POLYMER COMPOSITES
·
2026
·
IF 4.7
Kaidong Zheng,Haixiao Hu,Xiaoyu Yan,Hongda Chen,Ruiqi Li,Yu Zhang,Bin Ke,Dongfeng Cao,Shuxin Li
Recent research on impact responses of hybrid laminates composed of thick and thin plies, in particular the quantitative analysis of impact damage characteristics, is limited. This study conducts extensive experiments to examine the influence of the ply-level hybridization design on the low-velocity impact (LVI) and compressive after impact (CAI) response, with a focus on the material valuations, such as quasi-isotropic composite structure, and engineering applications, including the wing spars of the Boeing 787 aircraft. The impact damage characteristics are analyzed both qualitatively and quantitatively using ultrasound C-scan inspections and de-ply experiments. Results demonstrate the improvement of impact damage resistance of laminated composites using a ply-level hybridization, as evidenced by increased damage threshold loads and reduced impact dent depths, and also indicate that the projected delamination area is not suitable as an indicator for evaluating the impact damage resistance of hybrid laminates. Meanwhile, the adaptability of ply-level hybridization design in engineering has been revealed in terms of fiber breakages and residual properties. These findings suggest that ply-level hybridization should be applied cautiously when fiber breakage critically affects the damage tolerance of laminated composites. Highlights Ply-level hybridization improves impact damage resistance of laminates. First quantitative evaluation of impact damages for hybrid laminates. The adaptability of ply-level hybridization in engineering is studied. Highlight the limitation of delamination size in assessing impact resistance.
✓ 已验证
DOI
高影响因子
POLYMER COMPOSITES
·
2026
·
IF 4.7
Ho Seok Lee,Seung Hwan Chang
This study experimentally investigates the fatigue behavior of a hybrid bone plate made of a carbon fiber (CF)/nylon non-degradable biocompatible composite and a phytic acid coated magnesium (Mg) wire/polylactic acid (PLA) biodegradable composite. Hybrid structures are fabricated using successive 3D printing and thermoforming techniques. To evaluate the effect of stress in the hybrid bone plate on the fatigue behavior under wet conditions, an eccentric compression fatigue test of a simple beam-type sandwich specimen with the same composite as the hybrid bone plate is conducted by considering the human gait. In the beam-type hybrid specimen, no significant damage or cracking is observed after 200,000 cycles under wet and dry conditions. However, moisture deteriorates the structural integrity of the hybrid bone plate when a repetitive load of 30–70 N is applied, showing a 50% higher amplitude than that of the dry condition; after 60,000 cycles, noticeable cracks and corresponding unstable fatigue behavior are observed. This is attributed to the imperfect bonding between the two composites and the fastening condition of the screws, which should be considered in the fabrication of specimens and fatigue tests for the human body environment. Highlights The hybrid composites composed of Mg wire/PLA and CF/nylon are investigated. An eccentric compression fatigue test of sandwich specimens is introduced. The hybrid specimens have sufficient fatigue resistance under the swing phase. Amplitude of specimens increases by 50% under wet condition after 60,000 cycles.
✓ 已验证
DOI
高影响因子
ChemNanoMat
·
2026
·Vol. 12
·期 2
·e202500736
·
IF 2.6
Jiaxin Liu,Bo Gao,Yuning Liang,Lei Xu,Weiqian Kong,Yonglong Zhu,Qun Xu
With the rapid development of spintronics, ferromagnetic nanomaterials have shown critical unique advantages in the fields of information storage and quantum computation. The ABO 3 -type perovskite oxide SrSnO 3 is expected to realize room-temperature ferromagnetism (RTFM) due to its tunable crystal structure and unique electron arrangement. However, developing stable RTFM in transition metal-free SrSnO 3 remains a long-standing challenge—traditional strategies often cause lattice damage or impurity residues, failing to balance structural integrity and ferromagnetic performance. In this process, the precise supercritical CO 2 (SC CO 2 )-induced strain effect can lead to stretching in the a-axis direction while synchronously realizing repair of oxygen vacancies, forming a synergistic regulation of lattice structure and defect states. In addition, combining the systematic optimization of change in the crystal size to ultimately successfully realize the RTFM in SrSnO 3 ( T c = 400 K, M s = 0.019 emu g −1 ) can be presented. Therefore, this study establishes a new strategy for the development of transition metal-free ferromagnetic materials for the application of spintronic devices at room temperature, which not only enriches the technical toolbox for designing transition metal-free ferromagnetic perovskites but also provides a feasible pathway for their practical application in next-generation spintronic devices.
