CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Hongze Yao,Lijun Luo,Kunpeng Zhang,Mingliang Du,Shuanglong Lu
Melt polymerization and post-hydrolysis yield an ionic organic polymer. • AM-POP achieves ultrahigh adsorption for MB (1061.7 mg g −1 ) and CV (1142.3 mg g −1 ). • Carboxylate-rich sites and water-induced swelling enable ultrafast kinetics. • AM-POP shows superior recyclability and stability across wide pH ranges. The development of high-performance adsorbents for efficient removal of organic pollutants from water remains highly desirable yet challenging. Herein, a crystalline covalent organic framework (PM-COF) is first constructed via a melt polymerization strategy and subsequently transformed into an anionic porous organic polymer (AM-POP) through KOH-mediated post-synthetic hydrolysis. The resulting PM-COF exhibits a highly ordered microporous structure with a high Brunauer-Emmett-Teller (BET) surface area of 1536.9 m 2 g −1 , whereas hydrolysis induces imide ring opening to generate a carboxylate-rich ionic polymer (AM-POP) with dramatically reduced apparent surface area (11.2 m 2 g −1 ) and crystallinity. Despite this loss of gas-accessible porosity, AM-POP delivers ultrafast and ultrahigh selective adsorption toward cationic dyes, including methylene blue (MB, 1061.7 mg g −1 ) and crystal violet (CV, 1142.3 mg g −1 ). Kinetic and isotherm analyses reveal pseudo-second-order behavior and Langmuir-type monolayer adsorption, indicating chemisorption on homogeneous ionic sites. The superior performance originates from the synergy between strong electrostatic attraction of densely distributed carboxyl groups and solvent-induced swelling in water, which reopens the collapsed polymer and enables efficient mass transfer. Moreover, AM-POP shows excellent tolerance to ionic strength, wide pH range, and good recyclability. This work highlights a hydrolysis-enabled structural transformation strategy to convert crystalline COFs into hydrophilic ionic adsorbents for efficient water purification. A framework transformation strategy is proposed that converts a rigid, highly crystalline COF into a flexible polymeric network via hydrolysis. This transformation generates abundant anionic active sites and induces pronounced swelling behavior, thereby enhancing the accessibility of internal sites and enabling highly efficient adsorption of cationic dyes. Download: Download high-res image (333KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2026
·
IF 6.9
Baosong Li,Meng Xiao,Yingjie Liu,Zhenghong Xu,Yanjie Wang,Weiwei Zhang,Bo Chen,Guang Guo
Ni–W/CrN particle-reinforced coatings were effectively fabricated through composite electrodeposition using bath solution comprising dispersed CrN particles, yielding a novel candidate coating with promising performance for deep-sea environments. The influences of deposition mode and substrate type on the fabrication process, microstructure and anti-corrosion property of Ni–W/CrN coatings were systematically investigated. The electrochemical corrosion behaviors were evaluated in 3.5 wt% NaCl solutions at ambient temperature. Results revealed that intermittent electrodeposition significantly enhances coating compactness, refines grain size, and improves corrosion resistance. The resulting coatings present uniform and dense microstructures without cracks, displaying typical nodular or cauliflower-like morphologies, and possess an FCC solid-solution structure of nickel. Specifically, composites deposited on carbon steel substrates under intermittent conditions at 3–5 A·dm −2 displayed fine-grained microstructures, low defect density, and superior corrosion resistance. EDS analysis confirmed uniform distribution of CrN particles throughout Ni W metallic lattice. Compared to the intermittent coating, the continuously deposited coating exhibits a higher defect occurrence rate, including nanoparticle agglomeration and porosity. The intermittent coating contains 11.46–12.62 at.% W and 2.51–3.08 at.% CrN, 78.28–79.9 at.% Ni and a small amount of oxygen. The embedded CrN nanoparticles promote heterogeneous nucleation and induce microstructural refinement in the Ni W matrix. The average roughness ( R ₐ) of intermittent electrodeposition at 2 A·dm −2 was 36.6 nm, which was much lower than 616 nm for continuous electrodeposition at 3 A·dm −2 . R a of intermittently deposited coating on carbon steel, prepared at 3 and 5 A·dm −2 increased to 636 nm, indicating a strong dependence of surface topography on current density, substrate type, and deposition mode. Electrochemical evaluations identified the optimal processing parameters for achieving outstanding corrosion resistance: 15 g L −1 CrN, 3–5 A dm −2 , and intermittent electrodeposition mode. The embedded CrN nanoparticles could effectively fill microstructural defects (e.g., pores and microcracks) within the Ni W matrix, thereby enhancing physical barrier properties and overall corrosion resistance. These electrodeposited Ni–W/CrN nanocomposites exhibit exceptional fine and compact microstructure and superior performance, making them high promising candidates for protective coatings in aggressive service environments.
