FOOD HYDROCOLLOIDS
·
2023
·
IF 10.7
Shuifang Mao,Yanming Ren,Changqing Wei,Shiguo Chen,Xingqian Ye,Tian Jinhu
Antibacterial food packaging with slow and sustained release of antibacterial agents exerts a crucial role in ensuring food quality and safety. Herein, metal-phenolic networks based on epigallocatechin gallate (EGCG) and iron (Fe), as well as thyme essential oil nano-emulsion (TEON) were successfully incorporated into sodium alginate (SA) matrix to prepare SA-based films through solution casting method. The effects of EGCG/Fe and different concentrations of TEON on the morphology, structure, physical properties, and functional characteristics of SA-based films were systematically analyzed. Results showed that the addition of EGCG/Fe and TEON significantly enhanced the mechanical intensity, flexibility, thermal stability, UV shielding, water vapor barrier performance, and oxygen barrier ability of the SA-based films. In addition, the introduction of TEON made the SA-based films slow-release of thyme essential oil, which obviously enhanced the antioxidant and dynamic antimicrobial properties of the films. Ultimately, the SA-based film revealed an outstanding preservation effect on pork by significantly reducing the increase rate of pH value and total plate count of pork. This developed SA-based films loaded with EGCG/Fe and TEON were expected to become a potential antibacterial material with slow-release properties for food packaging applications.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Xinyu Song,Yang Shi,Zelin Wu,Bingkun Huang,Xinhao Wang,Heng Zhang,Peng Zhou,Wen Liu,Zhicheng Pan,Zhaokun Xiong,Bo Lai
The discriminative activities and mechanisms for activation of O-O bond in peroxy compounds via single-atom catalysts (SACs) especially with a higher coordination number (M-N 5 ) are rarely explored. Herein, the atomic catalyst (Fe-SAC) with Fe-N 5 as the active center was constructed, which could simultaneously and effectively activate peroxymonosulfate (PMS), peroxydisulfate (PDS), and hydrogen peroxide (H 2 O 2 ). Density functional theory (DFT) calculations combined with experiments results demonstrated that the degradation efficiencies of acyclovir were corresponding to the changes of O-O bond length in various peroxy compounds. Meanwhile, the experiments exposed that the three oxidants all produced • OH, but the PMS also contained 1 O 2 and Fe(IV)=O, and PDS contained O 2 •- additively. The scale-up experiment showed Fe-SAC could operate steadily for nearly 7 d. Overall, this work unveils the discriminative mechanisms for activation of O-O band in different Fenton-like systems. Moreover, the Fe-SAC with high coordination numbers has excellent catalytic properties and practical performance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Yin Wang,Qikui Man,Shiqi Zhu,Zhenkuang Lei,Guoguo Tan,Hongtao Guan
It’s a hurry to introduce a lightweight and high-efficiency microwave absorption material that is easy to synthesize, since the electromagnetic interference pollution is getting increasingly serious. Carbon-based microwave absorption material based on bimetallic metal-organic frameworks (MOFs) gets high conductivity and good magnetism at the same time, and thus can be regarded as an efficient microwave absorber with lightweight. Herein, we introduce an easy method to compose bimetallic carbon-based microwave absorbers based on ZIF-67. By changing the proportion of Fe 3+ and Co 2+ , not only the magnetism of the material can be adjusted, the amount of carbon nanotubes (CNTs) and so as the dielectric property of the material can also be regulated. The method of introducing precursors at room temperature and then calcinating at an Ar atmosphere is simple to repeat and appropriate for mass production. When the dosage molar ratio of Co 2+ : Fe 3+ is 3: 2, the minimum reflection loss ( RL min ) can reach − 24.83 dB while the effective absorption bandwidth (EAB) can reach 5.14 GHz when the thickness is 1.7 mm, under a 30 wt% filling loading. We believe that this work can provide a reliable method to introduce carbon-based microwave absorption material based on bimetallic MOF materials.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2023
·
IF 7
Fuwang Zhao,Yanling Yang,Siyang Ji,Rui Yu,Xing Li,Zhiwei Zhou
