文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第1717至1728个,产品总数347,389个

切换升序
MINERALS ENGINEERING · 2025 · IF 5

Flotation behavior, adsorption mechanism and separation application of polyetheramine in quartz-mica system under acid-free and alkali-free conditions

Xuesong Jiang,Jifei Sun,Boyuan Ban,Ling Wang,Linhua Hu,Jian Chen

This study investigates the novel application of polyetheramine (PEA) as an eco-friendly collector for quartz-mica flotation separation under pH-neutral conditions, focusing on its flotation behavior, adsorption mechanisms, and separation efficacy compared to the conventional dodecylamine (DDA). The single mineral flotation demonstrated the superior selectivity of PEA, achieving an 87 % flotation recovery differential (93 % for quartz vs. 6 % for mica), significantly outperforming the 26 % differential of DDA. The mixed minerals (mass ratio: Quartz/Mica = 2/1) flotation shows that PEA can effectively separate the quartz and the mica. Composition analysis shows that the flotation product phase composition is consistent with the single mineral. The quartz content in the 2nd froth product reaches 95.88 % (78.86 % recovery). The mica content in the sink product reaches 71.19 % (91.09 % recovery). Adsorption test analysis indicates that PEA and DDA are mainly adsorbed on minerals by electrostatic adsorption through the ─NH 3 + group. DFT calculations show that the difference in PEA adsorption energy between the quartz and the mica surfaces is 1.52 eV (DDA is only 0.2 eV). Based on the above results we analyzed the adsorption and separation mechanisms. The findings establish PEA as a sustainable alternative to conventional pH-dependent collectors, eliminating acid/alkali consumption while maintaining high separation efficiency.

CAS / MDL: 124-22-1 9046-10-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of the Taiwan Institute of Chemical Engineers · 2025 · IF 6.3

A durable biomimetic nest-shaped superhydrophobic/ anti-icing material derived from wood fibers

Yihan Wang,Yihao Wang,Jianjun Cheng,Chun Chen,Fei Zhan,Lei Wang,Guoyong Song

Background Durable superhydrophobic coatings offer a pleasing visual experience and robust self-cleaning capabilities, providing reliable support for enhancing living quality and industrial safety. In the manufacturing of modern superhydrophobic coatings, especially those derived from natural and renewable biomass materials, abrasion resistance, practicality, and the application performance of various colors have become key considerations. Wood fiber, a natural, abundant and sustainable material, has great potentials in hydrophobic material application due to its low-cost, biodegradation, UV resistance properties. Methods In this study, a biomimetic bird's nest-shaped material with multicolored durable superhydrophobic functions achieved by modifying wood fiber with ZnO nanoparticles and fluorination was developed, which takes the form of powder, flexible film, and solid powder paint. Significant Findings Compared to traditional hydrophobic paints, it can be easily applied to various substrate surfaces with desired colors, including flexible tapes and paper, rigid glass and steel plates, providing a feasible solution for the low-cost, excellent durability, multi-functional, and high-value utilization of superhydrophobic materials.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PROGRESS IN ORGANIC COATINGS · 2025 · IF 7.3

Enhanced wet Interface bonding and protective properties of dopamine and PDA@MXene composite modified biomass polyurethane coatings

Wei Chen,Zhirui Zhu,Xingyang He,Ying Su,Chao Yang,Zihao Jin,Huahui Qi,Cong Tian,Zewen Wu,Shiyu Guan,Dakun Tang

