Nano Energy
·
2020
·
IF 16.602
Jingyi Wu,Xiongwei Li,Zhixiang Rao,Xiaoning Xu,Zexiao Cheng,Yaqi Liao,Lixia Yuan,Xiaolin Xie,Zhen Li,Yunhui Huang
Lithium metal is a promising anode material for rechargeable batteries with high energy density . However, the uncontrollable dendrite growth severely hinders the commercialization of Li metal anode . Inspired by the “leveling” mechanism in traditional electroplating, we demonstrate that boron nitride nanosheets (BNNSs) as a liquid electrolyte additive can level out Li protrusions and enable dendrite-free Li metal anodes. 2D BNNSs can automatically and continuously flatten Li deposits and accommodate volume changes during Li plating/stripping. B atoms in BNNS as Lewis acid sites interact with Lewis basic anions in electrolyte, reducing Li + concentration gradient and unifying Li deposition. The collect effects of BNNS additive give rise to dendrite-free Li anodes over 400 h and deep plating/stripping up to 35 mAh cm −2 , as well as potential application in sub-zero temperature batteries (−20 °C). Li–S full cells using BNNS electrolyte also exhibit improved performance. This simple and effective strategy is applicable to develop dendrite-free Li or other metal anodes in high-performance energy storage devices.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2023
·Vol. 11
·期 6
·2979-2984
·
IF 11.9
Wu Wei,Zhihong Wang,Liyun Yao,Hao Jiang,Chunzhong Li
Development of Ni-rich and Co-poor cathodes (Ni ≥ 80%, Co ≤ 5%) is indispensable for the next-generation lithium-ion batteries (LIBs) owing to the serious impact of scarce resources and fragile supply chain of cobalt, but they suffer from a more prominent lattice oxygen emission with serious Li/Ni intermixing as well as worsening crystal and interface structure. Herein, CeO2−x-coated LiNi0.9Co0.045Mn0.045Al0.01O2 has been demonstrated to stabilize lattice oxygen by the well-dispersed Al–O bonds and the reversible oxygen-storage protective layer. The in situ DEMS and ex situ spectral analyses verified the negligible O2 and CO2 emission, even charging to 4.4 V, and the formation of stable cathode–electrolyte interfacial membrane. The as-obtained cathode exhibited a reversible specific capacity as high as 223 mA h g−1 at 0.1C and 140 mA h g−1 even at 10C with 96.7% capacity retention at 1C after 100 cycles in a coin-type half-cell. About 90.1% capacity retention could still be obtained at 1C in a pouch-type full-cell after 300 cycles. This work provides a viable cathode for durable LIBs by stabilizing the lattice oxygen of Ni-rich and Co-poor cathodes.
研究领域:
电化学
·
材料科学
·
能源存储
·
锂离子电池
·
固态化学
·
表面科学
·
电极材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Xiangyang Zhuang,Yao Zhang,Lingxiao He,Yunfeng Zhu,Quan Shi,Quan Wang,Guanzhou Song,Xiaoxiao Yan,Liquan Li
Overheating caused by exothermic effect of magnesiothermic reduction reaction is usually considered as a drawback in preparing porous silicon anode materials for Li-ion batteries. However, in the present work, thermal effect is available in facile preparation of macroporous Si by tabletting pretreatment . The released heat in magnesiothermic reaction is easily accumulated on the tablet with high density, leading to the collapse of the mesoporous structure of the precursor and formation of uniform macroporous silicon . Such macroporous silicon shows a higher initial Coulomb efficiency (86.5%) and enhanced cycling stability in comparison