Artificial Cells Nanomedicine and Biotechnology
·
2017
·
IF 5.605
Min Hu,Chenwen Li,Xin Li,Min Zhou,Jianbin Sun,Fangfang Sheng,Sanjun Shi,Laichun Lu
The anti-infection ability and skin regeneration are important aspects on the progress of wound healing, which needs an ideal wound dressing that not only resists bacteria but also promotes skin regeneration. In this study, zinc oxide/silver/polyvinylpyrrolidone/polycaprolactone (ZnO/Ag/PVP/PCL) nanofibres were prepared through electrospinning. Firstly, zinc oxide nanoparticles (ZnONPs) and silver nanoparticle (AgNPs) were synthesized respectively. Secondly, the two nanoparticles were mixed with polyvinylpyrrolidone (PVP) and polycaprolactone (PCL) to obtain the nanofibres. The results of scanning electron microscopy (SEM) showed that ZnONPs and AgNPs were 40.07 ± 9.70 nm and 37.46 ± 12.02 nm, respectively. After electrospinning, the nanofibres were 368.22 ± 123.96 nm in diameter. Infrared spectroscopy revealed that ZnONPs/AgNPs bimetallic nanomaterials were physically embedded in the nanofibres. The antibacterial effects against Staphylococcus aureus and Escherichia coli of ZnO/Ag/PVP/PCL nanofibres were significantly better than these of the single metal material-loaded nanofibres. More importantly, the combination of ZnO and Ag reduced the cytotoxicity of ZnO/Ag/PVP/PCL bimetallic nanofibres toward fibroblasts. These findings demonstrated that ZnO/Ag/PVP/PCL bimetallic nanofibres should be of greater interest than the single metal nanomaterial-loaded nanofibres in inhibiting growth of bacteria.
研究领域:
材料科学
·
纳米技术
·
生物材料
·
伤口愈合
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Biomaterials Advances
·
2022
·
IF 0
Ting Dai,Jiayi Ma,Su Ni,Chun Liu,Yan Wang,Siyu Wu,Jun Liu,Yiping Weng,Dong Zhou,Ana Jimenez-Franco,Hongbin Zhao,Xiubo Zhao
Electrospun PCL scaffolds have been widely used for tissue engineering as they have shown great potential to mimic the structure of the natural extracellular matrix (ECM). However, the small pore size and low bioactivity of the scaffolds limit cell migration and tissue formation. In this study, PCL (polycaprolactone), PCL/PEG (polyethylene glycol), and PCL/PEG/ATP (nano-attapulgite) scaffolds were fabricated via electrospinning. To increase the porosity of the scaffolds, they were washed to remove water-soluble PEG fibers. Then the porous structure was measured using scanning electron microscopy (SEM) and atomic force microscopy (AFM), which showed an increased porosity when PEG fibers were removed in PCL/PEG and PCL/PEG/ATP scaffolds. Moreover, the mechanical properties were also analyzed in dry and wet conditions. In vitro mouse multipotent mesenchymal precursor cells were used to assess the biocompatibility of the scaffolds, and osteogenesis was analyzed using CCK-8 and real-time PCR (RT-PCR) methods. Moreover, in vivo μCT, histological and immunohistochemical analyses were conducted to evaluate new bone formation in rat cranium defect models. Washed PCL/PEG/ATP scaffolds were implanted into the cranium defects in rats for 4 or 8 weeks, better cell infiltration was observed in these scaffolds than in unwashed ones. The result demonstrated that washed PCL/PEG/ATP scaffold facilitated the differentiation of MSCs into osteoblasts compared with PCL scaffold, as proved by the increased expression of osteogenic key genes as well as Smad1, Smad4, and Smad5. Furthermore, in vivo studies demonstrated that using the ATP-doped electrospun PCL scaffold can improve the bone regeneration of rat cranium defects. Particularly, the PCL/ATP-30% scaffold has the best effect compared to the other scaffolds. The enhanced osteogenesis and bone repair were related to the PCL/ATP activated BMP/Smad signaling pathway.
