POWDER TECHNOLOGY
·
2026
·
IF 5.5
Jiaping Chen,Shuai Ning,Dianwen Liu,Tingwei Fu,Ruizeng Liu
SPS/GG system enables selective flotation separation of chalcopyrite and galena. • SPS-induced selective oxidation enhances GG adsorption on galena surfaces. • GG selectively formed a stable hydrophilic film on the oxidized galena surface. • GG selectively depresses galena by hydrophilization and steric shielding effects. • The SPS/GG system produced a copper concentrate with 29.31% Cu grade and 94.24% Cu recovery. In the flotation separation of copper‑lead sulfide ores, traditional depressants have problems such as poor selectivity and environmental unfriendliness. In this study, an innovative strategy was proposed, in which sodium persulfate (SPS) was first used for pre-oxidation, followed by the use of gellan gum (GG) as a novel environmentally friendly depressant for galena. The flotation results showed that, in the SPS/GG system, a high-quality copper concentrate with a Cu grade of 29.31% and a Pb recovery of 9.36% was obtained, achieving efficient separation of copper and lead. Contact angle, zeta potential, adsorption capacity, XPS, and AFM analyses indicate that the selective depression of galena is driven by a synergistic mechanism involving SPS-induced differential oxidation followed by the directed adsorption of GG. SPS preferentially oxidizes the galena surface, forming an oxide layer dominated by PbSO 4 , while exerting little effect on the chalcopyrite surface. This targeted surface modification creates preferential binding sites that promote the subsequent adsorption of GG on galena. The resulting hydrophilic GG layer markedly enhances galena wettability and acts as a steric barrier, thereby weakening the action of KEX. DFT calculations further showed that GG could form Pb O bonds with Pb sites on the galena surface and exhibited stronger adsorption ability on the galena-PbSO 4 surface. In contrast, chalcopyrite undergoes negligible oxidation and exhibits weak affinity for GG, allowing it to retain its hydrophobicity and floatability. This study provides theoretical support for the green and efficient flotation separation of copper‑lead sulfide ores. Download: Download high-res image (137KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2026
·
IF 5.9
Zhihua Liu,Yuting Ge,Yi Wei,Zhengjian Zhang,Yuehao Xing,Lin Ye,Zeng-guo Feng,Jinyu Wu,Yonghao Xiao
Novel ZSiPCU was synthesized, showing resistance to oxidative degradation. • Sulfobetaine hydration layer prevented thrombosis and promoted endothelialization. • Electrospun grafts showed high compliance, 3-month patency, and rapid remodeling. A novel sulfobetaine-modified polysiloxane-polycarbonate polyurethane (ZSiPCU) was synthesized. In vitro characterizations revealed that polysiloxane surface enrichment endowed the material with excellent biostability. Importantly, sulfobetaine zwitterions formed a robust hydration layer, effectively suppressing protein adsorption and platelet adhesion to ensure outstanding hemocompatibility. Furthermore, the material supported the adhesion and proliferation of vascular endothelial cells, confirming its cytocompatibility, while its elastomeric matrix provided rapid mechanical self-sealing capabilities. Electrospun ZSiPCU grafts were evaluated in a 3-month rat abdominal aorta model, maintaining high patency rates and facilitating in situ luminal endothelialization and smooth muscle cell remodeling. Additionally, superior puncture resistance of the grafts was demonstrated by puncture tests, with complete hemostasis achieved within 2 mins through mechanical self-sealing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
·
2026
·
IF 4.4
Zhiyuan Chen,Bingbing Shao,Chao Liang,Yiwen Zhang,Yunpu Zhai,Yonggang Liu
Bi-HOF/g-C 3 N 4 direct Z-scheme heterojunction was constructed. • Bi N/Bi O bonds enhanced interfacial charge transfer. • BHG-3 achieved 97.26% MB removal under visible light. • ·O 2 − and h + were identified as dominant active species. • BHG-3 showed good stability and broad pollutant applicability. To integrate the visible-light-harvesting capability of g-C 3 N 4 with the interfacial electron-transfer function of hydrogen-bonded organic frameworks (HOFs), a Bi-HOF/g-C 3 N 4 (BHG) direct Z -scheme heterojunction was constructed via a facile hydrothermal assembly strategy. Structural and surface chemical characterizations confirmed the successful formation of the heterojunction, where strong interfacial coupling was established through Bi–N/Bi–O coordination bonds and hydrogen-bonding interactions. Photoelectrochemical and spectroscopic analyses revealed that the BHG heterojunction markedly promoted charge separation and migration, as evidenced by an enhanced photocurrent response, reduced interfacial charge-transfer resistance, and suppressed recombination of photogenerated carriers. The optimized BHG-3 composite exhibited excellent visible-light photocatalytic activity, achieving 97.26% removal of methylene blue (MB) within 40 min, with an apparent reaction rate constant 3.39 times higher than that of pristine g-C 3 N 4 . Moreover, BHG-3 showed good cycling stability, favorable tolerance to selected coexisting inorganic anions and degradation capability toward several model organic contaminants. Radical trapping experiments and mechanistic analyses confirmed a direct Z -scheme charge-transfer pathway, in which electrons enriched on g-C 3 N 4 and holes retained on Bi-HOF synergistically participated in pollutant degradation. The possible photodegradation pathway of MB over BHG-3 was further proposed based on LC-MS analysis. This work provides insight into interfacial charge regulation in HOF-based photocatalysts and offers a feasible strategy for developing efficient visible-light-driven systems for organic pollutant degradation.
