CONSTRUCTION AND BUILDING MATERIALS
·
2026
·
IF 8.9
Xiang Tian,Yan Zhan,Jie Wu,Shanchang Yi,Tianyong Jiang,Lei Wang
Silane coupling agents (SCAs) are widely recognized for improving the mechanical performance and crack resistance of geopolymers. However, previous studies have primarily focused on strength enhancement, while the influence of SCAs on crack mode evolution and micro-damage development remains poorly quantified. This study investigates the fracture regulation and damage evolution of methyltrimethoxysilane (MTMS)-modified metakaolin-based geopolymers through an integrated analysis of mechanical behavior, acoustic emission (AE), digital image correlation (DIC), and convolutional neural networks (CNNs). MTMS was incorporated at dosages ranging from 0 to 0.4 wt%, and CNN-based crack mode identification model was developed using a balanced AE dataset containing 1200 tensile and shear cracking signals. The results show that MTMS regulates both strength and fracture behavior in a dosage-dependent manner. The optimum strength enhancement was achieved at 0.2 wt% MTMS, increasing compressive and flexural strengths by 22.9% and 30.8%, respectively, while 0.3 wt% MTMS produced the highest peak displacement and longest time to peak load. AE analysis revealed a transition from instantaneous brittle damage to progressive energy-dissipating fracture with increasing MTMS dosage, whereas excessive MTMS induced defect-related brittleness recovery. The 2D-CNN achieved a validation accuracy of 96.67%, enabling reliable quantification of tensile and shear cracking evolution. CNN classification showed that 0.2 wt% MTMS promoted mixed-mode fracture by reducing tensile crack dominance and increasing shear-related damage activity. Combined DIC-AE analysis identified three fracture stages, including microcrack initiation, stable crack propagation, and unstable fracture. This study provides an intelligent framework for quantitatively linking SCA-induced fracture regulation with micro-damage evolution in geopolymers.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Guangyu Yang,Shihang Li,Yu Feng,Xiaofeng Shi,Lei Li,Qinpei Chen,Guohui Li,Hongyuan Ding,Jianghui Xie,Tiannian Zhou,Feng Yang,Que Huang,Changcheng Liu
Thermal runaway is often accompanied by fire and explosion, causing great harm. Therefore, effective thermal protection materials are currently needed to suppress the occurrence of TRP in power batteries. However, many existing thermal insulation materials have problems such as weak thermal insulation capacity, poor flame retardancy and heavy weight, making them difficult to apply. Therefore, This study synthesized a novel composite material by introducing ammonium polyphosphate (APP) and kaolin (Al₂Si₂O₅(OH)₄) into the sodium alginate (SA) matrix through freeze-drying method. This material has low thermal conductivity as 0.0472 W/m·K and excellent flame retardancy with the 68% limiting oxygen index (LOI) as V-0 level Underwriters Laboratories(UL-94, American combustion test standards) by adding flame retardants. The aerogel sheet used for battery thermal runaway had a thickness of 2 mm. This composite material also effectively suppresses thermal runaway propagation in Lithium-ion batteries, achieving a TRP suppression time of up to 30 min while lowering the peak TR temperature by as much as 400 °C., thereby providing a robust basis for the safe deployment of LIBs.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2026
·
IF 12.7
Yubin Li,Guoliang Dai,Jie Fan,Hong Xiao
Infrared low-emissivity textiles have garnered significant attention for applications in infrared camouflage, smart wearables, and personal thermal management. However, reconciling low emissivity with color diversity and abrasion resistance remains a formidable challenge, with color variety being a major obstacle to practical application. Inspired by maple leaves, we introduce a colored infrared low-emissivity fabric. This is fabricated using a dyed polyester substrate thermally bonded to a transparent TPU film, followed by the sequential spraying of AgNWs and MXene. The resulting fabric exhibits an infrared emissivity as low as 0.16 in the 8–14 μm range, achieves customizable colors, demonstrates exceptional tensile strength (357 N), and maintains a low sheet resistance of 7.82 