研究领域:
组织工程
·
材料科学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
Coatings
·
2023
·Vol. 13
·期 3
·500
·
IF 3.4
Maolin Liu,Changqing Lin,Weicheng Ou,Han Wang,Chunyang Pan,Yuchen Ji,Hehui Zheng
Metal halide perovskite quantum dots (PQDs) are widely used in the display field due to their excellent photoelectric properties, such as ultra-narrow half-peak widths and ultra-pure luminescence color purity. Inkjet printing, laser direct writing and electrospinning are all common methods for PQDs printing to prepare micropattern displays. In order to produce large-scale and high-resolution PQDs micropatterns, electrohydrodynamic (EHD) printing technology is capable of large-scale deposition of highly oriented nanofibers on rigid or pliable, flat or bent substrates with the advantages of real-time regulation and single control. Therefore, it has a lot of potential in the fabrication of pliable electronic devices for one-dimensional ordered light-emitting fibers. Polycaprolactone (PCL) as an EHD printing technology polymer material has the advantages of superior biocompatibility, a low melting point, saving energy and easy degradation. By synthesizing CsPbBr3quantum dots (QDs) and PCL composite spinning stock solution, we used the self-built EHD printing platform to prepare the PCL@CsPbBr3composite light-emitting optical fiber and realized the flexible display of high-resolution micropatterns in polydimethylsiloxane (PDMS) packaging. An x-ray diffractometer (XRD), scanning electron microscope (SEM) and photoluminescence (PL) were used to characterize and analyze the fiber’s morphology, phase and spectral characteristics. EHD printing technology may open up interesting possibilities for flexible display applications based on metal halide PQDs.Keywords:perovskite;flexible display;photoluminescent fibers;EHD;CsPbBr3
研究领域:
材料科学
·
光学工程
·
显示技术
✓ 已验证
产品关联
DOI
高影响因子
Membranes
·
2023
·Vol. 13
·期 7
·622
·
IF 4.2
Mona Saad Binkadem
The effluents of industrial wastewater contain several toxic organic and inorganic pollutants that may contaminate clean and freshwater sources if untreated or poorly treated. These toxic pollutants include colors; hazardous compounds; surfactants; cosmetics; agrochemicals; pharmaceutical by-products; and agricultural, pharmaceutical, and medical contaminants. Treating wastewater has become a global problem. Many projects have been started in the last two decades to treat wastewater, resultant water pollution, and associated waste management problems. Adsorbants based on graphene oxide (GO) are viable wastewater treatment materials due to their adaptability, photocatalytic action, and capacity for self-assembly. Here, we report the fabrication of nanofibrous mats from polycaprolactone (PCL), carboxymethyl arabinoxylan (CMARX), and carboxyl-functionalized-graphene oxide using an electrospinning technique. The silver nanoparticles were loaded onto the mat to enhance their photocatalytic activity. These mats were characterized using different techniques, including Fourier transform infrared (FTIR), scanning electron microscope (SEM), and transmission electron microscope (TEM). The water contact angles were used to study their hydrophilic and hydrophobic behavior. The Langmuir isotherm model and adsorption kinetics were studied to evaluate their adsorption capabilities against methylene blue (MB). Sample 2 followed the Langmuir isotherm model (R2= 0.9939). Adsorption kinetics exhibited pseudo-second order behavior (R2= 0.9978) due to their maximum correlation coefficient values. MB has excellent adsorption at room temperature and the formation of the monolayer at the surface of the adsorption mat. An enhanced PO43−and MB adsorption was observed, providing recyclability up to 4–5 times. Hence, the fabricated nanofibrous mat would be a potential candidate for more effective wastewater treatment applications.Keywords:adsorption;bacterial cellulose;electrospinning;thin nanofibrous mat;wastewater treatment;environmental pollution treatment