✓ 已验证
产品关联
DOI
高影响因子
Extreme Mechanics Letters
·
2026
·
IF 4.5
Yuan Wang,Yuechen Jiang,Yecheng Wang
Peel and lap shear are commonly used tests for soft materials. Our previous comparison of peel and lap shear for measuring bulk toughness leads to a fundamental question: do peel and lap shear measure identical adhesion toughness? Here we compare peel and lap shear for measuring adhesion toughness and use the adhesion between polyacrylamide hydrogel and polyacrylic acid hydrogel as a model system. To prepare samples, we introduce a precut crack to the adhesion interface of two adhered hydrogels and sandwich the adhered hydrogels between two stiff layers. In both types of tests, we pull one stiff layer at a constant velocity and record the force-displacement curve. In peel, as the displacement increases, the force increases to a peak and subsequently drops to a plateau, the crack propagates steadily in the sample, and the adhesion toughness is determined by the plateau force. In lap shear, as the displacement increases, the force increases to a peak and subsequently drops to zero, the crack propagates unstably in the sample, and the adhesion toughness is determined by the peak force. Our experiments show that the average values of adhesion toughness measured in peel and lap shear are nearly identical. We also prepare hydrogels of different values of pH and measure the adhesion toughness using peel and lap shear. When pH is high, the adhesion is brittle, the crack propagates along the adhesion interface, and adhesive fracture takes place. When pH is low, the adhesion is tough, the crack kinks into the hydrogels, and cohesive fracture takes place. In either case, the average values of adhesion toughness measured in peel and lap shear are comparable. We further measure the adhesion toughness of hydrogels of different crosslink densities, and peel and lap shear give nearly identical adhesion toughness for all the crosslink densities. These results guide the use of peel and lap shear for characterization of adhesion of soft materials.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Ming Yang,Xueying Wang,Feifei You,Feng Chen,Jian Qiao,Xuewei Luo,Yuhua Li,Yuge Ouyang
Thermal barrier coatings (TBCs) play an essential role in protecting hot-section components of gas turbines and aero-engines, enabling higher operating temperatures and improving propulsion efficiency. However, the current state-of-the-art material, 8 wt% yttria-stabilized zirconia (8YSZ), suffers from inherent limitations at temperatures exceeding 1200 °C, including phase transformation, sintering-induced increase in thermal conductivity, and susceptibility to CMAS attack. In this study, a series of novel rare-earth co-doped zirconia powders and corresponding coatings with the nominal composition RE 0.02 Gd 0.025 Yb 0.025 Y 0.05 Zr 0.88 O 1.94 (RE = Er, Eu, Sm, Nd) were successfully synthesized via solid-state reaction and deposited as coatings by air plasma spraying (APS). The phase structure and thermophysical properties were systematically characterized from room temperature to 1600 °C using X-ray diffraction (XRD) and laser flash analysis. All co-doped coatings exhibit a mixed monoclinic, tetragonal, and cubic phase structure. Notably, the ErZr coating shows similarly low thermal conductivity, with the lowest measured value of 2.24 W/(m·K) at 1600 °C. The calculated defect scattering coefficients (Γ ≈ 1.624-1.626) for the co-doped compositions are significantly higher than the coefficient of 8YSZ (Γ ≈ 1.054), confirming that multi-element doping introduces stronger phonon scattering through enhanced lattice distortion and oxygen vacancy effects. These findings establish rare-earth co-doping as an effective strategy for achieving lower thermal conductivity in TBCs and provide quantitative guidance for the design of next-generation thermal barrier materials with superior high-temperature insulation performance.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Qianqian Wang,Hongxi Li,Xuejiao Sun,Jiahao Huang,Dongmei Li,Zhongzhen Tian
