nearly 2-fold performance improvement over the undoped counterpart and outperforming most reported non-noble metal NO 2 RR electrocatalysts. This work provides a high-performance NO 2 RR electrocatalyst for neutral aqueous systems, and demonstrates that anion-cation synergistic doping can break the intrinsic performance bottleneck of Cu-based hydroxyl compounds, offering a valuable modification strategy for rational catalyst design towards electrocatalytic nitrogen-containing pollutant conversion.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL POLLUTION
·
2026
·
IF 7.2
Jing Zhou,Bo Zhao,Jie Liu,Junhan Ruan,Li Lin,Yi Li
N -nitrosomorpholine (NMOR), as a highly carcinogenic N -nitrosamine, has been widely detected in urban sewer systems. NMOR ranged from 27.2 to 817 ng/L in winter, follow by summer (2.09–453 ng/L), in raw wastewater collected from pumping stations connected to a Wastewater Treatment Plant (WWTP). Especially in winter, NMOR was detected (200–295 ng/L) in the influent, with residue of 98.0–116 ng/L in the effluent. Therefore, it is necessary to control NMOR before the WWTP. However, the corresponding precursors and transformation mechanisms in sewer systems are not yet fully understood. This study has identified NMOR precursors in sewer systems by nontarget analysis combined with targeted analysis. NMOR formation was confirmed by nitrosation and chloramination through distinct pathways from a known (morpholine, MOR) and two unreported ( N -methylmorpholine, NMM and N -methylmorpholine- N -oxide, NMMO) precursors. In addition, NMM and MOR were detected up to 8.65 and 14.3 μg/L in raw wastewater, as well as up to 0.250 and 1.17 μg/L in the effluent. NMOR formation by chloramine could reach to 73.0 ng/L. This study demonstrated the extensive presence of NMOR precursors in raw and treated wastewater, in which new identified precursor NMM might significantly contribute formation of NMOR.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Muhammad Ali Khalid,Jianbing Huang,Yong Yu,Xiaomeng Cheng,Xiuzhi Wu,Rana Moiz Ur Rehman,Zaheer Ud Din Babar,Youjun Lu,Jinzhan Su
Since the emergence of low-temperature solid oxide fuel cells (LTSOFCs) based on protonic semiconductor oxide electrolytes, H + /O 2− /e − triple-conducting layered Ni 0.8 Co 0.15 Al 0.05 LiO 2-δ (NCAL) has become a very successful electrode material due to its dual catalytic activities to hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR). However, the performance of semiconductor-based LTSOFCs is primarily limited by electrode polarization. Thus, enhancing the separation of electrons and protons at the electrode/electrolyte interface is vital. In this work, the NCAL symmetric electrode was modified with a triple-conducting perovskite Ba 0.875 Fe 0.875 Zr 0.125 O 3-δ (BFZ) to form a 3D heterostructure composite electrode for semiconductor-based SOFCs. The influence of composite composition on the electrochemical performance of NCAL-BFZ composite electrodes has been investigated, and the optimal performance was achieved by the composite electrode with 10 wt% BFZ (NCAL-BFZ10). The polarization resistance of the fuel cell based on a semiconductor CeO 2 electrolyte was recorded as 0.22 Ω cm 2 and 0.16 Ω cm 2 at 550°C for the NCAL symmetric electrode and the NCAL-BFZ10 composite symmetric electrode, respectively. Accordingly, the peak power density of the fuel cell employing the NCAL symmetric electrode reached 633 mW cm −2 , while the device with the NCAL-BFZ10 composite symmetric electrode exhibited superior performance, 873 mW cm −2 at 550°C. The success of modification strategy on NCAL electrode is attributed to enhanced charge separation. A proton-coupled electron transfer (PCET) mechanism is proposed to describe the separation of electron and proton in the whole cell, verified by Fourier Transform Infrared (FTIR), Distribution of Relaxation Time (DRT), isotopic fuel cells, proton-filtering fuel cell, and comparative polarization resistance and conductivity results in different atmospheres were performed. These results establish the NCAL-BFZ heterostructure composite as a promising symmetric electrode for low-temperature SOFCs.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Baoli Wang,Yuhang Zhang,Yijun Zhang,Yan Deng,Feng Yang
