MATERIALS SCIENCE FORUM
·
2020
·
IF 0
Hong Qian Dai,Yuan Lu,Zhi Hin Ou,Min Xu
Fe3O4-APTES-CS2 was prepared by modification of Fe3O4 with 3-aminopropyltriethoxysilane (APTES) and carbon disulfide (CS2). Lipase was covalently bonded to Fe3O4-APTES-CS2 to obtain the immobilized lipase Fe3O4-APTES-CS2-lipase. The textural characteristic of Fe3O4-APTES-CS2-lipase was assessed by scanning electron microscopy. The optimal immobilization conditions were 2.5 mg/mL lipase, pH 7.0, 35 °C, 3 h. The loading amount of lipase was 119.0 mg/g carrier. The immobilization efficiency reached 57%. (R)-(+)-N-acetyl-1-methyl-3-amphetamine was synthesized by Fe3O4-APTES-CS2-Li- pase. The conversion, enantiomeric excess of (R)-(+)-N-acetyl-1-methyl-3-amphet-a- mine and E value reached 36.8%, 98.5% and 132, respectivel.
研究领域:
化学
·
生物化学
·
材料科学
·
催化
✓ 已验证
DOI
ZEITSCHRIFT FUR KRISTALLOGRAPHIE-NEW CRYSTAL STRUCTURES
·
2023
·Vol. 238
·期 6
·1069-1070
·
IF 0.3
Yan-Qing Wang,Wen-Qing Yan,Li-Xue Nie,Ping-Ping Luan,Chao-Qun Li
C 20 H 22 Cu 3 N 8 O 10 , monoclinic, C 2/ c (no. 15), a = 12.0766(11) Å, b = 16.2778(14) Å, c = 14.7605(13) Å, β = 97.8580(10) ∘ , V = 2874.4(4) Å 3 , Z = 4, R
gt ( F ) = 0.0420, wR
ref ( F
2 ) = 0.0988, T = 298.15 K.
研究领域:
无机化学
·
晶体学
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLUTION CHEMISTRY
·
2022
·Vol. 52
·期 1
·91-104
·
IF 2
Yu Yingmin,Yi Lingxiao,Wei Jiajun,Guo Hongyue,Li Min
The liquid–liquid equilibrium (LLE) data for ethylene glycol + 2-ethyl-1-hexanol + { n -hexane, 1-hexene, 2-propyl-1-heptanol, and isopropyl ether} were measured at 298.2 K under 101.3 kPa. The distribution constant ( D ) and selectivity ( S ) of 2-ethyl-1-hexanol in the systems were calculated to analyze the extraction ability of the four extractants. The Bachman and Othmer–Tobias equations were chosen to examine the experimental LLE data. The linear correlation coefficient R 2 is greater than 0.98, indicating that the linear fitting of the experimental data is good. The data were regressed by thermodynamic models NRTL and UNIQUAC. The deviation between experimental data and simulated data was calculated by the root mean square deviation (RMSD) and the absolute average deviation (AAD). The RMSD is less than 0.79% and the AAD is less than 0.46%. It indicates that the two models are suitable for the regression of the system.
研究领域:
化学工程
·
热力学
✓ 已验证
DOI
高影响因子
FARADAY DISCUSSIONS
·
2016
·Vol. 190
·219-230
·
IF 3.544
Yong-Qi Li,Huan Liu,Peng Wang,Da Yang,Xiao-Li Zhao,Ye Liu
A highly efficient and stable Rh–P catalytic system in the RTIL of [PEmim]BF4 was developed for the biphasic hydroformylation of 1-octene by using the diphosphine-functionalized ionic liquid (FIL) of 2. While 2-Rh(acac)(CO)2 was immobilized in [PEmim]BF4 (solvent), a typical biphasic catalysis was fulfilled with advantages of facile separation and recycling ability – 9 runs without any loss of activity. It was found that not only the acquired π-acceptor character of 2, but also the synergetic role of the piperidyl group in [PEmim]BF4 as an N-containing donor, cooperatively contributed to the efficient hydroformylation due to the facilitated formation and stability of the Rh-H active species (ν 2045 cm−1). This was supported by the in situ high-pressure FT-IR spectral analysis.
