文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第1693至1704个,产品总数347,389个

切换升序
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Entropy-modulated Fenton-like oxidation driven by in-situ confinement effect for efficient removal of emerging contaminants

Min Tang,Wu Liu,Jinquan Wan,Shiyu Zuo,Zhiyong Wang,Rui Peng

Fenton-like oxidation is often hampered by high energy barriers, uncontrolled oxidation pathways, and inefficient reactive oxygen species (ROS) utilization. Here, we report an energy-driven confined catalytic nanoreactor that leverages the in-situ confinement energy generated within nanopores to fundamentally regulate degradation thermodynamics. Taking sulfamethoxazole (SMX) as a model contaminant, the confined nanoreactor exhibited a 22.11-fold higher kinetic constant (0.157 min −1 ) and 40 % enhanced mineralization efficiency compared with its non-confined system. The imprinting channel of confined nanoreactor enabled selective adsorption of SMX within the nanochannel, inducing pronounced confinement effects. The resulting confinement energy triggered a low-entropy degradation pathway (ΔS reduced by 3.2 × 10 3 -fold), which broke thermal equilibrium constraints and redirected SMX oxidation along a low-energy-barrier route. The in-situ confinement-induced low-entropy reaction not only accelerated pollutant degradation but also improved ROS conversion efficiency. This study demonstrated a green and sustainable approach to overcome the intrinsic efficiency bottleneck of Fenton-like processes and provide a new perspective on exploiting nanoconfinement effects for environmental remediation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING SCIENCE · 2025 · IF 4.3

Tetrachromic InP/ZnS quantum dots-based fluorescent sensor arrays for accurate discrimination of multiplex metal ions

Jianan Huang,Xianlin He,Ruqi Zhang,Zixuan Ding,Yanting Song,Haimei Yang

Accurate identification of multiple teas based on the difference in their contents and species of metal ions is vital in food inspection and public health. However, achieving accurate sensing from one material with various transduction signals and excellent anti-interference remains a challenge. Herein, a four-channel sensing platform was constructed by combining with four water-soluble InP/ZnS QDs with independent emission. The fluorescence intensities of the four water-soluble InP/ZnS QDs change in different degrees owing to the synergistic coordinative effect between metal ions and ligands. Interestingly, the multi-channel sensing platform allows the qualitative performance of metal ions with excellent anti-interference, high sensitivity, and high accuracy in binary and ternary mixtures. Moreover, the multi-channel fluorescent array exhibited a universality-powerful capability for identifying five teas with satisfactory results. The universal application for detecting Cr 6+ , Hg 2+ , and Cu 2+ in various tea drinks was demonstrated with excellent recovery, indicating a promising potential application in food safety.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of the Taiwan Institute of Chemical Engineers · 2025 · IF 6.3

Enhanced anti-corrosion performance of epoxy coating with the incorporation of novel carbon nitride/PANI fillers

Ji-Long Sun,Da-Shuai Li,Ting-Ting Li,Ching-Wen Lou,Xu Han,Hai-Tao Ren

Background Corrosion, being a pervasive and inevitable natural occurrence, poses a grave threat to engineering equipment, human well-being, and the environment. Polyaniline (PANI) is an excellent anti-corrosion filler that enhances the corrosion resistance of steel surface. The traditional PANI preparation methods are chemical oxidation or electrochemical oxidation at low temperature, and the reaction conditions are harsh and easy to cause energy waste. Methods Novel ECN@PANI composite fillers were synthesized using nitric acid etched g-C 3 N 4 (ECN) as photoinitiator at room temperature. ECN@PANI/WEP coatings were prepared by using synthetic ECN@PANI composites as corrosion inhibitors and waterborne epoxy resin (WEP) as raw materials. ECN@PANI/WEP coatings were then hydrophobically modified with polydimethylsiloxane (PDMS) to yield ECN@PANI/HWEP coatings. The comprehensive structures and optical properties were thoroughly evaluated through Field Emission Scanning Electron Microscopy (FESEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Electrochemical Impedance Spectroscopy (EIS) and Diffuse Reflectance Spectroscopy (DRS) studies. Significant findings ECN@PANI composite fillers with excellent anticorrosive properties were prepared by photocatalytic polymerization using ECN as a photoinitiator. XPS and XRD results show that ECN@PANI/HWEP coating forms a dense passivation layer (Fe 3 O 4 ) on Q235 steel surface, which reduces the corrosion of steel to the maximum extent; ECN@PANI/HWEP produces active substances under light, which oxidize, fracture, and degrade the cell wall when in contact with the cells, resulting in a coating with better anti-algae properties; and the ECN@PANI/HWEP coating refracts part of UV rays and converts the remaining UV rays into heat to achieve excellent UV resistance properties. Combining outstanding UV resistance and anti-algae properties, the ECN@PANI/HWEP coating ensures long-term corrosion protection.