✓ 已验证
产品关联
DOI
高影响因子
ChemNanoMat
·
2026
·Vol. 12
·期 2
·e202500486
·
IF 2.6
Jing Li,Siyuan Li,Xu Liu,Ligang Wang
This study presents the development of nitrogen-doped carbon sphere/SnS 2 nanocomposites (SnS 2 @NCS) as efficient platinum-free counter electrodes for dye-sensitized solar cells (DSSCs). Nitrogen doping introduces topological defects into the carbon matrix, facilitating the epitaxial growth of ultrathin SnS 2 nanosheets into hierarchical architectures. The optimized SnS 2 @NCS electrode exhibits significantly enhanced catalytic activity, demonstrated by a low charge–transfer resistance of 1.070 Ω cm −2 (representing a 74.6% reduction compared to the undoped SnS 2 @CS) and achieves a power conversion efficiency of 8.18%, rivaling that of platinum-based counterparts. The improved performance is attributed to synergistic effects arising from C N bonds and SnS 2 nanosheets, which collectively enhance interfacial charge transport and electrolyte infiltration. This work demonstrates a cost-effective strategy for fabricating high-performance DSSCs.
✓ 已验证
DOI
高影响因子
Chemistry-An Asian Journal
·
2026
·Vol. 21
·期 5
·e70648
·
IF 3.2
Heng Chen,Yilin Wang,Tingting Lv,Liujie Wang,Guo Jiao,Li Li,Laiping Zhang,Jiangju Si,Hui Wang
Porous carbons (YZPCs) with self-doped heteroatoms (oxygen and nitrogen) were successfully prepared from mixed Chinese herbal medicinal residues via a simple KOH activation process under a nitrogen atmosphere. The resulting carbon exhibits a high specific surface area of 3359 m 2 ·g −1 and a hierarchical pore structure, which together provide abundant active sites for charge storage and facilitate rapid ion transport. Moreover, the substantial pseudocapacitance derived from the self-doped heteroatoms (N: 1.89 at%; O: 16.11 at%) further enhances the overall specific capacitance. The corresponding electrode delivers a specific capacitance of 344 F·g −1 at 1 A·g −1 , 270 F·g −1 at 10 A·g −1 , along with excellent cycling stability (96% capacitance retention after 10,000 cycles at 10 A·g −1 ). Overall, this study demonstrates the potential of the proposed method as an effective and low-cost approach to fabricate high-performance supercapacitors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ChemNanoMat
·
2026
·Vol. 12
·期 1
·e202500755
·
IF 2.6
Xihui Yang,Dapeng Meng,HaoZe Liu,Zikun Yang,Anyu Zhang,Zhao Wang
The catalytic performance of metal oxides is profoundly influenced by their crystal phase, yet the underlying mechanism often remains elusive. Herein, we systematically investigate the crystal-phase-dependent activity of indium oxide (In 2 O 3 ) for the electrocatalytic CO 2 reduction reaction (CO 2 RR) to formate. Through a solvent-controlled hydrothermal synthesis, we prepared phase-pure cubic (c-In 2 O 3 ) and hexagonal (h-In 2 O 3 ) polymorphs. Electrochemical evaluations reveal that h-In 2 O 3 significantly outperforms c-In 2 O 3 , achieving a superior formate Faradaic efficiency of 86.3% at −0.8 V versus reversible hydrogen electrode and demonstrating a notably higher partial current density across a wide potential window. In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy identifies a more intense signal for the *OCHO intermediate on h-In 2 O 3 , indicating facilitated reaction kinetics. Density functional theory calculations reveal the origin of this enhancement: the predominant (104) facet of h-In 2 O 3 not only strengthens CO 2 adsorption but also significantly lowers the energy barrier for the formation of the *OCHO intermediate, the rate-determining step. Furthermore, this facet concurrently suppresses the competing hydrogen evolution reaction and CO pathway. This work elucidates the intrinsic advantages of the hexagonal phase in In 2 O 3 -based CO 2 RR electrocatalysts, providing a fundamental principle for catalyst design via crystal-phase engineering.
