JOURNAL OF POROUS MATERIALS
·
2020
·Vol. 27
·期 5
·1455-1466
·
IF 2.183
Yuan Zhishuai,Cheng Yuchun,Ma Shoutao,Jiang Zhen,Zhou Yisi,Wang Yingjun,Zhang Wei,Suo Yanhua
A new method called Instant Exactness Synthesis (IES), which was applied to prepare SAPO-11 molecular sieve, was introduced innovatively. The metal–acid bifunctional Ni/SAPO-11-IES catalyst with a Ni content of 4% was prepared by the impregnation method. Ni/SAPO-11-H catalyst was prepared as a comparative sample through the traditional hydrothermal method. In addition, the growth mechanism was used to explain the excellent performance of catalyst prepared by IES method in detail. The structure of Ni/SAPO-11-IES was confirmed via XRD and TEM characterization. The pore structure of the molecular sieve was determined by nitrogen adsorption and desorption. 29 Si MAS NMR measurement was used to illustrate multiple silicon environment which supported the excellent acidity in NH 3 -TPD measurement. Furthermore, the favourable dispersibility of Ni species was proved by the mapping of the elements and EDS. Benefiting from the superior performance of materials, Ni/SAPO-11-IES catalyst exhibited a higher catalytic performance for n-heptane hydroisomerization with n-heptane conversion of 82% and isoheptane selectivity of 86%, respectively, compared with other catalysts in the same system. The study also provides new ideas for the preparation of molecular sieve materials.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Biming Liu,Wenbin Song,Haixia Wu,Yanhua Xu,Yongjun Sun,Yang Yu,Huaili Zheng,Shipeng Wan
In this study, oily sludge (OS) was pyrolyzed into an environmentally friendly OS carbon (OSC) material, which was used as the carrier of CoFe 2 O 4 nanoparticles to prepare a heterogeneous catalyst CoFe 2 O 4 /OSC, and it was used to catalyze the degradation of norfloxacin (NFC) by peroxymonosulfate (PMS). X-ray diffraction (XRD) and transmission electron microscope (TEM) characterization results show that CoFe 2 O 4 /OSC had a spinel structure under high temperature pyrolysis conditions. The effects of initial pH, PMS dosage, catalyst dosage, and temperature on NFC degradation efficiency were also studied. Under a temperature of 25 °C, an initial pH of 7, a catalyst amount of 0.5 g/L, and a PMS dosage of 0.8 mM, the reaction rate constant reached 0.051 min −1 , and the degradation efficiency and total organic carbon of NFC reached 90.8% and 62%, respectively, within 60 min. Trace amounts of Co and Fe ions were leached from the system (both less than 30 μg/L). After ten cycles, the degradation efficiency of NFC decreased to 69.8%. Radical quenching experiments, electron paramagnetic resonance, and X-ray fluorescence spectroscopy characterization proved that free-radical ( OH, SO 4 − , and O 2 − ) and nonradical ( 1 O 2 ) active species were present in the system. Moreover, the CoFe 2 O 4 /OSC/PMS system involved the participation of two pairs of redox couples (Fe(II)/Fe(III) and Co(III)/Co(II)). Results from matrix-assisted laser desorption ionization time-of-flight mass spectrometry and ion chromatography proved that the main oxidation pathways of NFC were formed through the fragmentation of heterocycles, defluorination of benzene rings, decarboxylation reactions, and piperazine ring-opening process. At the same time, NFC was eventually oxidized to fluoride. This study provides potential for the resource utilization of OS and the application of sludge-type catalysts in PMS-activated oxidation systems.