CAS / MDL: 110-54-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SOLAR ENERGY MATERIALS AND SOLAR CELLS · 2025 · IF 6.3

Sb doping facilitates particle refinement and improves transparent NIR insulation of CsxWO3 for energy-saving coating

Qianyi Li,Yuxuan Zheng,Jingyao Zhang,Zhiyong Xiong,Haibo Jin,Yuefeng Su,Caihong Feng,Ning Li,Chengzhi Wang,Jingbo Li

Cesium tungsten bronze (Cs x WO 3 ) is of significant interest due to its unique spectral selectivity, which is utilized in transparent thermal insulation coatings. However, the low-cost batch preparation of Cs x WO 3 nanopowders remains a challenge. In this study, we performed an Sb doping modification of Cs x WO 3 . It was observed that Sb doping makes Cs x WO 3 more prone to breakage, facilitating the preparation of nanoparticle Cs x WO 3 through a simple solid-state reaction followed by mechanical milling. A 7 % Sb doping results in a small average particle size of 108 nm using moderate ball milling. Meanwhile, appropriate Sb doping enhances the transparent thermal insulation properties of Cs x WO 3 . A 3 % Sb doping raises the integrated visible light transmittance ( T lum , 380–780 nm) of Cs x WO 3 from 61.7 % to 65.40 %, and improves the near-infrared shielding efficiency ( Ψ NIR , 780–2500 nm) from 61.20 % to 65.92 %, increasing by approximately 4 % and 5 %, respectively. The reasons for these property improvements are discussed based on experiments concerning bandgap ( E g ) and oxygen vacancy concentrations induced by Sb doping. This study indicates that Sb doping of 1–3 at% can produce Cs x WO 3 nanopowders with better performance in a low-cost method, which is of great significance for advancing the production and practical application of nano-sized tungsten bronze powder in energy-saving coatings.

CAS / MDL: 1314-60-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMBUSTION AND FLAME · 2025 · IF 6.2

A kinetic and experimental analysis of the co-oxidation of ammonia and dimethoxymethane employing SVUV-PIMS

Chunlan Qin,Bingzhi Liu,Weijie Xu,Canbin Lin,Shihao Ning,Zhandong Wang,Qingbo Zhu,Lidong Zhang

The carbon-neutral potential of ammonia is constrained by fundamental combustion barriers, driving the development of advanced bio-fuel blends as kinetic enhancement strategies. In this research, co-oxidation experiments of NH 3 and dimethoxymethane (DMM, CH 3 OCH 2 OCH 3 ) were executed in a jet-stirred reactor (JSR) under 1 atm and 730–1060 K. Through the use of state-of-the-art synchrotron radiation vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) for online diagnostics, we achieved the first quantification of the species pool in the reaction system, covering C/H/O compounds and various key nitrogen-containing intermediates. The experimentally derived species profiles served as the foundation for refining a kinetic model to describe NH 3 and DMM co-oxidation. The model was updated based on experimental and literature data, with key modifications to the rate constants for H-atom abstraction (DMM, NH 3 , intermediates) and the primary N 2 O consumption pathway. Ultimately, the improved model substantially improves the prediction of NH 3 /DMM co-oxidation species distribution (especially for DMM, NH 3 , CH 3 OCHO, CH 2 O, N 2 O, etc.), and it can also accurately reproduce ignition delay times and laminar flame speeds from previous studies. Additionally, the kinetic analysis further clarified the co-oxidation reaction pathways of NH 3 /DMM, especially highlighting the non-negligible influence of some key reaction pathways on their co-oxidation behaviour, such as CH 3 OCH 2 OCH 3 + NH 2 = CH 3 OCH 2 OCH 2 (CH 3 OCHOCH 3 ) + NH 3 , CO + N 2 O = N 2 + CO 2 , etc. This research provides critical experimental data and a more reliable kinetic model, advancing our understanding of the chemical kinetics underlying NH 3 /DMM co-combustion.