✓ 已验证
DOI
高影响因子
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
·
2026
·
IF 5
Jianmin Chen,Wanhui Wu,Baozhu Feng,Meilian Ning,Ziyan Cai,Qiulong Zhang,Liyang Du,Yunhua Gao
SPFX-SLNs were systematically optimized using BBD-RSM for infected wounds. • Optimized SLNs showed uniform spherical morphology with a size of ∼87 nm. • SPFX-SLNs exhibited 2-fold higher antibacterial potency than the free drug. • MNs enabled efficient skin penetration for targeted SLNs delivery. • Optimized MNs achieved a 98.61% wound closure rate by Day 14. The efficient management of infected skin wounds is severely limited by the thick bacterial biofilm within the lesion, the intractable stratum corneum barrier of the perilesional skin, and the high toxicities of potent antibiotics. Sparfloxacin (SPFX) was withdrawn from the market due to its severe systemic side effects and UV-induced phototoxicity, while its severe hydrophobicity causes localized crystalline cytotoxicity upon topical application. To safely rejuvenate this potent drug, an integrated transdermal system combining photoshielding, SPFX-loaded solid lipid nanoparticles (SPFX-SLNs) with dissolving microneedles (MNs) was developed. This study primarily focuses on the systematic screening, formulation development, and optimization of SPFX-SLNs via Box-Behnken Design-Response Surface Methodology (BBD-RSM). The optimized nanocarriers exhibited a uniform size (86.85 ± 1.89 nm) and a two-fold higher antibacterial potency against Escherichia coli ( E. coli ) than free SPFX. Mechanistically, the solid lipid core locked SPFX in a safe amorphous state to preclude crystal-induced irritation, while functioning as a physical photoshield against UV activation. By depositing the nanomedicine exclusively into infected dermis, the MN platform minimized systemic drug exposure. In a rat model of E. coli -infected biofilm wounds, the formulated SPFX-SLNs MNs achieved over 50% (58.44%) wound closure within 3 days and near-complete re-epithelialization by day 11, and a 98.61% final closure rate by day 14. Ultimately, this work establishes a comprehensive formulation development strategy for a safety-enhanced, biofilm-penetrable nanomedicine-MN hybrid that successfully repurposes a clinically restricted antibiotic for advanced wound regeneration. Download: Download high-res image (242KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2026
·
IF 6.7
Wangyu Nan,Qingdan Ye,Jie huang,Pei Liang,Qianmin Dong,Kun Pang,Zihong Ye,Kai Sun,Yufeng Wang
In this study, we developed an aptamer-mediated surface-enhanced Raman scattering (SERS)-coupled immunochromatographic assay (ICA) for the quantitative detection of pyrethroids. For this approach, core-shell gold nanoparticles (Au@Au NPs) were used as SERS probes by conjugating with aptamers, and fluorescent Raman reporter molecules (MPBN) were incorporated to yield stable, reproducible spectral signals. Leveraging the aptamers' specific recognition of the target analyte, Raman-labeled Au@Au NPs could be effectively captured by the test line of the immunochromatographic strip, thereby enabling the quantitative analysis of fenvalerate-with a limit of detection (LOD) as low as 0.4 ppb. Comparative experiments revealed that the detection sensitivity of this SERS-ICA method was 476 times higher than that of conventional lateral flow assays (LFA), showcasing a remarkable sensitivity advantage. To validate its practicality, spiked recovery experiments were conducted on three real samples, namely welsh onions, cowpeas, and kidney beans. The results showed that the spiked recoveries ranged from 78.3% to 112.5%, with relative standard deviations (RSD) between 1.7% and 20.1%. This fully confirms that the method possesses favorable specificity and accuracy, making it suitable for real-sample detection. This detection platform offers a new technical route for the rapid on-site monitoring of trace contaminants in food safety and environmental surveillance, holding broad application prospects.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POULTRY SCIENCE
·
2026
·Vol. 105
·期 11
·107437
·
IF 4.5
Zhanbang Ma,Fangfang Wang,Bing Wang,Zhihui Zuo,Zongxi Han,Huixin Li,Deying Ma