✓ 已验证
DOI
高影响因子
Artificial Cells Nanomedicine and Biotechnology
·
2018
·
IF 3.026
Yang Xia,Huimin Chen,Feimin Zhang,Lin Wang,Bo Chen,Mark A. Reynolds,Junqing Ma,Abraham Schneider,Ning Gu,Hockin H. K. Xu
Literature search revealed no systematic report on iron oxide nanoparticle-incorporating calcium phosphate cement scaffolds (IONP-CPC). The objectives of this study were to: (1) use γFe2O3 nanoparticles (γIONPs) and αFe2O3 nanoparticles (αIONPs) to develop novel IONP-CPC scaffolds, and (2) investigate human dental pulp stem cells (hDPSCs) seeding on IONP-CPC for bone tissue engineering for the first time. IONP-CPC scaffolds were fabricated. Physiochemical properties of IONP-CPC scaffolds were characterized. hDPSC seeding on scaffolds, cell proliferation, osteogenic differentiation and bone matrix mineral synthesis by cells were measured. Our data demonstrated that the osteogenic differentiation of hDPSCs was markedly enhanced via IONP incorporation into CPC. Substantial increases (about three folds) in ALP activity and osteogenic gene expressions were achieved over those without IONPs. Bone matrix mineral synthesis by the cells was increased by two- to three folds over that without IONPs. The enhanced cellular osteogenesis was attributed to: (1) the surface nanotopography of IONP-CPC scaffold, and (2) the cell internalization of IONPs released from IONP-CPC scaffold. Our results demonstrate that the novel CPC functionalized with IONPs is promising to promote osteoinduction and bone regeneration. In conclusion, it is highly promising to incorporate γIONPs and αIONPs into CPC scaffold for bone tissue engineering, yielding substantially better stem cell attachment, spreading and osteogenic differentiation, and much greater bone mineral synthesis by the seeded cells. Therefore, novel CPC scaffolds containing γIONPs and αIONPs are promising for dental, craniofacial and orthopaedic applications to substantially enhance bone regeneration.
✓ 已验证
DOI
PubMed
高影响因子
Polymers
·
2019
·Vol. 11
·期 9
·1467
·
IF 3.164
Lijun Gao,Meiying Huang,Qifeng Wu,Xiaodan Wan,Xiaodi Chen,Xinxin Wei,Wenjing Yang,Rule Deng,Lingyun Wang,Jiuying Feng
Cross-linking is an effective way to enhance biodegradable poly(propylene carbonate) (PPC) from CO2and propylene oxide (PO). Cross-linked PPC can be prepared by one-step terpolymerization of multifunctional third monomers with CO2and PO. However, few such third monomers are available. Each molecule of maleic anhydride oligomer (MAO) contains more than two cyclic anhydride groups. Here, we use it to synthesize PPC with cross-linked networks by adding a small quantity of MAO (0.625–5 wt% of PO) in CO2/PO copolymerization that was catalyzed by zinc glutarate. The formation of networks in the prepared copolymers was confirmed by the presence of gel in copolymers combined Fourier transform infrared spectroscopy (FT-IR),1H NMR, and the improved mechanical properties. The 5% weight-loss degradation temperatures and maximum weight-loss degradation temperatures greatly increase up to 289.8 °C and 308.8 °C, respectively, which are remarkably high when compared to those of PPC. The minimum permanent deformation of the copolymers closes to 0, while that of PPC is 173%. The maximum tensile strength of the copolymers is 25.5 MPa higher than that of PPC, reaching 38.4 MPa, and it still has some toughness with the elongation at break of 25%. The above phenomena indicate that MAO that was inserted in PPC chains play a cross-linking role, which results in enhanced thermal stability, dimensional stability, and mechanical strength, comprehensively.Keywords:poly(propylene carbonate);networks;maleic anhydride oligomer;terpolymerization
✓ 已验证
DOI
PubMed
高影响因子
Journal of Biomedical Nanotechnology
·
2013
·Vol. 9
·期 11
·1921-1928
·
IF 5.256
Jiang Liming,Sun Haizhu,Yuan Anliang,Zhang Kai,Li Daowei,Li Chen,Shi Ce,Li Xiangwei,Gao Kai,Zheng Changyu,Yang Bai,Sun Hongchen
