Matter
·
2026
·Vol. 9
·期 3
·
IF 15.7
Hang Liu,Xiao Liu,Yuxin Gao,Yi Yu,Zhang Liu,Pengmin Wang,Bin Shan,Rong Chen
Conventional methods to mitigate surface active sites dissolution in Pt-based fuel cell catalysts (Pt/C) often lead to loss of electrochemically active surface areas or dealloying. Here, we report a strategy via atomic layer deposition to precisely introduce a nonmetallic single-atom electron pump into unstable Pt subsurface, regulating oxygen adsorption and inhibiting inward diffusion. Boron single atoms significantly enhance Pt dissolution resistance, resulting in an initial peak power density of 1.76 W cm −2 for Pt/C, only 16.8% mass activity loss after 30,000 cycles test (projected lifetime >30,000 h, exceeding DOE 2025 targets), and ultrahigh stability over 200 h rated operation with negligible current declines. In situ characterizations and DFT calculations reveal that subsurface-doped-boron-induced asymmetric strain weakens oxygen species adsorption, blocks oxygen penetration, and continually pumps electrons to surface unsaturated Pt sites to suppress oxidation dissolution. This work provides a generalizable and scalable approach for stabilizing Pt-based catalysts through atomic-level subsurface engineering.
✓ 已验证
DOI
高影响因子
Joule
·
2026
·
IF 37.1
Bosheng Zhao,Dongsheng Ren,Deqing Li,Hongkun Pan,Yi Guo,Qianfan Pei,Xinyu Rui,Dechang Wang,Jinli Liu,Feixiong He,Peng Huang,Tiening Tan,Gaolong Zhu,Jianfeng Hua,Xiang Liu,Languang Lu,Minggao Ouyang
All-solid-state batteries (ASSBs) incorporating Ni-rich cathodes and sulfide solid electrolytes are promising for next-generation energy storage. However, their performance is constrained by the inherent electrochemo-mechanical instability and sluggish Li + diffusion kinetics in the randomly oriented Ni-rich cathodes. Herein, we present a microstructure-tailored Ni-rich cathode with fast Li + diffusion layer through regulation of primary particle size and distribution. Comprehensive investigations demonstrate that this optimized Ni-rich cathode enables rapid Li + transport kinetics and effectively accommodates strain accumulation during cycling. Furthermore, an in situ -formed Li 2 CO 3 coating on the cathode surface provides robust passivation against sulfide electrolyte decomposition at the interface. Consequently, sulfide-based ASSBs employing this Ni-rich cathode exhibit a high reversible capacity of 233.8 mAh g −1 and remarkable capacity retention of 79% after 1,000 cycles at 1 C and 71% after 10,000 cycles at 5 C. This work provides an effective and scalable strategy for designing high-performance Ni-rich cathodes, paving the way for high-energy-density and long-lifespan ASSBs.
✓ 已验证
产品关联
DOI
高影响因子
Cell Reports Physical Science
·
2026
·
IF 6.9
Qi Yi,Yi-Qi Sheng,Dong-Qi Han,Xue-Wei Lin,Chi-Kit Siu,Zhong-Ping Yao
Chiral recognition in mass spectrometry typically relies on one chiral selector (CS) to distinguish enantiomers through dissociation of diastereomeric complexes. Here, we report an innovative approach employing two different CSs to form trimeric complexes with analytes in the presence of Cu 2+ . Nineteen proteinogenic chiral amino acids are investigated as both analytes and selectors, and complexes involving proline and aromatic amino acids exhibit superior chiral discrimination. Notably, the two selectors can play distinct roles: one plays an anchoring role, while the other only contributes to the degree of discrimination. Computational modeling reveals that the copper-bound trimers (e.g., [Cu II (Pro)(Phe)(Tyr) − H] + ) adopt a pentacoordinated geometry with a square-planar base and an elongated axial bond. Three energetically similar precursor structures co-exist, with dissociation occurring exclusively at the axial position. The strong agreement between experimental and computational results validates this binary CS concept and provides a framework for designing advanced CSs for unknown samples.