Ω·sq −1 . The achievable color gamut is among the broadest reported for such textiles. The fabric enables both passive radiative heating and active solar/Joule heating, adapting to thermal demands across diverse environments. Furthermore, it possesses practical wearable attributes, including moisture permeability and flame retardancy. This multifunctional, colored fabric significantly accelerates the practical application of infrared low-emissivity textiles. Download: Download high-res image (426KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Yifei Liu,Defa Liu,Ying Yu,Zumin Wang,Ruziev Umidjon Abdimajitovich,Donaev Sardor Burkhanovich,Semencha Alexander Vyacheslavovich,Lei Wang,Lingbo Zong,Bin Li,Xufang Qian
Fe-Cu dual-atom sites were prepared through pre-coordination and ultrafast Joule heating. • FeCu-N-MCS displays a large E 1/2 , low H 2 O 2 yield and excellent stability. • FeCu-N-MCS suppresses H 2 O 2 accumulation through hydrogen peroxide reduction reaction (HPRR). • Cooperative interaction of dual-atom sites reduces the energy barrier of OH* desorption for 4e⁻ ORR. • Zn-air batteries achieve ultrahigh power density and remarkable charge/discharge stability. The oxygen reduction reaction (ORR) governs the power output and cycling lifetime of metal-air batteries. Fe-N-C single-atom catalysts are among the most promising precious-metal-free ORR electrocatalysts, but their durability is often compromised by H 2 O 2 generated through the competing two-electron ORR pathway, which can trigger Fenton reactions and radical-induced catalyst degradation. Herein, Fe-Cu dual-atom sites anchored on microporous carbon spheres (FeCu-N-MCS) are constructed through a pre-coordination strategy followed by rapid Joule heating. Combined experimental results and density functional theory (DFT) calculations reveal that the electronic coupling between Fe and Cu sites lowers the energy barrier of the rate-determining step for the four-electron ORR pathway. More importantly, the Fe-Cu dual-site configuration enables spontaneous hydrogen peroxide reduction reaction (HPRR) at Fe sites and significantly facilitates OH* desorption during HPRR, thereby suppressing H 2 O 2 accumulation and alleviating Fenton-type oxidative degradation. Consequently, FeCu-N-MCS delivers outstanding ORR performance with a half-wave potential of 0.91 V, a low H 2 O 2 yield below 2.91%, and 91.05% current retention after 100 h. Aqueous Zn-air batteries (A-ZABs) assembled with FeCu-N-MCS achieve a peak power density of 223.73 mW cm −2 and stable cycling for over 1200 h. FeCu-N-MCS-based Quasi-solid-state ZABs (QSS-ZABs) further exhibit an open-circuit voltage (OCV) of 1.52 V and a power density of 246.85 mW cm −2 . This work establishes a dual-atom-site strategy for coupling high ORR activity with H 2 O 2 -resistant durability, offering mechanistic insight into the design of robust precious-metal-free electrocatalysts for advanced metal-air batteries. Download: Download high-res image (220KB) Download: Download full-size image Fe-Cu dual-atom sites were prepared through pre-coordination and Joule heating. The incorporation of Cu sites into Fe-N-MCS not only reduces the energy barrier of the rate-determining step (RDS) to accelerate the 4e⁻ ORR pathway, but also enables spontaneous hydrogen peroxide reduction reaction (HPRR) to suppress H 2 O 2 accumulation and Fenton corrosion. Consequently, the assembled Zn-air batteries achieve remarkable power density and ultra-long cycling stability.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN POLYMER JOURNAL
·
2026
·
IF 6.8
Huaqiang Cao,Yuhan Jiang,Sha Ao,Jia Hu,Jinghua Cao,Lina Meng,Xianwen Hu,Sheng Hu,Feng Jin,Yan Li,Bin Li,Shilin Liu
