文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2317至2328个,产品总数347,389个

切换升序
Foods · 2026 ·Vol. 15 ·期 8 ·1434 · IF 6

Impact of Glycosylated Fish Gelatin Emulsion Gels on the Gel Properties and Structural Characteristics of Surimi Gels

Huaiyuan Chen,Jiaqi Huang,Xinxin Fan,Ru Jia,Changrong Ou,Huamao Wei,Tao Huang

Surimi-based products are widely popular in the market owing to their unique texture and nutritional properties; however, traditional processing methods often result in reduced lipid content, despite lipids playing a crucial role in health. This study evaluated the effects of adding glycosylated fish gelatin emulsifying gel (prepared by glycosylating fish gelatin (FG) with D(+)-glucose (Glu) or β-cyclodextrin (β-CD) for 2 h) at 5%, 10%, and 15% (w/w) to hairtail surimi on its gel properties. The results indicated that both emulsified gels significantly enhanced gel strength, texture, and visual whiteness of hairtail surimi gel, with FG-βCD showing more pronounced improvements. FG-βCD also substantially reduced exudation and improved moisture distribution, resulting in a 69.81% decrease in juice loss. Furthermore, the addition of gelatin emulsifying gels shifted protein secondary structures toward more ordered forms, increasing α-helix and β-sheet content while reducing disordered components. Chemical interaction analysis revealed that hydrophobic interactions and nonspecific binding contributed to the reinforcement of gel formation. In conclusion, these findings highlighted that glycosylated emulsifying gels, as functional exogenous additives for surimi, offer a viable strategy for developing lipid-enriched, high-quality surimi products that meet emerging nutritional demands.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
EUROPEAN JOURNAL OF PHARMACOLOGY · 2026 · IF 5.7

A functional coupling of TRPA1 and TMEM16A channels regulates endothelium-dependent hyperpolarization-mediated vasorelaxation of mesenteric resistance arteries in healthy and septic mice

Yanan Zhang,Shaoya Rong,Shude Pang,Xiujun Fu,Yunxian Wang,Xuelu Ding,Shuai Liang,Ruihong Guo,Hui Dong

Vascular endothelial dysfunction drives sepsis progression and multi-organ failure. Although TRPA1 and TMEM16A are expressed in the vasculature, their roles in arteriolar vasorelaxation remain unclear. The vasorelaxant effects of TRPA1 and TMEM16A on the second-order branch of mesenteric resistance arteries were investigated in healthy and septic mice using a Mulvany-style wire myograph. Fluorescent Ca 2+ assays were employed to assess cytosolic Ca 2+ ([Ca 2+ ] i ) in vascular endothelial cells (VECs). A mouse sepsis model was constructed through the method of cecal ligation and puncture (CLP). Both TRPA1 and TMEM16A activation induced endothelium-dependent hyperpolarization (EDH)-mediated relaxation via functional coupling: TRPA1 triggered Ca 2+ influx and Ca 2+ -induced Ca 2+ release, amplifying TMEM16A activity. In sepsis, while ACh/EDH responses were impaired, TRPA1/TMEM16A-mediated relaxation remained intact. Channel activation improved septic mouse survival and restored ACh responses, with plasma and assay agonist concentrations in comparable ranges. This study not only elucidates the protective role of endothelial TRPA1 and TMEM16A channels against sepsis-induced vascular inflammation but also provides potential new targets for sepsis therapy.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Applied Food Research · 2026 ·Vol. 6 ·期 2 ·102406 · IF 5.4

Effects of fermentation on biochemical parameters, antioxidant capacity and flavour quality of a plant-based beverage prepared from highland barley and Potentilla anserina L

Huaying Wen,Xiaoqing Yin,Chen Zhang,Zhen Da,Yuhong Zhang

Highland barley and Potentilla anserina L. (juema) were used for the first time as substrates for fermentation with Lactiplantibacillus plantarum LL6-1 over a period of 0-9 days. Changes in physicochemical parameters, antioxidant activities and flavour profiles were systematically evaluated. Lactic acid became the predominant organic acid after fermentation, whereas total phenols, free amino acids and reducing sugars peaked on day 1. Flavonoid content and hydroxyl radical scavenging activity increased throughout the process, while SOD activity and DPPH radical scavenging capacity rose initially and then declined. Correlation analysis revealed that 16 of the 17 detected compounds were positively intercorrelated, with acetic acid as the sole exception. Fermentation markedly improved sensory characteristics: bitterness, bitter aftertaste and astringent aftertaste were significantly reduced. Electronic nose analysis clearly discriminated samples from different fermentation stages. A total of 17 new volatile compounds were identified after fermentation, and the total flavour compound content increased 3.2-to 8.2-fold compared with that before fermentation, peaking on day 2. Esters and alcohols became the dominant volatile constituents. Collectively, these findings demonstrate that LL6-1 fermentation effectively eliminates off-odours and substantially enhances the aroma quality of the beverage, indicating that this strain holds considerable promise for the development of novel plant‑based fermented beverages.

