CELLULOSE
·
2019
·Vol. 26
·期 5
·3387-3399
·
IF 3.917
Zhang Chuanjie,Tian Jiaxin,Rao Weida,Guo Bin,Fan Lingling,Xu Weilin,Xu Jie
Metal-organic frameworks (MOFs) are recently attracting more and more interests as supercapacitor electrode materials. However, their low conductivity largely thwarts their capacitance performance. Herein, fabric electrodes for flexible supercapacitors were successfully fabricated by depositing polypyrrole (PPy) nanotubes and Zr-based MOF (UiO-66) particles on cotton fabrics. The PPy nanotubes could serve as conductive connectors to bridge the UIO-66 particles due to their superior conductivity with one-dimensional structure. The conductivity of the PPy@UIO-66@cotton fabric electrode was increased to 14.29 S cm −1 . A specific capacitance of 565 F g −1 at a current density of 0.8 mA cm −2 was obtained for the PPy@UIO-66@cotton fabric electrode. In addition, the proposed fabric electrode exhibited good cycling stability with capacitance retention of 90% after 500 charge–discharge cycles and excellent rate capability. This study confirmed the combination of MOFs and PPy nanotubes has great application prospect in fabric-based flexible supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2019
·Vol. 9
·期 9
·1283
·
IF 4.034
Hao Zhang,Xiaobo Shi,Jialiang Li,Parveen Kumar,Bo Liu
In this study, Zeolitic Imidazolate Framework-8 (ZIF-8)-loaded UiO-66-NH2was synthesized, characterized, and analyzed for its potential to efficiently remove dyes. The selective adsorption on ZIF-8-loaded UiO-66-NH2or its parent MOFs (UiO-66-NH2and ZIF-8) in the mixed dyes solution was explored, including anionic dye (methyl orange (MO)) and cationic dyes (methylene blue (MB) and rhodamine B (RhB)). ZIF-8-loaded UiO-66-NH2displayed much better selectivity to MB than its parent MOFs. Adsorption capacity of ZIF-8-loaded UiO-66-NH2(173 mg/g) toward MB was found to be 215% higher than UiO-66-NH2(55 mg/g). A kinetics study based on adsorption data demonstrated that the adsorption process most closely matched with the model of pseudo-second-order kinetic and Langmuir isotherm. The adsorption was an exothermic and spontaneous physical process as revealed by the values of thermodynamic parameters. Furthermore, reusability of ZIF-8-loaded UiO-66-NH2was investigated and revealed the significant regeneration efficiency in adsorption capacity for MB even after four adsorption cycles. Experimental results proved that the interaction between ZIF-8-loaded UiO-66-NH2and MB was mainly affected by the mechanism, for instance, electrostatic interaction as well as π–π stacking interactions.Keywords:ZIF-8;UiO-66-NH2composites;metal-organic frameworks;selective adsorption
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2014
·
IF 2.063
Yan Cao,Yunxia Zhao,Zijian Lv,Fujiao Song,Qin Zhong
New composites of UiO-66 and graphene oxide (GO) were synthesized and tested as CO 2 adsorbents at room temperature. The materials and the parent composite components were characterized using X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), nitrogen adsorption–desorption isotherm analysis, scanning electron microscopy (SEM), and FT-IR spectroscopy. The CO 2 isotherms on the UiO-66/GO composites and the UiO-66 were measured by a static volumetric method separately. Experiments of multiple adsorption/desorption cycles were conducted to estimate reversibility of CO 2 on the UiO-66/GO. The results showed that the BET surface area of the composites was higher than that of the parent UiO-66, and the adsorption capacities of CO 2 on the composites were greatly higher than that on the UiO-66 sample. The composite UiO-66/GO-5 exhibited the maximum CO 2 uptake of 3.37 mmol/g at 298 K and 1 bar, which increased by 48% in comparison with that of the UiO-66, and was much higher than those of the conventional activated carbons and the zeolites. The CO 2 adsorption capacity was dependent on the BET surface area and the micropore volume of the composites. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of UiO-66/GO-5 was fairly stable, without noticeable degradation in the adsorption capacity of CO 2 after 6 cycles. Therefore, this kind of composites has a potential application on CO 2 capture technologies to mitigate global warming.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 23
·17601-17605
·
IF 3.84
Yueyue Tan,Wei Zhang,Yilong Gao,Jianxiang Wu,Bohejin Tang
Metal organic frameworks (MOFs), a kind of crystalline porous material, have attracted much attention due to their high surface area and controllable porous structure. In this paper, we present a new synthesis of Zr-based MOFs with high electrochemical performance by a facile synthetic method of changing the reaction temperature and stirring condition. By varying the reaction temperature, different particle sizes and degrees of crystallization can be obtained. This paper focuses on the electrochemical properties of Zr-based MOFs as electrode materials in supercapacitors. The maximum specific capacitance of Zr-MOF1 obtained at 50 °C can reach up to 1144 F g−1 at a scan rate of 5 mV s−1, which is far higher than Zr-MOF2 (811 F g−1), Zr-MOF3 (517 F g−1) and Zr-MOF4(207 F g−1). The results of electrochemical measurements show that the Zr-MOF1 we synthesized has excellent capacitance performance and good cycling stability over 2000 cycles, which makes it a promising supercapacitor electrode material.
