Frontiers in Nutrition
·
2022
·
IF 6.59
Zhu Yulian,Liu Keshan,Yuen Michael,Yuen Tina,Yuen Hywel,Peng Qiang
Sea buckthorn peel is the by-product of the sea buckthorn processing, which contains many bioactive compounds. In this paper, sea buckthorn high methoxyl pectin (SBHMP) was obtained, with a yield of 8% and a light-colored. The SBHMP was a high methoxyl with a degree of esterification of 57.75% and uronic acid content of 65.35%. The structural and morphological characterization of SBHMP were analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Results showed that SBHMP presented a sheet and layered stacked morphological, and was mainly composed of galacturonic acid, arabinose, galactose, rhamnose, and mannose, which indicated that SBHMP mainly consisted of homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) type pectin polysaccharides. In addition, SBHMP also presented significant gel, thickening, and emulsifying properties. The results exhibited that SBHMP could form jelly-like gels under acid and high sucrose conditions, presenting a shear-thinning behavior and increasing apparent viscosity with the enhancement of pectin and sucrose contents. Besides, SBHMP could form oil-in-water emulsions with pectin concentrations of 1.0–3.0%. When the SBHMP concentrations were 2.0 and 3.0%, the emulsions were stable during 7 days of storage. Findings in this paper demonstrated the potential of SBHMP to be a food thickener and emulsifier and support the in-depth utilization of sea buckthorn by-products.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COORDINATION CHEMISTRY
·
2017
·
IF 1.795
Wen-Xian Chen,Xiang Zhou,Yi-Fen Gao,Qiu-Ping Liu,Gui-Lin Zhuang
A series of lanthanide-based coordination polymers (Ln2(CBOB)2(OX)·H2O, where Ln = Gd (1), Eu (2), Pr (3), and Tb (4); CBOB = 4-[(4′-carboxybenzyl)oxy]benzoate; OX = oxalate), were obtained from the reaction of H2OX, H2CBOB, and Ln(NO3)3 with the metal salts. Single-crystal measurements show that both 1 and 2 feature unique 3-D structures with the [Ln(COO)n(C2O4)m] layers connected by CBOB ligands. Moreover, 1, 3, and 4 are antiferromagnetic and 2 and 4 display obvious luminescence emission peaks. Furthermore, quantum Monte Carlo (QMC) simulations and the experimental results reveal that the magnetic coupling parameters of adjacent Gd(III) ions in 1 are −0.026(2) and −0.0069(3) cm─1.
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Shuwen Yu,Shichun Li,Yu Liu,Sheng Cui,Xiaodong Shen
Microporous polymers possessing good processability and low cost show promising applications for large-scale industrial membrane separation . The relatively low gas selectivity and physical aging of microporous polymer membranes are current challenges which become more serious for ultrathin membranes. Crosslinking is an effective way to improve gas selectivity and physical aging resistance of glassy polymers , and the cross-linked ultrathin membranes can be directly produced by interfacial polymerization (IP). However, there are only a few reports of IP formed microporous polymer membranes, and the reported gas separation performance is not satisfying. In this work, ultrathin microporous polyarylate (PAR) membranes were prepared by IP of 5,5′,6,6′-tetrahydroxy-3,3,3′,3′-tetramethylspirobisindane (TTSBI) and trimesoyl chloride (TMC). The crosslinking structure, molar ratio of TTSBI to TMC ( n (TTSBI) / n (TMC) ) in PAR, and membrane thickness characterized by zeta potential measurements, X-ray photoelectron spectroscopy and scanning electronic microscope were optimized by adjusting IP parameters such as pH value of aqueous phase that decides the hydrolysis of both TTSBI and TMC in IP, and the concentrations of TTSBI and TMC. The microporous structures of PAR characterized by CO 2 adsorption are highly relevant to the n (TTSBI) / n (TMC) in PAR. The resulted membranes exhibit CO 2 permeance in a wide range of 100–2115 GPU with CO 2 /N 2 selectivity of 45–21 that is a remarkable improvement in gas separation performance of IP formed microporous polymer membranes and also shows significant advantages over other reported ultrathin microporous polymer membranes. In addition, the membranes also exhibit excellent stability, and only 29% decrease in CO 2 permeance was observed after 180 h aging. This work provides an effective strategy to fabricate high-performance and stable microporous polymer membranes by IP, which is expected to push the particle applications of microporous polymer membranes in gas separation.