CAS / MDL: 7664-38-2 7778-77-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD RESEARCH INTERNATIONAL · 2026 · IF 8.8

Stability strategy of astaxanthin in Antarctic krill muscle: Insights from proteomics and docking simulation

Xixi Wang,Dong Su,Yating Zhang,Qinshuai Hou,Junkui Miao,Xiaofang Liu,Changfeng Qu,Kailiang Leng

Relative astaxanthin binding ability was assessed for each solubilized fraction. • Electrophoretic protein profiles of the six solubilized fractions were different. • Proteomics revealed the profile and distinction of various solubilized fractions. • Hydrogen bond and hydrophobic interactions were the main driving forces. • Astaxanthin-protein binding stability was validated by MD simulation. Astaxanthin is the most representative bioactive substance of Antarctic krill. However, the intrinsic stabilization mechanism mediated by endogenous soluble protein fractions in krill muscle has yet to be elucidated at the molecular level. In this study, the binding capacity of different solubilizing fractions to astaxanthin was significantly different ( p  < 0.05). The linear, non-saturating binding curves of fractions B, D, and F suggested a typical non-specific, multi-site surface adsorption mechanism. Electrophoretic protein profiles of the six solubilized fractions were readily distinguishable. Proteomic analysis identified potential astaxanthin-binding proteins, including hemocyanin, lipoprotein and α-actinin, with molecular weights mostly above 30 kDa. Molecular docking analysis revealed that hydrogen bond and hydrophobic interactions were the main driving forces. Molecular dynamics simulations further confirmed that hemocyanin showed good binding stability, while α-actinin had more flexible interactions. These findings offer insights into astaxanthin–protein interactions and a stabilization strategy to facilitate broader applications of carotenoids. Download: Download high-res image (138KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2026 ·Vol. 61 ·期 34 ·25602-25621 · IF 4.4

Long-term corrosion protection and self-healing behavior of epoxy coatings incorporating polyacrylamide-coated Co/Ni MOF@BTA nanoparticles

Li Han,Wang Baichen,Lu Shaowei,Li Wei

Researchers have developed a novel anticorrosion particle, denoted as CPAM@Co/Ni MOF@BTA (CMB). In this system, benzotriazole (BTA) acts as a corrosion inhibitor and is incorporated into the Co/Ni MOF framework through an in-situ host–guest nano-confinement strategy. Meanwhile, cationic polyacrylamide (CPAM) serves as cladding layer and is electrostatically assembled onto the surface of Co/Ni MOF@BTA. The composite coating was prepared by dispersing these particles into an epoxy resin matrix. In immersion tests, the coating was found to effectively enhance the corrosion resistance of Q235 steel in a sodium chloride medium, with impedance remaining as high as 2.24 × 10 5 Ω·cm 2 after 45 days of exposure. In polarization measurements, a corrosion current density as low as 5.294 × 10 –10 A/cm 2 was observed, indicating a pronounced anodic inhibition effect. In scratch tests, a distinct self-healing capability was also demonstrated. These results confirm that the incorporation of CMB particles significantly improves the passive corrosion resistance of epoxy coatings and imparts self-healing properties.