Uniform Co 3 O 4 nanoparticles with abundant active sites loaded on the N-doped graphite carbon was prepared. • Co 3 O 4 /NC based electrochemical sensor was fabricated to detect chloramphenicol in environmental samples. • The proposed sensor presents wider linear ranges and lower detection limit. Chloramphenicol (CAP), a typical broad-spectrum antibiotic, poses considerable threats to human health due to its residues transferring through the food chain. Thus, the development of fast and highly sensitive detection technologies for CAP is of great practical importance. Herein, a Co 3 O 4 @NC nanocomposite was prepared via a controllable thermal decomposition-oxidation approach. This composite was further employed as an electrode modification material to construct a novel electrochemical platform, which was designed for the quantitative detection of CAP. Characterizations revealed that Co 3 O 4 nanoparticles were wrapped in the carbon sheet in the prepared Co 3 O 4 @NC nanocomposite with a specific surface area of 285.5 m 2 /g, along with affluent oxygen vacancy active sites. Electrochemical performance measurements indicated that Co₃O₄@NC exhibits excellent electrocatalytic reduction activity toward CAP. Under optimized experimental conditions, differential pulse voltammetry (DPV) was employed to detect CAP, and the sensor emerged a linear detection range of 0.1–500 μmol/L with a low detection limit of 12.4 nmol/L, outperforming most electrochemical sensors for CAP reported in previous papers. Additionally, it owned good selectivity, as the relative standard deviation (RSD) of the CAP detection signal was less than 5% even as the other familiar interfering species were concomitant. It also demonstrated remarkable stability, repeatability, and anti-interference ability. When applied to the actual determination of CAP residues in environmental samples, the sensor yielded recovery rates of 97.02%–104.23% for marine sediment samples and 99.77%–104.06% for seawater samples, with all RSD values below 5.1%. This study realizes the structural and performance regulation of Co₃O₄ materials through a simple and feasible strategy, providing a new sensing platform for the rapid detection of trace CAP and offering novel insights into the application of metal oxides in electrochemical sensing fields. Download: Download high-res image (126KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Desalination and Water Treatment
·
2026
·
IF 3.4
Wei Liu,Jin Wang,Yan Hao,Qinghong Zhang,Kecun Ma,Mei Liu,Zhi Chen,Qingguo Chen
Norfloxacin (NFX) is a widely used antibiotic that poses a persistent threat to aquatic ecosystems. The combination of photocatalysis and microalgae has emerged as a promising strategy for antibiotic removal. However, current research predominantly focuses on optimizing photocatalytic conditions and overall system efficiency, often neglecting the dynamic physiological state of microalgae when exposed to the photocatalytic degradation products of NFX (PDPN), which is the mixture of intermediates after 2 h ZGF photocatalysis of 8 mg/L NFX. This study constructed a synergistic degradation system employing a ZnO/g-C 3 N 4 /Fe 3 O 4 (ZGF) composite photocatalyst and Chlorella vulgaris for PDPN removal. Within this synergistic system, our primary focus was on the microalgal activity when cultured in a medium prepared from the PDPN. The results indicated the degradation rate of PDPN reached 82.1% in the synergistic degradation system. Transcriptomic analysis revealed that microalgae exhibited enhanced adaptability to these products, which were generated from ZGF photocatalytic pre-treatment of NFX. Key functional categories, including catalytic activity, oxidoreductase activity, and cytochrome P450 drug metabolism were significantly upregulated. This study indicates that the ZGF/microalgae system simultaneously achieves efficient pollutant degradation and maintains high metabolic potential as revealed by transcriptomic profiling, providing crucial insights for developing stable and sustainable bioremediation technologies.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Zhao Li,Liang Tang,Xiangying Chen,Zhongjie Zhang
A synergistic interfacial reinforcement strategy combining KH560 grafting and pectin-Ca 2+ crosslinking is developed. • Multi-scale interfaces (covalent/ionic/hydrogen bonds and entanglement) enhance filler-matrix compatibility. • The modified BF-K-P-Ca filler achieves a water contact angle of 120°, indicating effective hydrophobization. • The composite film exhibits tensile strength of 24.35 MPa and elongation at break of 593%. • The modification strategy enables industrial-scale film blowing for green biodegradable composites. In this study, PBAT, bamboo flour (BF), KH560, pectin, and calcium ions were used as starting materials to prepare PBAT/modified BF composites through chemical modification, melt blending, and blow molding processes. The effects of key process parameters such as pectin dosage and calcium ion dosage on the structure and properties of the products were systematically investigated. When the pectin dosage was 3%, calcium ion dosage was 2%, and BF dosage was 10%, the composite material achieved a transverse tensile strength of 24.35 MPa, a transverse elongation at break of 593%, a longitudinal tensile