Exploiting biomass polyurethane (PU) coatings derived from vegetable oil adhere to sustainable development strategy, however it faces challenge like inferior wet bonding performance and insufficient protective properties to concrete under harsh marine environment. In this work, inspired by the catecholic chemistry of mussels, the eco-friendly biomass PU was synthesized by hydroxylation and stepwise polymerization of epoxy soybean oil, and by utilizing the catechol-based chemical covalent crosslinking combined with incorporation of polydopamine (PDA) surface modified MXene to composite modify the biomass PU, aiming at enhancing the interfacial bonding performance on moist concrete and its protective properties simultaneously. The Biomass PU composite coating's mechanical and thermal properties, crystallinity, UV aging resistance, water resistance and protective performance of concrete were systematically investigated, the interfacial bonding on wet substrates and protection mechanisms between the Biomass PU and cement-based materials were also revealed. The results demonstrated that DA covalent cross-linking and incorporating PDA@MXene nanosheets into the biomass PU composite significantly enhanced the wet bonding and protective performance to the cementitious substrate. The synergistic enhancement effects of cohesion strength of the biomass PU and favorable interfacial interaction promote the wet bonding strength. The strong covalent crosslink formed between PDA@MXene and the Biomass PU minimized interfacial defects and improved interfacial compatibility, while the well-dispersed PDA@MXene within the PU matrix created a labyrinth effect that extended the diffusion pathways of water and corrosive ion. This work provided a sustainable approach for constructing high-performance biomass PU coatings, offering an effective solution for the long-term corrosion protection of cementitious materials.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROPOROUS AND MESOPOROUS MATERIALS · 2025 · IF 4.7

Accelerated, impurity-free crystallization of aluminum-rich beta zeolite with aluminophosphate as the aluminum carrier

Zhiping Wang,Rui Zhu,Jiejie Ling,Han Jiang,Lei Liu,Yan Gao,Hailang Liu,Le Xu

Zeolite Beta, discovered in 1967, features a unique three-dimensional (3D) 12-ring channel system and a highly tunable Si/Al ratio (SAR), granting exceptional stability and acidity crucial for catalysis. While conventional hydrothermal synthesis normally yields zeolite Beta with the SAR range of 10–30 using tetraethylammonium hydroxide (TEAOH) as the organic structure-directing agent (OSDA), the discovery of Al-rich natural mineral (Tschernichite) with the ∗BEA topology (SAR∼3.3) spurred efforts to synthesize low-SAR Beta zeolite for enhanced acid site density, hydrophilicity and ion-exchange capacity, enabling applications like dehydration, separation and shape-selective catalysis. However, achieving low SARs for the hydrothermal crystallization of zeolite Beta is still challenging, requiring excess Na + which promotes impurity phases (e.g., GIS , ANA , MOR ), prolongs crystallization period and reduces yield. Inspired by our recent work on the kinetic-control synthesis of high-silica NaY zeolite using aluminophosphate as the aluminum carrier, this study presents an accelerated, impurity-free synthetic route to achieve Al-rich zeolite Beta. Using the pre-synthesized aluminophosphate (e.g., AlPO-5) as a partial Al source favors the formation of a silica-rich Beta zeolite nucleus, thus effectively suppresses impurities (eliminating GIS phase in Na + -containing system) and amorphous phase (in Na + -free system), ultimately accelerating crystallization process. Based on this synthetic control, this study successfully synthesized the phase-pure Beta zeolite at SAR of 7.55 (Na + -free) and 6.58 (Na + -containing), while this strategy was extended to the Beta zeolite synthesis with other aluminophosphate, including SSZ-51 ( SFO) and AlPO-18 ( AEI) .

CAS / MDL: 555-31-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
BIOSENSORS & BIOELECTRONICS · 2025 · IF 10.5

A peri-wound wearable system for dual-modal monitoring and management of healing dynamics

Kangdi Guan,Hongshi Ren,Shiyao Deng,Ying Li,Jinpeng Du,Zhao Li,Muchun He,Xiaobing Fu,Sha Huang,Yuxiang Shi,Zhirong Liu,Di Chen,Guozhen Shen

Monitoring wound physiological conditions and implementing timely intervention are crucial for preventing chronic transformation. While flexible bioelectronics offer the potential for real-time wound assessment, existing technologies predominantly rely on wound-contact measurements, which may disrupt the fragile wound microenvironment and even pose infection risks. Here we present a peri-wound wearable system combined impedance and oxygen saturation (SpO 2 ) monitoring, enabling a non-contact, dual-modal evaluation of the healing process through tissue regeneration status and microcirculatory dynamics. The system incorporates a bio-adhesive hydrogel with hydration-maintaining design for long-term impedance sensing and a perovskite-based photodetector for localized SpO 2 quantification, both with distinct relevance to wound structural remodeling and functional recovery. In mouse models of excisional, burn and diabetic wounds, experimental results confirmed that the integrated system accurately tracks the healing trajectory, and significantly accelerates wound closure when coupled with tailored electrical stimulation. This peri-wound wearable system achieves concurrent structural-functional evaluation and treatment while avoiding potential disturbance to fragile tissue, offering an innovative paradigm for comprehensive wound management.