✓ 已验证
DOI
高影响因子
CRYSTAL GROWTH & DESIGN
·
2017
·
IF 4.055
Yitong Han,Min Liu,Keyan Li,Qiao Sun,Chunshan Song,Guoliang Zhang,Zongchao Zhang,Xinwen Guo
Controlled synthesis of metal–organic frameworks (MOFs) in nanometer scale is highly desired for the optimization of properties and the extending of applications. In this work, Cu2O was used as additive for the first time in the synthesis of zirconium-based MOF UiO-66. We found that the amount of Cu2O additive had an important impact on downsizing the crystal size of UiO-66. Cu2O additive plays a role of rate controller of crystal growth of UiO-66 crystals by their competitive coordination behavior with the linker H2BDC between the [Zr–O] clusters. This generates a depleted H2BDC concentration for the coordination with the [Zr–O] clusters for constructing the UiO-66 framework, which favors the production of small crystals. As a result, well-dispersed nanometer scale UiO-66 crystals with mean crystal size of 40 nm can be easily synthesized by the addition of Cu2O. The as-synthesized nanometer scale UiO-66 crystals have a pure crystal structure with high crystallinity and superior porosity.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Chenling Yao,Huan Zeng,Caiqin Wu,Di Wang,Wenbo Ma,Guilong Li,Jialing Zhou,Jian Wang
Converting the salinity gradient between seawater and river water into osmotic energy is one of the direct and effective ways to alleviate the energy crisis. High selectivity and permeability are two contradictory aspects in the design of composite membranes , and balancing the relationship between the two is the key to achieving efficient osmotic energy harvesting . Herein, a series of heterogeneous membranes consisting of UiO-66-NH 2 intercalated with poly (sodium 4-styrenesulfonate) (PSS) and anodized aluminum oxide (AAO) were designed to enhance the osmosis power generation capacity. The asymmetry of pore size, surface charge, and wettability of the composite membrane makes it behavior like a diodes-like ionic current rectification (ICR). The addition of PSS changes the ion selectivity and permeability of the composite membrane, thus enhancing the energy harvesting performance. The maximum power density of 6.32 W/m 2 is obtained under a 50-fold salinity gradient, which is 4.94 times that of the original composite membrane. This study provides a reasonable preparation strategy for functionalized MOF-based composite membranes for ion transport and efficient osmotic energy conversion.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2024
·
IF 2.3
Zhao Chunzhi,Mao Dongsen,Meng Tao,Guo Qiangsheng,Yu Jun
Owing to the intrinsic nature of the uniformed topologies and ultrasmall Zr 6 nodes of Zr-MOFs, herein, we employed Zr-MOFs (UiO-66 and UiO-67), as opposed to the support of traditional ZrO 2 , to prepare the Pd catalysts for toluene degradation. Compared with the catalysts of Pd/UiO-66 and Pd/ZrO 2 , Pd/UiO-67 catalyst boosted an excellence catalytic performance for toluene degradation, giving the lowest T 90% value of 235 °C with long-term stability. With the assisting of the cavity confinement of Zr-MOFs, Pd nanoparticles are prone to be encapsulated in the 3D frameworks of Zr-MOFs, and the bigger micropores of UiO-67 are more conducive to the formation of larger Pd nanoparticles. The in situ FT-IR results further declared that although the active sites are partly sacrificed due to the larger Pd nanoparticles formed in UiO-67, the stable adsorbed toluene on Pd/UiO-67 boosted the quick degradation of toluene in the reaction interval even without undergoing intermediate processes of benzoate and benzaldehyde. Graphical Abstract UiO-66, UiO-67 and ZrO 2 were employed to prepare the Pd catalysts for toluene degradation, Pd/UiO-67 catalyst boosted an excellence catalytic performance with long-term stability.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2024