✓ 已验证
产品关联
DOI
高影响因子
Royal Society Open Science
·
2025
·Vol. 12
·期 11
·
IF 2.9
Omar Mirna,Omar Sarah,El-Subruiti Gehan M.,Attia Nour F.,Eltaweil Abdelazeem
With growing concerns over water pollution and depletion of freshwater resources, finding sustainable and cost-effective solutions for water treatment is crucial. This study introduces a novel MIL-53(Fe)/Mn-doped SrTiO3 (MIL-53(Fe)/Mn-STO) direct Z-scheme photocatalyst, designed to efficiently degrade organic contaminants in water. Specifically, the photocatalytic degradation of o-nitrophenol (ONP) was investigated under an Xe lamp. The MIL-53(Fe)/Mn-STO photocatalyst demonstrated a maximum removal efficiency of 97.75% within 90 min, with a rate constant (k) of 0.0374 min−1, outperforming the individual MIL-53(Fe) and Mn-STO photocatalysts. A comprehensive analysis of the material’s properties was conducted using Fourier transform Infrared spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy, diffuse reflectance spectroscopy and photoluminescence techniques, and the photocatalytic activity was evaluated under various conditions, including variations in pH, ONP concentration, catalyst dosage and the presence of inorganic anions. The improved photocatalytic activity of the MIL-53(Fe)/Mn-STO system can be ascribed to the synergistic interaction between its two components, which also contributed to its excellent recyclability over five cycles. These findings demonstrate that MIL-53(Fe)/Mn-STO is a highly effective and sustainable photocatalyst with a strong potential for wastewater treatment applications.
✓ 已验证
DOI
PubMed
高影响因子
Interface Focus
·
2020
·Vol. 10
·期 3
·
IF 3.514
Foster Russell G.
At the core of human thought, for the majority of individuals in the developed nations at least, there is the tacit assumption that as a species we are unfettered by the demands imposed by our biology and that we can do what we want, at whatever time we choose, whereas in reality every aspect of our physiology and behaviour is constrained by a 24 h beat arising from deep within our evolution. Our daily circadian rhythms and sleep/wake cycle allow us to function optimally in a dynamic world, adjusting our biology to the demands imposed by the day/night cycle. The themes developed in this review focus upon the growing realization that we ignore the circadian and sleep systems at our peril, and this paper considers the mechanisms that generate and regulate circadian and sleep systems; what happens mechanistically when these systems collapse as a result of societal pressures and disease; how sleep disruption and stress are linked; why sleep disruption and mental illness invariably occur together; and how individuals and employers can attempt to mitigate some of the problems associated with working against our internal temporal biology. While some of the health costs of sleep disruption can be reduced, in the short-term at least, there will always be significant negative consequences associated with shift work and sleep loss. With this in mind, society needs to address this issue and decide when the consequences of sleep disruption are justified in the workplace.
✓ 已验证
DOI
PubMed
高影响因子
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
·
2026
·Vol. 123
·期 9
·e2533803123
·
IF 9.5
Guobin Wen,Haiqi Liang,Shuxuan Liu,Ningce Zhang,Shuai Chen,Guoqiang Shen,Tehua Wang,Ru Chen,Li Tao,Bohua Ren,Shuangyin Wang
Electrochemical hydrogen isotope separation has been constrained for decades by the similar energy barriers of the rate-determining O–H and O–D bond cleavage step in water isotopologues. Herein, we compact H-bond connectivity through screening a series of additives to stimulate electrochemical proton quantum tunneling (QT) behaviors of “through-barrier”, which are virtually impossible for heavier D-relevant motions. The average H-bond length of H2O⋯OH− is 3.4% shorter (2.78 Å) with isopropanol additive at the engineered interface. Fundamentally, QT effects are magnified by selectively promoting proton transfer-involved reactions through strengthening the H-bond and filling the H-bond gap, which are further proved by both experimental Arrhenius plots with near small-curvature tunneling approximation and a stronger proton excursion in path integral molecular dynamics simulations. Hence, a record-high H2O separation factor of 276 is realized at room temperature with a three-order-of-magnitude growth of H/D kinetic isotope effect constant up to 10,165. Significantly, a large-scale multistage reactor is engineered to obtain continuous enrichment of heavy water with a deuterium atomic fraction over 80%.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