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS TECHNOLOGY
·
2024
·
IF 2.9
Mengcheng Xu,Maolin Zhao
Among deaths related to cardiovascular disease (CVD), arteriosclerosis accounts for three-quarters of the total. The most common treatment for arteriosclerosis is revascularization through the implantation of endovascular scaffolds. However, most metal scaffolds currently available are non-biodegradable, which can lead to rejection reactions. In this study, we have developed a CMCS-PEI/miR polysaccharide nucleic acid nanodrug loaded with miR-199a-5p for the first time. The CMCS-PEI/miR polysaccharide nucleic acid nanodrug exhibits good blood compatibility, successfully transfects cells, and induces apoptosis of vascular endothelial cells. Additionally, PCL/GO composite scaffolds with excellent mechanical properties and biocompatibility were fabricated using 3D printing technology. This technology allows for the customisation of scaffolds to meet the needs of individual patients. The 3D-printed PCL/GO composite scaffolds loaded with CMCS-PEI/miRNA polysaccharide nucleic acid nanodrug effectively induce apoptosis of vascular endothelial cells, showing great potential in promoting the functional repair of arteriosclerosis and preventing vascular restenosis.
研究领域:
心血管疾病
·
生物材料学
·
分子生物学
·
组织工程
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 97
·79969-79975
·
IF 3.84
Xiaodong Cao,Wenxiu Li,Ting Ma,Hua Dong
We report in this paper a one-step route for the preparation of core–shell, patchy, patchy Janus and Janus particles via a microfluidic-assisted phase separation process. As a proof of concept, PLGA/PCL hybrid particles are fabricated and the results show that the four types of particles can be harvested with high yield and narrow size distribution by precise control over the phase separation process, or namely, interfacial tensions and spreading coefficients between immiscible phases, after generation of the single emulsion in microchannels. This new strategy described herein is rather simple and versatile for producing a wide range of other particles with simultaneously controlled size, shape and anisotropy.
研究领域:
材料科学
·
化学工程
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2017
·
IF 3.887
Delin Cheng,Qingfei Liang,Yonggang Li,Jiahui Fan,Guocheng Wang,Haobo Pan,Changshun Ruan
Although heterogeneous bone scaffolds have shown potential in bone defect repair, their capability of aiding bone regeneration need to be further enhanced. Strontium, one important trace element in bone, has a well-known favorable effect on bone repair. Here a strontium containing scaffold (CPB/PCL/Sr) based on superficially porous calcined porcine bone (CPB) was obtained straightforwardly by sequential coating of SrCl 2 and polycaprolactone (PCL). The basic characterization revealed that PCL coating could simultaneously improve the mechanical properties and, more importantly, restrain strontium release. Moreover, in vitro behaviors of human MSCs on CPB, CPB/PCL, and CPB/PCL/Sr were studied in detail. The comprehensive results of proliferation, osteogenic gene expression, ALP staining, and ALP activity demonstrated that PCL coating slightly impaired the bone repair potential of CPB. In contrast, CPB/PCL/Sr better supported the osteogenic differentiation of MSCs than CPB，highlighting the role of strontium. The in vivo test confirmed a better new bone formation of CPB/PCL/Sr than CPB and CPB/PCL. These results verified the superiority of incorporating strontium to improve the bone-forming ability of CPB, offering a promising alternative for bone defect repair.