·
IF 3.9
Jingwei Yuan,Wanyin Xu,Yirong Wang,Shao Wang,Ronghui Hao,Yubing Dong,Qianqian Li,Yufeng Zhao
Metal-organic frameworks (MOFs), characterized with highly ordered porous structures and relatively high surface area, exhibit significant application potential in the field of electrochemistry catalysis. In this study, we successfully prepared UiO-66(Ce) particles with uniform nanocube morphology and the size distribution ranging from 90 to 156 nm. Both morphology and size can be precisely tuned by directly adjusting detailed synthesis parameters, including solvent concentration and reaction time. Moreover, the crystal growth mechanism of UiO-66(Ce) was comprehensively investigated through the microstructure characterization. Such uniform particles demonstrated a desirable electrocatalytic performance with hydrogen evolution reaction (HER) overpotential of 118.6 mV (at 10 mA cm −2 ) in alkaline electrolyte (1 M KOH). This study not only introduces a novel approach for the morphological manipulation of UiO-66(Ce), but also presents new material candidates for the advancement of high-performance electrochemical energy conversion systems.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Senwei Jiang,Hangzhen Lan,Zhen Wu,Daodong Pan,Yichun Wu
This study focuses on the synthesis, characterization, and adsorption performance of a series of UiO-66-based materials for the adsorption of alkylphenols such as bisphenol A (BPA), 4-butylphenol (4-BP), and 4-pentylphenol (PP). The UiO-66 series, including UiO-66-NH 2 –50 %, mesoporous UiO-66 (HCl‑meso-UiO-66), and 4-pentylbenzoic acid-modified 4‑meso-UiO-66, were prepared through a combination of thermal and chemical modifications. Transmission electron microscopy analyses confirmed the successful creation of mesoporous structures, while FT-IR and XPS spectroscopy validated the chemical modifications. The adsorption performance was evaluated through kinetic and isotherm studies, employing pseudo-first-order and pseudo-second-order models as well as Langmuir and Freundlich isotherm models. The results indicated rapid initial adsorption rates, with equilibrium reached within 40 min. The pseudo-second-order model provided the best fit for the kinetic data, while the Freundlich model better described the adsorption behavior for 4-BP and PP, suggesting multilayer adsorption on heterogeneous sites. Thermodynamic studies indicated that 4-BP adsorption is endothermic and non-spontaneous, while BPA and PP adsorption exhibited exothermic and spontaneous characteristics. The study also explored the adsorption mechanisms, highlighting the importance of hydrophobic interactions and size-exclusion effect in the adsorption process. Hydrogen bonding and π-π stacking, although present, was not the primary determinant. The findings underscore the potential of 4‑meso-UiO-66, which exhibited the highest adsorption capacity, particularly for PP, driven by its enhanced pore accessibility, despite a smaller surface area compared to UiO-66-NH 2 –50 %, and hydrophobicity. This work provides valuable insights into the design of efficient adsorbents for alkylphenols enrichment and separation.