Simvastatin is considered as a stimulator for bone formation. However, the half-life for simvastatin is generally 2 hours, which means, it is difficult to maintain biologically active simvastatin in vivo. To overcome this limitation, we created a system to slowly release simvastatin
in vitro and in vivo. We constructed a poly(lactic-co-glycolic acid)/hydroxyapatite nanofibrous scaffold to carry simvastatin. Releasing assays showed that simvastatin was released from poly(lactic-co-glycolic acid)/hydroxyapatite/simvastatin quickly within ∼15
days, and small amounts continued to be released through day 56 (experiments terminated). MTT assays demonstrated that both poly(lactic-co-glycolic acid)/hydroxyapatite and poly(lactic-co-glycolic acid)/hydroxyapatite/simvastatin promoted MC3T3-E1 cell proliferation. However,
Alkaline phosphatase assays showed that only poly(lactic-co-glycolic acid)/hydroxyapatite/simvastatin scaffold significantly promoted the osteogenic differentiation of MC3T3-E1 cells in vitro on day 14. To further test in vivo, we created calvaria bone defect models and
implanted either poly(lactic-co-glycolic acid)/hydroxyapatite or poly(lactic-co-glycolic acid)/hydroxyapatite/simvastatin. After 4 or 8 weeks post-implantation, the results indicated that poly(lactic-co-glycolic acid)/hydroxyapatite/simvastatin scaffold induced bone formation
more efficiently than poly(lactic-co-glycolic acid)/hydroxyapatite alone. Our data demonstrates that poly(lactic-co-glycolic acid)/hydroxyapatite/simvastatin has the potential to aid in healing bone defects and promoting bone regeneration in the future although we still need
to optimize this complex to efficiently promote bone regeneration.
✓ 已验证
DOI
PubMed
高影响因子
Analytical Methods
·
2020
·Vol. 12
·期 31
·3954-3963
·
IF 2.596
Jiaxin Hu,Cheng Qian,Yinchenxi Zhang,Yonghui Tian,Yixiang Duan
Widespread use of organophosphorus pesticides poses serious environmental threats, and hence calls for effective analysis methods for these classes of compounds. In this study, a lab-made graphene-based solid-phase microextraction (SPME) fiber was fabricated by the sol–gel method and combined with a gas chromatography-flame photometry detector (GC-FPD) to realize the detection of trace OPPs in water samples. Compared to the commercial fiber coatings, the new sol–gel graphene fiber coatings showed advantages of good durability and solvent resistance, which were attributed to the hydrophobic and antibacterial properties of the functionalized graphene and 3-(trimethoxysilyl)propyldimethyloctadecylammonium chloride (QAS). A headspace SPME method in combination with a GC-FPD was established to evaluate the performance of the novel fibers. The proposed method showed a good linear relationship for the eight OPPs (R2 ≥ 0.9957) in the concentration range of 1 to 1000 μg L−1, with limits of quantification of 0.11–3.37 μg L−1 and limits of detection of 0.03–1.01 μg L−1. Furthermore, the developed method also exhibited good recoveries for the analysis of OPPs both in rainwater and lake water, which demonstrates that this method is an alternative choice for multi-residue analysis of OPPs, and it has the potential for broader applications in the future.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Materials Chemistry B
·
2020
·Vol. 8
·期 6
·1316-1325
·
IF 5.344
Danping Ling,Haihong Li,Wensong Xi,Zhuo Wang,Artur Bednarkiewicz,Solomon T. Dibaba,Liyi Shi,Lining Sun