The development of sustainable and cost-effective thermal insulation materials is essential for improving energy efficiency and reducing dependence on petroleum-derived foams. Herein, a simple heating curing strategy was developed to fabricate bio-based closed-cell foams through hydroxypropyl methylcellulose (HPMC)-regulated Pickering emulsion templating. In this process, acrylated epoxidized soybean oil (AESO)-based emulsions were directly cured by heating, while the thermogelation and film-forming behavior of HPMC regulated the evolution of the porous structure. Increasing the HPMC concentration significantly enhanced the rheological stability of the emulsions, with the storage modulus increasing and the thermal gelation temperature decreasing from 66.1 °C to 40.3 °C. The foams exhibited low thermal conductivity of 0.042 − 0.058 W/m·K and exhibited pronounced thermal insulation in infrared thermography analysis. Meanwhile, the Young’s modulus increased from 2.64 MPa to 4.72 MPa, indicating improved mechanical properties. Micro-CT and SEM analyses revealed that the pore structure could be regulated by HPMC, with the average pore diameter increasing from 0.27 ± 0.13 mm to 1.26 ± 0.25 mm and the macropore volume fraction within the reconstructed region of interest decreasing from 84.4 % to 58.8 %. These findings provide a scalable and sustainable strategy for designing candidate bio-based thermal insulation foams, with potential relevance to energy-saving applications such as building-related insulation fillers, cold-chain logistics, and protective packaging.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Bio
·
2026
·
IF 11
Zhaoyou Chu,Shu Fang,Wanyue Fu,Jun Liang,Yayun Wu,Ling Xu,Hanqing Zhang,Jiyang Wang,Haisheng Qian,Min Shao
New Delhi metallo-β-lactamase (NDM)-producing drug-resistant bacteria often form stubborn biofilms and cause severe pneumonia, resulting in conventional antibiotic failure. In this study, we developed gelatin-genipin microspheres co-loaded with EDTA and meropenem (GEM) for targeted treatment of NDM pneumonia. EDTA exerted dual functions: it chelated Zn 2+ to inactivate NDM enzyme and restore meropenem activity (FIC = 0.046875), while also disrupting bacterial biofilms through chelation. GEM microspheres enable accelerated drug release in the artificial phlegm environment. In a mouse model of NDM pneumonia, GEM microspheres can enhance the recruitment of neutrophils and M1 cells at the early stage (12 h) through bacterial clearance, modulate the secretion of interferon-γ by CD8 + T cells and natural killer cells, and reshape the pulmonary immune microenvironment. Furthermore, GEM treatment reduced pathological pulmonary immune cell infiltration and excessive inflammation at late time points (days 3-7). Taken together, GEM microspheres integrate biofilm disruption, enzyme inhibition, synergistic bactericidal effects, and immunoregulation, representing a promising strategy against NDM drug-resistant bacterial pneumonia.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Peng Liang,Han Hu,Hanxu Zhu,Xiaokun Hong,Dong-Qing Wei,Jiayi Li,Jinggang Wang,Jin Zhu
Designing polyesters that combine long-term storage stability with controlled enzymatic deconstruction remains a formidable challenge in sustainable polymer development. Herein, we report a fumarate-based copolyester platform, poly(butylene terephthalate-co-fumarate) (PBTFu), that achieves this balance through stereoelectronic and conformational control. PBTFu exhibits exceptional mechanical robustness (>33.5 MPa strength and 760% elongation) and superior gas and water-vapor barrier properties, while retaining macroscopic integrity and substantial mechanical performance after 20 months of ambient storage. Crucially, PBTFu displays a sharp "on/off" degradability switch: it remains inert to hydrolysis and Candida antarctica lipase B at 37 °C but undergoes rapid depolymerization by Humicola insolens cutinase (HiC) at 55 °C. Combined experimental and computational investigations elucidate the molecular basis: the conjugated fumarate moiety lowers carbonyl electrophilicity to confer intrinsic hydrolytic resistance, while HiC’s open catalytic cleft and a temperature-driven conformational match enable efficient nucleophilic attack. This work establishes PBTFu as a promising platform that leverages stereoelectronic stabilization and conformational dynamics to achieve durable yet HiC-depolymerizable packaging materials, offering a viable strategy for balancing storage stability with controlled enzymatic deconstruction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2026
·
IF 5.8
Jiayi Chen,Wei Han,Yixuan Cai,Xudong Wang,Rugeng Liu,Meng Zhang,Mei Li,Weiqun Shi