CAS / MDL: 67-68-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MINERALS ENGINEERING · 2025 · IF 5

Heteroatom-modified spinel ferrite MnFe2O4 for enhanced degradation of tetracycline via PMS/H2O2 activation

Xiaoyu Jiang,Sikai Zhao,Jie Wang,Haiyi Lv,Weizhen Bai,Wenbao Liu,Qiang Zhao,Yanbai Shen

Tetracycline (TC) persistence in aquatic systems poses significant ecological and human health risks, due to its toxicity and resistance to conventional biodegradation. In this study, sulfur and nitrogen modification strategies were employed to enhance the catalytic performance of spinel ferrite MnFe 2 O 4 for TC degradation via H 2 O 2 and peroxymonosulfate (PMS) activation. The catalysts were characterized using SEM, XRD, VSM, CV, and ICP-OES to elucidate the effects of heteroatom modification on morphology, crystal structure, magnetic separability, and metal leaching behavior. S modification markedly enhanced both H 2 O 2 and PMS activation capabilities. The optimized S/MnFe 2 O 4 -5/H 2 O 2 system removed 82 % TC (50 mg/L) within 20 min, an eightfold increase in the reaction rate compared to the unmodified MnFe 2 O 4 /H 2 O 2 . This system maintained high efficiency across a broad pH range (3–11). In contrast, nitrogen modification selectively improved PMS activation, with the optimal N/MnFe 2 O 4 -3/PMS system degrading 74 % TC in 30 min, twice the degradation rate of MnFe 2 O 4 /PMS, and exhibiting minimal metal leaching with excellent recyclability. Scavenger studies confirmed that ·OH constitutes the dominant reactive oxygen species (ROS) in S/MnFe 2 O 4 -5/H 2 O 2 systems, while both ·OH and ·SO 4 - contribute significantly in N/MnFe 2 O 4 -3/PMS systems. Sulfur species act as electron mediators, facilitating the Fe/Mn redox cycle and enhancing ROS generation, whereas zero valence iron (Fe 0 ) formed during nitrogen modification serves as an efficient electron donor to activate PMS. Degradation pathway analysis and toxicity predictions confirmed a substantial reduction of TC environmental hazards. This work provides fundamental insights into the structure–activity relationships of heteroatom-modified MnFe 2 O 4 catalysts, and establishes practical design principles for robust advanced oxidation process catalysts in antibiotic remediation.

CAS / MDL: 106-51-4 299-11-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RESOURCES CONSERVATION AND RECYCLING · 2025 · IF 10.9

Pollutant control and material conversion of the waste graphite recovered from spent lithium-ion batteries: Preparation of building composite materials

Yusen Wu,Pengcheng Wang,Keyi Lin,Jiaqi Hu,Yonggao Fu,Jie Zhu,Jujun Ruan

The development of sustainable methods for the recycling and disposal of spent lithium-ion batteries (LIBs) has become a research priority. A large amount of waste graphite containing metals, such as Ni, Co, and Cu, was produced in the recycling process of LIBs. It was classified as hazardous waste due to its high metal leaching concentration and requires safe disposal. In this study, the concentration leaching of Ni, Co, and Cu was inhibited to less than 2 mg/L in the toxicity characteristic leaching procedure through the preparation of concrete composite materials. It showed that 1% graphite incorporation can increase compressive strength by 7.75% and stiffness by 4.53% after 7 days of curing. Scenario and cost-effect analysis showed that under the optimistic scenario, the net income of 2400 yuan per ton can be achieved through the disposal subsidy and product income. This study provides a solution with both environmental and economic benefits for the safe disposal of waste graphite and promotes the collaborative development of LIBs recycling and green building materials.

CAS / MDL: 64-19-7 7647-01-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2025 · IF 7.5

Experimental and DFT investigations of multiple active sites in Zr/Co-MOFs catalysts for tandem catalysis of styrene to styrene carbonate