Vitamin D is increasingly recognized as an important regulator of innate and adaptive immunity, yet its antiviral role in chickens during fowl adenovirus serotype 4 (FAdV-4) infection remains unclear. In this study, we investigated the effects of oral vitamin D 3 supplementation on humoral immunity, tissue viral load, and immune-related gene expression in FAdV-4-infected chickens. Ninety 8-day-old specific pathogen-free chickens were randomly divided into two groups (n = 45/group) and fed a basal diet. The experimental group received oral vitamin D 3 dissolved in 0.1 mL soybean oil at a dose equivalent to 3000 IU/kg diet daily for 3 weeks, whereas the control group received soybean oil alone. After supplementation, all birds were challenged with FAdV-4. Vitamin D 3 supplementation significantly reduced tissue viral loads and increased serum antibody levels compared with the control group. At the transcriptional level, vitamin D 3 modulated key innate and adaptive immune markers, including Toll-like receptors (TLRs), avian β-defensins, and cytokines. It downregulated several TLRs and reduced the pro-inflammatory cytokines interleukin (IL)-6 and IL-8, while increasing the antiviral cytokines interferon-γ and IL-1β. Vitamin D 3 also increased vitamin D receptor expression, decreased inducible nitric oxide synthase, and reduced the apoptosis regulators B-cell lymphoma-2 (BCL-2) and Bcl2-associated X protein in selected tissues. In conclusion, vitamin D 3 supplementation enhanced antiviral defense against FAdV-4 infection, possibly by promoting humoral immunity and modulating innate immune and apoptosis-related responses. These findings provide new insight into the role of vitamin D 3 in limiting FAdV-4 infection and support its potential as a nutritional strategy for controlling viral diseases in poultry.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Peike Jiang,Miaomiao Li,Peng Liu,Shitao Li,Yeqing Xu,Shiyue Cao,Chen Xie,Yucheng Yin,Peiyong Feng,Xin Jing
We develop a novel cyclic alternating deposition strategy to fabricate a breathable and robust superhydrophobic membrane. • The membrane exhibits a water contact angle of 156.4 ± 1.7°, excellent self-cleaning and anti-icing properties. • The membrane demonstrates ultrahigh separation efficiency (98.4%) and outstanding absorption capacity (53.5 g/g). • The membrane maintains a contact angle above 153° after 50 friction cycles. Artificial superhydrophobic membranes show great promise for oily wastewater treatment and oil spill remediation, yet they often face a fundamental trade-off between liquid repellency and vapor permeability, with dense structures sacrificing breathability and ultimately leading to performance degradation under prolonged use. Therefore, integrating persistent superhydrophobicity with high breathability and mechanical durability remains challenging. Inspired by the hierarchical microarchitecture of Hygroryza aristata , this study develops a novel cyclic alternating deposition strategy that combines electrospinning and electrospraying to fabricate a breathable, flexible, and robust superhydrophobic membrane with a hierarchical fiber-sphere alternating structure (HFBA). It exhibits a water contact angle of 156.4 ± 1.7°, excellent self-cleaning and anti-icing properties, and satisfactory mechanical performance. It also demonstrates favorable breathability, with a steady-state water vapor transmission rate of 184.38 g·m −2 ·d −1 and a gas permeability of 2725.18 cc·m −2 ·d −1 , effectively reconciling the liquid-repellency/breathability trade-off. Moreover, it demonstrates ultrahigh separation efficiency (98.4%) and outstanding absorption capacity (53.5 g/g) for various oil–water mixtures. The membrane maintains a contact angle above 153° after 50 friction cycles and shows negligible efficiency loss (<1%) over 10 separation cycles, highlighting exceptional durability. This work provides a robust biomimetic material with significant potential for practical oil-polluted water treatment and marine environmental protection. Download: Download high-res image (219KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ATMOSPHERIC ENVIRONMENT
·
2026
·
IF 3.8
Linlin Ye,Yan Huang,Linfeng Zhang,Panya Xu,Jingjing Wang,Chengzhu Zhu,Tong Zhu,Mingjin Wang