✓ 已验证
DOI
高影响因子
ChemNanoMat
·
2026
·Vol. 12
·期 2
·e70200
·
IF 2.6
Zirui Huang,Chifei He,Yuekuan Sun,Wenjuan Liu
Micro/nanomotors (MNMs) hold significant promise for environmental remediation, yet their practical deployment remains constrained by limited propulsion efficiency, high fabrication costs, and complex manufacturing processes. Herein, we report a facile redox reaction coupled with an in situ deposition strategy for the scalable fabrication of three-dimensional flower-like MnO 2 /NiM layered double hydroxide (LDH) micromotors (M = Al, Fe, or Co) for efficient tetracycline removal. Powered by hydrogen peroxide, MnO 2 catalytically decomposes H 2 O 2 to generate oxygen bubbles, which serve as the driving force for autonomous motion. Under the conditions of 3% H 2 O 2 and 0.5% SDS, the MnO 2 /NiM-LDH micromotors exhibit good propulsion performance, achieving maximum speeds of 349.9, 244.2, and 27.3 μm/s for M = Al, Fe, and Co, respectively. During the catalytic process, reactive free radicals are generated, enabling effective tetracycline degradation. Notably, the addition of surfactants induces the accumulation of oxygen bubbles on the solution surface. This phenomenon promotes the contact between micromotors and tetracycline, thereby facilitating degradation and separation. In the test system, the MnO 2 /NiCo-LDH micromotors exhibit outstanding performance, with up to 93.3% removal of tetracycline (100 mg/L) in neutral water. This work highlights their significant potential in the environmental remediation of organic pollutants.
✓ 已验证
产品关联
DOI
高影响因子
Chemistry-An Asian Journal
·
2026
·Vol. 21
·期 2
·e00941
·
IF 3.3
Jing-Han Li,Shuai Chen,Hao-Yang Ding,Ru-Xin Tian,Ikram Ullah,Ming Qi,Tania Tofaz,Sadia Habib,An-Wu Xu
Hydrogen (H 2 ) has been considered as a potential alternative energy candidate because it has high energy storage capacity and no hazardous by-products are produced upon its combustion; the production of H 2 via the photocatalytic alcohol reforming has motivated a broad research interest. Here, we develop TiO 2 photocatalyst coupled with photoacid generator (PAG) for significantly augmented photocatalytic H 2 generation by catalytic reforming of neat methanol. The H 2 evolution rate over TiO 2 -PAG is 1412.4 µmol g −1 h −1 , which is 3.5 times higher than bare TiO 2 (397.4 µmol g −1 h −1 ). The optimal sample exhibits an apparent quantum yield (AQY) of 5.68% at λ = 365 nm. The enhancement of the photocatalytic performance is due to abundant H + ions generated from α-hydrogen abstraction by PAG, which can be effectively combined with photoinduced electrons from TiO 2 and reduced to H 2 . In addition, strong metal-support interaction (SMSI) between Pt and TiO 2 removes adsorbed H 2 from the surface of Pt─TiO 2 , keeping the surface fresh and maintaining high efficiency and excellent recycling stability of obtained photocatalysts. The combination of the two emerging functional materials represents a simple but economical and powerful approach for highly efficient methanol photocatalytic reforming into hydrogen.
✓ 已验证
DOI
高影响因子
Matter
·
2026
·Vol. 9
·期 3
·
IF 17.5
Jiabao Feng,Pan Gao,Wang Zhang,Ronald G. Larson,Yin Zhang,Guangxian Li,Miqiu Kong,Wei Pu
Despite significant advances in gecko-inspired adhesives, there is still a big challenge to achieve superior surface adaptability and strong adhesion—particularly on rough surfaces. In this work, we design a “molecular hairs” branched adhesive, yielding strong adhesion on rough surfaces (280.6 kPa), easy detachment (1.3 kPa), and ultra-low preload (∼0.3 kPa), using temperature to regulate melting and crystallization of the molecular hairs. These impressive capabilities stem from enhanced wettability, nanoscale molecular interactions with the target surfaces, and highly tunable stiffness (1.97 kPa–149.3 MPa), which allow consistent conformability to rough surfaces. Embedding this adhesive into the footpads of a surface-adaptive robot enables it to climb vertically on smooth and rough surfaces. Our research represents a breakthrough in adhesive design, offering climbing robots unprecedented stability and minimal preload on rough surfaces.