with mesoporous silicon prepared without tabletting treatment. XRD analysis indicates that the reaction temperature decreases to 430–435 °C (based on set temperature), much lower than that of the reaction without pretreatment. Since the structure of product has less dependency on precursor, a wide variety of precursors can be used to synthesize macroporous silicon, e.g. low cost biosilica. Being ascribed to low reaction temperature, heating rate insensitivity, less dependency on precursor, enhanced cycling performance and high initial Coulomb efficiency of the Si products, the modified magnesiothermic reduction method is promising for application in fabricating Si anode.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机合成
·
功能材料
·
电池技术
✓ 已验证
DOI
高影响因子
IONICS
·
2019
·Vol. 26
·期 2
·649-660
·
IF 2.289
Yan Honglin,Ru Qiang,Gao Ping,Cheng Shikun,Ling Francis Chi-Chung
In the past few years, silane coupling agents are often used to modify the surface of silicon materials; however, researches in preparation of SiO X -based materials pyrolyzed from silane coupling agents are seldom reported. Hence, in order to prepare amorphous SiO X @C anodes for Li-ion storage, we adopted three kinds of silane coupling agents as organic silicon sources. The results show that silane coupling agents with vinyl group is the optimum organic silicon source. Owing to the strong chemical bonds of Si–O–C, amorphous SiO X particles are uniformly embedded in carbon matrix, forming monodisperse microbeads architecture with good buffer abilities. Therefore, the V-SiO X @C anodes derived from silane coupling agents with vinyl groups show good electrochemical performance, retaining a reversible discharge capacity of 940 mAh g −1 at a current density of 100 mA g −1 after 200 cycles, and it still depicts a good long-term cycling durability, maintaining 739 mAh g −1 at a current density of 400 mA g −1 after 400 cycles.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
锂离子电池
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Bin Qin,Yifei Cai,Xiaoqing Si,Chun Li,Jian Cao,Weidong Fei,Junlei Qi
The practical application of lithium-sulfur (Li-S) batteries is impeded by the shuttle effect of intermediate polysulfides and the inherent sluggish kinetics. Herein, Mo 2 C nanocatalysts anchoring on holey graphene scaffold (Mo 2 C@HGr) is explored as a lightweight and ultrathin modified separator to conquer the above issues. The artificially customized holes on holey graphene sheets facilitate ionic transfer and electrolyte penetration, and further enhance the sulfur utilization under lean electrolyte conditions. The experimental results together with theoretic calculation demonstrate the favourable chemical adsorption ability of Mo 2 C sites that blocking the diffusion of LiPSs. Abundant triple-phase interfaces among Mo 2 C nanomediators, holey graphene and electrolyte boost the conversion kinetics of the intercepted LiPSs. As a result, the cell with Mo 2 C@HGr modified separator shows superior rate capability (836 mAh g −1 ) even at 5 C current with a negligible Mo 2 C@HGr loading of 0.08 mg cm −2 . Furthermore, ultrahigh areal capacity of 5.9 mAh cm −2 is still attained with high sulfur loading of 6 mg cm −2 under lean electrolyte operation (E/S = 5.6 µL mg −1 ). This design concept can be extended to other graphene based multifunctional nanocomposite toward the development of more practical Li-S batteries.