Model simulations indicate that atmospheric acidification increases the solubility of phosphorus (P) in mineral dust, thereby altering primary productivity in many P-limited ecosystems. However, results from laboratory simulation studies are still lacking. We investigated the heterogeneous reaction between nitrogen dioxide (NO 2 ) and hydroxyapatite (HAP) using a flow reaction system. The results reveal the formation of nitrate products and an increase in the water solubility of P in HAP. Under conditions of 50 ppm NO 2 and 50% relative humidity, after 8 h of reaction, the reactive uptake coefficients calculated using geometric surface area and Brunauer–Emmett–Teller surface area were 1.61 × 10 −5 and 1.26 × 10 −9 , respectively. After 10 h of reaction, the water solubility of P was 3.61 times its pre-reaction value. Longer reaction times and higher NO 2 concentrations promote both greater NO 3 − formation and increased P dissolution. The mechanism for increased water solubility involves hydrogen ions (H + ) weakening calcium bonds, thereby enhancing the release of P from the HAP crystal surface. This study demonstrates that atmospheric heterogeneous reactions between HAP in mineral dust and acidic gases can enhance the water solubility of P, thus increasing its bioavailability. This enhancement partially alleviates P limitation in tropical rainforests and open-ocean ecosystems, boosting primary productivity in P-limited ecosystems. Primary production processes absorb and fix atmospheric CO 2 , which in turn influences the carbon cycle in P-limited ecosystems.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2026
·
IF 16.8
Xue Li,Wei Li,Yanqin Fu,Jianhua Zhang,Sen Yang,Zifeng Hu,Junhao Zhao,Yongbo Cao,Jian Zhang,Yulei Zhang
The laser ablation mechanism of PDC-SPS HfC x N 1 − x ceramics was clarified. • At 39.8 MW m –2 heat flux, HfC 0.75 N 0.25 shows superior ablation resistance. • Dislocations, lath-like structures and dense Hf(C,N,O) layers stabilize ablation. Hafnium carbonitride (HfC x N 1− x ) ceramics show great potential for thermal protection systems due to their ultra-high melting point, and investigating their ablation behavior is essential for their application under extreme conditions. In this work, HfC x N 1− x ceramics with varying nitrogen contents were synthesized via polymer-derived ceramic followed by spark plasma sintering. Laser ablation tests showed that HfC 0.75 N 0.25 achieved excellent ablation resistance under the laser power of 500 W, with linear and mass ablation rates of 1.08 µm s −1 and 0.32 mg s −1 , respectively. This is ascribed to the high melting point and exceptional thermal stability of HfC 0.75 N 0.25 , which result from moderate nitrogen incorporation. During laser ablation, dislocation accumulation and the formation of lath-like structures dissipate part of the laser heat flux. Subsequently, a dense Hf(C, N, O) solid solution layer with high viscosity forms, which effectively impedes oxygen diffusion and maintains stable ablation resistance of HfC 0.75 N 0.25 . Conversely, excessive nitrogen incorporation induces the formation of the Hf 7 O 8 N 4 phase with numerous defects and crack nucleation, ultimately deteriorating laser ablation resistance. These findings provide useful insights for the design and development of ultra-high temperature ceramics for applications in extreme environments. Download: Download high-res image (277KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Zemin Li,Hui Wang,Yawen Bo,Yanjun Wang,Sheng Liu,Jingxian Hua,Yawei Gu,Qihan Gong,Yichang Pan,Rujing Hou
The separation of hexane isomers from light naphtha is critical to advancing energy-efficient refining and supporting environmental sustainability. However, this application requires membranes capable of precise molecular discrimination. In this work, we focus on hard acid–hard base coordinated Al-/Zr-MOFs due to their exceptional stability and tunable pore environments. Through combined thermodynamic and kinetic evaluations, four Al-MOFs (KMF-1, CAU-23, MIL-160, Al-bttotb) and Zr-MOF(UiO-66) emerged as promising candidates. UiO-66 was ultimately identified as the optimal platform due to its excellent membrane compactness and techno-economic potential. We subsequently employed a mixed-linker strategy to achieve Ångstrom-level pore size engineering in UiO-66, the resulting UiO-66-NH 2 membrane exhibited superior discrimination between linear/mono-branched (n-hexane, 3-methylpentane) and di-branched (2,2-dimethylbutane) isomers, achieving an ideal selectivity of 4.8—a performance that exceeds most current state-of-the-art MOF membranes. Pervaporation experiments with a simulated C 5 –C 6 naphtha mixture further confirmed the ability of the membrane to efficiently enrich ethylene cracking precursors, while the retentate effectively concentrated high-octane gasoline additives. These results underscore the strong industrial potential of Ångstrom-precision engineered MOF membranes for simultaneous production of high-value chemical feedstocks and premium fuel components from light naphtha.