Studied the electrochemical behavior of Ce(III) ions on Bi film electrodes and liquid Bi electrode. • Studied the effect of Ce (III) ions on the electrochemical behavior of UO 2 2+ at Bi film electrode and liquid Bi electrode. • Ce(III) ions and UO 2 2+ ions were separated via potentiostatic and galvanostatic electro-deposition on a liquid Bi electrode. • Found that better separation of Ce(III) ions and UO 2 2+ can be achieved at relatively low potentials. • The extraction efficiency and separation efficiency were calculated for electrolytic separation at lower potentials. To achieve the separation of uranium and fission products, a liquid Bi electrode was employed to study the electrochemical separation of the fission product Ce(III) ions and UO 2 2+ ions. The electrochemical reduction mechanism of Ce(III) ions was investigated at a Bi film electrode using three electrochemical testing methods: CV, SWV and CP, The results showed that a series of reduction peaks related to the formation of Ce-Bi intermetallic compounds appeared at potentials more positive than the reduction potential of Ce(III) ions. Meanwhile, the electro-reduction mechanism of Ce(III) ions at a liquid Bi electrode was also explored. A reduction peak associated with the formation of Bi-Ce solid solution was recorded. The impacts of Ce(III) ions on the electro-reduction mechanism of UO 2 2+ at a Bi film electrode were examined, and found that the electro-reduction of UO 2 2+ was two-step single-electron transfer process before and after the addition of Ce(III) ions. Furthermore, electrochemical separation of UO 2 2+ and Ce(III) ions was performed at a liquid Bi electrode at -0.7 V/-1.3 mA cm -2 . XRD results confirmed that the separation product included not only UO 2 , but also Ce 2 O 3 and Bi-Ce alloy. Nevertheless, constant potential electrolysis experiment was conducted at the potential of -0.3 V, and the product analyzed by XRD, SEM and EDS demonstrated that only spherical UO 2 with a regular morphology was obtained. The separation factor between UO 2 2+ and Ce(III) ions and extraction efficiency of UO 2 were calculated to be 34.4 and 97.76 %, respectively. Download: Download high-res image (184KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Shuyi Wu,Xu Huang,Mengyao Zheng,Wendi Liu,Renhui Qiu
Optimized soybean oil-based adhesive with good shear strength (7.85 MPa) and processability. • Addition of IPDI to the adhesive reduces free volume, increases interfacial binding energy, and enhances compactness. • Quantified cohesive parameters of adhesive interface enable FE simulation with only 4.40% average error. The development of renewable vegetable oil-based adhesives is critical for bamboo panels, but systematic quantitative studies on adhesive interface mechanics are lacking. This work investigates a soybean oil‑based adhesive (ABI) composed of epoxy soybean oil acrylate (AESO), 1,4‑bis(acryloyloxy)butane (BDDA), and isophorone diisocyanate (IPDI). We studied its formulation, molecular behavior at the bamboo interface, and equivalent mechanical parameters of the adhesive interface. Orthogonal experiments determined the optimal formulation, achieving an interfacial shear strength of 7.85 ± 0.42 MPa. The adhesive exhibits good processability: viscosity 205 ± 8 mPa·s, curing temperature 130 °C, crosslinking density 3.1 × 10² mol·m⁻³ , gel content 92.26%, and degradation temperature 292 °C. Molecular dynamics reveal that ABI, versus IPDI‑free AB, reduces fractional free volume (up to 1.44%), lowers interfacial diffusion by 42.45%, raises binding energy by 74.68%, and forms a broader interpenetration layer. Based on experimental data, the cohesive zone model parameters for the adhesive interface were determined: stiffness 46.75 MPa/mm, strength 7.85 MPa, and fracture energy density 0.74 N/mm. Using these parameters, numerical simulations of bamboo strand lap-jointed tensile properties yield an average error of 4.40% compared with experiments, validating the quantification method. This work offers a methodology for developing vegetable oil‑based bamboo adhesives and quantifying interface mechanics, facilitating their optimization and application. Download: Download high-res image (213KB) Download: Download full-size image A soybean oil‑based adhesive for bamboo is optimized via orthogonal design, its interfacial mechanics are revealed by molecular dynamics, and the cohesive parameters are quantified for finite element simulation with only 4.40% average error.