·
2026
·Vol. 123
·期 5
·e2522028123
·
IF 9.1
Yongpeng Liang,Haochen Han,Yuewei Zhao,Wenjun Yu,Huiying Chen,Jiachuan Liu,Haojie Jin,Yangfan Xu,Wei Chen,Kun Qian,Xiangdong Yao,Lin Huang,Xiao-Ming Chen
Thymic epithelial tumors (TETs), rare yet clinically significant malignancies, face diagnostic challenges due to their occult presentation and lack of noninvasive risk-stratification tools, leading to systemic overtreatment and poor prognoses for high-risk subtypes. To address this unmet need, we developed a Fe3O4@Fe metal–organic framework heterojunction-enhanced laser desorption ionization mass spectrometry (LDI MS) platform for the efficient analysis of serum metabolic fingerprints (SMFs). Engineered through gradient pyrolysis, this nanomaterial synergizes ultraviolet absorption and photothermal conversion from its two constituent components with enhanced charge separation, achieving 1,000-fold improvement in sensitivity and thus enabling direct SMF acquisition from 1 μL of serum. Coupled with machine learning, the platform demonstrates robust diagnostic performance, yielding area under the curve (AUC) of 0.960 for distinguishing TETs from benign control and AUC of 0.856 for hierarchical risk stratification, outperforming clinical workflows. Beyond advancing material design for LDI MS, this work establishes a clinically translatable framework for rapid, large-scale screening, addressing critical gaps in TET management through metabolic-driven stratification.
✓ 已验证
DOI
高影响因子
NANO
·
2025
·
IF 1.1
Zihao Xu,Shuxian Hou,Yao Xiao,Yimei Wang,Xuechao Shi,Jiantao Wang,Ming He,Lei Zhang,Weiwei Zhang,Wanzhen Li,Fei Ge,Jun Wang
Bacterial infections are major challenges in global public health currently, it is particularly important to develop novel, efficient and environment-friendly antibacterial methods. In this study, PEG and PEI co-modified superparamagnetic iron oxide nanoparticles (PEG/PEI-SPIONs) with high crystallinity were prepared by ultra-simple high-temperature thermal decomposition reaction. Modification with PEG and PEI enhanced the water solubility and stability of the SPIONs. The experimental results showed that PEG/PEI-SPIONs exhibited good photocatalytic inhibitory effects against S. aureus and E. coli , and a dose-dependent antibacterial activity. The antibacterial activity of PEG/PEI-SPIONs were significantly enhanced under xenon lamp irradiation. The main antibacterial mechanisms of PEG/PEI-SPIONs primarily involve biofilm inhibition and destruction, and inducing the production of reactive oxygen species, resulting in the death of the bacteria. The PEG/PEI-SPIONs constructed in this study are expected to replace antibiotics in the fight against bacterial infections.
✓ 已验证
DOI
高影响因子
Functional Materials Letters
·
2026
·
IF 1
Xiaoya Feng,Chuan Wang,Fengjie He,Hongbo Mo,Peng Lei,Li Ran,Weigang Fan,Peiwen Hu,Yuhu Zhang,Fan Lu
The efficient removal and selective recognition of pharmaceutical residues from aquatic systems remains a critical challenge in green analytical chemistry. Here, we report magnetic molecularly imprinted polymers (DES-MMIPs) synthesized using a deep eutectic solvent (DES; choline chloride/methacrylic acid) as a green functional monomer for targeted adsorption and detection of ibuprofen (IBP). Vinyl-modified Fe 3 O 4 nanoparticles serve as magnetic supports in a precipitation polymerization system. The resulting material exhibits a rough surface with well-defined imprinted cavities and sufficient magnetic responsiveness (saturation magnetization = 6.29 emu·g -1 ). Under optimized conditions, DES-MMIPs achieve an IBP adsorption capacity of 77.68 mg·g -1 -1.94 times that of non-imprinted polymers-reaching equilibrium within 80 min. Adsorption follows the Langmuir model (Q max = 151.52 mg·g -1 ) and pseudo-second-order kinetics (R 2 = 0.9820), consistent with monolayer chemisorption. DES-MMIPs show high selectivity, maintain performance in the presence of coexisting ions and humic acid, and retain 96.6% capacity over five adsorption–desorption cycles. This work establishes a sustainable molecular imprinting platform based on DES monomers for efficient extraction and monitoring of trace organic pollutants in complex aqueous environments.