研究领域:
生物医学工程
·
组织工程
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2019
·
IF 4.959
Zetao Wang,Ruiming Liang,Xianfang Jiang,Jiali Xie,Peian Cai,Haimin Chen,Xintang Zhan,Danqing Lei,Jinmin Zhao,Li Zheng
Nanofibers as niche-biomimetic scaffolds hold promise in guided bone regeneration (GBR). Here we fabricated poly (lactic- co -glycolic acid) (PLGA)/poly(caprolactone) (PCL)-doped octacalcium phosphate (OCP) nanofiber membranes via electrospinning and investigated the osteogenic behavior of marrow mesenchymal stem cells (MSCs) on the membranes. By adjusting different ratio of OCP to PLGA/PCL, three hybrid stents including PLGA/PCL, PLGA/PCL/2 wt%OCP, PLGA/PCL/4wt%OCP were successfully prepared. The PLGA/PCL/OCP membranes showed a decrease in fiber diameter compared with PLGA/PCL, leading to enhanced mechanical strength. In-vitro studies showed that PLGA/PCL/OCP membranes better supported cell adhesion, spreading and proliferation than PLGA/PCL. The incorporation of OCP via electrospinning also endowed the membranes with osteoinductive capacity, as evidenced by activation of ALP activity, increased gene expression of bone specific markers (such as Runx2 , ALP , Col 1a1 , OPN , OCN , BMP2 ), and mineral nodules formation compared to PLGA/PCL. Comparatively, PLGA/PCL/4wt%OCP showed better mechanical and biological performance than PLGA/PCL/2 wt%OCP, demonstrating the role of OCP in nanofiber membranes. Thus, the electrospun PLGA/PCL/OCP nanofiber membranes can be potentially developed as a promising hybrid stent for GBR.
研究领域:
生物材料
·
组织工程
·
干细胞生物学
·
生物医学工程
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
·
2018
·
IF 1.911
Cheng Zhao,Xiuwen Wu,Guopu Chen,Feng Wang,Jianan Ren
Accelerating wound healing with modified biomaterial has been an attracting field in both material science and medicine. Enhanced cell adhesion could be acquired by improving surface hydrophilicity, which contributes to accelerating wound healing. Chemical reaction has been used for surface modification, but this study used a simple and nontoxic method to improve the hydrophilicity. Polycaprolactone (PCL) scaffold has been regarded as promising material for wound healing while its surface is hydrophobic. Our study demonstrated enhanced hydrophilicity of PCL with AuNPs coating. AuNPs has good biocompatibility and excellent photothermal effect. The coating of AuNPs not only improved the cell adhesion, but also gave PCL the ability to inhibit the growth of bacteria. Animal study showed that the nanocomposites decreased lymphocytes and neutrophils, increased neovascularization and accelerated the abdominal wound healing, which was attributed to improved hydrophilicity and the antibacterial ability. In conclusion, we demonstrated that the nanocomposite could be used as a potential scaffold for cell adhesion and wound healing, and the role of AuNPs was highlighted as a kind of outstanding supplement.
研究领域:
生物材料学
·
纳米医学
·
组织工程
·
创伤修复
·
生物相容性
·
光热治疗
·
表面改性
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Bio Materials
·
2026
·
IF 4.7
Lei Kang,Chunquan Ma,Xiajie Hu,Xudong Wu,Rong Shan,Fuxiang Song
Bone tissue engineering scaffolds are used to repair dimensional alveolar crest defects resulting from etiologies such as trauma, infection, or tumor resection, thereby enabling a more accurate, efficient, and predictable dental diagnosis and treatment. In this study, cone beam computed tomography (CBCT) data from patients with alveolar crest defects were utilized to design a personalized scaffold. Subsequently, the 3D PCL/β-TCP scaffold was successfully fabricated based on this design using 3D printing technology. In parallel, a comprehensive series of assays were conducted to evaluate the properties of the 3D PCL/β-TCP scaffold, including its ability to promote MC3T3-E1 cell adhesion and proliferation in vitro. Furthermore, its capacity to induce bone formation was assessed in an in vivo animal model. The results demonstrated that the scaffold exhibited excellent biocompatibility, as evidenced by CCK-8 and live/dead (AM/PI) fluorescence staining assays, and significantly facilitated the adhesion and proliferation of MC3T3-E1 cells. Additionally, ALP and Alizarin Red staining experiments indicated that the 3D PCL/β-TCP scaffold significantly enhanced ALP expression and calcified nodule formation. Finally, the in vivo experiments in rats with skull defects confirmed that the 3D PCL/β-TCP scaffold contributed to accelerated bone formation. In summary, owing to numerous favorable properties such as personalized customization, biomimetic porous architecture, and excellent osteogenic ability, the 3D PCL/β-TCP scaffold was confirmed to be an advantageous candidate, offering ideas and effective methods for the precise repair of the alveolar crest.