✓ 已验证
DOI
高影响因子
Device
·
2026
·Vol. 4
·期 2
·
IF 8.7
Yi-Zhou Chen,Hao-Nan Li,Jia-Hui Xin,Ling-Shu Wan,Hao-Cheng Yang,Seth B. Darling,Zhi-Kang Xu
The low Li + concentration and the abundance of competing ions limit the efficiency of lithium extraction from seawater. In this work, we report a solar-powered seesaw extractor (SPSE) to boost Li + adsorption while minimizing scaling caused by competing ions during photothermal evaporation. The SPSE features a sandwich architecture, with a hydrophilic adsorbent layer placed between two hydrophobic photothermal layers. The seesaw configuration enables Li + to be elevated and concentrated through evaporation to overcome sluggish adsorption kinetics, while the associated salt scaling is removed by the seesawing motion. As a demonstration, we assembled 60 SPSEs into a 3 × 20 array that achieved a 15.5-fold increase in local Li + concentration and a 69.1% improvement in Li + uptake over 120 h, with a Li + /Na + separation factor exceeding 370,000.
✓ 已验证
产品关联
DOI
高影响因子
Matter
·
2026
·Vol. 9
·期 3
·
IF 15.7
Shangzhen Li,Lei Lei,Ziyi Su,Derong Zhang,Tongxin Liao,Yuqing Sun,Zhiyan Liu,Yanzheng Liu,Jin Wang,Rong Chen,Lei Wang
Escalating water shortages and energy insecurity pose severe threats to global sustainable development. Acid-base neutralization is a routine process in industrial production and wastewater treatment. Efficiently harvesting chemical energy released during neutralization, along with produced water, is significant for addressing the challenges of the water and energy crisis. Here, inspired by bamboo—the fastest growing plant on Earth owing to its highly ordered structure—we developed a biomimetic Ti 3 C 2 T x nanochannel membrane exhibiting ultrafast and selective proton transport. When mixing 0.03 M HCl and 0.5 M NaOH, the Ti 3 C 2 T x -based nanofluidic system can produce clean water of 7.83 × 10 3 L·m −2 ·h −1 , accompanied by spontaneous electricity generation with a power density of 6.7 W/m 2 , which also maintains stable performance under scaled-up conditions. Our membrane outperforms state-of-the-art nanochannel membranes in water and energy recovery, offering a promising pathway toward integrated solutions to the water-energy nexus.
✓ 已验证
DOI
高影响因子
Matter
·
2026
·Vol. 9
·期 3
·
IF 15.7
Yunxia Hu,Mohsen Tamtaji,Mingjin Dai,Tsz Wing Tang,Jinghan Shen,Jun Wang,Zhaoli Gao,Nan Zhang,Liang An,Zhengtang Luo
The van der Waals (vdWs) integration of two-dimensional (2D) materials offers a versatile fabrication possibility for next-generation image sensors. However, there is a conflict between the desired small channel length and lateral device structures, superseding the depletion region, with a large footprint. Here, we propose a vdWs-integrated crossbar array structure utilizing a vertical 1T′/2H-MoTe 2 /ITO structure for visible and near-infrared imaging. Such a crossbar design employs 2H-MoTe 2 layers as a vertical and adjustable atomic-scale channel with a large illumination area, which in turn effectively enhances the photoresponse. Additionally, the asymmetric electrode contacts consist of an ohmic contact in the 1T′/2H-MoTe 2 homojunction and a Schottky contact on the other side, contributing to self-powered photodetection. With these designs, the self-powered responsivity and detectivity reach 4.6 A W −1 and 5.8 × 10 13 cm Hz 1/2 W −1 with 23-nm channel thickness. This vdWs-integrated image sensor provides an alternative strategy for solving optimal performance and integration problems of 2D materials for the advancement of optoelectronics.
✓ 已验证
DOI
高影响因子