PPPQ exhibited a high theoretical specific capacity and strong electron-withdrawing ability. • PPPQ showed narrow band gap, low solubility and excellent stability in 3 M ZnSO 4 . • PPPQ electrode exhibited electrolyte wettability, which enabled the improvement of interface regulation. Aqueous zinc-ion batteries (AZIBs) have attracted considerable attention because of their high safety, low cost, and environmental compatibility. However, the practical application of organic cathode materials is still limited by high solubility, low electronic conductivity, and restricted theoretical capacity. Herein, a heteroatom-substitution strategy was proposed to regulate the molecular structure of phenazine-based cathodes by replacing benzene rings with pyridine groups and tuning the nitrogen-doping positions. Two phenazine-based pyridine isomers, pyrido[2,3- b ]pyrido[3′,2′:5,6]pyrazino[2,3- f ]pyrido[3′,2′:5,6]pyrazino[2,3- h ]quinoxaline (PPPQ) and pyrido[3,4- b ]pyrido[4′,3′:5,6]pyrazino[2,3- f ]pyrido[4′,3′:5,6]pyrazino[2,3- h ]quinoxaline (PQNI), were designed and synthesized. Theoretical calculations reveal that the introduction of pyridinic N atoms modulates the electron-cloud distribution, narrows the HOMO–LUMO gap, enhances electron delocalization, and creates a negatively charged molecular environment, thereby improving redox activity and interfacial stability. Compared with PQNI, the ortho-linked PPPQ exhibits stronger π-conjugation, more ordered π–π stacking, lower dissolution, and faster charge-transfer kinetics. As a result, the PPPQ cathode delivers a high specific capacity of 354 mAh g −1 at 0.1 A g −1 and maintains 95% capacity retention after 2000 cycles at 5 A g −1 . In situ/ex situ characterizations and density functional theory calculations further demonstrate that the C N sites serve as redox-active centers and that PPPQ undergoes a proton-dominated three-step 6e − charge-storage process. This work clarifies the structure–property relationship of heteroatom-substituted phenazine-based organic cathodes and provides a molecular design strategy for high-performance AZIBs. Download: Download high-res image (131KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
STAR Protocols
·
2026
·Vol. 7
·期 3
·104713
·
IF 1.4
Jia Liu,Xugen Chen,Lebing Wang,Feng Zhou,Jiantao Zhang
Summary Here, we present a protocol for generating concentration-modulated water-in-oil-in-water (W/O/W) double-emulsion droplets (DEDs) to program DNA crystal morphology. We describe assembly of a dual-inner-phase glass capillary microfluidic device, flow-rate-controlled co-encapsulation, osmotic shrinkage, and image-based morphology analysis. This protocol validates encapsulation predictability using methylene blue and enables aspect-ratio control of 2T crystals and directional morphology regulation in 13-mer systems. For complete information on the generation and use of this protocol, please refer to Chen et al. 1
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Linlin Wang,Yafei Guo,Wenhui Zhao,Pengfei Wang,Zonglin Liu,Ting-Feng Yi
A unique 3D hierarchical network consisting of 0D carbon dodecahedra and 1D carbon nanotubes is successfully constructed via in-situ growth. • Phosphorus doping serves as a versatile modulator to induce 1D morphology formation and optimize the electronic density of iron active centers. • The optimized N, P co-doped Fe-N-C catalyst exhibits an outstanding half-wave potential of 0.884 V in alkaline media. • The assembled zinc-air battery achieves a remarkable operational lifespan exceeding 1300 h with superior structural integrity. Developing highly efficient and durable non-precious metal electrocatalysts for oxygen reduction reaction (ORR) remains a critical challenge for the practical application of zinc-air batteries (ZABs). Herein, we successfully synthesized a robust N, P-codoped Fe-N-C catalyst featuring a unique 0D/1D intertwined architecture through a phosphorus-induced heteroatom-modulation strategy. By utilizing FePc-encapsulated ZIF-8 as a precursor, the in-situ growth of 1D carbon nanotubes from 0D carbon dodecahedrons was achieved, constructing a 3D hierarchical conductive network. Experimental and mechanistic analyses reveal that P-doping serves as the key morphology director. It not only induces the formation of structural-stable 1D nanotubes to enhance electron transfer but also modulates the electronic density of Fe centers to elevate electro-oxidation resistance. Consequently, the optimized catalyst exhibits a superior half-wave potential (E 1/2 ) of 0.884 V (vs. RHE) in alkaline media. Remarkably, the as-assembled ZAB achieves an exceptional stability of over 1300 h, demonstrating the superior structural integrity and durability of the 0D/1D network. This research offers a strategic design for engineering high-performance and stable Fe-N-C catalysts through synergistic 0D/1D architecture construction. Phosphorus-induced modulation facilitates the in-situ growth of 1D nanotubes from 0D dodecahedrons, constructing an integrated 0D/1D hierarchical Fe-N-C structure. This structural engineering optimizes the electronic environment of Fe sites for enhanced ORR kinetics (E 1/2 = 0.884 V) and endows practical zinc-air batteries with an outstanding stability exceeding 1300 h. Download: Download high-res image (283KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Guodian Zhu,Ying Liu,Zhanhui Chen,Qingbing Guo,Jiangzhen Qiu,Buning Zhang,Jinhui Huang,Guoqiang Yin