strength of 23.46 MPa, and a longitudinal elongation at break of 530%. The comprehensive properties were superior to those of composites prepared by traditional processes. The research results indicate that bamboo flour sequentially modified with KH560, pectin and calcium ions can effectively enhance the compatibility between the filler and the PBAT matrix, thereby significantly improving the overall performance of PBAT/BF composites. The PBAT/modified BF composites prepared in this study, due to their excellent mechanical properties, demonstrate broad application prospects in fields such as packaging, daily necessities, membrane materials, and disposable products. Download: Download high-res image (73KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
PHYSICA B-CONDENSED MATTER
·
2026
·
IF 3.2
Defu Xu
A blue-light-excitable Y 2 W 3 O 12 :Eu FIR thermometer is developed using 466 nm excitation matched to commercial InGaN LEDs. • The negative thermal expansion effect endows the phosphor with excellent resistance to thermal quenching, retaining ∼40% of its emission at 603 K. • The thermometer achieves a maximum relative sensitivity of 0.15% K −1 , repeatability >99.3%, and low temperature uncertainty below 4.2 K from 363 to 603 K. The development of reliable and cost-effective fluorescence intensity ratio (FIR) thermometers for high-temperature environments is urgently required, yet most existing probes rely on near-infrared stimulated upconversion or ultraviolet excited downshifting, which suffer from high system complexity, optical damage, and high cost. In response to this dilemma, herein I report a blue-light-excitable FIR thermometer based on Eu 3+ -doped Y 2 W 3 O 12 (YWO) negative thermal expansion (NTE) phosphor. Under 466 nm blue excitation, the YWO:Eu phosphor exhibits efficient downshifting luminescence dominated by the 5 D 0 → 7 F 2 electric dipole transition at 612 nm, and the NTE effect endows the phosphor with excellent resistance to thermal quenching. The proposed thermometer achieves a maximum relative sensitivity of 0.15% K −1 , together with excellent repeatability (>99.3%) and low temperature uncertainty (<4.2 K) over the 363-603 K range. Also, the single-wavelength excitation strategy allows the use of a commercial blue light emitting diode (LED), eliminating the need for costly tunable lasers or dual-wavelength setups and thereby reducing system complexity and cost. These results demonstrate that the blue-light-excited YWO:Eu FIR thermometer is a promising candidate for non-contact photothermal feedback in high-temperature environments.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Chong Chong Liu,Yong Jin Xia,Shu Pei Zeng,Ya Ru Pei,Jian Li,Qin Wang,Wen Tao Jing,Chun Cheng Yang
In 2 S 3 /MoS 2 @NC was constructed via a chemical foaming and sulfuration strategy. • The In 2 S 3 /MoS 2 heterostructure effectively accelerates the charge transfer. • The glyme-based electrolyte used boosts a thin and stable SEI layer. • In 2 S 3 /MoS 2 @NC shows excellent Na storage properties at room/low temperatures. To position transition metal sulfides to function effectively as anodes in sodium-ion batteries (SIBs), it is essential to address their poor sodium storage performance, which stems from low conductivity and substantial volume fluctuations. Inspired by the heterojunction engineering, herein, a composite of In 2 S 3 /MoS 2 heterostructure in three-dimensional N-doped carbon frameworks (In 2 S 3 /MoS 2 @NC) was constructed via an efficient chemical foaming and subsequent sulfuration strategy. The In 2 S 3 /MoS 2 heterostructure could effectively accelerate the charge transfer, augment the pseudocapacitive contribution and enhance Na + adsorption ability. The system employs a glyme-based electrolyte, which helps generate a thin, stable solid-electrolyte interface. Synchronously, the N-doped carbon frameworks serve to buffer the volume variation of In 2 S 3 /MoS 2 by functioning as a shielding layer. As anticipated, the In 2 S 3 /MoS 2 @NC electrode displays superior high-rate performance (243.2 mAh g −1 at 10 A g −1 ) and long-term cycling stability (352.3 mAh g −1 at 1 A g −1 after 1000 cycles, 223.1 mAh g −1 at 5 A g −1 and 170.5 mAh g −1 at 10 A g −1 after 2000 cycles). Particularly, it also shows potential in cryogenic applications (266.5 mAh g −1 after 70 cycles at 0.5 A g −1 , as well as 185.9 mAh g −1 at 2 A g −1 ). By proposing a straightforward strategy to rationally design anodes for SIBs, this work further advances the understanding of heterojunction engineering and ether-based electrolytes for transition metal sulfides. A hybrid of In 2 S 3 /MoS 2 @NC was constructed via a chemical foaming and subsequent sulfuration strategy. In the hybrid, the In 2 S 3 /MoS 2 heterostructure effectively accelerates the charge transfer and enhance Na + adsorption ability. The glyme-based electrolyte boosts a thin, stable solid-electrolyte interface. In 2 S 3 /MoS 2 @NC as an anode material in SIBs, delivers excellent sodium storage performance at room and low temperatures. Download: Download high-res image (242KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Xinyu Xiao,Yaoxian Hu,Binbin Zhou,Hui Su,Wensen Liu,Zhaowu Zhu,Tao Qi,Zeng Wei
