TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
·
2023
·
IF 4.5
Hao LEI,Yan LI,Meng-wei GUO,Qi-bo ZHANG
Smooth Ag substrate achieved in-situ conversion to form nanoporous architecture that is assembled by highly dispersed nanoparticles (NPs) with a mean size of 21.88 nm by applying a redox potential signal in an alkaline solution with an appropriate pH range. The detailed phase constitution and microstructure evolution process of the Ag substrate induced by the electrochemical redox tuning approach were systemically investigated. Under the action of controllable redox potentials, the smooth Ag substrate is firstly electrochemically oxidized to form Ag 2 O with an expansion on the unit volume, followed by electrochemical reduction back to metallic Ag, causing the cell volume to shrink. The expansion and contraction of the unit volume during the highly reversible electrochemical process lead to in-situ formation of the highly porous Ag architectures. The fabricated Ag NPs-packed electrode exhibits as an excellent surface-enhanced Raman scattering (SERS) performance, and the measured Raman spectrum of Rhodamine 6G (R6G) reaches a detection limit of 5.44×10 −10 mol/L.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Qinghan Chen,Li Wang,Dehui He,Bo Xiao,Xia Ran,Rong Li,Hong Xu,Jian Feng
A novel [email protected] 5 O 7 I/Bi(OH) 3 (AB) heterojunction was prepared and the enhanced photocatalytic antibacterial activity against Escherichia coli ( E. coli ) under visible light excitation was exhibited. 3 %AB (containing 3 wt% of Ag) presented best photocatalytic performance, and all of E. coli cells were inactivated within 5 min under natural solar light irradiation. The photocatalytic antibacterial mechanism of AB heterojunction was corroborated by SEM, live/dead cell staining and SDS-PAGE assay. The destruction of the cell membrane, the leakage of the intracellular protein and the decomposition of the protein were considered as the events occurred in the antibacterial process. The radical capture experiment confirmed that •O 2 – and e – played the dominant role in the destruction of the cell membrane and the decomposition of the protein. The improvement of the photocatalytic activity can be mainly ascribe to the construction of heterojunction, SPR effect resulted from Ag deposition, enhanced visible light absorption and more surface oxygen vacancies. These factors are advantageous to the generation of the photogenerated electrons and holes, and improve the spatial separation efficiency of the photogenerated charge. This study presented a promising [email protected] 5 O 7 I/Bi(OH) 3 heterojunction as the photocatalyst for the potential application in the treatment of the bacterial contamination.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2023
·
IF 17.1
Aixin Deng,En Zhao,Qi Li,Yue Sun,Yazi Liu,Shaogui Yang,Huan He,Yan Xu,Wei Zhao,Haiou Song,Zhe Xu,Zupeng Chen
Photocatalytic reduction of CO2 to value-added solar fuels is of great significance to alleviate the severe environmental and energy crisis. Herein, we report the construction of a synergistic silver nanoparticle catalyst with adjacent atomic cobalt–silver dual-metal sites on P-doped carbon nitride (Co1Ag(1+n)–PCN) for photocatalytic CO2 reduction. The optimized photocatalyst achieves a high CO formation rate of 46.82 μmol gcat–1 with 70.1% selectivity in solid–liquid mode without sacrificial agents, which is 2.68 and 2.18-fold compared to that of exclusive silver single-atom (Ag1–CN) and cobalt–silver dual-metal site (Co1Ag1–PCN) photocatalysts, respectively. The closely integrated in situ experiments and density functional theory calculations unravel that the electronic metal–support interactions (EMSIs) of Ag nanoparticles with adjacent Ag–N2C2 and Co–N6–P single-atom sites promote the adsorption of CO2* and COOH* intermediates to form CO and CH4, as well as boost the enrichment and transfer of photoexcited electrons. Moreover, the atomically dispersed dual-metal Co–Ag SA sites serve as the fast-electron-transfer channel while Ag nanoparticles act as the electron acceptor to enrich and separate more photogenerated electrons. This work provides a general platform to delicately design high-performance synergistic catalysts for highly efficient solar energy conversion.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Xiaoqi Liu,Yanyun Zhang,Yan Liu,Ting'an Zhang