CAS / MDL: 79-06-1 9003-05-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
WATER AIR AND SOIL POLLUTION · 2025 ·Vol. 237 ·期 2 ·57 · IF 3

Selective Recovery of Tungsten from Industrial Wastewater via D630 Resin: Performance and Pilot-Scale Application

Wen Xiaoqiang,Liu Yanfen,Zhang Zhifeng,Zhou Qiusheng,Li Zhongqi

This study aims to recover tungsten from tungsten containing smelting wastewater using D630 ion exchange resin. Batch experiments were conducted to investigate the effects of resin dosage, initial adsorption pH value, temperature, and time on tungsten adsorption. The results showed that the resin had an adsorption rate of over 99% for tungsten under the condition of resin dosage of 2.5 g/L, pH value of 1.0–5.0, temperature of 30℃ and adsorption time of 240 min. The adsorption process conforms to the Langmuir model and follows pseudo first order kinetics. XPS and SEM–EDS analysis also confirmed the high adsorption performance of D630 resin for tungsten in wastewater. In order to investigate the adsorption performance of resin on tungsten in actual tungsten containing smelting wastewater, a pilot scale column adsorption–desorption experiment was conducted using 500 L of D630 resin. A total of 456 m 3 of tungsten containing wastewater was treated, and the tungsten adsorption rate reached 98.0% after approximately 440 m 3 of wastewater flow. When the resin has not reached saturation adsorption, the tungsten content in the effluent is less than 1 ppm. The saturated adsorption resin was desorbed with 12% NaOH to obtain 218.55 g/L tungsten rich solution.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2025 · IF 7.5

CH4 decomposition using catalyst pellets prepared from red mud and calcium carbide slag under fluidization for the production of H2 and carbon-based anode materials

Zhiwei Chu,Wenzhe Zhang,Wenhan Zhao,Duo Xu,Zirui He,Kuihua Han,Yingjie Li

H 2 and solid carbon are available through the CH 4 decomposition with Fe-based catalysts. Red mud is a solid waste containing lots of Fe 2 O 3 . In this work, the CeO 2 -doped solid waste-based catalyst pellets were prepared by the extrusion-spheronization method using red mud and calcium carbide slag for catalytic decomposition of CH 4 . The mass ratio of red mud to calcium carbide slag was 1:3. Regeneration of catalyst pellets with carbon deposits was performed by sieving separation and steam gasification. The effects of CeO 2 , catalyst pellet diameter, fluidization velocity, ratio and type of pore forming agent (bagasse, corn cob, horsetail pine, and walnut), ratio of binder (polyvinylpyrrolidone (PVP)), and pellet calcination duration on CH 4 decomposition and regeneration of catalyst pellets were studied in a fluidized bed reactor. The electrochemical performance of the Na-ion battery using the partial solid carbon materials from CH 4 decomposition as the anode materials was evaluated. The heat and mass transfer performance of catalyst pellets in fluidized state is enhanced. The initial CH 4 conversion is 88% in the first catalysis/regeneration cycle at 850 °C with the catalyst pellet diameter of 250–425 µm, calcination duration of 60 min, corn cob addition of 3 wt%, PVP addition of 2 wt% and fluidization velocity of 0.07 m/s. The CO 2 capture by CaO in catalyst pellets during gasification boosts the residual carbon deposits removal. The reversible sodium storage capacity of the Na-ion battery using solid carbon as the carbon-based anode material is 392.0 mAh/g. The CeO 2 -doped solid waste-based catalyst pellets are beneficial to the H 2 production, high-value utilization of solid carbon, and CO 2 capture via CH 4 decomposition and regeneration process.