Replacing α -hydroxyl group with an α , β -unsaturated group markedly enhanced the decomposition reactivity of dimer. • α , β -Unsaturated group promoted C α ─C β bond cleavage, while α -hydroxyl group led to β -O-4 bond cleavage. • α , β -Unsaturated group accelerated reaction rate ∼14-fold at 120 °C. • Dehydration of α -hydroxyl group into α , β -unsaturated group facilitated lignin depolymerization. Lignin is a promising feedstock for the production of monomeric aromatics, which can be further upgraded into valuable chemicals or fuel hydrocarbons. In this work, the effect of the α , β -unsaturated group on the conversion of lignin and its β -O-4 model dimers into monomeric aromatics was investigated. The results showed that replacing the native α -hydroxyl group with an α , β -unsaturated group markedly enhanced the decomposition reactivity of the dimer. Specifically, the α , β -unsaturated group promoted C α ─C β bond cleavage, whereas the native α -hydroxyl group led to β -O-4 bond cleavage. This significant enhancement in reactivity was consistent across varied reaction conditions and enabled near-quantitative yields of monomeric aromatics from the dimer containing the α , β -unsaturated group. Kinetic analyses indicated apparent first-order kinetic behavior for both dimers, showing that the α , β -unsaturated group accelerated the reaction rate by a factor of approximately 14 at 120 °C. Moreover, an α , β -unsaturated group generated in situ via dehydration of the α -hydroxyl group during pretreatment effectively facilitated lignin depolymerization. This work outlines a promising approach for developing efficient lignin depolymerization technologies targeting monomeric aromatics.
✓ 已验证
产品关联
DOI
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2026
·
IF 8.8
Wenting Jiang,Manman Wu,Jia Du,Rixuan Wang,Xixi Cai,Shaoyun Wang
AF-NADES form homogeneous amorphous liquids with interconnected H-bond networks. • AF-NADES suppress ice recrystallization and delay surface frost formation. • AF-NADES exhibit higher glass transition temperature and flow resistance. • AF-NADES regulate water mobility via multivalent H-bonding. • AF-NADES effectively preserves surimi quality during repeated freeze–thaw cycles. Controlling ice recrystallization and water dynamics is critical for frozen food quality, while conventional cryoprotectants primarily rely on colligative effects and provide limited molecular-level regulation of ice formation. Amino acid-based antifreeze natural deep eutectic solvents (AF-NADES) composed of glycerol, L-proline, and L-arginine were developed to modulate water and ice behavior through multivalent hydrogen-bond interactions. Among the formulations, the ternary glycerol–proline–arginine system (GPR) exhibited the strongest antifreeze performance, maintaining ice crystal areas below 1000 μm 2 and effectively suppressing ice nucleation, recrystallization, and frost growth. GPR also showed the highest glass transition temperature (−59.3 °C) and flow activation energy (50.59 kJ·mol −1 ), indicating the formation of a highly interconnected and kinetically constrained network. Spectroscopic analyses and density functional theory suggested the presence of a heterogeneous hydrogen-bond network that may influence water organization and bulk water dynamics while preserving localized dynamic interactions. Application in surimi further confirmed its cryoprotective efficacy. Supplementation with 8% GPR reduced thawing loss to 1.02% and maintained water-holding capacity at 91.51% after 14 freeze–thaw cycles. AF-NADES may regulate ice formation through synergistic effects associated with vitrification-induced kinetic confinement and potential interfacial contributions to ice-growth inhibition. These findings highlight AF-NADES as a promising food-grade cryoprotectant for frozen food preservation. Download: Download high-res image (250KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Xiudong Zhu,Wei Guo,Zhang Wei,Zhe Sheng,Xiongchao Lin,Deping Xu,Yonggang Wang