Chitosan bead grafted by third-generation dendrimers (CB-G3) with a diameter of 1.40 mm was synthesized to investigate their performance in recovering Ag(I), Cu(II), and Pb(II) ions in aqueous media. The prepared adsorbents were characterized by XRD, FT-IR, elemental analysis, TGA , and SEM, and the effects of pH, contact time, concentration, and temperature were examined. The results showed that the adsorbents were successfully fabricated. The optimum pH value was 5, and the increased generation number contributed to adsorption capacity improvement, indicating that electrostatic interactions between amine groups and metal ions are the governing mechanism of adsorption by the CB-G3. The kinetics, isotherms, and thermodynamics of Ag(I), Cu(II), and Pb(II) adsorption onto the CB-G3 were investigated. The adsorption processes can be described using pseudo-second-order kinetic and Langmuir models. The maximum monolayer adsorption capacities were 105.62, 88.82, and 97.87 mg·g −1 for Ag(I), Cu(II), and Pb(II) at 30 °C within 210 min, respectively. Electrostatic interactions and hydrogen bonds are the main mechanisms between metal ions and N atoms. Therefore, the CB-G3 is a promising candidate for Ag(I), Cu(II), and Pb(II) adsorption owing to its splendid ability in easy separation, good adsorptivity, and reusability for efficiently adsorbing Ag(I), Cu(II), and Pb(II) ions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD AND AGRICULTURAL IMMUNOLOGY
·
2022
·
IF 3.268
Peizhen Li,Xiuhua Xia,Jiannan Chen,Hang Yu,Yunfei Xie,Yahui Guo,Weirong Yao,He Qian,Yuliang Cheng
Gold-coated silver core–shell nanoparticles (Ag@Au NPs) have been widely used for SERS analysis due to plasmon resonance performances. However, it is a great challenge to fabricate Ag@Au core–shell structures with specified morphology. In this paper, the size and shape of Ag NPs (core) were precisely controlled by a seed-mediated approach, and then the gold shell was completely coated on under the strong reduction of ascorbic acid, resulting in Ag@Au NPs with highly regulated morphology. The obtained Ag@Au NPs achieved a similar or even better SERS enhancement factor (EF) (up to 5.7 × 107) compared to Ag NPs, but significantly higher stability. For the rapid SERS detection of nitrofurantoin metabolite AHD, a limit of detection (LOD) as low as 1 × 10−10 M and a wide linear range from 1 × 10−4 to 1 × 10−8 M were obtained. Furthermore, recoveries for crayfish samples were from 90.5% to 108%, indicating a good performance of the presented method in real sample detection.
✓ 已验证
产品关联
DOI
高影响因子
SmartMat
·
2023
·Vol. 4
·期 6
·e1178
·
IF 20.4
Ben Niu,Su Yang,Yiyi Yang,Tao Hua
Recently the ever-increasing demand for wearable electronics has greatly triggered the development of flexible strain sensors. However, it is still challenging to simultaneously achieve high sensitivity, wide working range, and good wearability. Herein, we developed a highly stretchable fiber strain sensor based on wet-spun porous polyurethane (PU) fiber, and especially a unique conductive network of dual silver (Ag)/carbon black (CB) layers is constructed. Under strain, the rapid crack propagation on the brittle Ag layer brings a large resistance change and thus high sensitivity, while the tunneling-effect dominated CB layer bridges the separated Ag islands to maintain the integrity of conductive pathways under large strain. By means of the synergistic effect of Ag/CB layers, this composite fiber of Ag/CB@PU presents not only high conductivity of 5139.9 S/m, but also ultrahigh sensitivity with a gauge factor of 2.52 × 10 6 and a wide working range of up to 200%. Besides that, it is also capable of detecting very tiny strain of 0.1% and working stably for over 8000 cycles. Using mature weaving technology, this fiber strain sensor can be seamlessly integrated into the textile to conformally track different movements of the human body. Together with the facile all-solution-based fabrication protocol, this work proposed a new strategy to prepare high-performance fiber strain sensor, promising the textile-based wearable applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Sciences