CAS / MDL: 10294-41-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
WATER AIR AND SOIL POLLUTION · 2025 ·Vol. 237 ·期 1 ·8 · IF 3

Adsorption of Methylene Blue using Poly(N-vinylpyrrolidone)-Graphene Oxide Composite: Kinetics, Equilibrium, Thermodynamics, and Mechanisms

Li Xiaoya,Zheng Ru,Duan Guangyu,Cao Zhanfang,Han Kai,Zhong Hong,Ma Xin,Wang Shuai

A poly( N -vinylpyrrolidone)-graphene oxide (NVP-GO) composite with high adsorption capacity for methylene blue (MB) was synthesized and comprehensively characterized using SEM, XRD, FT-IR, TG, elemental analysis, nitrogen physical adsorption, and XPS. The adsorption of MB onto NVP-GO was examined in relation to several variables, including contact time, adsorption temperature, initial concentration of MB, and pH. Adsorption kinetics, isotherms, and thermodynamics were thoroughly investigated. The adsorption kinetics followed the pseudo-second-order model, and the Langmuir isotherm model indicated a monolayer adsorption pattern of MB onto NVP-GO, with the maximum adsorption capacities ranging from 116.6 to 161.3 mg·g −1 at temperatures between 25 and 45 °C. Thermodynamic assessments and activation energy calculations demonstrated that the adsorption process was spontaneous, endothermic, and ​controlled by chemical activation. XPS analysis highlighted the significance of electrostatic interactions, n–π interactions, π–π stacking, and hydrogen bonding in mediating the adsorption mechanisms between NVP-GO and MB. Notably, NVP-GO maintained stable adsorption efficiency over three consecutive adsorption–desorption cycles, highlighting its potential as a promising adsorbent for wastewater treatment. Graphical

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PROGRESS IN ORGANIC COATINGS · 2025 · IF 7.3

Dual-functional SiO2 microspheres with rosin and PEG shells for stable, high-adhesion water-based inks

Shuqun Zhang,Yiyuan He,Peng Xiang,Jun Li,Yunfei Zhi,Yunfei He,Shaoyun Shan

Water-based inks offer a sustainable alternative to solvent-based systems, yet their performance remains limited by particle sedimentation, poor dispersion, and insufficient film adhesion. In this study, multifunctional hybrid microspheres (SiO 2 -g-R-P) were synthesized by sequentially grafting rosin-derived acrylates and polyethylene glycol (PEG) onto silica particles. The rosin shell enhances compatibility with polyurethane–acrylic binders, while PEG chains provide steric stabilization and hydrophilicity. When incorporated at 1.5 wt% into water-based inks, the modified microspheres markedly improved dispersion stability (ζ potential = −51.6 mV), suppressed sedimentation for over 60 days, and enhanced low-shear viscosity by forming a weak reversible 3D particle network, with the formation of this network demonstrated via oscillatory rheometry (average G″ = 0.35 Pa, average G′ = 7.82 Pa). The resulting inks achieved high-resolution image transfer and strong substrate adhesion (ASTM D3359 rating 2B to 5B) on both paper and steel substrates, outperforming the unmodified formulation. These improvements stem from the synergistic effects of hydrogen bonding, steric hindrance, and particle–matrix interactions at the ink–film interface. This surface-engineering strategy provides a scalable and environmentally friendly approach for developing high-performance inks with enhanced print fidelity, mechanical durability, and colloidal stability across various substrate types.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2025 · IF 7.5

Mechanochemical force-driven stepwise activation and reconstruction of carbon-ash in coal-based solid wastes and pollutant removal

Li Zhu,Jing Ma,Yuyu Wang,Song Qiao,Min Xu,Bolong Zhao,Lei Wang,Tianmiao Zhang,Yonggang Sun,Yulong Ma

As a common solid waste in the coal chemical industry, coal gasification fine slag (CGFS) requires resource utilization, which is an inevitable requirement for the clean development of coal chemical enterprises. In this work, composite materials (M x CGFS-800-H) were fabricated from CGFS as the raw material via a desilication-reconstruction-pore expansion strategy using different activators. Characterization results showed that adsorption sites and abundant pore structures (with a specific surface area of 221.73 m 2 /g) were provided for the catalyst by residual carbon; nepheline formation was promoted by NaOH, iron species were stabilized, and aluminum elements were removed during acid washing, ensuring that iron species were transformed into active sites. Specifically, M N1 CGFS-800-H activated by NaOH exhibited excellent performance in activating peroxymonosulfate (PMS) for the degradation of bisphenol A (BPA). The carbon-ash synergy enabled M N1 CGFS-800-H to remove 99.60 % of BPA within 60 min, with a mineralization degree reaching 52.85 %. Functional groups (C=O) and iron species were responsible for the generation of reactive oxygen species (ROS), thereby facilitating the degradation of pollutants. The M N1 CGFS-800-H/PMS system showed strong resistance to saline ions interference and was highly reusable. This study provided a new method for the synergistic utilization of carbon and ash in CGFS.