CAS / MDL: 931-36-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CONTROL · 2026 · IF 7

Influences of different decontamination methods on surface pesticide residues and quality of dried star anise

Xiangmin Kuang,Qingbo Huang,Jiapeng Wu,Sakamon Devahastin,Chaofan Guo,Yongli Jiang,Junjie Yi

Pesticide residues on dried star anise remain major barrier to product safety and quality; current washing practices unfortunately fail to balance decontamination efficiency with retention of bioactive compounds. Suitability of emerging decontamination media, in particular alkaline electrolyzed water (ALEW), for star anise has nevertheless not been assessed. The present study therefore compared use of ALEW with use of conventional methods at ambient and high-temperature conditions to decontaminate star anise; four representative fungicides were tested. Quality of dried star anise was then determined in terms of color, rehydration behavior, shikimic acid and volatile oil contents. ALEW treatment at ambient temperature provided superior pesticide reduction (9.3–14.7%) compared with other treatments; such treatment also led to enhanced rehydration capacity and color. Unexpectedly, high-temperature soaking markedly reduced effectiveness of ALEW and caused significant losses of shikimic acid and volatile oils. Machine learning modeling identified support vector regression as most accurate tool to predict influences of pH, soaking temperature and soaking time of ALEW on pesticide residues decontamination and reveals distinct parameter sensitivities among different pesticides. Short-duration, ambient ALEW treatment offers practical and quality-preserving solution for pesticide control in star anise processing, with clear implications for sustainable spice manufacturing.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROPOROUS AND MESOPOROUS MATERIALS · 2026 · IF 4.5

Synthesis of hollow coral-like Al-MCM-41-C catalysts for efficiently decarboxylation of biomass-derived γ-valerolactone to butene

Yongtai Li,Yuanting Du,Yushan Jia,Ruixi Yang,Weijun Shan,Zhenning Lou,Haibiao Yu,Ying Xiong

Hollow coral-like MCM-41-C was successfully prepared by adjust ethanol dosage. • Hollow coral-like 7wt%Al-MCM-41-C with rich weak acid site was prepared by impregnation. • Butene yield was 92.26% for 7wt%Al-MCM-41-C catalyst (300 °C, 90 min). • Due to hollow coral-like structure, 7wt%Al-MCM-41-C exhibits high catalytic stability. In this paper, the hollow coral-like ordered mesoporous MCM-41-C zeolites were synthesized by hydrothermal method, and their synthesis conditions were thoroughly investigated. Then, x wt%Al-MCM-41-C catalysts feature with hollow coral-like morphology were prepared by impregnation method, and used for the catalytic conversion of γ-valerolactone (GVL) to butene. The results showed that the introduction of Al species not only did not destroy the original special microscopic morphological structure of the MCM-41-C, but also co-existed on the surface and skeleton of the catalyst, resulting in a large number of weak acid sites. The optimal 7wt%Al-MCM-41-C catalyst has a specific surface area of 708.56 m 2  g −1 . The content of weak acid was 0.7262 mmol g −1 . At 300 °C, the GVL conversion and butene yield over the catalyst can reach 99.10% and 92.26%, respectively, within just 90 min of reaction. Meanwhile, the 7 wt%Al-MCM-41-C catalysts also demonstrated excellent catalytic cycle stability, and the butene yield remained above 90% after the 4th cycle. Download: Download high-res image (330KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Tailoring carbon fiber surface via iron phenylphosphonate nanoarchitectures for epoxy composites with enhanced fire resistance, electromagnetic shielding, and load-bearing durability

Dou Hu,Yi-liang Zou,Jing-hui Yang,Xiao-dong Qi,De-xiang Sun,Yong Wang

Iron Phenylphosphonate particles were constructed on the carbon fiber surface. • Greatly enhanced interfacial interaction was achieved in EP/CF composites. • Superior flame retardancy, EMI shielding, and mechanical strength were achieved. • The composite exhibited excellent fatigue resistance. The rapid development of the low-altitude economy has led to an increasingly strong demand for unmanned aircraft, thus requiring a large amount of advanced structural materials. However, traditional epoxy resin/carbon fiber (EP/CF) composites face issues like flammability, inadequate electromagnetic interference (EMI) shielding, and poor anti-fatigue performance, which do not meet the safety and reliability standards for advanced unmanned aerial vehicles (UAVs). To address these challenges, this work develops a multifunctional interfacial structure using Iron Phenylphosphonate (FeP) nanoparticles in the EP/CF composites. The EP/C@FeP-10 composite demonstrates significantly improved properties: achieving an EMI shielding effectiveness (SE T ) of 48.1 dB, excellent flame retardancy with UL-94 V-0 rating, accompanied by reductions in peak heat release rate (PHRR) and total smoke production (TSP) by 52.6% and 66.7%, respectively. Additionally, the FeP-modified interface creates a coupling effect that strengthens interfacial adhesion between CF and the EP matrix, resulting in the increase of 34.0% and 38.2% in tensile strength and interlaminar shear strength (ILSS), respectively. After cycle tensile durability testing, the EP/C@FeP-10 composite retains 95.2% tensile strength and 96.3% SE T retention rates, showcasing excellent anti-fatigue performance. This EP/C@FeP composite holds significant potential for applications in high-end equipment requiring lightweight construction along with high safety and reliability features. Download: Download high-res image (520KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
TALANTA · 2026 · IF 6.7