✓ 已验证
产品关联
DOI
高影响因子
FLUID PHASE EQUILIBRIA
·
2026
·
IF 2.7
Jian-an Wang,Jiahao Shi,Junyu Feng,Qingsong An,Shengshan Bi
High-pressure density data of n -alkanols are essential for the design of biodiesel blended fuels and fuel injection in marine engines. However, reliable experimental data for n -alkanols (C4–C7) under high pressures (up to 200 MPa) remain scarce. In this study, a high-pressure density measurement system based on the variable-volume method was established, achieving a combined expanded uncertainty of 0.27% ( k = 2). The densities of n -alkanols (C4–C7) were measured over the temperature range of 303.15–383.15 K and pressures up to 200 MPa. The measured data were accurately correlated using the Tammann-Tait equation, and the derived thermodynamic properties were obtained. Then, the parameters of the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) equation of state (EoS) for n -alkanols were optimized using the 2B association scheme. Within the experimental range, the average absolute relative deviation (AARD) between the calculated and experimental densities was <0.1%, demonstrating the applicability of the model for ultra-high-pressure volumetric calculations. This study addresses the gap in high-pressure property data for n -alkanols (C4–C7) and provides a critical experimental and modeling foundation for the development of efficient and clean marine power systems. Download: Download high-res image (351KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Jingyu Zhang,Yicheng Jiang,Yafei Xu,Qingfeng Zhai,Chenyang Luo,Qiang Zhang
The efficient removal of organic pollutants from wastewater with diverse compositions remains a significant challenge due to the inherent limitations of traditional advanced oxidation processes (AOPs). Radical-dominated pathways are often inhibited by water matrix components, whereas nonradical pathways, although more selective and tolerant, exhibit slower reaction rates. Herein, we developed a photo-responsive Fe–B@C catalyst that enables dynamic regulation of reactive oxygen species (ROS) pathways through light irradiation, effectively acting as a switch between nonradical and radical-nonradical synergistic mechanisms. Under dark conditions, the system predominantly generates singlet oxygen ( 1 O 2 ), maintaining high stability against inorganic salts, humic acids, and broad pH variations. Upon illumination, the catalyst switches to a synergistic pathway involving 1 O 2 , hydroxyl radicals (•OH), and sulfate radicals (SO 4 − •), achieving near-complete tetracycline removal and enhanced mineralization. Mechanistic studies reveal that boron facilitates the Fe 3+ /Fe 2+ redox cycle and promotes ROS generation, while light precisely controls the activation mode. This work demonstrates a smart catalyst design strategy, allowing AOPs to adapt to varying wastewater compositions, offering a promising solution for tailored and high-efficiency water treatment.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2026
·
IF 10.7
Yang Yang,Xinyu Yang,Huiyan Gu,Lei Yang
Abies holophylla oil extracted cleanly via microwave hydrodiffusion-gravity (MHG). • MHG maximized essential oil yield under optimized conditions (385 W, 35 min). • MHG reduced energy consumption and CO 2 emissions by 83.7% versus hydrodistillation. • Solvent-free MHG achieved the highest AGREEprep greenness score. • MHG supported biomass valorization through monoterpene enrichment. Forest conifer biomass is a promising renewable source of high-value volatile products, but its industrial utilization requires extraction routes that reduce process burden while preserving product quality. In this study, microwave hydrodiffusion-gravity (MHG) was developed as a cleaner production-oriented strategy for extracting essential oil (EO) from fresh Abies holophylla needles. The MHG process was optimized by face-centered central composite design and kinetic modeling, then benchmarked against microwave-assisted hydrodistillation (MHD), solvent-free microwave extraction (SFME), and conventional hydrodistillation (HD) in terms of extraction yield, energy and carbon performance, process greenness, volatile composition, and value-added bioactivity. Under the optimized conditions (385 W, 35 min), MHG produced the highest EO yield (16.55 ± 0.83 mL/kg DW). Compared with HD, MHD, and SFME, MHG technology reduces energy consumption and CO 2 emissions. Consistent with this, the AGREEprep analysis showed that MHG achieved the highest green score (0.62), reflecting its advantages in solvent-free operation, lower process load, reduced wastewater generation, and higher energy efficiency. GC-MS analysis further indicated that MHG favored enrichment of monoterpene hydrocarbons, particularly α-pinene and camphene. In parallel, the EO from MHG exhibited the strongest in vitro acetylcholinesterase (AChE) inhibitory activity among the reference extraction methods. Overall, the results demonstrate that MHG can simultaneously improve resource-use efficiency, reduce preparation burden, and enhance product functionality, providing a practical, cleaner extraction option for the high-value utilization of A. holophylla needles. Download: Download high-res image (282KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子