✓ 已验证
DOI
高影响因子
SEPARATION SCIENCE AND TECHNOLOGY
·
2012
·
IF 1.088
Jie-Ping Fan,Jing Cao,Xue-Hong Zhang,Jun-Zhong Huang,Tao Kong,Sheng Tong,Zhe-You Tian,Jian-Hang Zhu,Xiao-Kun Ouyang
Various ionic liquid-based aqueous two-phase systems (IL-ATPS) were evaluated to extract puerarin. The results indicated that the nature of ILs, the salting-out ability of salt, and the acidity and basicity of the salt-rich solution had important influence on the extraction efficiency. Various factors were optimized systematically, that is, the amount of IL, salt, puerarin, and short-chain alcohol. Under the optimal experimental conditions (the amount of K2HPO4 0.30–0.42 g/mL, [Bmim]Br 0.30–0.36 g/mL and 1.0 mL puerarin stock solution), the extraction efficiency of puerarin was over 99% by a single-step extraction, which indicated that the evaluated IL-ATPS was a prospective extraction medium. Finally, the IL-ATPS was successfully used to extract puerarin from Radix Puerariae Lobatae extracts.
✓ 已验证
DOI
高影响因子
Scientific Reports
·
2024
·Vol. 14
·期 1
·1-11
·
IF 3.8
Wei Zhengyu,Shen Zhisen,Deng Hongxia,Kuang Tairong,Wang Jinggang,Gu Zhipeng
Using three-dimensional (3D) printing technology to make the porous tantalum plate and modify its surface. The physicochemical properties, cytocompatibility, antioxidant capacity, and histocompatibility of the modified materials were evaluated to prepare for the repair of craniomaxillofacial bone defects. The porous tantalum plates were 3D printed by selective laser melting technology. Tantalum plates were surface modified with a metal polyphenol network. The surface-modified plates were analyzed for cytocompatibility using thiazolyl blue tetrazolium bromide and live/dead cell staining. The antioxidant capacity of the surface-modified plates was assessed by measuring the levels of intracellular reactive oxygen species, reduced glutathione, superoxide dismutase, and malondialdehyde. The histocompatibility of the plates was evaluated by animal experiments. The results obtained that the tantalum plates with uniform small pores exhibited a high mechanical strength. The surface-modified plates had much better hydrophilicity. In vitro cell experiments showed that the surface-modified plates had higher cytocompatibility and antioxidant capacity than blank tantalum plates. Through subcutaneous implantation in rabbits, the surface-modified plates demonstrated good histocompatibility. Hence, surface-modified tantalum plates had the potential to be used as an implant material for the treatment of craniomaxillofacial bone defects.
✓ 已验证
DOI
PubMed
高影响因子
Small
·
2023
·
IF 13.3
Bolun Lu,Qiuyu Zhao,Zhengwei Cai,Shutong Qian,Jiayi Mao,Liucheng Zhang,Xiyuan Mao,Xiaoming Sun,Wenguo Cui,Yuguang Zhang
The cellular functions, such as tissue-rebuilding ability, can be directly affected by the metabolism of cells. Moreover, the glucose metabolism is one of the most important processes of the metabolism. However, glucose cannot be efficiently converted into energy in cells under ischemia hypoxia conditions. In this study, a high-energy intermediate fructose hydrogel (HIFH) is developed by the dynamic coordination between sulfhydryl-functionalized bovine serum albumin (BSA-SH), the high-energy intermediate in glucose metabolism (fructose-1,6-bisphosphate, FBP), and copper ion (Cu 2+ ). This hydrogel system is injectable, self–healing, and biocompatible, which can intracellularly convert energy with high efficacy by regulating the glucose metabolism in situ. Additionally, the HIFH can greatly boost cell antioxidant capacity and increase adenosine triphosphate (ATP) in the ischemia anoxic milieu by roughly 1.3 times, improving cell survival, proliferation and physiological functions in vitro. Furthermore, the ischemic skin tissue model is established in rats. The HIFH can speed up the healing of damaged tissue by promoting angiogenesis, lowering reactive oxygen species (ROS), and eventually expanding the healing area of the damaged tissue by roughly 1.4 times in vivo. Therefore, the HIFH can provide an impressive perspective on efficient in situ cell energy supply of damaged tissue.