Preparation of a new porous Zn-BTC loaded with Ag dendrites by two-step electrodeposition for SERS detection of tetracycline hydrochloride

Dan Huang,Ling Li,Renjie Li,Wenxi Wang,Wenli Chen,Xiandeng Hou,Li Wu

Tetracycline hydrochloride (TCH) is a widely used antibiotic in animal husbandry and aquaculture practices, and its residual accumulation in food commodities constitutes a persistent public health concern. Therefore, sensitive, time-saving, and reliable analytical strategies for TCH are critical for guaranteeing food safety. Surface-enhanced Raman spectroscopy (SERS) has become an ideal analytical modality, attributed to its ultrahigh sensitivity, operational simplicity, and inherent molecular fingerprinting capability. The integration of plasmonic metal materials (PMPs) with the functional material provides a rational design strategy for advanced SERS substrates. A case in point is that of metal-organic frameworks (MOFs). However, the construction of MOF-PMPs composites is hindered by complex fabrication protocols, prolonged preparation time and high cost. Electrochemical deposition, characterized by rapid processing, facile parameter tuning, and environmental compatibility, presents a promising alternative for SERS substrate construction. In this work, we present a novel Ag/Zn-BTC@NF composite SERS substrate synthesized via two-step electrodeposition. The as-fabricated material delivers prominent SERS sensitivity. When R6G is used as the specific molecule, LOD (detection limit) can reach 10 −9  M, and the enhancement factor is 6.6 × 10 6 . Furthermore, the substrate achieved an LOD of 10 −8  M for TCH and enabled its ingenious detection in milk and honey samples, with recoveries of 87.4 − 112.5%. The proposed methodology establishes an efficient and eco-friendly synthetic strategy for MOF-PMPs composites, thereby broadening the scope of SERS technology in food safety applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING · 2026 · IF 5.2

Synthesis of a BiVO4/SnS2/Bi2S3 ternary heterojunction via ion exchange: Experimental and DFT study on the synergistic photocatalysis for Cr(VI) reduction and tetracycline degradation

Pengyu Zhang,Jinping Zhang,Yuan Cheng,Hongwei Wang,Minghui Tan,Yake Wang,Tong Zhang,Yunchao Mu,Joshi Mahesh Kumar,Xinli Li

In response to the rising severity of co-pollution from heavy metal ions and organic antibiotics in water, creating efficient synergistic removal technologies has become a critical research direction in environmental catalysis. In this study, a BiVO 4 /SnS 2 /Bi 2 S 3 ternary heterojunction photocatalyst with a broad spectral response was successfully constructed through a hierarchical construction strategy, using a hydrothermally synthesized BiVO 4 /SnS 2 binary heterojunction as the precursor, followed by in-situ growth of narrow-bandgap Bi 2 S 3 nanoparticles via a room-temperature ion exchange method. Characterization results from XRD, TEM and XPS confirmed that SnS 2 nanosheets and Bi 2 S 3 nanoparticles were distributed on the BiVO 4 surface, forming a tightly contacted heterojunction interface. The sequential introduction of SnS 2 and Bi 2 S 3 significantly increased the specific surface area of the material (to 14.723 m 2 /g). Optical performance tests demonstrated that the ternary heterojunction exhibited substantially enhanced visible light absorption, with the bandgap narrowing to 2.21 eV. Electrochemical tests revealed a significant reduction in the interfacial charge transfer resistance and a marked improvement in the charge carrier separation efficiency. Photocatalytic performance evaluation indicated that under simulated solar irradiation, BV/SN/BS(1 h) achieved a Cr(VI) reduction rate constant (0.07032 min −1 ) over 15 times higher than that of pure BiVO 4 and a TC degradation rate constant (0.00520 min −1 ) approximately 1.3 times higher. In the Cr(VI)-TC combined system, a significant synergistic degradation effect was observed, with the Cr(VI) reduction rate constant further increasing to 0.09252 min −1 and the TC degradation rate constant rising to 0.01471 min −1 . Notably, EPR tests did not detect •O 2 − or •OH radicals. DFT calculations combined with experimental characterization revealed the formation of a type-II heterojunction among BiVO 4 , SnS 2 and Bi 2 S 3 , in which electrons and holes migrate in opposite directions, achieving efficient charge carrier separation. Cr(VI) and TC act as mutual sacrificial agents during the reaction process, further enhancing the photocatalytic efficiency. This study provides a novel material construction strategy and theoretical basis for designing efficient photocatalytic systems aimed at the synergistic degradation of heavy metal-organic pollutants from complex water bodies.