CAS / MDL: 95-14-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SOLAR ENERGY MATERIALS AND SOLAR CELLS · 2025 · IF 6.3

A Cd-diffusion strategy to prepare Cu2CdSnS4 thin films for solar cells

Getinet Yenealem Ashebir,Chao Dong

We present a Cd-diffusion strategy to fabricate large-grained, phase-pure Cu 2 CdSnS 4 absorber films by sulfurizing a solution-processed bi-layer CdS/Cu 2 SnS 3 films. The key novelty lies in using Cd diffusion from a thin underlying CdS layer to uniformly convert a Cu 2 SnS 3 layers into Cu 2 CdSnS 4 , successfully eliminating the small-grained bottom layer that typically plagues solution-processed kesterite/stannite films. We demonstrate that the phase transformation to pure Cu 2 CdSnS 4 is governed by the final Cd content in the film matrix, not by the Cd diffusion length. Optimized films, obtained at a sulfurization temperature of 550 °C, exhibit ideal optoelectronic properties with a band gap of ∼1.40 eV and a high absorption coefficient (>10 5  cm −1 ). Solar cells in a FTO/TiO 2 /Cu 2 CdSnS 4 /P3HT/MoO 3 /Ag configuration achieve a power conversion efficiency of 3.81 %, attributed to the high-quality, large-grained Cu 2 CdSnS 4 absorber. This work provides a promising pathway for developing efficient thin-film solar cells with homogeneous morphology.

CAS / MDL: 7704-34-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PROGRESS IN ORGANIC COATINGS · 2025 · IF 7.3

A novel smart pH-responsive nanocomposite based on cerium-polyphenol -amine self-assembly for anticorrosion waterborne epoxy coatings

Peng Xu,Xinwei Wang,Tianguan Wang,Xinyu Zhao,Jingsha Tan,Wenfeng Ge,Bo Zhang,Guozhe Meng

To overcome the limited protective performance of waterborne epoxy (WEP) coatings, a novel scalable cerium-polyphenol-amine ternary system (Ce-TA-PEI, CTP) was synthesized via a simple dynamic supramolecular self-assembly strategy. The material effectively anchored corrosion-inhibiting cerium ions within its network through cerium-phenolic coordination, achieving an exceptionally high cerium loading capacity of 20.3 wt%. The polyphenol–amine crosslinked network of the CTP nanocontainer can form chemical bonds with the epoxy matrix, ensuring good interfacial compatibility and significantly reducing the intrinsic defects of the coating. Consequently, the dry and wet adhesion strengths of the coating increased to 3.13 MPa and 2.99 MPa, respectively. After 60 days of immersion in 3.5 wt% NaCl solution, the | Z | 0.01Hz value of CTP2/WEP remained as high as 1.21 × 10 9  Ω·cm 2 , more than an order of magnitude greater than that of pure WEP (1.05 × 10 8  Ω·cm 2 ). In addition, UV–Vis analysis confirmed that CTP is pH-responsive and can sustain continuous cerium release for up to 144 h. This behavior arises from changes in coordination strength between cerium ions and phenolic hydroxyl groups, together with variations in electrostatic interactions within the CTP framework under different pH conditions, which promote rapid cerium release in acidic environments. When incorporated into WEP coatings, this “smart” nanocontainer responded dynamically to localized acidic corrosion at coating defects. It not only enhanced the physical barrier properties of the coating but also imparted active self-healing functionality. This work therefore provides a new strategy for advancing environmentally friendly WEP coatings toward broad engineering applications.

CAS / MDL: 7647-01-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。