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Jiandong Han,Kexin Zhang,Zilong Rao,Jiaxin Chen,Yue Meng,Daping Quan,Ying Bai
There have been great technical challenges in preparation of a transparent polymeric thin film with Janus-type antifouling and bioadhesive properties on both surfaces, while maintaining the optical and mechanical characteristics of the bulk material. Herein, poly(2-hydroxyethyl methacrylate) (PHEMA), which is commonly used as an ophthalmic hydrogel, was employed as the bulk material for allowing consecutive surface grafting of functional polymer brushes, which eventually resulted in a Janus-type transparent thin film for potential biomedical implantation. First, a bromine-containing reagent served as the reactive initiator was silanized onto both surfaces of the PHEMA hydrogel thin film under a mild condition. Then, with the presence of selected physical shielding on one side using a scotch tape, polymer brushes with cell-adhesive Arg-Gly-Asp (RGD) peptide pendent groups were grafted from the other side of the PHEMA thin film, resulted in a highly improved cell attachment capability. Once the tape was removed and the RGD-modified surface was shielded, the zwitterionic polymer brushes comprising poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) segments were grafted on the surface, again through surface-initiated activators regenerated by electron transfer atom-transfer radical polymerization (SI-ARGET-ATRP). Hence, this side of the PHEMA film became super hydrophilic and exhibited antifouling properties on the surface. After the surface grafting modification, the whole PHEMA hydrogel maintained highly transparent and biocompatible for potential ophthalmic applications. This study provides a simple and rather universal strategy for fabricating Janus-type polymeric thin films with distinct biophysical/biochemical properties on both sides, which potentially applicable for the multifunctional requirements in biomedical applications.
✓ 已验证
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2026
·
IF 2.5
Miaoyang Hu,Jie Xie,Hongchao Zhang,Xinjing Wang,Linlin Wu,Hongxia Guan,Jun Wang,Jie Cheng,Lei Jiang,Ke Wei,Rong Gao
Nonalcoholic fatty liver disease (NAFLD) is fundamentally characterized by dysregulated hepatic lipid metabolism. Recent evidence suggests that peripheral neurotransmitter metabolism may be involved in NAFLD pathogenesis, yet the relationship between neurotransmitter and lipid metabolism remains incompletely understood. This study employed targeted serum metabolomics to simultaneously investigate alterations in the kynurenine (KYN) pathway and lipid metabolism. Using liquid chromatography-tandem mass spectrometry (LC-MS/MS), we identified a concurrent reduction in serum levels of KYN pathway metabolites, including KYN, xanthurenic acid (XA), and its precursor tryptophan (TRP), in NAFLD patients. These changes were significantly accompanied by dysregulated levels of palmitic acid (PA), arachidonic acid (AA), and eicosapentaenoic acid (EPA). Method validation confirmed analytical reliability, with limit of detection (LOD) of 0.2–5 ng/mL and limit of quantification (LOQ) of 0.5–10 ng/mL for both KYN metabolites and fatty acids. Calibration curves displayed excellent linearity (R 2 > 0.995), and both intra-day and inter-day precision was satisfactory, with recovery rates meeting validation criteria. To validate these associations, an HFD-induced NAFLD mouse model was used. Parallel reductions in KYN pathway metabolites and dysregulated fatty acid metabolism were observed in the liver. Logistic regression with false discovery rate (FDR) correction revealed that most KYN metabolite levels varied concordantly with fatty acid levels in mice. In summary, this study provides the first systematic demonstration of concurrent dysregulation of the KYN pathway and lipid metabolism in NAFLD, supported by robust chromatographic-mass spectrometric validation. The observed parallel metabolic disturbances offer new perspectives for therapeutic strategies targeting NAFLD.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Pharmaceutical Analysis
·
2026
·
IF 11.2
Shuohan Cheng,Shuo Wang,Tianfang Lan,Hongtao Jin,Zhou zhi,Zhonghua Wang,Zeper Abliz