研究领域:
化学工程
·
催化科学
✓ 已验证
DOI
PubMed
高影响因子
Materials Research Express
·
2020
·Vol. 6
·期 12
·125376
·
IF 1.929
Sainan Wu,Pan Zhang,Zhilong Xu,Zhang Chen,Yanfeng Gao
A series of microencapsulated phase change materials (microPCMs) are synthesized by encapsulating 1-dodecanol into cellulose nanofibers (CNFs) modified melamine-formaldehyde (MF) resin through in situ polymerization. The chemical structure and crystallography of the microcapsules are characterized by Fourier-transform infrared spectroscopy (FT-IR) and x-ray diffraction (XRD). Scanning electronic microscopy (SEM) images show that the obtained microcapsules are regularly spherical with smooth surface and an average diameter about 1∼3 μm. The cracking ratio test indicates that the addition of CNFs largely enhances the mechanical strength of the microcapsules, and the CNFs/MF-microPCMs (with 3.4 wt% CNFs) have a phase change enthalpy of 100.4 J g−1. Furthermore, the simulation result demonstrates that the indoor temperature modulation ability of CNFs/MF-microPCMs model house is 4.2 °C, which is more than that of model house without microPCMs under room temperature. These results indicate that CNFs/MF-microPCMs are potential candidates for thermoregulating applications.
研究领域:
材料科学
·
能源工程
✓ 已验证
DOI
高影响因子
JOURNAL OF CHEMICAL SCIENCES
·
2024
·Vol. 136
·期 3
·1-11
·
IF 1.7
Zhao Zhicai
A series of 1-carbonyl-1 H -indoles were prepared by 2-iodoanilines and calcium carbide in a one-pot reaction catalyzed by recyclable10% Pb/C, resulting in the corresponding substituted indoles in good yields. This protocol offers several advantages, including the utilization of sustainable, low-cost calcium carbide, an easy-to-handle acetylene source, and recyclable Pb/C catalysts. Graphic abstract The synthesis of a series of 1-carbonyl-1 H -indoles were prepared by 2-iodoanilines and calcium carbide in a one-pot reaction catalyzed by 10% Pb/C, resulting in the corresponding substituted indoles in good yields. This protocol offers several advantages, including the utilization of sustainable, low-cost feedstock, an easy-to-handle acetylene source, and recyclable Pb/C catalysts.
研究领域:
有机化学
·
绿色化学
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2024
·
IF 4.1
Haoqing Tang,Yulan Wang,Xiaohuan Liu,Tian Tian,Qiang Weng,Xiaotong Liu,Tao Liu
Rational design and preparation of titanium-based anode materials with superior fast charge and discharge are a key focuses of the lithium-ion batteries research. Herein, a novel and facile synthesis of uniformly carbon-coated Li 2 CuTi 3 O 8 (LCuTO) nanoparticles with excellent high-rate lithium storage properties is presented using HKUST-1 with pore structure and active metal sites as a copper source. The well-designed LCuTO@HKUST with carbon bridges between the particles and the carbon layer on the outer surface offers high electronic conductivity for fast charge and discharge. The LCuTO@HKUST exhibits extraordinary lithium storage performance: high capacity (251.8 mAh/g after 1000 cycles at a current density of 1.0 A/g), a superior high-rate capability (160.3 mAh/g after 500 cycles at 3.0 A/g and 138.1 mAh/g after 500 cycles at 5.0 A/g), and excellent cycle reversibility and cycle stability under various current densities. In addition, the lower Li + migration barrier in LCuTO@HKUST demonstrated by density functional theory (DFT) calculations is beneficial to the long-cycle stability and high-rate performance. The proposed preparation method and the strategy of using the MOF as a metal source for lithium-ion battery anode materials provide a new approach for advanced fast charge–discharge energy storage applications.
研究领域:
材料科学
·
能源存储
✓ 已验证
DOI
高影响因子
JOM
·
2020
·Vol. 72
·期 11
·3806-3811
·
IF 2.054
Li Min,Li Ying
In this work, we report an electrochemical route to directly reduce solid lead oxide (PbO) to lead in an acetamide-1-methylimidazolium trifluoromethylsulfonate (acetamide-MIMTfO) low-temperature molten salt. A cyclic voltammogram recorded using a graphite cavity electrode filled with PbO powder reveals that solid PbO can be directly electrochemically reduced to lead. Constant voltage electrolysis experiments with a PbO pellet cathode and a high-purity graphite anode were performed under different constant voltages (2.2–2.8 V) and at 343 K for different durations (2–6 h). XRD patterns of the electrolysis products confirm that the PbO pellet can be thoroughly reduced to lead after 6 h electrolysis. The present electrochemical route and acetamide-MIMTfO low-temperature molten salt can be used for extracting metals from their oxides at room temperature.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
JOURNAL OF HETEROCYCLIC CHEMISTRY
·
2023
·
IF 2.4
Ping Zhao,Qingle Zeng
We have developed a diversity-oriented, substrate-controlled, chemoselective synthetic method for a variety of structurally diverse 1-sulfonylquinazoline-2,4(1H,3H)-diones and 2-sulfonamidobenzonitriles. This substrate-controlled synthesis is accomplished through the condensation reaction of 2-(sulfonamido)benzamides with or without an N-methyl group on the amides. The reactions are fulfilled within half an hour at room temperature with solid triphosgene as a convenient condensing agent and pyridine as an acid acceptor. This protocol features easily available starting materials, mild reaction conditions, easy experimental operation, and moderate to excellent yields of products.