M 3+ controls phase evolution: Al/Ga form Cu-Co alloy; In 3+ leads to CuIn, CoIn 2 , In 2 O 3 separation. • Surface hydroxyls and bridged CO provide dual CHₓ sources for C 2+ OH formation. • Medium-strength basic sites and Cu + fraction, not total basicity, govern C 2+ OH selectivity. • Smaller M 3+ radius (Al 3+ ) strengthens metal-support interaction, enhancing dispersion and performance. The modulation of trivalent cations in layered double hydroxide (LDH)-derived catalysts provides an effective strategy for tuning the multifunctional active sites for higher alcohol synthesis. In this study, a series of layered CuCoM catalysts (M = Al, Ga, In) was synthesized via alkaline co-precipitation and evaluated for higher alcohols synthesis via CO hydrogenation. The results demonstrate that the introduction of M 3 + is essential for constructing the LDH precursor structure and significantly influences the phase evolution, morphology, textural properties, reducibility, surface basicity, and chemical states of the catalysts. Among the catalysts tested, CuCoAl exhibited the best overall performance, achieving a CO conversion of 35.60%, an ethanol selectivity of 39.97%, and a C 2 + alcohols selectivity of 73.47%. Structural characterization revealed that CuCoAl had the highest specific surface area and the most uniform dispersion of Cu and Co species, which favored the exposure of accessible active sites. CO 2 -TPD, XPS, and in situ DRIFTS results further indicated that CuCoAl contained abundant surface hydroxyl groups and a higher fraction of Cu + , which promoted the formation of formate species, facilitated non-dissociative CO insertion, and enhanced CH x generation through both formate hydrogenation and bridged CO dissociation on Co sites. The superior catalytic performance of CuCoAl is thus attributed to the synergistic effect of highly dispersed Cu-Co active sites, abundant surface hydroxyl groups, and optimized Cu + /Co interfacial functionalities. This study provides mechanistic insights into trivalent-cation regulation in LDH-derived CuCo catalysts and offers a rational strategy for the design of efficient catalysts for higher alcohol synthesis from syngas. Download: Download high-res image (174KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2026
·
IF 5.8
Xiaotao Zhu,Ying Qin,Yizeng Gan,Xie Wang,Yeqiao Meng,Ke Wang
A PTFE-based composite with surface-modified Zr₂O(PO₄)₂ (ZOP) filler was developed for high-frequency applications. • FAS-17 surface modification improves tZOP-PTFE compatibility and filler dispersion while reducing visible defects. • PTFE@tZOP-40 exhibits an ultralow dielectric loss (D f = 5.5 ×10 −4 at 10 GHz) and a reduced CTE of 51.6 × 10 −6 K −1 . With the increasing demand for advanced dielectric materials in high-frequency microwave and millimeter-wave systems, polytetrafluoroethylene (PTFE) has attracted considerable attention due to its low dielectric constant, low dielectric loss, and excellent electrical insulation. However, its high coefficient of thermal expansion (CTE) may cause dimensional instability and reliability issues in high-frequency substrate applications. In this study, zirconium oxophosphate (Zr₂O(PO₄)₂, ZOP), an ultralow-CTE ceramic filler, was incorporated into the PTFE matrix to develop composites with reduced thermal expansion and favorable dielectric performance. To improve the compatibility between hydrophilic ZOP and hydrophobic PTFE, ZOP particles were surface-modified using a fluorinated silane coupling agent to obtain tZOP. The modified tZOP showed improved dispersion in the PTFE matrix and reduced visible defects, contributing to a denser composite microstructure and enhanced thermal dimensional stability. At a filler loading of 40 wt%, the PTFE@tZOP composite achieved a CTE of 51.6 × 10 −6 K −1 , a dielectric constant of 2.83, and a dielectric loss of 5.5 × 10 −4 at 10 GHz. This work demonstrates an effective surface-modification strategy for developing PTFE-based composites with low thermal expansion and favorable dielectric properties for next-generation high-frequency substrates. Download: Download high-res image (185KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子