✓ 已验证
产品关联
DOI
高影响因子
DYES AND PIGMENTS
·
2026
·
IF 3.9
Baoyi Chang,Pengcheng Zhang,Lipiao Bao,Ziyu Qin,Xing Lu
Defect-engineered ZIF-67/BC composite achieves BET surface area of 747.0 m 2 /g. • Sensor sensitivity is 4.56-fold higher than conventional paper-based counterparts. • High selectivity for C 2 H 4 with stable response across 10-80% RH humidity range. • Colorimetric sensors enable full-cycle visual monitoring of fruit ripening stages. The development of highly sensitive ethylene (C 2 H 4 ) colorimetric sensors is often hindered by the low gas adsorption capacity of conventional substrates. Herein, we report a highly sensitive colorimetric sensor based on a defect-engineered ZIF-67/bacterial cellulose (Def-ZIF-67/BC) composite. Nitrogen adsorption analysis revealed that the integration of ZIF-67 and subsequent defect induction elevated the BET surface area from 83.9 m 2 /g (pristine BC) to a remarkable 747.0 m 2 /g, providing an 18.3-fold increase in adsorption capacity compared to paper-based substrates. The interconnected 3D nanofibrillar network of the Def-ZIF-67/BC composite provides a robust platform for efficient signal transduction. The sensor utilizes PdCl 2 -catalyzed Wacker oxidation of C 2 H 4 . Water-induced defect engineering enhanced the apparent ethylene-triggered colorimetric response, while PdCl 2 was essential for signal generation. Through systematic optimization of the catalyst-to-dye ratio, the TB and MR + BG sensing elements yielded maximum Euclidean distance values of 137 and 140, respectively, upon exposure to 50 ppm C 2 H 4 . This synergistic combination of physical adsorption enrichment and chemical signal amplification results in a 4.56-fold enhancement in sensitivity over traditional paper-based substrates, demonstrating the efficacy of defect engineering in trace gas detection. Performance evaluations confirmed that the sensor is highly selective toward C 2 H 4 and remains stable under fluctuating humidity levels due to the structural advantages of the BC substrate. Monitoring of climacteric fruits demonstrated the ability of the sensor to distinguish unripe, ripe, and overripe stages through clear colorimetric transitions. This work provides a robust and cost-effective solution for non-destructive quality monitoring in intelligent food supply chains. Download: Download high-res image (427KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Yuanyuan Wan,Chun Liu,Xinru Li,Yuanguang Zhou,Zhimin Liu,Zhigang Xu
Bisphenols (BPs), as representative endocrine-disrupting compounds, pose potential risks to human health and aquatic ecosystems. However, their trace-level occurrence and interference from complex environmental matrices remain major challenges for sensitive and selective analysis. In this study, a novel phenylboronic acid-functionalized molecularly imprinted covalent organic framework (MICOF@S-S-BA) was designed and synthesized for the selective enrichment, sensitive determination, and ecological risk assessment of BPs in aquatic environments. Bisphenol A (BPA) was employed as the template molecule to construct specific recognition cavities via molecular imprinting, endowing MICOF@S-S-BA with enhanced selectivity and rapid adsorption kinetics toward BPs. Benefiting from the well-defined imprinting sites and synergistic functional interactions, MICOF@S-S-BA exhibited a high adsorption capacity, which showed a positive correlation with the Log Kow values of BPs. Environmental analysis revealed that the spatial distribution of BPs varied along the river flow, and no pronounced high-risk hotspots were identified in the investigated area. Nevertheless, the estrogenic equivalent levels of residual BPs ranged from 1.1597 to 14.5537 ng E 2 L⁻¹ , indicating non-negligible potential ecological risks. The proposed MICOF@S-S-BA provides a reliable and efficient analytical platform for the rapid, sensitive, and accurate determination of multiple BPs in aquatic environments, offering essential exposure data to support subsequent ecological risk assessment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Bao Jiang,Yanhui Niu,Xiuxin Jin,Yuntao Huang,Qin Hu,Yaxin Luo,Jialing Hua