A photo-Fenton catalyst Fe‑carbon nitride (g-C3N4)/reduced graphene oxide (rGO) (labeled as FNGO) was prepared via two-step calcination thermal polymerization. rGO as a carrier of Fe-g-C3N4 accelerated the charge transfer and improved the reduction of Fe (III) as compared those of the binary Fe-g-C3N4 catalyst. The FNGO catalyst maintained a high surface area of 264.7 m2/g and its charge transfer rate was 2.77 times higher than Fe-g-C3N4. The decreasing transient photocurrent and increasing electrode resistance of FNGO, Fe-g-C3N4 and g-C3N4 confirm the positive synergistic effect of Fe N coordination and rGO in charge transfer. Under the synergistic of visible light irradiation and H2O2, the excellent degradation performance of FNGO towards rhodamine B was achieved (95.3 % removal) at Fe-doping content of 10 wt%, rGO loading content of 0.5 % and H2O2 addition of 1.5 mM. Hydroxyl radicals played a dominant role in the photocatalysis-Fenton system, which was related to the coordination of Fe N, the carrier off-domain of rGO, and the Fe (III)/Fe (II) cycle promoted by photogenerated electron and superoxide radicals. The FNGO had a high stability, a wide pH adaptation (3– 11) and a low Fe-leaching. This novel ternary light-driven photo-Fenton catalyst of FNGO enabled efficient decontamination during advanced treatment of wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2023
·
IF 6.4
Xinyue Mao,Qingnan Meng,Mu Yuan,Sifan Wang,Shiyin Huang,Baochang Liu
The weak interfacial strength between Fe-based matrix and diamonds causes diamond particles to fall off prematurely, significantly affecting the cutting efficiency of diamond composites. This work aimed to optimize the interfacial microstructure and mechanical properties of the diamond/Fe-Ni-WC composites by coating a Mo 2 C layer on the diamond particles. The Mo 2 C-coated diamonds were prepared via the molten salt method. Diamond/Fe-Ni-WC composites were sintered by the hot-pressing process under a vacuum. The bending strength of composites with Mo 2 C-coated diamonds was improved from 804 to 996 MPa with the increased coating time. The energy dispersive spectroscopy scanning indicated that the Mo 2 C coating layer changed the interfacial composition between the matrix and the diamonds from Fe–C alloy to Mo 2 C, improving the interface strength. Moreover, the diamond protrusion heights of composites were raised by adding a Mo 2 C interface, resulting in an improvement in the cutting efficiency of impregnated diamond tools.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Liang Zhang,Bofan Zhang,Yunxia Liu,Zinan Wang,Jafar Hussain Shah,Rile Ge,Wenhui Zhou,Shiro Kubuki,Junhu Wang
The radical-based Fenton-like reaction quenching by various inorganic anions or high concentration of organic matters restrict the practical value in future industrial application. Contrarily, the nonradical-dominated system could efficiently overcome above limitations and achieve excellent catalytic capacity under a wide category of water matrixes. Herein, a series of Zn-Fe double oxides were successfully fabricated via calcination of Zn 1-x Fe x -Fe Prussian blue analogues under ambient atmosphere. Under the coexistence of visible light and peroxymonosulfate (PMS), Zn-Fe double oxides manifested excellent catalytic performance towards various organic pollutants oxidation with trace amount of iron leaching, and even showed superior contaminant decomposition efficiency under high concentration of organic matter and practical aqueous system. Confirmed by radical trapping experiment and electron paramagnetic resonance spectroscopy, the photo-induced electrons and holes can act as triggers to PMS activation and thereby transform reaction routes from radicals to singlet oxygen ( 1 O 2 )-dominated nonradical pathway over the prepared Zn-Fe double oxides. This work provided new insights and comprehension into modulating radical and nonradical pathways of PMS-based advanced oxidation process for refractory contaminant oxidation via utilizing solar energy.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Chengyan Wen,Ke Jin,Luying Lu,Qian Jiang,Jingcheng Wu,Xiuzheng Zhuang,Xinghua Zhang,Lungang Chen,Chenguang Wang,Longlong Ma