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Bio Materials
·
2026
·Vol. 9
·期 15
·7069-7080
·
IF 5.6
Chi Chunyu,Gao Yuantao,Chen Jiazhu,Ge Xuejun,Gao Zexing,Li Yinggang,Yan Shuang
The delayed healing of skin wounds poses significant health risks and increases medical burdens, necessitating the development of multifunctional dressings that can actively monitor and promote the healing process. In this study, a multifunctional CeO 2 /PCL nanofibrous scaffold integrating real-time pH sensing, enhanced stem cell adhesion, and antioxidant functions was developed. A series of composite scaffolds with tunable CeO 2 nanoparticle loadings (7.1–31.6 wt %) were fabricated via a facile one-step electrospinning technique. Notably, the CeO 2 /PCL-13.3 wt % scaffold achieved an optimal balance of tensile strength (1.927 MPa) and elongation at break (70%), fully satisfying clinical wound dressing requirements. Phenol red loading enabled naked-eye pH monitoring (4.0–10.0) via metal−phenolic coordination. Comprehensive evaluations demonstrated that the composite scaffolds exhibited significant antibacterial activity, potent reactive oxygen species scavenging capability, and excellent biocompatibility. The scaffolds maintained over 80% human umbilical cord mesenchymal stem cells viability within 72 h and significantly promoted stem cell migration in wound healing assays. This integrated platform unifies visual diagnostics and therapeutic functions for advanced wound management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Shuyue Long,Ying Huang,Zhihao Lin,Sujuan Yan,Xiaoyi Luo,Xia Ren,Xianjun Fu,Zhengao Wang,Wuyi Zhou
Emulsion electrospinning co-delivered nano cuttlebone and quercetin in fibers. • Nano cuttlebone enabled rapid hemostasis and > 96% antibacterial activity. • Nanofiber membrane afforded antioxidant activity and promoted hemostasis. • The membrane suppressed biofilms and coordinated staged infected-wound repair. Persistent bleeding, bacterial colonization, oxidative stress, and prolonged inflammation are major barriers to the repair of infected wounds. An ideal dressing should rapidly control bleeding and bacterial contamination, while regulating oxidative and inflammatory microenvironments to support tissue regeneration. Herein, a multifunctional PCL-PVA/SA@nano CB composite nanofiber membrane was developed by emulsion electrospinning for infected-wound therapy. In this system, polycaprolactone (PCL) provided structural stability, while the hydrophilic polyvinyl alcohol/sodium alginate (PVA/SA) phase improves wettability, water absorption, breathability, and bioactive-agent delivery. Nano Cuttlebone acted as a calcium-rich component for rapid hemostasis and antibacterial activity, whereas quercetin contributes antioxidant and anti-inflammatory functions. In vitro , the optimized membrane achieved antibacterial efficiencies of 96.72% against S. aureus and 96.58% against E. coli , inhibited S. aureus biofilm formation, scavenged DPPH radicals, and promoted L929 fibroblast proliferation and migration. In vivo , the membrane accelerated hemostasis in a mouse liver bleeding model and promoted S. aureus -infected full-thickness wound healing, reaching 98.9% closure on day 14. The nanofiber membrane also reduced bacterial burden, regulated macrophage polarization, suppressed CD86/TNF-α, enhanced CD206/IL-10, and promoted collagen deposition and re-epithelialization. This study provides a promising multifunctional electrospun dressing for complex infected wounds.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）