CAS / MDL: 64-75-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2026 · IF 10.7

Sodium acetate trihydrate phase change material with low undercooling

Haiquan Zhang,Minglei Lv,Lujing Zhang,Shen Lan,Zhinan Zhao,Ning Wang

Sodium acetate trihydrate (SAT), as a typical inorganic hydrated salt, has attracted significant attention in the field of low–temperature thermal energy storage. However, its practical applications are limited by severe supercooling, phase segregation, and leakage issues. In this study, a modified phase change material (SAT–SS) with low supercooling (4.1 °C) was prepared using SAT as the phase change material and anhydrous sodium sulfate (SS) as the nucleating agent. Subsequently, expanded graphite (EG) was incorporated into the SAT–SS system via melt blending, yielding a novel form–stable phase change material (FSPCM). The prepared composite exhibited a phase change enthalpy of 221.1 J g −1 , a supercooling degree of 1.7 °C, and a thermal conductivity of 1.082 W m −1   °C −1 . The introduction of the porous EG matrix significantly enhanced the its resistance to liquid leakage and thermal cycling stability. Even after 200 thermal cycles, it retained a high phase change enthalpy with a thermal loss rate of only 3.6%. The prepared composite demonstrates excellent comprehensive performance and holds great potential for applications in building energy efficiency.

CAS / MDL: 7601-54-9 7647-14-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2026 · IF 8.7

Morphology-regulated Pickering emulsions stabilized by soybean residue-derived nanocellulose for tunable-release bio-based food packaging

Yanyi Xue,Xinyi Zheng,Yuhang Sun,Yishuai Fu,Long Xing,Junwen Pu,Wenliang Wang

Nanocellulose morphology significantly regulated Pickering emulsion properties. • CMCS/L-CNCs formed a robust interfacial shell for long-term LEO release. • Strong CS-droplet interactions reconfigured and reinforced the film network. • Non-Fickian mechanism co-governed by swelling and diffusion enabled tuned release. • Entirely bio-based coatings effectively reduced postharvest loss of blueberries. Biomass-based active packaging enables precise and simultaneous control over both interfacial stabilization and the release behavior of volatile bioactive compounds. In this study, fully biomass-based sustained-release films were fabricated via the encapsulation of lemon essential oil (LEO) within Pickering emulsions stabilized by the soybean residue-derived nanocellulose with distinct morphologies. Specifically, the LEO-loaded Pickering emulsions were fabricated using 0.2–0.6 wt% nanocellulose and carboxymethyl chitosan (CMCS) at a 1:5 (w/w) ratio, with a 3:7 (v/v) oil-to-water ratio and a beeswax-to-LEO ratio of 1:1 (v/v). Rigid particle shells were formed by CMCS/nanocellulose complexes through morphology-dependent interfacial packing, thereby generating uniform droplets and substantially enhancing emulsion stability. When incorporated into chitosan (CS), these emulsions reconfigured and reinforced the internal film network, which enabled tunable mechanical, barrier, and release properties. Films incorporated with 2 wt% CMCS/long rod-shaped cellulose nanocrystals (L-CNCs) Pickering emulsion exhibited a more compact microstructure, higher tensile strength (20.38 MPa), lower water vapor permeability (7.30 × 10 −7  g/m·s·Pa), and slower LEO diffusion, which was attributed to strengthened CS-particle interfacial interactions. When applied as edible coatings, the films effectively delayed blueberry senescence by reducing weight loss and preserving firmness and titratable acidity for up to 14 days. Overall, this work provides mechanistic insights into morphology-regulated interfacial assembly and offers a scalable strategy for the development of green packaging films with tunable sustained-release behavior. Download: Download high-res image (217KB) Download: Download full-size image

CAS / MDL: 1898-66-4 9012-76-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。