Direct conversion of syngas into aromatics (STA) on the tandem catalyst containing Fischer-Tropsch (F-T) synthesis catalysts and acid zeolites, especially Fe-based catalysts and ZSM-5, has been attracting significant attention due to the higher cost efficiency. Even though promoters have frequently been added into the Fe-based part to improve the performance of STA reaction, its motivating mechanism is still unclear in the tandem catalyst system. Herein, the influence of the Cu promoter was evaluated for the catalytic activity of Fe-based/zeolite tandem catalysts in the STA process. Moreover, the working mechanism of the Cu promoter had been systematically investigated by adding different copper amounts and deliberately designed experiments. It was demonstrated that the addition of copper could improve aromatic selectivity because the Cu promoter could facilitate CO to participate in the conversion of olefins into aromatics over the tandem catalyst. In addition, the Cu promoter doped into the Fe-based catalyst drastically suppressed methane formation and enhanced the stability of the catalyst in the STA reaction. These findings provide insights into the effect of the Cu promoter on producing aromatics from syngas over the Fe-based/zeolite tandem catalyst system.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
He Zhang,Jun-Ru Liu,Guo-Hua Zhang
In this paper, excellent performance W-Cu-Ni-Fe alloys with the addition of Ni and Fe (total content: 5 wt%) were successfully prepared by low temperature liquid-phase sintering, using the raw material of ultrafine W-Cu-Ni-Fe composite powder. Ultrafine W-Cu-Ni-Fe composite powder with high sintering activity and uniform composition distribution was prepared by a two-stage reduction method consisting of carbothermal reaction and hydrogen deep deoxidation. Additions of Ni and Fe not only improved the wettability between W and Cu two phases, but also improved the bonding strength of two-phase interface. All sintered samples had higher relatively densities to ensure that the samples have great comprehensive properties. When Ni and Fe were co-added in appropriate proportions, the highest tensile strength and elongation of W-Cu-Ni-Fe alloy samples were 497 MPa and 9.12 % for the composition: W-3.5 wt%Ni-1.5 wt%Fe-25 wt%Cu, respectively. Meanwhile, with increasing Ni content from 0 wt% to 5 wt%, the compressive strength and failure strain of alloy samples increased from 1160 MPa to 2376 MPa and from 53 % to 98 %, respectively. In addition, with the enhancement of the solid solution strengthening effects of Ni and Fe on Cu matrix, the bending strength and microhardness of the alloy samples increased to 1174 MPa and 361 HV for composition: W-3.5 wt%Ni-1.5 wt%Fe-25 wt%Cu, respectively. Although the additions of Ni and Fe made the Cu matrix network structure have a uniform distribution, it led to a decrease in the electron transfer ability of the alloy, and thus, there was a decrease in electrical conductivity .
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Katam Srinivas,Fei Ma,Yanfang Liu,Ziheng Zhang,Yu Wu,Yuanfu Chen
It is crucial but challenging to promote sluggish kinetics of oxygen evolution reaction (OER) for water splitting via finely tuning the hierarchical nanoarchitecture and electronic structure of the catalyst. To address such issues, herein we present iron-doped Ni3Se4/NiSe2 heterostructure-embedded metal–organic framework-derived mesoporous tubes (Ni-MOF-Fe-Se-400) realized by an interfacial engineering strategy. Due to the hierarchical nanoarchitecture of conductive two-dimensional nanosheet-constructed MOF-derived mesoporous tubes, coupled with fine tuning of the electronic structure via Fe-doping and interactions between Ni3Se4/NiSe2 heterostructures, the Ni-MOF-Fe-Se-400 catalyst delivers superior OER activity: it requires only a low overpotential of 242 mV to achieve 10 mA cm–2 (Ej=10), surpassing the benchmark RuO2 (Ej=10 = 286 mV) and displays exceptional durability in the chronoamperometric i–t test with a small current decay (6.2%) after 72 h. Furthermore, the water splitting system comprises a Ni-MOF-Fe-Se-400 anode and a Pt/C cathode requires a low cell voltage of 1.576 V to achieve Ej=10 with an excellent Faradic efficiency (∼100%), outperforming the RuO2–Pt/C combination. This work presents a novel interfacial engineering strategy to finely adjust the morphology and electronic structure of the non-noble metal-based OER catalyst via a facile fabrication method.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Weiwei Li,Wenlan Ji,Murat Yılmaz,Tian C. Zhang,Shaojun Yuan