Diabetic eye disease (DED) is a leading cause of vision impairment worldwide, yet the molecular mechanisms underlying its progression remain incompletely understood. In this study, we applied a dual-platform spatial metabolomics strategy integrating air flow-assisted desorption electrospray ionization mass spectrometry imaging (AFADESI-MSI) and matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI) to characterize spatial metabolic alterations in the eyes of diabetic rats. Data-driven segmentation of retinal micro-regions using SCiLS Lab software enabled fine-scale mapping of metabolic heterogeneity. Physiological, biochemical, and histopathological analyses were combined with spatial metabolite mapping to construct a metabolic atlas and evaluate the regulatory effects of ferulic acid. We established a comprehensive spatial metabolome atlas of the rat eye, identifying 135 annotated metabolites and revealing significant region-specific metabolic heterogeneity. Unsupervised k-means clustering was further applied to the high-resolution MALDI-MSI data, successfully delineating distinct functional micro-regions of the retina solely based on endogenous metabolic profiles, demonstrating the power of data-driven tissue segmentation. In diabetic eyes, 39 metabolites were significantly dysregulated, involving amino acid, glucose, lipid, and redox metabolism. Notably, lysine, arginine, carnitine, and GSH were depleted, while glucose-6-phosphate (G6P), glycerol-3-phosphate (G3P), and pro-inflammatory lipids were elevated, highlighting profound metabolic reprogramming across ocular compartments. Ferulic acid treatment restored nine key metabolites, alleviated oxidative stress, normalized lipid and glucose metabolism, and improved retinal structural integrity in a dose-dependent manner. This study shows that integrating mass spectrometry imaging with data-driven tissue segmentation reveals spatial metabolic reprogramming in DED and highlights ferulic acid as a promising therapeutic candidate.
✓ 已验证
产品关联
DOI
高影响因子
WEAR
·
2026
·
IF 7.2
Qingke Yu,Weisheng Zheng,Jiangtao Yu,Yan Lou,Pan Guo,Guijian Huang,Mingyu Liu
Micro moulds are widely used in the fabrication of micro/nano structures, where wear resistance is critical. This study presents a mixed phosphonic acid self-assembled monolayers (SAMs)-modified Zr-Cu-Al-Ni bulk metallic glass (BMG), which not only retains hydrophobic properties but also demonstrates exceptional high-temperature tribological performance. The wear behavior and mechanisms were systematically studied in the range from room temperature (RT) to 250 °C. Tribological tests were conducted using a multifunctional friction and wear tester in a ball-on-disk configuration, with polyetheretherketone (PEEK) balls as the counterface material against both bare and SAMs-modified Zr-based BMG specimens. The evolution of wear mechanisms in the PEEK-SAMs-modified BMG tribosystem at different temperatures was analyzed, particularly focusing on the coupled effects of the PEEK glass transition temperature and the melting and decomposition temperatures of SAMs on the tribosystem. Results demonstrate that the wear rate of Zr-Cu-Al-Ni BMG exhibits a progressive decrease within the RT to 140 °C range, declining from 53.26 × 10 −6 mm 3 N −1 m −1 to 0.156 × 10 −6 mm 3 N −1 m −1 .At RT, abrasive and minor oxidative wear dominate. Between 90 °C and 140 °C, molten SAMs films provide stable lubrication, with the friction coefficient dropping to 0.004 at 110 °C, indicating full lubrication, while maintaining hydrophobicity. At 150 °C, exceeding the glass transition temperature of the ball material (PEEK), the ball softens and increases the wear rate to 0.324 × 10 −6 mm 3 N −1 m −1 . The wear mechanism in this stage is still dominated by oxidative wear due to high temperature. Interestingly, at 200-250 °C, the friction coefficient follows a different trend, initially increasing, then decreasing, and stabilising after 800-1000 s. At stabilization, the friction coefficient matches that of unmodified BMG, while the wear rate rises to 17.205 × 10 −6 mm 3 N −1 m −1 , attributed to the thermal decomposition of SAMs and lubrication film failure. sam softening promotes adhesive wear and becomes the dominant mechanism. Meanwhile, interfacial property analysis systematically reveals the temperature-dependent effects on the chemical bonding, molecular ordering, and adsorption density of SAMs, elucidating their collective impact on wear evolution. This study demonstrates the exceptional wear resistance of SAMs-modified Zr-Cu-Al-Ni BMG, particularly at 110 °C, and further reveals that molecular interface engineering provides a novel design strategy for high-temperature wear-resistant metallic systems beyond conventional bulk strengthening approaches.