Yuanyuan Cui,Gang Fu,Jiaxing Wen,Li Yang,Jiaxu Zhang,Jianmin Sun

The direct synthesis of cyclic carbonates from olefins involves a tandem process of olefin epoxidation and CO 2 cycloaddition, but designing a single catalyst with multiple active sites remains a challenge. In this work, a series of dual ligands quaternized Zr-based MOFs (Zr-Bpydc(Py + Br − )/CoTCPP-x, x = 1–5) were successfully synthesized by co-assembling 2,2′-bipyridine-5,5′-dicarboxylic acid (Bpydc) and cobalt(II) 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (CoTCPP) with Zr 6 clusters, followed by post-synthetic quaternization to incorporate nucleophilic Br − sites. Among them, Zr-Bpydc(Py + Br − )/CoTCPP-4 exhibited the best catalytic performance under mild reaction conditions (80 °C, 1.0 MPa, 12 h), achieving styrene conversion of 94.2 % and styrene carbonate (SC) selectivity of 66.5 %, significantly outperforming most previously reported heterogeneous catalytic systems under cocatalyst-free conditions. The excellent catalytic activity was attributed to the synergistic effect among redox-active Co 2+ sites, Lewis acidic Zr 4+ and Co 2+ sites, Br − sites, and basic pyridyl sites. Importantly, the catalyst also demonstrated broad substrate applicability and good recyclability, with negligible activity loss over five consecutive cycles. Furthermore, density functional theory (DFT) calculations elucidated the energy profile and reaction pathway of the styrene oxidative carboxylation reaction, revealing the cooperative roles of multiple active sites in both epoxidation and CO 2 cycloaddition reactions. Therefore, this work proposes a strategy based on the synergy of multiple active sites for developing efficient and recyclable heterogeneous MOF catalysts for CO 2 conversion.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2025 · IF 7.5

Tuning the O p band center in Co3O4 catalysts by Fe doping for Switching lattice Oxygen-Mediated mechanism in Acidic oxygen evolution reaction

Yangshuo Liu,Yaotian Yan,Feiyu Xu,Liang Qiao,Jiehe Sui,Wei Cai,Xiaohang Zheng

The activation of the lattice oxygen oxidation mechanism is vital for enhancing oxygen evolution reaction (OER) performance as it enables direct O–O bond formation, avoiding the *OOH formation. Compared with the conventional adsorbate evolution mechanism (AEM), the lattice oxygen-mediated mechanism (LOM) can break the theoretical limit of conventional adsorbate-based scaling relations and enhance the oxygen evolution reaction kinetics. Thus, there is an urgent need for an efficient strategy for designing OER electrocatalysts based on LOM. The O p band center is employed as descriptor in conjunction with machine learning to facilitate the activation of lattice oxygen. The descriptor can accelerate the catalyst design process as it circumvents the need for complex intermediate calculations. According to predictions, the Fe-Co 3 O 4 catalyst exhibits OER performance comparable to that of noble metal catalysts. The Fe-Co 3 O 4 catalyst achieves a low overpotential of 258 mV at 20 mA cm -2 in 0.5 M H 2 SO 4 , attributed to the shift in catalytic mechanism from AEM to LOM.The incorporation of Fe effectively induces an upshift in the O p band center and weakens the Co–O bond, thereby promoting direct O–O coupling for O 2 generation and consequently reducing the OER overpotential. Our study introduces a method to activate the lattice oxygen of metal oxide electrocatalysts, holding substantial promise for enhancing large-scale hydrogen production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MINERALS ENGINEERING · 2025 · IF 5

Efficient magnesium removal by reverse flotation of apatite using cyclic modified fatty acid soaps: Experiment and DFT calculation

Kunzhong He,Dongming Zhang,Menglai Wang,Runzhe Liu

A self–made cyclic modified fatty acid soaps (CMFAS) was used as a collector for the reverse flotation of phosphate rock for the first time. Pure mineral tests indicate that at a CMFAS dosage of 800 g/t, the phosphorus concentrate achieved a P 2 O 5 grade of 25.43 %, a recovery of 90.83 %, an MgO grade of 0.42 %, and a recovery of 13.52 %, demonstrating relatively good performance. When 1200 g/t NaOL was used, the phosphorus concentrate had a P 2 O 5 grade of 25.18 %, a recovery of 52.07 %, an MgO grade of 1.68 %, and a recovery of 30.56 %. Fourier transform infrared spectroscopy (FT–IR) analysis revealed the formation of a new complex when dolomite reacted with CMFAS, accompanied by a new absorption peak in the infrared spectrum. Conversely, no new absorption peaks were observed for CMFAS and apatite. Zeta potential test results showed that the collector addition shifted the isoelectric points of both dolomite and apatite in a negative direction, with the most pronounced shift observed in the dolomite–CMFAS system at 53.88 mV. Density functional theory (DFT) calculations showed that the sulfonic acid group of CMFAS preferentially adsorbs onto dolomite, with an adsorption energy of 85.37 kJ·mol −1 , significantly higher than the 31.32 kJ·mol −1 observed for apatite. Although NaOL also reacts with dolomite, its interaction with apatite is more pronounced. The adsorption energy between NaOL and dolomite (73.91 kJ·mol −1 ) exceeds that of apatite (35.67 kJ·mol −1 ). Therefore, CMFAS is a promising reverse flotation collector for apatite, ensuring phosphate recovery while effectively removing magnesium minerals.