Developing multifunctional nanocomposites for a pH-responsive controlled dual-drug delivery is still a huge challenge. Herein, we report a gentle and simple method for growing metal–organic frameworks (MOFs) that can load two anticancer drugs, namely DOX and 5-FU (doxorubicin and 5-fluorouracil), on the surface of upconversion nanoparticles (UCNPs) by the reactions of Schiff bases and electrostatic adsorption. The resulting pH-responsive UCMOFs@D@5 nanosystem showed effective dual-drug release by the cleavage of chemical bonds and the disruption of the MOF structure under acidic conditions. Moreover, the final nanosystem UCMOFs@D@5 showed much higher cytotoxicity in comparison with UCMOFs@D and UCMOFs@5, which loaded only one kind of drug, respectively, after being incubated with human cervical cancer (HeLa) cells, indicating that Dox and 5-FU released from the final nanosystem had synergistic effects on cytotoxicity. Cellular uptake studies showed that UCMOFs@D@5 was well uptaken by HeLa cells and has potential for bioimaging applications in intracellular fluorescence imaging with high-contrast, and is beneficial for the intracellular localization of anti-cancer drugs. In addition, the nanosystem can be successfully applied in T1-weighted magnetic resonance imaging. Therefore, we developed a visualized tracking agent combined with MOFs to load two anticancer drugs to form a nanosystem for diagnosis and synergistic treatment, thus achieving the bioimaging and stimulation-responsive dual-drug release.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 3
·3032-3044
·
IF 2.195
Zhao Rongjun,Wang Zhezhe,Zou Tong,Wang Zidong,Xing Xinixn,Yang Yue,Wang Yude
One-dimensional fiber-like SnO 2 nanomaterials (SnO 2 nanofibers) were prepared by ‘green’ preparation approach that using shaddock peels as bio-templates via a facile hydrothermal method for the first time. The microstructure, morphology, chemical states and specific surface areas were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and N 2 adsorption–desorption, respectively. Results indicating the as-synthesized SnO 2 are fiber-like structures and composed of numerous nanoparticles, and with large specific surface areas (36.50 m 2 g −1 ). The XPS spectra confirms that the existence of adsorbed oxygen (O ads ) on the surface of product, which may lead to the response of gas sensor. The gas-sensing properties of the sensor based on SnO 2 nanofibers for volatile organic compounds (VOCs) were investigated, such as methanol, ethanol, isopropanol, acetone, formaldehyde and n-butanol. The sensor showed high gas response, low detection limit and fast response towards various VOCs gases at the optimal operating temperature of 260 °C. These results demonstrated the potential of using as-synthesized SnO 2 nanofibers for VOCs gases detection. In addition, the possible formation mechanism and the gas-sensing mechanism were also discussed.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 21
·17016-17022
·
IF 3.289
Mengzhen Dai,Ting Huang,Long Chao,Yueming Tan,Chao Chen,Wenhua Meng,Qingji Xie
Learning from nature emerges as one of the most promising ways to develop advanced functional materials and biodevices. Here, inspired by melanin formation, we report the tyrosinase (Tyr)-catalyzed polymerization of L-DOPA (versus L-tyrosine and dopamine) to immobilize enzymes for amperometric biosensing. The enzymatic polymerization is examined by UV-vis spectrophotometry, scanning electron microscopy and electrochemical methods. A poly(L-DOPA) (PD)-Tyr/glassy carbon electrode (GCE) prepared by casting an aqueous mixture of L-DOPA and Tyr on a GCE exhibits a linear cathodic amperometric response to catechol concentration from 0.4 to 57 μM (R2 = 0.997) with a sensitivity of 4.29 mA mM−1 cm−2 and a limit of detection (LOD) of 70 nM (S/N = 3). A PD-glucose oxidase (GOx)-Tyr/Pt electrode prepared by casting an aqueous mixture of L-DOPA, GOx and Tyr on a Pt electrode exhibits a linear anodic amperometric response to glucose concentration from 2 to 5700 μM (R2 = 0.998) with a sensitivity of 78.6 μA mM−1 cm−2 and a LOD of 0.1 μM (S/N = 3). The PD-based enzyme electrode shows better biosensing performance and higher bioactivity of the immobilized Tyr than those based on similarly biosynthesized poly(L-tyrosine) and polydopamine as well as well-established chitosan and Nafion systems, implying that the biosynthesized PD as a melanin-biomimetic material has promising application potential for biomacromolecular immobilization and biosensing.