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2026
·
IF 4.3
Jie Hu,Liying Wang,Yihan Li,Zhenzhu Cao,Yongfeng Zhang
To develop a low-carbon and highly efficient alternative to the energy-intensive Haber-Bosch process for ammonia synthesis, this study designed a Zr, Fe bimetallic organic framework (ZrFe-MOF) using 1,4-Benzenedioic acid (H 2 BDC) as the organic ligand and Zr 4+ /Fe 3+ as dual metal centers via a hydrothermal synthesis method. The resulting material was systematically investigated for its performance in photocatalytic and piezoelectric (under ultrasonic conditions) synergistic nitrogen reduction reaction (PPNRR).The synergistic coordination of trivalent and tetravalent metal ions engenders an augmented density of coordination defects and active sites within the material framework. Structural characterization confirmed that Fe species were uniformly dispersed within the Zr-BDC matrix, forming a stable coordination structure . The optimal ZrFeBDC-55 exhibited distinct piezoelectric properties and achieved an ammonia production rate of 7026.85 μmol·L −1 ·h −1 ·g −1 , under the synergistic effect of light and ultrasound, significantly outperforming monometallic Zr-BDC and Fe-BDC, respectively. Mechanistic analysis revealed that the bimetallic synergy introduced sub-bandgap energy levels that effectively suppressed recombination of photogenerated electron-hole pairs, while the more negative conduction band potential enhanced the catalyst’s reduction capability. Furthermore, the piezoelectric effect promoted efficient charge carrier separation and migration under ultrasonic conditions. The catalyst demonstrated excellent recyclability, maintaining both structural integrity and catalytic activity over four cycles. Notably, irrigation of rice seedlings with the synthesized ammonia solution resulted in a 32% increase in plant height and optimized root development, verifying agricultural application potential. This work presents a novel strategy for high-performance photopiezoelectric catalysts for nitrogen reduction and lays a foundation for low-carbon agricultural nitrogen supply technologies.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Xin Zhao,Xiaolong Zhang,Xiaotong Zhu,Zengming Yang,Zhengsong Qiu
In deep oil and gas drilling, high temperatures can lead to the deterioration of drilling fluid performance. Existing physical cooling method and high-temperature-resistant drilling fluid additives have struggled to address this challenge. This study proposes utilizing the phase change energy storage to intelligently cool the drilling fluid. LiNO 3 @SiO 2 microcapsules (PCMMs) were fabricated through interfacial polymerization, with LiNO 3 serving as the core and SiO 2 as the wall material. Basic characteristics of PCMM were studied and its temperature-regulating effect, strength, and compatibility with oil-based drilling fluids (OBDFs) were systematically investigated. The results suggested that the phase transition temperature of PCMM was 249.4 °C, the phase transition enthalpy was 140.86 J/g, and the enthalpy retention was 93.28% after 30 cycles of cooling and heating cycles, which provided good cycling stability. 8% PCMM extended the heating time of thermal oil from room temperature to 260 °C by 115.6% (from 51 min to 110 min), and compared with the blank sample without PCMM, the maximum temperature difference during the heating process was 52 °C, indicating that it can effectively regulate the drilling fluid temperature. Furthermore, the microcapsules are compatible with OBDFs with a concentration not exceeding 8%. This study can provide new ideas for regulating the performance of drilling fluids in deep oil and gas formations with high temperatures.
✓ 已验证
产品关联
DOI
高影响因子