✓ 已验证
产品关联
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2024
·
IF 6.9
You-yun Gong,Zi-ang Jia,Yiwen Fan,Jin-ping Cheng
Rational chemical modification engineering of metal-organic frameworks (MOFs) is an effective means to improve their CO 2 capture efficiency. In this study, we prepare UiO-66 MOF impregnated with different types of aliphatic amines using solvothermal and impregnation techniques, respectively, and investigated their performances in CO 2 adsorption and CO 2 /N 2 separation using the isothermal adsorption method. Aliphatic amines successfully chemically modifies UiO-66, and their molecules effectively occupied the pores of the UiO-66 framework, which has been confirmed by material characterization, experiments, and DFT-FMO calculations. There are significant improvements in the ability to capture CO 2 when aliphatic amines were added to UiO-66 compared to pure UiO-66 (1.39 mmol/g up to 2.11 mmol/g-2.53 mmol/g), attributed to the different types and numbers of amines, and there were also differences in the Zr metal clusters and BDC ligands. Meanwhile, The material has better CO 2 /N 2 adsorption IAST selectivity(98) because its surface area is changed and N 2 does not interact specifically with the adsorbent. Furthermore, the CO 2 adsorption capacity remains constant across multiple adsorption cycles, highlighting the adsorbent's stability and reliability during repetitive CO 2 capture. This study provides new ideas and perspectives for improving the CO 2 capture efficiency of UiO-66.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2025
·
IF 7.7
Song He,Junqing Zhu,Hongliang Sheng,Jiayi Tang,Tao He,Jinfeng Ji,Yajun Huang
The existence of TC residues in the environment and the resultant development of opposition mechanisms constitute a serious menace to both ecological systems and human health. In the present study, UiO-67-bpy-X gels were prepared by the introduction of H 2 bpydc ligands and acetic acid modifiers, followed by a systematic evaluation of their TC adsorption capabilities. Characterization results revealed that UiO-67-bpy-2.4 gel displayed raised specific surface area (1953 m 2 g −1 ) and a graded porous structure. When conditions were optimized, the material manifested a maximum TC adsorptive capacity of 404.1 mg g −1 , outperforming the performance of most reported adsorbents. The kinetic modeling and adsorption isotherm analyses implied that chemical adsorption constituted the dominant uptake pathway. The adsorptive mechanism was further analyzed by XPS, FT-IR, and DFT calculations, which can be attributed to the synergistic effects of metal coordination, electronic interaction, hydrogen bonding, and π-π interaction. Furthermore, the material exhibited good structural stability, retaining 85.945 % of its original adsorptive capacity after six cycles. These findings suggested that UiO-67-bpy-2.4 gel held significant promise as environmental remediation materials, offering high adsorptive capacity and ease of recycling, thereby presenting a novel approach to addressing TC contamination.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHIRALITY
·
2025
·Vol. 37
·期 8
·e70049
·
IF 3
Jia Huang,Yizhuo Ma,Maria Abbasi,Junzhe Qin,Mingxuan Li,Zi Yang,Xuran Sun,Wei Wang,Zhen Wang,Fang Liu,Luo Aiqin,Lina Geng
As enantiomers can have different pharmacological and toxicological impacts even though they have the analogous chemical composition, efficient chiral separation is crucial. Chromatography is one of the primary methods for separating enantiomers, and the key to chromatographic separation lies in the chiral stationary phase (CSP). Chiral porous materials have emerged as innovative chiral stationary phases and garnered extensive attention. Zr based MOF materials, have been regarded as one of the most stable metal–organic framework (MOF) materials. In this paper, after grafting with L-proline, UiO-66 was used for the first time for chiral gas chromatography separation. The newly developed CSP provided high resolution for xylenes within only 2–3 min. For substances like linalool, α-pinene, and xylenes, the UiO-66-NH 2 -L-Pro–coated capillary column acquired bas3ic resolution and showed outstanding enantiomeric and positional isomer isolation. Comprehensive characterizations, including SEM, XRD, FT-IR, TGA, N 2 adsorption–desorption isotherms, CD spectra, and XPS, were conducted to analyze the material stucture and chiral recognition mechanism. The chiral separation relies on transient diastereomeric complexes formed between L-proline and enantiomers, stabilized by hydrogen bonding, intermolecular forces, and steric constraints within UiO-66's micropores. These interactions enforce enantioselective discrimination via the pore's stereochemical filtering, enabling chiral resolution. This study is expected to provide significant value for both chromatographic chiral separation and large-scale chiral substance separation.
✓ 已验证
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）