研究领域:
电化学
·
能源材料
·
纳米催化
·
电池技术
·
功能复合材料
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2016
·
IF 2.38
Shanshan Mo,Penghao Lu,Fei Ding,Zhibin Xu,Jiaquan Liu,Xingjiang Liu,Qiang Xu
Sulfide glasses with a high lithium-ion conductivity are promising solid electrolyte for all-solid-state lithium-ion batteries. In this study, 95(0.7Li 2 S–0.3P 2 S 5 )–5Li 3 PO 4 glass electrolyte is prepared by mixing 70Li 2 S-30P 2 S 5 (mol%) glass and Li 3 PO 4 crystal using mechanical milling technique. The effects on the structures and electrochemical properties of the obtained ternary sulfide glass were examined. The ternary sulfide glass shows a good electrochemical stability, which may exhibit a wide electrochemical window up to 10 V (vs. Li/Li + ). Furthermore, the 95(0.7Li 2 S-0.3P 2 S 5 )-5Li 3 PO 4 glass electrolyte displays an electrical conductivity of 2.513 × 10 − 3 S cm − 1 at 100 °C. The all-solid-state lithium-ion cell assembled with 95(0.7Li 2 S-0.3P 2 S 5 )-5Li 3 PO 4 glass electrolyte shows a favourable cyclability, which can reveal a discharge capacity of 144 mAh g − 1 at 0.05 °C and a discharge capacity of 63.9 mAh g − 1 at 0.1C after the 50th cycle at 100 °C, respectively.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
锂电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2014
·
IF 5.211
Q.Q. Xiong,J.P. Tu,X. Ge,X.L. Wang,C.D. Gu
Fe 2 O 3 nanospindles assembled with nanoparticles as primary building blocks are directly synthesized by a versatile ionothermal strategy in the choline chloride/urea mixture-based deep eutectic solvent system. The proposed ionothermal protocol is attractive and environmental friendly because choline chloride and urea are both naturally biocompatible compounds. As an anode material for lithium-ion batteries, the resultant Fe 2 O 3 nanospindles show high capacity and good cycle stability (921.7 mAh g −1 at a current density of 200 mA g −1 up to 50 cycles), as well as the excellent rate capability. The good electrochemical performance can be attributed to the nanospindle structure with high sufficient interfacial contact area between the active material and electrolyte, the short diffusion distance of Li ions . The environmentally benign strategy proposed in this study is expected to offer an attractive technique for the ionothermal synthesis of electrochemical energy storage materials .
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机合成
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
S.Z. Zhang,X.L. Wang,X.H. Xia,Z.J. Yao,Y.J. Xu,D.H. Wang,D. Xie,J.B. Wu,C.D. Gu,J.P. Tu
Interfacial issues have been the main obstacle to the development of solid-state batteries . In this work, we design a solid hybrid polymer electrolyte based on poly-(ethylene glycol) diacrylate and succinonitrile (PSSE) with a liquid state precursor. An intimate interface between PSSE and Li 4 Ti 5 O 12 @vertical graphene (LTO@VG) electrode with three-dimensional array structure is cleverly constructed by infiltrating fluid precursor of PSSE into vertical pores of LTO@VG followed by polymerization and solidification of PSSE. The quasi-solid-state LTO@VG//PSSE//Li and LiFePO 4 //PSSE//LTO@VG full cells exhibit superior electrochemical performance since the active materials are closely contacted by the conductive skeleton and ion-conductive electrolyte. The LTO@VG//PSSE//Li cells maintain 85.7% capacity retention after 400 cycles at 2 C and the LFP//PSSE//LTO@VG full cells still reach 99.0% capacity retention after 200 cycles at 0.5 C. This novel strategy for interface engineering paves the way for achieving high-performance solid-state batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米材料
·
界面科学
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Xin-yu Hu,Mao-xiang Jing,Hua Yang,Quan-yao Liu,Fei Chen,Wei-yong Yuan,Le Kang,Dong-hong Li,Xiang-qian Shen
Poor room-temperature ionic conductivity and lithium dendrite formation are the main issues of solid electrolytes. In this work, rod-shaped alumina incorporation and graphite coating were simultaneously applied to poly (propylene carbonate) (PPC)-based polymer solid electrolytes (Wang et al., 2018). The obtained alumina modified solid electrolyte membrane (Al-SE) achieves a high ionic conductivity of 3.48 × 10 −4 S/cm at room temperature with a wide electrochemical window of 4.6 V. The assembled NCM622/Al-SE/Li solid-state battery exhibits initial discharge capacities of 198.2 mAh/g and 177.5 mAh/g at the current density of 0.1 C and 0.5 C, with the remaining capacities of 165.8 mAh/g and 161.3 mAh/g after 100 cycles respectively. The rod-shaped structure of Al 2 O 3 provides fast transport channels for lithium ions and its Lewis acidity promotes the dissociation of lithium salts and release of free lithium ions. The lithiophilic Al 2 O 3 and Graphite form intimate contact with metallic Li and create fast Li + conductive layers of Li-Al-O layer and LiC 6 layer, thus facilitating the uniform deposition of Li and inhibiting Li dendrite formation during long-term cycling. This kind of composite Al-SE is expected to provide a promising alternative for practical application in solid electrolytes.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