·
2023
·
IF 6.9
Ze Wang,Zhi Huang,Jiang Yu,Xiao Shao,Weidong Peng,Jie Yu,Yinying Jiang
Formaldehyde is a pollutant that significantly affects the indoor air quality. However, conventional remediation approaches can be challenging to deal with low-concentration formaldehyde in an indoor environment . In this study, Photocatalysts of Ag/graphitic carbon nitride (g-C 3 N 4 )/Ni with 3D reticulated coral structure were prepared by thermal polymerization and liquid phase photo-deposition, using nickel foam (NF) as the carrier. Experiments demonstrated that when the Ag concentration was 3%, and the relative humidity was 60%, the Ni/Ag/g-C 3 N 4 showed the maximum degradation rate of formaldehyde at 90.19% under visible light irradiation, and the formaldehyde concentration after degradation was lower than the Hygienic standard stated by the Chinese Government. The porous structure of Ni/Ag/g-C 3 N 4 and the formation of Schottky junctions promoted the Adsorption efficiency and degradation of formaldehyde, while the nickel foam carrier effectively promoted the desorption of degradation products . Meanwhile, the degradation rate was only reduced by 3.4% after 16 recycles, the three-dimensional porous structure extended the lifetime of the photocatalyst. This study provides a new strategy for the degradation of indoor formaldehyde at low concentrations.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2023
·
IF 10.9
Yu Zhang,Qiang Gao,Xianzhe Sheng,Shuai Zhang,Junjie Chen,Yan Ma,Jianbin Qin,Yongsheng Zhao,Xuetao Shi,Guangcheng Zhang
The design and fabrication of electromagnetic interference shielding films with a novel structure to eliminate undesirable electromagnetic pollution is an important research direction. However, it is still a challenge to combine and organize nanofillers in different dimensions into the structured network in polymer-based electromagnetic interference (EMI) shielding composites. In this work, a sandwich structure polyimide (PI) composite film with alternative 2D-MXene network and 1D-Silver nanowires (Ag NWs) network was prepared through the “electrospinning-immersion-hot pressing” method. With the increase of Ag NWs content, the EMI shielding effectiveness (SE) gradually increases while maintaining good flexibility and mechanical robustness. The EMI SE and the tensile strength of 150 μm thick sandwich composite film can reach up to 79.54 dB and 39.82 MPa, respectively. The prepared flexible and robust PI composite film with a sandwich structure has high EMI SE with less metal content, which can provide guidelines for the development of high-performance EMI polymeric films with potentials in wearable devices and equipment.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Jinhao Zhang,Xin Wang,Zhiwei Yang,Jian Wang,Jiacheng Cao,Qian Chen,Shilong Yu,Jian Zhang,Tianwen Guo,Hai Li,Xiao Huang
Eutectic gallium–indium alloy (EGaIn) is a biocompatible liquid metal, promising for wearable electronics. Through functionalization and formation of composites, EGaIn-based materials have shown potential in multifunctional sensing devices. Here, egg-shell EGaIn/Ag/ZnO ternary composite particles were prepared through an ultrasound-assisted displacement reaction combined with room-temperature hydrolysis. The composite was further constructed as a wearable sensor capable of both pressure and proximity detection. For pressure sensing, due to the decrease in the Young’s modulus of the egg-shell structure and the presence of the electrical double layers between Ag and ZnO, which enriched surface charges, the sensor showed excellent sensitivity at low pressures (2.17 KPa–1, <0.4 KPa) and thus the ability to sense body movements. For proximity sensing, the composite sensor was able to detect approaching objects that were up to 20 cm away. By combining and fitting the sensing curves for both the touchless and touching modes, the extracted parameters were used to create fingerprints for different objects, demonstrating the great potential of our sensor in the differentiation and identification of unknown objects for future robotics and artificial intelligence.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