研究领域:
有机化学
·
药物化学
✓ 已验证
DOI
高影响因子
Current Research in Food Science
·
2022
·
IF 6.269
Kwame Eduam Baiden Frempong,Yan Chen,Lili Liang,Xiaoyan Lin
During post-harvest storage, the cell wall properties are closely associated with the physical, chemical, and biological properties of the fruit. The degradation of pectin in the cell walls and middle lamella is critical to these properties. The effects of calcium chloride (CaCl₂) and 1-methylcyclopropene (1-MCP) combined treatment on the pectin degradation, texture, and peel color of Eureka lemon were investigated during post-harvest storage. The in-situ light microscope analysis, rapid method, and FTIR test were used to investigate the spatial distribution, the pectin content, and its degradation. The results showed a reduction in pectin degradation, by 42 d the CaCl₂ and 1-MCP combined treated fruits presented a 36.7% pectin content loss which was lower than the control which was 48.3%. The treated fruits significantly exhibited enhanced textural properties, delayed weight loss, higher total acids, and improvement of other physicochemical properties in comparison to the control. The treatment deaccelerated the fruit peel color change from green to yellow and also had a better visual appearance on the final day. Overall, the results suggest that the control treatment for pectin degradation can reduce the fruit texture decline and peel color change and maintain a good visual appearance. The influence of pectin degradation on the texture and physicochemical properties of lemon provides a theoretical basis for fruit storage optimization, quality control, and shelf-life extension.
研究领域:
食品科学
·
植物生理学
✓ 已验证
DOI
PubMed
高影响因子
BIORESOURCE TECHNOLOGY
·
2017
·
IF 5.651
Bai-ren Yang,Zhu-qiu Sun,Li-ping Wang,Zhao-xia Li,Cheng Ding
A strain, Brevibacillus agri DH-1, isolated from dry lands was used to remove m -dichlorobenzene. After 48 h culturing, the concentrations of m -dichlorobenzene decreased from 26–130 to 7.87–28.87 mg/L and dry cell weight for bacterial growth reached 52.43–75.05 mg/L. The growth and degradation kinetics were analyzed by the fitting of Haldane-Andrews model and pseudo first-order model. A degradation pathway was proposed according to major intermediates (phenol), chloride ion variation, ring-opening enzyme activity, and high mineralization (0.47 g Cl- /g m -dichlorobenzene , 0.65 g co2 /g m -dichlorobenzene , 0.15 g DCW /g m -dichlorobenzene ). In addition, the performance in a biotrickling filter (BTF) was evaluated through removal efficiency and pressure drop values with increasing inlet loading rate from 4.10 to 122.57 g/m 3 /h at three empty bed residence time points (30 s, 60 s, and 90 s). The results demonstrated that strain DH-1 possessed high removal efficiency and stable operation in a BTF.
研究领域:
环境生物学
·
微生物学
·
污染控制技术
✓ 已验证
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2022
·
IF 5.304
Dan Zhao,Xianfa Zhang,Wenjing Wang,Lili Sui,Xiaojing Bai,Haixiang Song,Chuanyu Guo,Yingming Xu,Xiaoli Cheng,Shan Gao,Lihua Huo
Early and painless detection of type-I diabetic patients by detecting acetone concentration in their exhaled breath would be a rapid and effective means. TiO 2 materials with exposed active (0 0 1) facet were synthesized mostly with HF as raw material, and the particle size was relatively large. In this work, (0 0 1) and (1 0 1) facets co-doped TiO 2 nanocubes with particle size < 50 nm were successfully prepared by a simple one-step hydrothermal process assisted by the ionic liquid ([Bmim][BF 4 ]) as the fluorine source and morphology modifier. Due to the exposure of the active (0 0 1) facets, the sensor exhibited good gas response to acetone gas at a low operating working temperature (OWT) of 170 °C with a detection limit as low as 30 ppb and a response time of only 2.2 s for 100 ppm acetone gas, and also relatively excellent selectivity, reproducibility, moisture resistance and long-term stability. It is worthy to point that, the changes of acetone concentration were compared in exhaled gas from healthy people and type-I diabetic patients, and the responses to exhaled gas of type-I diabetic patients were also tracked at different time in the same day. This provides significant convenience for early and painless diagnosis of type-I diabetic patients.
研究领域:
材料科学
·
医学
·
传感器技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）