纳米复合材料
·
锂金属电池
✓ 已验证
DOI
高影响因子
IONICS
·
2016
·Vol. 23
·期 10
·2603-2611
·
IF 2.119
Chen Shaojie,Zhao Yanran,Yang Jing,Yao Lili,Xu Xiaoxiong
Three types of inorganic electrolytes [Li 10 GeP 2 S 12 (LGPS), 75Li 2 S·24P 2 S 5 ·1P 2 O 5 (LPOS), Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP)] with different particle sizes and electrochemical properties are selected as active fillers incorporated into poly(ethylene oxide) (PEO) matrix to fabricate hybrid solid electrolytes. The optimum composition of each filler is found in consideration of ionic conductivity. Their electrochemical characteristics are investigated. The optimal conductivities are 1.60 × 10 −5 , 1.18 × 10 −5 , and 2.12 × 10 −5 S cm −1 at room temperature for PEO-1%LGPS, PEO-1%LPOS, and PEO-20%LAGP, respectively. The electrochemical stability windows of these hybrid solid electrolytes are all above 5 V (vs. Li + /Li). The results show that these fillers have positive effects on the ionic conductivity, lithium ion transference number, and electrochemical stability. The relationship between the type of filler and electrochemical properties has been investigated. All-solid-state cells LiFePO 4 /Li are fabricated and present fascinating electrochemical performance with high capacity retention and good cycling stability. This work provides promising electrolytes prepared by a simple method.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
功能材料
·
锂电池技术
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Yinwei Fu,Xiaofeng Lei,Huiming Yin,Xizheng Liu
Flexible lithium–air batteries (LABs) with a redox mediator (RM) in the electrolyte demonstrate enhanced round-trip efficiency. However, their cycle performance is unsatisfactory due to severe corrosion of the Li metal anode. Herein, we propose a two step gelatinization strategy to fabricate a gradient RMs (including LiI, TMPD, and DMPZ) gel electrolyte, in which the bare electrolyte gelatinization on the Li surface and then the electrolyte contained RMs sequentially gelled on the formed gel. The RMs mainly distributed at the surface and anchored at the cathode side. By suppressing the shuttle of RMs in the electrolyte and alleviating the passivation of the Li anode, the mid-charging potentials can reach 3.44 and 4.08 V at the 15th cycle with and without the LiI mediator, respectively. The energy efficiency is 63% even at the 150th cycle, whereas the corresponding energy efficiency are only 47% and 51% for the LABs with liquid and normal gel electrolytes, respectively. Moreover, the cycle life of the battery containing the gradient gel electrolyte is three times longer than that with the liquid electrolyte. The gel electrolyte further offers the flexibility of the device, and the laminated cells thus fabricated can readily operate under harsh bending conditions.
研究领域:
电化学
·
能源材料
·
纳米材料
·
界面化学
·
储能技术
·
先进电池
·
功能高分子
·
柔性电子
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 12
·期 6
·5421-5430
·
IF 1.5
Yangyang Xi,Peng Zhang,Haining Zhang,Zhaohui Wan,Wenmao Tu,Haolin Tang
Composite membrane separators are fabricated by coating one side of microporous polyethylene membrane with poly(methyl methacrylate) modified titanate nanoparticles that are synthesized through emulsifier-free emulsion polymerization of methacrylate-functionalized titanate nanoparticles. The formed composite membrane separators exhibit great thermal-shrinking resistance due to the introduction of thermal resistant titanate nanoparticles. After immersed into electrolyte solution, the swelling poly(methyl methacrylate) microspheres leads to the formation of gel electrolyte, thus stabilizing the electrolyte. Moreover, the porous structure of the coated layer can facilitate the swelling of electrolyte and the transport of lithium ions. The thus-assembled lithium ion battery shows an improved cycle performance and rate capability.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子纳米复合材料
·
电池技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）