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2022
·
IF 3.754
Qianchun Zhang,Fengling Tian,Feifei Meng,Lijuan Zhang,Li Jiang,Shan Tang,Naixia Lv,Linchun Bao
A new type of fluorescent nitrogen-doped carbon dots (N-CDs) were obtained by an economical, green, and feasible hydrothermal treatment using l -arginine and citric acid as carbon sources. The maximum value of the N-CDs fluorescence excitation/emission wavelength was 320/400 nm, showing an ultrahigh fluorescence quantum yield (51.7%). The fluorescence of N-CDs was effectively enhanced via vanillin, due to the combination of internal filtration effect and static polymerization. A fluorometric method was perfectly established for determining trace vanillin in serum, urine, biscuits, and vanillin tablet samples with a wide linear range of 0.0152–15.2 μg/mL, accompanied by the limit of detection is 4.56 ng/mL. Satisfactory recoveries were found to be range from 90.4% to 117%, with a relative standard deviation in the range of 1.5–7.9%. The prepared N-CDs were successfully used for A549 cell imaging. These results indicate that the newly developed and high-efficient nanoprobes N-CDs have great application potential in vanillin detection and cell imaging.
✓ 已验证
DOI
高影响因子
CRYSTAL GROWTH & DESIGN
·
2021
·
IF 4.076
Dandan Wang,Fei Liang,Xinyuan Zhang,Zhanggui Hu,Yicheng Wu
Two new alkali/alkali earth metal and d10 transition metal mixed cyanurate birefringent crystals, Li2Zn2(H2C3N3O3)2(HC3N3O3)(OH)2·2H2O (I) and BaZn2(H2C3N3O3)2(HC3N3O3)(OH)2·2H2O (II), were synthesized by a mild hydrothermal method. Both I and II crystals belong to the tetragonal I41/a space group which is rarely seen in metal cyanurates and feature the novel zero-dimensional crown-like clusters composed of [(H2C3N3O3)4(HC3N3O3)6]16– (AI) and [(H2C3N3O3)4(HC3N3O3)4]12– (AII), forming AIAII∀II∀I shape links due to the existing mirror symmetry. The UV–vis–NIR diffuse reflectance spectrum showed a large band gap of I (5.21 eV). Notably, theoretical calculations illustrated that I and II are the first two positive uniaxial cyanurate crystals due to the crown-like arrangement of standing cyanurate anionic groups. This work promotes I and II as promising ultraviolet birefringent polarizers and a feasible approach for optical anisotropy modulation in other π-conjugated systems.
✓ 已验证
DOI
高影响因子
Environmental Science and Ecotechnology
·
2020
·
IF 0
Pengfei Wu,Yuanyuan Tang,Hangbiao Jin,Yuanyuan Song,Yunsong Liu,Zongwei Cai
The ever-increasing prevalence of microplastics and different bisphenols made the presence of bisphenol-attached microplastics a critical concern. In this study, experiments were performed to examine desorption behaviors and cytotoxicity performance of contaminated microplastics in aquatic surroundings and intestinal environment after ingestion by organisms (cold-/warm-blooded). The kinetic study shows that the rate of desorption for bisphenols can be enhanced threefold under simulated warm intestinal conditions. The Freundlich isotherms indicate multiple-layer desorption of the bisphenols on the heterogeneous surfaces of polyvinyl chloride (PVC) microplastics. Hysteresis was detected in the adsorption/desorption of bisphenols in a water environment, but no adsorption/desorption hysteresis was observed in the simulated intestinal conditions of warm-blooded organisms. Due to enhanced bioaccessibility, the desorption results imply that the environmental risk of contaminated PVC microplastics may be significantly increased after ingestion at a high bisphenols dosage. Although with different IC 50 , the five bisphenols released under the intestinal conditions of warm-blooded organisms can cause higher proliferation reduction in fish and human cell lines than the bisphenols released in water. This study helps elucidate the consequential fate and potential cytotoxicity of contaminated microplastics and the possible implications of the microplastics as a critical vector for bisphenols to increase the potential health risks.
✓ 已验证
DOI
PubMed