A 6-Bipi/[NTf 2 ] − synergistic system for Li extraction from brine was developed. • Superior Li + selectivity over Na + , Mg 2+ , and Ca 2+ was achieved. • SC-XRD confirmed the tetrahedral coordination structure of [Li(6-Bipi) 2 ][NTf 2 ]. • DFT and IRI analyses revealed methyl steric hindrance as a driver of selectivity. Efficient Li + extraction from brine rich in Na + , Mg 2+ , and Ca 2+ is crucial for meeting the ever-growing demand for Li. This paper proposes a novel Li + extraction system based on the N-heterocyclic chelating ligand 6,6′-dimethyl-2,2′-bipyridine (6-Bipi) and the ionic liquid bis (trifluoromethanesulfonyl)imide ([NTf 2 ] − ), enabling highly selective Li + extraction from complex brine. A systematic investigation of how methyl substitution positions on the bipyridine rings regulate on the extraction performance revealed that the precise steric hindrance introduced by ortho-methyl substitution substantially enhances the separation of Li + from Mg 2+ , Na + , and Ca 2+ . Single-crystal X-ray diffraction confirmed the formation of a four-coordinate distorted tetrahedral complex, [Li(6-Bipi) 2 ][NTf 2 ], which serves as the extractant. Density functional theory calculations helped elucidate the microscopic mechanism underlying the extraction selectivity through thermodynamic, electronic structure, and energy analyses, confirming that the steric hindrance of the ortho-methyl group is the primary driver of the high selectivity. Under optimal conditions, the single-stage Li + extraction efficiency of this system reached 92.2%, while the extraction efficiencies of Na + , Mg 2+ , and Ca 2+ remained below 5%. Even in brine with a Li + concentration as low as 0.02 mol/L, the system maintained excellent Li + extraction performance (73%). This study presents a novel Li + extraction system characterized by high selectivity and strong adaptability to complex brine and provides a valuable theoretical basis and experimental support for the molecular design of N-heterocyclic Li extractants. Download: Download high-res image (201KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Yan Li,Ruiying Wu,Zhenglin Xia,Zhinan Jiang,Haitao Wu,Chen Lin,Jiaqing Chen,Fei Li
Tetrabromobisphenol A (TBBPA) and decabromodiphenyl ether (BDE-209) are typical brominated flame retardants (BFRs) with environmental persistence, bioaccumulation potential, and high toxicity, posing serious threats to ecosystems and human health. In this study, a novel fungal strain, Penicillium crocicola LF-2022 ( P. crocicola LF-2022), was identified, exhibiting excellent biodegradation capabilities toward both BFRs. Within six days, the strain achieved maximum degradation rates of 81.1% for TBBPA and 97.7% for BDE-209. The strain degraded both pollutants via intracellular and extracellular pathways, with cytochrome P450 enzymes playing a key role. Degradation pathway analysis revealed that TBBPA was degraded through reductive debromination and isopropylidene bridge cleavage, whereas BDE-209 underwent sequential debromination, ether bond cleavage, and ring-opening reactions, ultimately leading toward mineralization. In soil remediation experiments, P. crocicola LF-2022 effectively degraded TBBPA and BDE-209 even under non-sterile conditions, achieving approximately 55.3% and 82.9% degradation, respectively, demonstrating strong contaminant detoxification capability. Seed toxicity evaluation confirmed the detoxification efficacy of the fungal treatment. After remediation, wheat seedling root and shoot lengths increased markedly compared with untreated controls. Moreover, malondialdehyde content in plant tissues decreased significantly, while superoxide dismutase, peroxidase, and catalase activities recovered to near-control levels, indicating substantial BFR detoxification. Transcriptomic analysis revealed distinct degradation strategies: TBBPA stress upregulated genes related to membrane integrity, ABC transporters, CYP450 monooxygenases, and antioxidant enzymes, whereas BDE-209 stress induced upregulation of secreted hydrolases, lipoxygenases, and cAMP/Ras signaling components. Collectively, this study provides a robust, stress-tolerant fungal strain for efficient BFR degradation and establishes a foundation for the bioremediation of BFR-contaminated sites under non-sterile conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子