Arsenic is a toxic carcinogen, and arsenic pollution in groundwater is one of the most serious environmental problems in the world. Thus, it is an urgent problem to efficient removal of arsenic from groundwater. In this work, a novel MWCNTs/MIL-53(Fe) nanocomposite was successfully synthesized to improve the water stability of MIL-53(Fe) by incorporation of carboxylated multi-walled carbon nanotubes (MWCNTs) using a one-pot hydrothermal method, and was then used to efficiently adsorb As(V) ions from groundwater. Adsorption experimental results demonstrated an ultrafast adsorption rate of As(V) on the MWCNTs/MIL-53(Fe) nanocomposites in solution pH values of 3 to 10, and the adsorption equilibrium could be reached in circa 20 min with an adsorption capacity of 27.24 mg·g −1 in a low As(V) concentration of 10 mg·L −1 . The adsorption kinetics of As(V) on the MWCNTs/MIL-53(Fe) was found in line with the pseudo-second-order (PSO) kinetic model, and was simultaneously controlled by both internal diffusion and liquid film diffusion. The adsorption isotherm data conformed to the Redlich-Peterson isotherm model, indicating both physical and chemical adsorption occurred at heterogeneous interfaces. Moreover, the postulated adsorption mechanism of As(V) on MWCNTs/MIL-53(Fe) nanocomposites was ascribed to hydrogen-bond interaction, electrostatic attraction and chemical complexation. Therefore, the as-prepared MWCNTs/MIL-53(Fe) nanocomposites not only exhibit superior water stability and outstanding adsorption performance in removing arsenic-contaminated groundwater, but also offer a novel insight for rational preparation of water-stable MOF-based composites.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2022
·Vol. 39
·期 2
·219-223
·
IF 2.726
Xiao Long,Wu Huirong,Zhang Yong,Sun Hao,Zhang Wenchao,Lyu Fenglei,Deng Zhao,Peng Yang
O xygen evolution reaction(OER) plays a key role in the electrochemical conversion and storage processes, but the sluggish kinetics of OER strongly impedes its large-scale applications. We herein reported the in situ growth of Fe-benzenedicarboxylate(Fe-BDC) on Co(OH) 2 nanoplates[Fe-BDC/Co(OH) 2 ] that showed remarkably enhanced OER activity than the pristine Co(OH) 2 . The incorporation of Fe species could enhance the intrinsic OER activity of Co and BDC could increase the electrochemically active surface area(ECSA), thus resulting in dramatically enhanced OER activity. In situ Raman spectroscopy characterization disclosed that Fe-CoOOH reconstructed from Fe-BDC/Co(OH) 2 was the real active site for OER. This work highlights the significance of rational tailoring of the nanostructure and electronic structure of Co(OH) 2 and provides more opportunities for its widespread applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2022
·
IF 10.319
Rui Wang,Zihan Meng,Xuemin Yan,Tian Tian,Ming Lei,Rami Adel Pashameah,Hala M. Abo-Dief,Hassan Algadi,Nina Huang,Zhanhu Guo,Haolin Tang
Pyrolysis-acquired iron and nitrogen codoped carbon (Fe-N-C) has been comprehensively investigated for its promising oxygen reduction reaction (ORR) catalytic performance and structural complexity. The modification of non-metal elements with larger atomic radius and the corresponding intrinsic microstructure-property relations are rarely reported. In this study, tellurium (Te) intervened Fe-N-C was prepared by micelles-induced polymerization with Te nanowires as an in-situ intervening agent. The out-plane bonding of Te with Fe induced the increase of both N content and proportion of pyridinic N on the material surface, thus improving the ORR catalytic performance. The assembled Zn-air battery demonstrated a maximum power density of 250 mW/cm 2 and excellent rate capability under various discharge current densities, which was much better than the Pt/C. Overall, the current work demonstrates a novel Te/Fe-N-C material and reveals an original Te intervened Fe-N-C strategy and N reconfiguration mechanism, which is of great significance for the design of key materials in energy-related fields.
✓ 已验证
产品关联
DOI
高影响因子