International Journal of Electrochemical Science
·
2023
·
IF 1.5
Yongfeng Liu,Jiangtao Zhang,Xiaojun Du,Yang Cao,Youyi Sun
Here, the Ag nanoparticles decorated graphene (AgNP@GNs) were fabricated by combing liquid phase exfoliation with in-situ solvent reduction method. Furthermore, the electrochemical sensitivity toward Cd 2+ and Pb 2+ ions was also investigated in detail. This AgNP@GNs presented the excellent electrical properties (2.5×10 4 S/m), meanwhile showed high electrochemical detection ability toward Cd 2+ and Pb 2+ . The sensitivity of AgNP@GNs toward Pb 2+ and Cd 2+ was ca. 15.2μA/μM (or 1246.4μA/μg L -1 ) and 0.09μA/μM (4.32μA/μg L -1 ), respectively. The AgNP@GNs was also evaluated to electrochemical detection of Cd 2+ and Pb 2+ in real water, in which the recoveries (96~124%) were obtained. The work does not only provide a facile method to synthesize AgNP@GNs with good dispersion, but also showed good electrical properties for various applications.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 29
·10231-10237
·
IF 4
Tonglei Zhang,Wanzhu Wang,Yuyao Zou,Lingnan Li,Danhua Ge,Xiaojun Chen
In this study, we have fabricated a dual-signal sensor for H2O2 determination based on 2D Cu-MOFs decorated with Ag NPs. A novel polydopamine (PDA) reduction method was utilized to reduce [Ag(NH3)2]+ to highly dispersed Ag NPs in situ without other reductive agents, and Cu-MOF@PDA-Ag was obtained. For the electrochemical sensor, the Cu-MOF@PDA-Ag modified electrode exhibits outstanding electrocatalytic properties toward H2O2 reduction with a high sensitivity of 103.7 μA mM−1 cm−2, a wide linear range from 1 μM to 35 mM and a low detection limit of 2.3 μM (S/N = 3). Moreover, the proposed sensor shows good feasibility in an orange juice sample. For the colorimetric sensor, colorless 3,3′,5,5′-tetramethylbenzidine (TMB) can be oxidized by the Cu-MOF@PDA-Ag composite in the presence of H2O2. A Cu-MOF@PDA-Ag catalysis-based colorimetric platform is further established for the quantitative analysis of H2O2 ranging from 0 to 1 mM with a lower detection limit of 0.5 nM. Importantly, such a dual-signal method for the detection of H2O2 could potentially have wide practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials
·
2023
·Vol. 16
·期 13
·4831
·
IF 3.4
Hongbo Liu,Jiajie Huang,Bingzhi Guo
Dopamine was used to modify polytetrafluoroethylene (PTFE) in order to obtain functional polydopamine (PDA) surface-modified PTFE microporous film (PTFE@PDA). Ag was deposited on the surface of PTFE@PDA using electroless plating in order to obtain Ag-wrapped PTFE@PDA film (PTFE@Ag). A liquid-phase chemical reduction method was employed to prepare nickel nanochains. A Ni@PVDF cast film was obtained by mechanically blended nickel nanochains and polyimide (PVDF). The above two films were hot pressed to give a flexible, ultra-thin, and highly effective electromagnetic shielding composite film with a “3+2” layered structure. IR, XRD, and TEM results showed the PTFE@PDA film surface was coated by a tight plating layer of Ag particles with a particle size of 100~200 nm. PTFE@Ag+Ni@PVDF composite film exhibited excellent electromagnetic shielding effectiveness, with the conductivity of 7507.5 S/cm and the shielding effectiveness of 69.03 dB in the X-band range. After a 2000-cycle bending, this value still remained at 51.90 dB. Furthermore, the composite film presented excellent tensile strength of 62.1 MPa. It has great potential for applications in flexible and wearable intelligent devices.Keywords:electromagnetic shielding;Ag;PTFE;composite film
✓ 已验证
产品关联
DOI
PubMed
高影响因子