CAS / MDL: 7664-38-2 7664-93-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PROGRESS IN ORGANIC COATINGS · 2025 · IF 7.3

Bio-constructed fireproof poly (vinyl alcohol)/β-cyclodextrin/phytic acid composite films for food preservation

Zhihao Zhang,Jinpeng Liu,Jinxu Teng,Junchao Huang,Yuhua Wang

As a biodegradable and non-petrochemical produced polymer, poly (vinyl alcohol) (PVA) films have great potential in packaging fields due to their excellent oil resistance, gas barrier capacity, and mechanical performance. Yet the high flammability of PVA films always draws the fire risks even at an instant contact with fire or voltaic arc, which is demanding the fireproof ability. The traditional method of adding inorganic flame retardants and organic phosphate ester will raise mechanical problems, opacity, and food toxicity that shall not be utilized in the future. Herein, we propose a multiple cross-linking method by introducing bio-based β-cyclodextrin (CD) and phytic acid (PA) to endow PVA composite film (PCP) the fireproof and antibacterial capacity and retain the mechanical properties and transmittance. The results indicated that due to the catalytic charring effect of PA and CD, the peak heat release rate and total heat release of PCP 0.25 decreased by 63.3 % and 38.8 %, respectively. The char residues increased from 6.1 to 32.1 wt% and reached to UL-94 V-0 rating. Thanks to the physically cross-linked network formed by CD and PVA and the chemically cross-linked network formed by PA and PVA, the tensile strength and elongation at break of PCP 0.25 increased from 61.6 MPa and 224.3 % for PVA to 87.6 MPa and 382.0 %, respectively. The transmittance of PCP 0.25 in the visible light range was almost identical to that of pure PVA. While its ultraviolet light transmittance was below 10 %, demonstrating excellent transparency and UV-shielding property. In vitro antibacterial tests, due to the abundant phosphate groups in PCP 0.25 , enzymes on the surface of bacterial cell walls could be deactivated, leading to bacterial lysis and death, thereby exhibiting inhibitory effects against both Escherichia coli and Staphylococcus aureus . Moreover, compared to the commercial food preservation materials, the composite film shows better water vapor barrier ability, which also shows excellent fire resistance, presenting the great prospective in food preservation.

CAS / MDL: 83-86-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2025 · IF 7.5

Al-based alloys (Al–Ti, Al–Zr, Al–Mo) in composite propellants: multifaceted optimization of combustion and energetics

Huanhuan Gao,Daolun Liang,Yadong Sun,Jianzhong Liu

To address space constraints in solid rocket motors, this study investigates Al–Ti, Al–Zr, and Al–Mo alloys. Their high density enhances energy release per unit volume. Multidimensional analyses—thermal oxidation behavior, ignition/combustion characteristics, and agglomeration properties—were conducted to elucidate how high-density alloys influence Al-based propellant combustion performance and energy release. Results show these high-density alloys exhibit shorter ignition delay time and combustion time, effectively increasing the propellant burning rate of propellants while reducing the pressure exponent. Titration measurements reveal combustion efficiencies of 84.28% (A), 87.33% (AT), 86.79% (AZ), and 85.91% (AM). Among them, Al–Zr demonstrates the most significant optimization effect on combustion performance. Due to the low ignition threshold, Al–Ti significantly suppresses agglomerate formation and accelerates the combustion. Meanwhile, Al–Mo enhances the transport efficiency of oxidizing gases through the phase-change sublimation mechanism of MoO 3 , indirectly boosting combustion efficiency. Furthermore, this work reveals the synergistic mechanisms by which high-density alloys optimize propellant combustion performance via multiple factors. The findings confirm the technical feasibility of simultaneously achieving superior combustion performance, high energy output, and effective agglomeration suppression, providing theoretical and technological guidance for developing advanced high-energy-density solid propellants.

CAS / MDL: 2432-87-3 4098-71-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。