✓ 已验证
产品关联
DOI
高影响因子
NANO
·
2025
·
IF 1.1
Zhenyu Yang,Jiandong Yang,Yan Chen,Wenhui Zhang,Feng Lin,Wenshu Yang,Wuyou Fu
Compared to organic–inorganic hybrid perovskite solar cells (PSCs), all inorganic CsPbBr 3 perovskite solar cells have higher stability but lower efficiency. Owing to the low solid solubility of CsBr in methyl alcohol, an incomplete first-step reaction with PbBr 2 reaction takes place at room temperature. As a result, a large amount of CsPb 2 Br 5 is generated in the final CsPbBr 3 film, which deteriorates the performance of CsPbBr 3 PSCs. Along these lines, in this work, CsCl was added to increase the reaction between CsBr and PbBr 2 in the first step and high-quality CsPbBr 3 films were prepared without CsPb 2 Br 5 . Our analysis demonstrated that at the optimal CsCl concentration of 6% in CsBr solution, the CsPbBr 3 perovskite solar cells exhibited a power conversion efficiency of 7.33%. The best device retained 98.57% of the power conversion efficiency (PCE) after storing it for 30 days under ambient air condition.
✓ 已验证
DOI
高影响因子
Catalysts
·
2025
·Vol. 15
·期 10
·923
·
IF 4
Yinkun Gao,Mingyang Liu,Yongqing Wan,Shuyun Guan,Yiman Ma,Xiaojie Xu,Yongming Zhu,Xudong Li
Lithium-oxygen batteries (LOBs) are limited by sluggish oxygen redox kinetics and cathode instability. Herein, we report a cobalt particle catalyst encapsulated in nitrogen-doped carbon (Co@NC) with a three-dimensional hierarchical architecture, synthesized via a chitosan-derived hierarchical porous carbon framework. This innovative design integrates uniformly dispersed ultra-thin carbon shells (11.7 nm), pyridinic nitrogen doping, and Co particles (1.41 μm) stabilized through carbon-support electronic coupling. The hierarchical porosity facilitates rapid O2/Li+mass transport, while pyridinic N sites act as dual-function electrocatalytic centers for Li2O2nucleation and charge transfer kinetics. Co@NC achieves 11,213 mAh g−1at 200 mA g−1(126.5% higher than nitrogen-doped carbon) and maintains 1.54 V overpotential (500 mAh g−1). These metrics outperform benchmark catalysts, addressing kinetic and stability challenges in LOBs. The study advances electrocatalyst design by integrating structural optimization, heteroatom doping, and electronic coupling strategies for high-performance metal–air batteries.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Siyu Sun,Yifan Zhang,Jun Wu,Rui Yan,Feng Zhang,Chen Wen
The selective electrocatalytic oxidation of glycerol (GOR) into high-value chemicals is crucial for sustainable biorefineries, yet achieving high selectivity, particularly for C1 products like formic acid, remains a significant challenge. Herein, we report the rational design and facile one-step hydrothermal synthesis of ZrO2@Co-MOF heterostructures, where ZrO2 nanoparticles act as core sites influencing Co-MOF growth. The optimized ZrO2@Co-MOF(0.11) catalyst exhibits unprecedented performance for GOR, achieving 98.7% selectivity and near-unity faradaic efficiency for formic acid production at industrially relevant current densities, alongside excellent long-term stability. Comprehensive electrochemical evaluations, ex situ characterization methods, and in situ/operando spectroscopic investigations reveal a pivotal innovation: the ZrO2 interface not only modulates the electronic structure of Co centers and tailors MOF morphology but, critically, directs and stabilizes the in situ electrochemical reconstruction of the Co-MOF into highly active CoOOH/Co(COO)2 species. Furthermore, theoretical calculations elucidate that this engineered interface significantly lowers the energy barrier for critical C–C bond cleavage (ΔG = 0.03 eV), thereby suppressing C3 intermediates and driving the reaction pathway selectively toward formic acid. This work unveils a powerful strategy in hetero-interfacial engineering of MOF-derived materials for precise and efficient biomass valorization.
✓ 已验证
产品关联
DOI
高影响因子