Rational Interface Engineering: We successfully synthesized a GO/MoS 2 /TiO 2 ternary nanocomposite with carefully engineered heterojunction interfaces. This structure not only prevents the restacking of MoS 2 and aggregation of TiO 2 but also facilitates efficient charge separation and accelerates electron transfer rates compared to single or binary counterparts. • Significant Synergistic Enhancement: Rather than simply mixing components, our design yields a substantial improvement in electrochemical performance. The sensor exhibits a 2-fold increase in current response and a significantly lower detection limit compared to the individual MoS 2 electrodes. This result strongly validates the effectiveness of our interface engineering strategy in overcoming the intrinsic limitations of single-component materials. • Self-Cleaning and Anti-Fouling Capability: A distinct advantage of our ternary system is its excellent anti-fouling property. The incorporation of TiO 2 endows the sensor with self-cleaning capabilities (attributed to its photocatalytic activity/surface properties), effectively mitigating electrode passivation caused by the adsorption of oxidation products. This ensures superior operational stability and reproducibility, addressing a common bottleneck in APAP detection. • Practical Robustness: We successfully applied the sensor to the determination of acetaminophen in real pharmaceutical tablets and water samples with satisfactory recovery rates, proving its potential for practical applications in complex matrices. Efficient detection of acetaminophen (APAP) is critical for public health and environmental safety, but traditional electrochemical sensors often suffer from severe electrode passivation and ambiguous interfacial sensing mechanisms.To address these challenges, To address these fundamental challenges, this study constructs a novel photo-assisted electrochemical platform based on a GO/MoS 2 /TiO 2 ternary heterojunction, systematically characterized via XRD, TEM, FTIR, and XPS. Explicitly shifting the focus from conventional metric-chasing (e.g., pursuing extreme detection limits) to rational material design, this work thoroughly elucidates the structure–activity relationship and underlying synergistic mechanisms through comprehensive kinetic investigations (e.g., CV, EIS, and DPV). Experimental results demonstrate that the strategically designed cascaded band structure significantly boosts electrocatalytic activity and interfacial charge transfer. Furthermore, by leveraging the distinct structural advantages of the distinct structural advantages of GO/MoS 2 alongside the photo-assisted properties of TiO 2 , the sensor achieves a dual-mode “anti-fouling and self-cleaning” capability that effectively resolves surface fouling caused by oxidation products. Consequently, the sensor exhibits robust performance with a detection limit of 0.07 µM (S/N = 3) and three wide linear response ranges (7.865∼12.155 µM, 12.155∼71.5 µM and 71.5∼715 µM). Ultimately, this systematic study provides not only a robust platform for real-world APAP monitoring but also a theoretical blueprint for designing next-generation, passivation-resistant sensing interfaces. A photo-assisted GO/MoS 2 /TiO 2 ternary heterojunction sensor was constructed for ultrasensitive electrochemical detection of acetaminophen with enhanced charge transfer and excellent anti-fouling performance.(This graphical abstract was generated using AI tools) Download: Download high-res image (252KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子